Hey guys, I got tired of typing in my commands everytime I wanted to build a new version of CM7. So I whipped this up, it even edits and updates the build.prop in the zip with the time and your name (Just substitute it where mine is ).
ONLY RUN IF YOU HAVE BUILT ONCE BEFORE: The script could wipe out all things that have been sync if this is your first time building.
Code:
cd ~/android/system/out/target/product/inc/
rm -r *
cd ~/android/system/
repo sync
. build/envsetup.sh && brunch inc
cd ~/android/system/out/target/product/inc/system/
Day=`date +%d`
Date=`date +%D`
Month=`date +%m`
Year=`date +%y`
Minute=`date +%M`
Hour=`date +%H`
Second=`date +%S`
mv build.prop build.text
sed "s/ro.modversion=[^ ]*/ro.modversion=CyanogenMod-7.0.0-RC4-Kyle-Lucas-$Month\/$Day\/$Year-$Hour\:$Minute\:$Second/" build.text > build.prop
rm build.text
cp build.prop ~/android/system/out/target/product/inc/
cd ~/android/system/out/target/product/inc/
zip -qf update*.zip
Could it be more clean? Yeah, but it gets the job done.
Also, maybe it is just me...but my output directory has to be empty for the build to run properly. If that isn't your case remove the first 2 lines.
I would like to say thanks for posting this. Do you need a 64 bit system to compile cm 7?
I believe so. I am running one, Ubuntu 10.10 x64. I think I read somewhere that compiling android from source from 2.2 on requires 64 bit.
Someone please correct me if I'm wrong on that.
Sent from my ADR6300 using XDA Premium App
I heard 2.3 and up.
Sent from my ADR6300 using XDA Premium App
You should include a check to see if that output directory exists before calling "rm -r *"
After the initial sync, the out folder doesn't even exist, let alone anything inside that. The script nearly wiped out all the code I just downloaded... thank goodness the write-protected Makefile stopped it before it deleted .repo!
whiplash000 said:
You should include a check to see if that output directory exists before calling "rm -r *"
After the initial sync, the out folder doesn't even exist, let alone anything inside that. The script nearly wiped out all the code I just downloaded... thank goodness the write-protected Makefile stopped it before it deleted .repo!
Click to expand...
Click to collapse
Ouch, that's a good point... even 'rm -rf ~/android/system/out/target/product/inc/' should work and be a bit safer only recursively going after that directory.
EDIT: I delete the whole directory, it gets recreated on a build if it isn't there.
You can build 2.3 up if you do a few tweaks to the make file.
I have a make script that will do everything in a 32bit system.
If you guys want it I will post it.
Sent from my Incredible using XDA App
wes342 said:
You can build 2.3 up if you do a few tweaks to the make file.
I have a make script that will do everything in a 32bit system.
If you guys want it I will post it.
Sent from my Incredible using XDA App
Click to expand...
Click to collapse
That would be cool if you could post it!
whiplash000 said:
You should include a check to see if that output directory exists before calling "rm -r *"
After the initial sync, the out folder doesn't even exist, let alone anything inside that. The script nearly wiped out all the code I just downloaded... thank goodness the write-protected Makefile stopped it before it deleted .repo!
Click to expand...
Click to collapse
Whoops hadn't thought of that. I already had a build enviornment before this that had built a few times. Ill fix that up when I get home
Sent from my ADR6300 using XDA Premium App
ok guys here is the make file for 32bit systems.
just put it in your root directory.
Note: this has been changed so many times please check to make sure everything in the file will work with your system.
i have used this before and it does work.
this is not the original verision that i was working with (i lost it when my computer died) got this from a friend who made a few changes but i think i changed everything back.
1. you need to remove the ".txt" after you download the file.
2. you need to make it executable.
3. this will install a different version of java so you may need to uninstall the new java after you are done.
4. you can use this to build anything all you have to do is make a few changes to the source you want to build from.
to start the make file.
Code:
./androidmake
then in an hour or so you should have a cyanogen 7 rom.
right now it should be setup to build cyanogen 7
good luck guys. your on your own from here.
-check out our site osmasterminds-
Thanks Wes!
It ran almost all the way, then I got:
make: *** No rule to make target `out/target/product/inc/obj/lib/libcamera.so', needed by `out/target/product/inc/obj/SHARED_LIBRARIES/libcameraservice_intermediates/LINKED/libcameraservice.so'. Stop.
make: *** Waiting for unfinished jobs....
Notice file: system/core/logwrapper/NOTICE -- out/target/product/inc/obj/NOTICE_FILES/src//system/bin/logwrapper.txt
Note: Some input files use or override a deprecated API.
Note: Recompile with -Xlint:deprecation for details.
Note: Some input files use unchecked or unsafe operations.
Note: Recompile with -Xlint:unchecked for details.
cp: cannot stat `/home/treken/android/system/out/target/product/inc/update*': No such file or directory
[=-build aosp androidmake-=]
and here is some stuff before the error:
http://pastebin.com/GiNGFfR6
Treken said:
It ran almost all the way, then I got:
make: *** No rule to make target `out/target/product/inc/obj/lib/libcamera.so', needed by `out/target/product/inc/obj/SHARED_LIBRARIES/libcameraservice_intermediates/LINKED/libcameraservice.so'. Stop.
make: *** Waiting for unfinished jobs....
Notice file: system/core/logwrapper/NOTICE -- out/target/product/inc/obj/NOTICE_FILES/src//system/bin/logwrapper.txt
Note: Some input files use or override a deprecated API.
Note: Recompile with -Xlint:deprecation for details.
Note: Some input files use unchecked or unsafe operations.
Note: Recompile with -Xlint:unchecked for details.
cp: cannot stat `/home/treken/android/system/out/target/product/inc/update*': No such file or directory
[=-build aosp androidmake-=]
and here is some stuff before the error:
http://pastebin.com/GiNGFfR6
Click to expand...
Click to collapse
From your last line it looks like the packaged zip might not start with "update"...
Jazi said:
From your last line it looks like the packaged zip might not start with "update"...
Click to expand...
Click to collapse
It looks like the proprietary files are missing actually.
make: *** No rule to make target `out/target/product/inc/obj/lib/libcamera.so', needed by `out/target/product/inc/obj/SHARED_LIBRARIES/libcameraservice_intermediates/LINKED/libcameraservice.so'. Stop.
How do I fix this?
Treken said:
How do I fix this?
Click to expand...
Click to collapse
my guess would be that this part of the script didn't work:
wget http://dl.dropbox.com/u/6751304/htc.zip;
unzip htc.zip;
mv ~/htc/ ~/android/system/vendor/htc/;
So perhaps do it by hand, but honestly the more correct way would be to run the extract-files.sh script to actually grab them from your phone.
This is the guide I used to set up my build environment: http://wiki.cyanogenmod.com/index.php?title=Compile_CyanogenMod_for_Incredible. If nothing else, I know following those steps manually will get all the pieces you need.
EDIT: I just looked at the zip file that script points to and it has proprietary files for an HTC Passion, not an Inc... so yes, you're missing the proprietary files for the Inc with this script
Ok, thanks! I'll try to change it
I don't know how to change it. wget retrieves it from dropbox. I can't pull the files from my phone either because I can't seem to get adb working properly
Treken said:
I don't know how to change it. wget retrieves it from dropbox. I can't pull the files from my phone either because I can't seem to get adb working properly
Click to expand...
Click to collapse
Honestly I think it would serve you better to get a properly set up build environment by following the steps in that link I gave. If you can compile a ROM using those instructions then I would try automating it. You should make sure you can walk before you try to run.
Treken said:
I don't know how to change it. wget retrieves it from dropbox. I can't pull the files from my phone either because I can't seem to get adb working properly
Click to expand...
Click to collapse
You can also get them from here:
https://github.com/koush/proprietary_vendor_htc/tree/gingerbread/inc/proprietary
But that requires another set of skills to pull them down, at least without manually doing it one by one.
It might be smart for the original bash script to use koush's github, as it is updated with new ones as they come out.
i want to change the file "sys/devices/i2c-0/0-0066/leds/jogball-backlight/period" to "2"
to do this i have to edit the permissions for it to work, but every time i reboot it reverts back to the original file
does anyone know how i can change this file permanently?
when i change it, it says file backed up as "period.bak" but i cant find where this is backed up to
This is not a real file. This is a virtual file - interface to device driver parameters. To change it permanently, you need either to see where the initial value comes from and change it there somehow, or to overwrite the driver interface file each boot.
Don't suppose you know where the original file is?
Sent from my Nexus One using XDA App
I don't know if this will work as it is piecing together multiple responses in multiple threads, but I believe if you add a script into the /etc/init.d folder, it will run it.
I believe it needs to be called something that has numbers at the front. Something like 99setpulserate
Code:
#!/system/bin/sh
if [ -e /sys/devices/i2c-0/0-0066/leds/jogball-backlight/period ]
then
/system/xbin/echo "2" > /sys/devices/i2c-0/0-0066/leds/jogball-backlight/period;
fi;
Again, save it something like 99setpulserate and give it 777 permissions
Code:
chmod 777 /etc/init.d/99setpulserate
Hope this works. Let me know.
bassmadrigal said:
I don't know if this will work as it is piecing together multiple responses in multiple threads, but I believe if you add a script into the /etc/init.d folder, it will run it.
I believe it needs to be called something that has numbers at the front. Something like 99setpulserate
Code:
#!/system/bin/sh
if [ -e /sys/devices/i2c-0/0-0066/leds/jogball-backlight/period ]
then
/system/xbin/echo "2" > /sys/devices/i2c-0/0-0066/leds/jogball-backlight/period;
fi;
Again, save it something like 99setpulserate and give it 777 permissions
Code:
chmod 777 /etc/init.d/99setpulserate
Hope this works. Let me know.
Click to expand...
Click to collapse
sorry, 777 permissions? as in tick all of em? never mind
maxib123 said:
Don't suppose you know where the original file is?
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
Most probably it's hard-coded somewhere in the system, which would require recompiling. Overwriting the value each boot, for example with init.d scripts as suggested above, would be much simpler. Just make sure that the value is initialized by the time you're executing your script, and that the ROM is configured to run them.
Jack_R1 said:
Most probably it's hard-coded somewhere in the system, which would require recompiling. Overwriting the value each boot, for example with init.d scripts as suggested above, would be much simpler. Just make sure that the value is initialized by the time you're executing your script, and that the ROM is configured to run them.
Click to expand...
Click to collapse
how would i do that?
bassmadrigal said:
I don't know if this will work as it is piecing together multiple responses in multiple threads, but I believe if you add a script into the /etc/init.d folder, it will run it.
I believe it needs to be called something that has numbers at the front. Something like 99setpulserate
Code:
#!/system/bin/sh
if [ -e /sys/devices/i2c-0/0-0066/leds/jogball-backlight/period ]
then
/system/xbin/echo "2" > /sys/devices/i2c-0/0-0066/leds/jogball-backlight/period;
fi;
Again, save it something like 99setpulserate and give it 777 permissions
Code:
chmod 777 /etc/init.d/99setpulserate
Hope this works. Let me know.
Click to expand...
Click to collapse
just checking, does the "99setpulserate" file just need to be a new file, or do i copy it over and rename it?
I'm not exactly sure what you mean. It needs to be a new file, but you can copy the text and past it in (if you use adb, or the browser on the phone).
The numbers at the beginning are the order in which things should be run (if I remember correctly from my old linux classes, Slackware uses the RC files which is slightly different). So technically, you can pick any number, but it is best to leave user scripts at 99 so that everything that needs to get loaded beforehand can get loaded.
bassmadrigal said:
I'm not exactly sure what you mean. It needs to be a new file, but you can copy the text and past it in (if you use adb, or the browser on the phone).
The numbers at the beginning are the order in which things should be run (if I remember correctly from my old linux classes, Slackware uses the RC files which is slightly different). So technically, you can pick any number, but it is best to leave user scripts at 99 so that everything that needs to get loaded beforehand can get loaded.
Click to expand...
Click to collapse
yeh... its doesnt work :L
maxib123 said:
yeh... its doesnt work :L
Click to expand...
Click to collapse
What if you manually run the file?
Code:
sh 99setpulserate
See if it is a screwup in the script or my understanding of the init system of Android (I am leaning towards the second one, because I double checked the script and it seems fine).
bassmadrigal said:
What if you manually run the file?
Code:
sh 99setpulserate
See if it is a screwup in the script or my understanding of the init system of Android (I am leaning towards the second one, because I double checked the script and it seems fine).
Click to expand...
Click to collapse
2: not found
tried on adb and emulator
Include the full path to the script when you run it from shell.
I don't know why it wouldn't be working, but I suppose worst case, you could always just add the contents of the script (except for the first line) to the 20userinit file at the bottom.
maxib123 said:
Don't suppose you know where the original file is?
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
i can show you exactly where the source code is for this file. its the microp.c file in arch/arm/mach-msm folder of the source code kernel.
EDIT: here is the actual file source code.
https://github.com/CyanogenMod/cm-k....37/arch/arm/mach-msm/board-mahimahi-microp.c
you could possibly have someone compile a kernel with changes to this that would set it to your value so you wouldnt have to mess with it each boot up. but i havent look at the code yet to know, so i'll take a look and see.
EDIT: so it looks like when powered up this driver defines the particular data in question from this register address:
Code:
#define MICROP_I2C_WCMD_JOGBALL_LED_PERIOD_SET 0x5D
so you could easily just add some code to set it to your value of 2 upon initialization. i want to say that you can permanently set that register address to a different value. but it seems like its getting cleared upon each reboot, so your best option is to just have the code set it manually.
probably easier than compiling your own kernel would be to just create some simple BASH script that does this upon boot up. though the more fun proper way is change the code.
Jack_R1 said:
Include the full path to the script when you run it from shell.
Click to expand...
Click to collapse
Yeh I did
Sent from my Nexus One using XDA App
How about creating a pre-modified version of the period file, and have the init overwrite the current one at each boot, rather than trying to edit it in the fly...?
danger-rat said:
How about creating a pre-modified version of the period file, and have the init overwrite the current one at each boot, rather than trying to edit it in the fly...?
Click to expand...
Click to collapse
what do i need to do to do that?
If you look at that code, its not an actual file but just a virtual register read from the hardware. So your only option is to create a startup init script to write your desired value to that register (file) on boot up.
why has it changed? it used to be how i want it on the older versions of cyanogen, isnt there some files i could just take from those files and take it over?? seems like a much simpler option :L
Introduction
Hello Again! I have decided to make a series of tutorials for the XDA-University posted into this forum.
These guides will be geared toward the novice but will involve tips and instructions I hope seasoned users will find helpful as well.
Current list of guides
Fastboot Installation and Usage
All of my guides are to be considered a work in progress, only because I never consider any guide complete and will continue to update and answer questions for a long time to come.
What To Expect From This Guide
The basics on how to create a .zip to be flashed in recovery
*This will include a series of commands executed in the updater-script
And of course this means you will learn at least some basics of Edify, the basic script you will write these commands in.
I also will be adding a short section on Aroma Installer but am willing to answer questions on it use as well.
This Guide will be for Linux and Windows (Sorry Apple fanboys, not trying to be a jerk but I got to stick to my principles)
**As always I encourage questions as I am not always clear and I can easily overlook something.
What Is an update.zip?
Although this guide will cover the basics, I hope you don't need an answer to this question. I am to go over how to make one starting with some basics you will need to understand.
File Structure
There aren't many ways to setup the basic file structure and I have included a sample.zip for you to use. I find looking at one is the easiest way to understand.
To create your own it is as simple as creating a new folder named whatever you would like. Inside this folder create another new folder named exactly
META-INF
Click to expand...
Click to collapse
Now inside this folder you will create another folder named
com
Click to expand...
Click to collapse
Now another folder named
google
Click to expand...
Click to collapse
And lastly one more folder within it named
android
Click to expand...
Click to collapse
Here inside the android folder you will have two files, these need to be named exactly again
update-binary
Click to expand...
Click to collapse
and
updater-script
Click to expand...
Click to collapse
The update-binary is best to be taken from the latest OTA update from your device, chances are you are not the first to make a ROM or mod or whatever else needs to be flashed in recovery
So feel free to take this from one of those as well (these by in large are not custom made by a dev and no permission should be needed)
Structure of your update.zip should be as such:
update/META-INF/com/google/android and in this last folder will be the two scripts.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Edify
This is the language used in the scripts we are writing, It is simple, straight forward, and much more forgiving then Java for example.
This is the syntax we will use in the updater-script, the update-binary will not be edited and only will need to be copy and pasted. It is best to seek out the latest for your device
The next post will be filled with samples of commands you can use in your updater-script that will perform various functions to your device
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Tools Needed
There is no heavy computing here, old and new computers alike can handle this sort of task. I have made update.zips in both Linux and Windows with both super fast and terribly slow machines.
No I will not go over how to create your ROM or mod or whatever you are attempting to flash to your phone, I am only going to explain how to flash it.
So the list of tools needed is very small for the basics here.
Windows
I highly recommend using 7zip but yes there are other options
Another must have will be notepad ++, This really should have a tutorial for itself but I'll help with the basics
There are many tools to sign and i have just used THIS ONE forever so I'll recommend this, there are however easier ones that allow you to right click a file to sign it.
Which is amazing and I use one for my Linux box, now that I'm writing this maybe its time I change my windows one... to THIS MAYBE?
Also be sure to have the latest Java installed found HERE
And really that should cover us, there are lots of helpful apps and programs to make life easier but this will do just fine!
Linux
There are loads of tools I can recommend and variations on each one, so I will just list a few must haves to make your basic update.zip
There is a 7zip variant for Linux, use the terminal and type:
Code:
sudo apt-get install p7zip
Now you can use gedit as your text editor or i personally like Sublime Text there is a Windows compatible version too that i have yet to check out.
And we need to sign these .zips, for Linux i use This One created by Amon_RA
You will need to add this script to your nautilus script directory and name it sign
Code:
#!/bin/sh
# Update the Loc var to where YOU stored the testsign.jar file !
Loc=/home/demkantor/adt-bundle-linux-x86_64-20130219/sdk/tools
for arg
do
java -classpath "$Loc"testsign.jar testsign "$arg" "$arg"-signed
gdialog --title "signapk" --msgbox ""$arg"-signed created" 200 200
done
Be sure to change Loc=/home/demkantor/adt-bundle-linux-x86_64-20130219/sdk/tools to the proper path as yours will be different.
*note* in 13.04 this is moved to ~/.local/share/nautilus/scripts/ but in previous Ubuntu releases it was in ~/.gnome2/nautilus-scripts
This had me pulling my hair out and looking for a nice new tool and am currently trying THIS OUT (the old way still works though)
Also get the most up to date Java, from a terminal type
Code:
sudo add-apt-repository ppa:webupd8team/java
sudo apt-get update
sudo apt-get install oracle-java7-installer
sudo update-java-alternatives -s java-7-oracle
Click to expand...
Click to collapse
Click to expand...
Click to collapse
*If doing lots of android development you may want to look into an older java version... but thats another story, see a guide on developing if thats your bag
So now you understand the basics, you have all the tools you need, got may sample.zip and are ready to learn how to.
The next post be available commands to use in your updater-script
*See post #12 to understand a common problem people (sometime even myself) make with the sample.zip below
Let's Start!
Now We Have Our Tools And A Basic Understanding
But we need to know how to have our update.zip do what we would like!
We need to see the various functions available to us, this I copied from the XDA wiki as it is precise and simple, (Normally I wouldn't copy and paste but this is what you need exactly) I will next give examples:
Need To Know!
Syntax
The script file must use UNIX newlines as EOL.
Whitespace (space, tab, LF 0x0a, but not CR 0x0d) may be freely used.
Comments are any line prefaced with #
All commands are terminated with a semicolon. Clauses (in ifelse) may contain any number of commands, each terminated with a semicolon.
Strings are usually delimited with double quotation marks.
Numbers are really just strings and are usually not delimited.
Logical values are "t" for true or "" for false.
The comparison operators are == (string equal), != (string not equal).
The logical operators are || (logical or), && (logical and), ! (logical not).
The concatenation operator is +. (Caution: 2+2==22)
The conditional keywords if, then, else and endif operate as expected. The ifelse macro may be used instead.
Disk operations
format(type, device)
mount(type, device, mountpoint)
unmount(mountpoint)
is_mounted(mountpoint)
Image operations
write_raw_image
write_firmware_image
File operations
package_extract_file(source, destination)
package_extract_dir(source, destination)
delete(file) – deletes a file
delete_recursive(directory) – completely deletes a directory
symlink(target, link0, ...) – create any number of links to a target
set_perm(user, group, mode, file) – performs a chown, chmod on a file
set_perm_recursive(user, group, mode, directory) – performs a chown, chmod on all contents of a directory
getprop(key) – returns a string value of the associated key from the system properties
file_getprop(file, key) – returns a string value of the associated key from a specific file
Patching operations
apply_patch
apply_patch_check
apply_patch_space
run_program(program, arg0, ...)
Control
assert(condition0, ...) – aborts and prints on any false condition
abort(message)
ifelse(condition, trueclause, falseclause) – conditional, falseclause is optional
Predicates
is_substring(substring, string) – checks to see if string constains substring anywhere
less_than_int(x, y) – checks to see if x<y when considered as integers
greater_than_int(x, y) – checks to see if x>y when considered as integers
User feedback
show_progress(fraction, seconds) – advance progress bar a fractional amount over a period of seconds
set_progress(fraction) – advance progress bar a fractional amount
ui_print(message0, ...) – print any number of strings
sleep(seconds) – pause a number of seconds
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Having a list of the available commands is great but we need to understand what they do, consider the above a reference point and below and understanding of the commands
How To begin the Process
First find out what you want to do, get your apps, images, what ever you are trying to do in order and then open your text editor (Windows notepad ++ and Linux gedit)
Then make sure the file structure in your folders are correct and have the update-binary specific to your device and be ready to write your updater-script
I will go deeper into the setup in a moment but for now we need to understand how to write the updater-script
Basic Usage
Often you will start this script with a ui_print(" "); to explain the purpose of the package you made. There are many ways to go about this but a simple start maybe:
Code:
ui_print("Modded Google Play App By demkantor");
This can be as complex or simple as you want and include as many lines as you would like. We just want to tell the user what is happening to their phone.
We also want to have the progress show, this will help the user know when everything will finish, especially bigger packages that can take some time, don't want people to think its stuck!
There are a couple ways to do this, I tend to use a series of set_progress(0.1); starting in the beginning and working to set_progress(1.0); when complete. you may also use time as in show_progress(fraction, seconds) choice is yours:
Code:
set_progress(0.1)
# Something going on
set_progress(0.5)
# Some more stuff is happening
set_progress(1)
# Indicates completed task
Now you may have notice I used # symbols in front of some lines, these are used to comment lines that aren't part of your script and for you and only you by and large.
Any line that begins with # will not be read by the script, here is a short example of usage:
Code:
set_progress(0.1)
ui_print("Modded Google App By demkantor");
ui_print(" ");
# Need to mount system
ui_print("mounting system partition");
set_progress(0.3)
mount("ext4", "EMMC", "/dev/block/mmcblk0p25", "/system");
# Flash modded google app
ui_print("Flashing App!");
set_progress(0.5)
package_extract_dir("system/app/com.modded.app", "/system/app");
# Don't Forget to set Permissions
ui_print("Setting Permissions");
set_progress(0.7)
set_perm(0, 0, 0644, "/system/app/ModdedGoogleApp.apk");
# Unmount system before we finish
ui_print("Unmounting System");
unmount("/system");
ui_print("You're Finished! Thanks For Using My App!");
set_progress(1)
Explaining the Above
This would be a very basic setup, and the comments, extra uiprints, and set progress are not really necessary in such a basic flash, but it will be good practice to use all this as you progress
I need to explain a few things in that script quickly:
You notices i commented out a line (# Need to mount system) and underneath a line read <mount("ext4", "EMMC", "/dev/block/mmcblk0p25", "/system");>
This will change from device to device but you need to mount your system or data or whatever to flash to it.
The first bit "ext4" is the type of file system, there are many options here but use what your phone is partitioned to.
Some common file systems: rfs yaffs2 ext2 ext3 ext4 vfat
Next is the partition type: "EMMC" or "MTD" for the most part
Next is the location of the file system; This is key as you don't want to flash an app to your EFS partition or whatever. "/dev/block/mmcblk0p25" is the system partition location for the device in this example, to find yours do this:
Open a terminal emulator on your devices and type: mount
Or
Open an adb shell and type : mount
these are just two quick and simple ways but there are many others
Last is the mount point, or name of this partition, the example above was "/system"); The more common partitions you will mount will be system and data but you can of course do others, just make sure everything matches.
You also noticed this line: # Flash modded google app , and the comment is just telling you what command you want to do next, in this case:
package_extract_dir("system/app/com.modded.app", "/system/app");
This is taking everything in the folder /com.modded.app from within the update.zip and installing it in /system/app on the device.
**Note understand if an app installed is best as a system app or userdata app**
package_extract_dir("data/app/myspecialapp", "/data/app");
this may be a more common example.
You also saw the commented line: # Don't Forget to set Permissions
and permissions that were set: set_perm(0, 0, 0644, "/system/app/ModdedGoogleApp.apk");
This set rw- r-- r-- with no special permissions to ModdedGoogleApp.apk
This is important to do as not setting the proper permissions will to allow the app to function as you intend.
If you are familiar with Linux/Unix chmod commands (change mode) then this is all we are doing. Or if you ever user Root Explorer or any other root access file manager in Android you may be familiar
If not I suggest to read up on THIS as its important to know
And The last piece in there was unmount("/system"); which I'm sure wont need any explaining.
You also notice progress and ui prints helping the user along, These were not placed well or really all too needed in such a simple script,
but I wanted you to see an example and learn to use them along with comments for yourself as your scripts become more complex.
Lets do some of this more complex stuff now!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
The last chunk should have helped you understand some simple scripting, but really this is far from enough unless you are only ever planing to flash one app!
So lets dig deeper into Edify and see if we can create an ever better update.zip!
Erase Commands
Format, delete, and delete_recursive can be very helpful, I'm a huge supporter of wiping clean before flashing a new ROM and occasionally wiping cache and dalvik after.
It will be handy for you to add these functions in to lets say a ROM you made before a flash if you deem it necessary or wipe cache and dalvik after your mod.
No matter the reason you should understand how and when you should do this.
Code:
delete("/data/app/googlePlayMusic.apk");
delete("/system/app/Provision.apk","/system/app/QuickSearchBox.apk","/system/app/SetupWizard.apk");
The above is doing two things, first it is deleting a single app from data partition (googlePlayMusic.apk)
Next it is deleteing a series of apps from system partition (Provision.apk, QuickSearchBox.apk, and SetupWizard.apk)
The reasoning why you want to delete a single file or app is up to you to decide, but the above will do it easily. If you want to delete a full directory then:
Code:
delete_recursive("/system");
delete_recursive("/cache");
delete_recursive("/data");
So this is a series of three commands to delete everything in system, cache and data. You may also string them together into one command separating each with a comma.
Code:
ui_print("Formatting system");
format("ext4", "EMMC", "/dev/block/mmcblk0p25", 0);
The above will completely format and erase system, you could also do data, cache, boot, whatever. Just be careful as this will make all data unrecoverable.
You would need to unmount the partition before you run any format command
Code:
unmount("/system");
unmount("/data");
Know the partition to unmount, then know the partition to format (ie mmcbl0p25 is not always system!)
when you are ready to flash something to a partition go back and mount it (this I covered earlier)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
So now we have an idea on how to use some basic commands, lets put together a couple simple scripts and try to flash them!
Once you are confident with do this we will create our own more complicated flashable .zips
Lets try something simple
So most everyone who is bothering to read this enjoys flashing ROMs and probably does this a lot. But as we all know setting up a new ROM is time consuming!
One of the first update.zips I ever wrote was to flash about 20 apps I always used and each time I flashed a new ROM I would have to redownload them or use an app like Titanium Backup to reinstall them.
I found it just far easier to make a flashable .zip and keep in on SD card so after each wipe and ROM flash I could just flash this next and all would be there.
So lets do it together!
First
Make the file structure I showed before, or download my sample.zip from previous post. If its a new folder lets name it apps2install, If you have the .zip extract contents and name the main folder apps2install.
Second
Now we need some apps, lets take a couple free apps (never share paid apps in this forum! or anywhere really) For simplicity sake lets take three apps:
ADW Launcher, Dropbox, and Pandora... all are free on the market and for simplicity sake I suggest you take these same apps.
Download from market and bring the .apks to your computer, do this with either copying them with a file explorer and saving them to sd card, then transferring to computer or I prefer to use ADB. Your choice:
*Method 1... File Explorer
Open any file explorer after downloading apps, go to /data/app , and now copy the three .apks and transfer to sd card.
Now go back to /data/app-lib and copy com.dropbox.android-1 folder to SD card
Once you have the 3 .apks and one app-lib, connect phone to USB and transfer to computer. Then we need to put them in proper folders, again there are multiple ways but play along for learning purposes.
Your file structure should now look like the above, orange is folders, green .apks, and grey files
*Important, most apps store themselves to /data partition, some need to be in /system. Some apps are downloaded to /mnt/asec and not always do libs go into data/app-lib
My point is to know where your apps are to pull them and know if there are any needed libs to make them function properly. This is on an app by app and ROM by ROM basis
*Method 2... using adb
For me adb is faster and I like the command line so if your good with adb I say go this route, if not I suggest reading up on it and then using it or use previous method
So download the apps to your phone I mentioned above, now connect phone to PC and open terminal/cmd and type
Code:
adb pull /data/app /pulled
adb pull /data/app-lib /pulled
This will pull all apps store on /data/app and all app libs stored on /data/app-lib to your PC into a folder called pulled.
If you only want to pull the apps in question the add com.dropbox.android-1 after /app and /app-lib (or whatever the app / lib is titled you want to pull)
And if you want a differemt folder to be stored on pc change the /pulled to whatever you like, maybe C:\Users\youraccount\Desktop\pulled (for windows)
Or /home/youraccount/pulled (for Linux) your choice on all this
Third
Lets write the script, I'm using notepad++ in windows here (currently booted in windows so...), use gedit or what you prefer in Linux, just be sure to write in UNIX format.
Code:
ui_print("Flasing Your First update.zip.....");
set_progress(0.1);
# Mount System Partition
ui_print("Mounting System");
mount("/system");
# Mount Data Partition
ui_print("Mounting Data");
mount("/data");
set_progress(0.3);
ui_print("Flashing Apps!");
ui_print("....");
package_extract_dir("system/app", "/system/app");
set_perm(0, 0, 0644, "/system/app/org.adw.launcher-1.apk");
package_extract_dir("data", "/data");
set_perm(0, 0, 0644, "/data/app/com.dropbox.android-1.apk");
set_perm(0, 0, 0644, "/data/app/com.pandora.android-1.apk");
ui_print("....");
set_progress(0.6);
# Set Permissions
ui_print("Setting Permissions");
set_perm_recursive(0, 0, 0755, 0644, "/system/app");
set_perm_recursive(1000, 1000, 0771, 0644, "/data/app");
set_progress(0.8);
# Unmount System & Data
ui_print("Unmounting System");
unmount("/system");
ui_print("Unmounting Data");
unmount("/data");
ui_print("****Hope You Learned Something New Today!****");
set_progress(1);
This Is an example of your updater-script, it should look similar but it does not have to be the same. Let me explain further:
The first few lines in this script we have gone over, the ui_prints and the mounts, do what you want with ui_prints and use mounts for your devices
#comments - we talked about these too, these will not be read by the script, rather for your purpose.
You also should be familiar with the set_progress, use at your will, not needed
Now you see package_extract_dir("system/app", "/system/app"); this, like before is dumping everything from system/app in your update.zip to /system/app on device
Now the permissions again, set_perm is for a single file, in this case rw- r-- r--to adw launcher, which was just flashed as a system app.
Then there is package_extract_dir("data", "/data");
This is taking everything from the data folder in your update.zip and transferring it to /data on your device.
Remember we had 2 apps and 1 lib in data, but with this one command we put all on device in proper places. We could have separated the commands, but why bother!
Speaking of why bother you may have noticed that after each transfer from update.zip to device there were permissions set at the end.
Then toward the end of this script more permissions? Why? Well, to learn!
The first command <set_perm> is for a single file and the last commands <set_perm_recursive> were for an entire directory.
So you can set up each individual app or whatever with permissions, or just change a full directory. Each case is different and you will need to asses what is best in your situation.
But yes, there was no need to do it twice here
The last bit in this script is unmounting partitions and some ui_prints and set_progress, these we have covered.
And being this the end, lets move on to our next steps! (save your work!)
Forth
Now we should look over our script for errors, check for proper encoding, and make sure everything is saved to proper directory.
Once all is correct we need to zip it, I prefer 7zip but do as you please.
In windows, highlight the 3 folders (system,data,META-INF) > right click > 7zip > add to archive
Now make sure you set compression level to store, pretty much make sure it looks like pic bellow
Now that this is done, you will see your new zip (apps2install.zip) Great but it is still best to now sign this zip, but not needed depending on your recovery setup.
**Note will soon add photos for Linux (just need to reboot!)
Fifth
Signing the zip, again there are multiple ways, I will show two signing methods, one in Windows and one in Linux. Choose one of these or another method, use what works for you!
**Windows**
I am choosing to use SignApk to sign apps in windows, the link is above and why not, HERE IT IS AGAIN
Unzip it, put the contents where you want (directly on (C or creating a path in environmental variables is nice but unneeded)
Put the apps2install.zip in this folder then open CMD in the same location as contents and type:
Code:
java -jar signapk.jar certificate.pem key.pk8 apps2install.zip apps2install-signed.zip
And now you will see two copies (of course the one titled apps2install-signed.zip is the one to flash)
As a side note you can change apps2install-signed.zip to what you want, no need for the -signed but at first it is nice to know which is which
**Linux**
So on both my Linux boxes I use @Amon_RA's right click to sign script, but have recently been trying out another by @lithid-cm which is quite nice.
See the second post for a quick guide on how to set up and know that nautilus-scripts have moved in Ubuntu 13.04!
So simply right click on the .zip, navigate to scripts, choose sign, profit
Click to expand...
Click to collapse
Click to expand...
Click to collapse
All right! Now transfer your newly made update.zip to your recovery and give it a flash! When complete see if your new apps appear and if they work!
If all is good try your to make your own, if you get errors, post here and I'll try to help!
Happy Flashing!
And another.....
How To Make An Aroma Installer Package
Now it seems like every ROM or mod is flashed with aroma rather than a simple .zip, and for good reason.
Aroma is a handy tool to allow users to flash what they want, be it a ROM, kernel, Mod, whatever, it just makes things simple. Not to mention a customizable UI.
In truth this is very easy to set up and only requires a few more steps than making you standard flashable .zip, it will be only as complicated as you make it.
The best advice I have for anyone wanting to use Aroma is to download the demo from HERE and see how it works.
Then download a few other Aroma Packages to see how the file structure differs, and how the updater-script and aroma-config are used.
Here are a couple I have made for different devices, feel free to download and look them over.
An Aroma Package for any ROM for the Samsung Sidekick 4G This one flashes no ROM just basic apps and mods
Splash Screen and Bootanimation Aroma for the HTC VISION This only flashes new splash screens and Bootanimations
An Aroma Package for the HTC Vision for a specific ROM This one is ROM specific as it contains mods for only one ROM
A ROM Using Aroma To Install Various Features This one is a ROM specific to the HTC Vision that uses Aroma to customize the install
As you can see there are many ways to use Aroma to your benefit, and its up to you how to use it. I will be keeping this short but will try to help you understand the basics.
As Always i encourage questions whenever you have them! Another Great Place To Ask Questions
File Structure
So once you download any Aroma package (be it from a ROM or the demo) you should see something similar to this:
Create any folder you need in the same level as META-INF, such as system, data, or whatever you want really. You just will need to organize it in a way to tell the updater-script where to look.
To Start
Take an update-binary from your device and rename it to update-binary-installer, replace this in the one in the aroma demo.
Now the two main files we will cover here are the aroma-config and updater-script.
Think of aroma-config as the script for how you want aroma to look and what options to flash.
Then think of the updater-script as what actually does the installation after user choose what he/she wants. This is written in the same syntax as covered before but a few extras are added.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
aroma-config
Lets begin with editing the aroma-config (if using windows we need to use notepad++, in Linux use your favorite editor)
We will create something simple, an Aroma package to flash a choice between four kernels, four launchers, and four apps. (of course we could do a lot more but this will do for a start)
Lets Begin!
Open a new file in notepad++ or your Linux text editor and name it aroma-config. Or feel free to take the one in the demo package, but we are going to start fresh so make sure you are on a blank page.
The beginning should look like this
Code:
# Demo Aroma Script, Make changes accordingly.
# ---------------------------------------------
ini_set("rom_name", "MyFirstAromaInstaller");
ini_set("rom_version", "1.0");
ini_set("rom_author", "demkantor");
ini_set("rom_device", "MyDevice");
ini_set("rom_date", "CurrentDate");
Of Course name it as you please, change the version as necessary, best to use your name over mine, use your device and add the date.
These are all variables that can be set throughout the install process and by adding this in the script you can just change date, build, etc at the top of the script rather than searching... some of my scripts are well over 1000 lines and this is a nice feature.
Ok, next lets add a blank line to separate (hit enter) and start line 9 like so
Code:
# Splash screen "3000" = "3" secs , "cyan_splash"=filename of splash png
# --------------------------------------------------------------------
splash(4000, "cyan_splash");
This will be the splash screen when aroma first starts up, I am directing it to a .png image named cyan_splash.png and have it set for 4 seconds (change accordingly)
this image is to be place in the aroma folder, in the demo there is one named sample_splash - feel free to edit this at your will
The next two chunks in the script will be for the font and theme, we aren't going to get fancy here so adding this to the script will suffice
Code:
# Font size declaration. "0" = Small Font. "1" = Big Font.
# --------------------------------------------------------
fontresload( "0", "ttf/Roboto-Regular.ttf", "12" );
fontresload( "1", "ttf/Roboto-Regular.ttf", "18" );
# Theme used for aroma interface
# ------------------------------
theme("ics");
This is to use the already made Robot font, and we have both the large and small set, then a space and we are using the premade ics theme.
If you want to change any of this feel free to use whats already in the aroma demo (look in the folders) or create your own. But for now lets move on
The first page of your aroma package should be a welcome/explanatory page. It should inform your users what the will be flashing, what device it is meant for and anything else you may want to convey.
Here is a sample and just change accordingly:
Code:
# First page info
# ---------------
viewbox("Welcome!","You are about to install <b>XXX.AromaPackage</b> for your <b>Name Of DEvice</b>, built by <b>demkantor</b>.\n\n"+
"Proceed with the installation only if you're <b>Ready to be wowed by my amazingness!</b>\n\n"+
"You May Leave Aroma Installation At Any Time Using The <b>Menu Button</b>.\n\n"+
" Version: \t<b><#selectbg_g>"+ini_get("rom_version")+"</#></b>\n"+
" Built: \t\t<b><#selectbg_g>"+ini_get("rom_date")+"</#></b>\n"+
"\n\n"+
"Press Next to Continue the Installation",
"@welcome"
);
A couple things to note here, <b> </b> boldens the chosen text, the \n\n"+ ends the line, the @welcome tells aroma what the screen should be setup like, the viewbox( begins the code and the ); ends the code for this section.
I will go over viewbox, checkbox, and selectbox in more depth later.
Remember the ini_set variables from the beginning, this will automatically add the proper date and version to the welcome screen... nice!
And now lets add
Code:
setvar("installer_title",
"You are about to install <b>MyAromaPackage</b> "+
"with the following choices:");
Rename as you see fit, oh and this next piece is optional but i throw it in many of my packages, here is a good time for:
Code:
# ---------------
# Generic Warning
# ---------------
alert(
"Warning!",
"Please Make Sure You Know What You Are Doing And Can Recover Your Device, What You Do To Your Phone Is Your Own Choice!",
"@alert"
);
This is a small alertbox that flashes on the users screen, you can have it say whatever you'd like and change the style, font, colors, etc. You can also add a yes/no button or view changelog, etc etc, but we're keeping this simple
On to the real codding!
Code:
# -------------------------------
# Kernel choices using selectbox.
# -------------------------------
selectbox(
"Kernel Choices",
"Choose the Kernel to install to your device",
"@personalize",
"kernel_choices.prop",
#------------------------------------[ selectbox With Groups ]---------------------------------#
# TITLE | SUBTITLE | Initial Value #
#------------------+-----------------------------------------------------------+---------------#
"Kernel Choices", "", 2, #-- Group 1. key = "selected.1"
"Kernel Choice 1", "A Kernel as boot.img", 0, #-- selected.1 = 1
"Kernel Choice 2", "A Kernel as zImage", 0, #-- selected.1 = 2
"Leave Kernel as is", "Not Touching Kernel", 1 #-- selected.1 = 3
);
appendvar("installer_title", "\n\n<b>Kernel Choices</b>");
appendvar("installer_title", iif(prop("kernel_choices.prop", "selected.1")=="1", "- Flash Kernel 1 ", ""));
appendvar("installer_title", iif(prop("kernel_choices.prop", "selected.1")=="2", "- Flash Kernel 2 ", ""));
appendvar("installer_title", iif(prop("kernel_choices.prop", "selected.1")=="3", "- Skip Kernel Installation ", ""));
Ok, lets explain this chunk. The first three lines you see are commented out, this is just for anyone looking at the code to know what is happening.
the next line gives us the aroma ui option of select box, this allows user to select one and only one option (as you may have guesses you don't want to flash two kernels)
It starts from selectbox( and ends the ui at );
The next line will be the header on the ui "Kernel Choices", after this an explanation in the ui "Choose the Kernel to install to your device",
and the following "@personalize", is the style aroma will use, for the most part "@personalize", will be used at all user install screens within aroma
And next we have "kernel_choices.prop", which the updater script uses to know what option the user want to flash from the category Kernel Choices
Now we have some more commented lines, again this is just for reference to make life easier
And know you see 4 more lines, the first is giving the header for the category, and the next three are the two kernel options and the third is to not flash a kernel.
"Kernel Choices", is your header "", is an empty subtitle that could be filled for added info to the user the 2, explains to aroma its the header
The #-- Group 1. key = "selected.1" is telling aroma this is the first group and to write the choice to kernel_choices.prop as selected.1
If we wanted to we could have multiple groups within this category but were keeping this small.
The two kernel choices have subtitles saying as a boot.img or zImage, I'm just giving two common options on how the kernel will be installed in the updater-script
And the three choice in this ui has #-- selected.1 = 1 or 2 or 3, these will be what is written to the kernel_choices.prop to allow the updater-script to chose the right option
As you can see the final option has a 1 instead of a 0 after it, this makes it the default selected and although not needed "do nothing options" I feel should be defaulted to
And the last two important thing that many new scripters miss are the absence of , after the 1 this is to let aroma know there are no more options and the next line will be the end of this section, signaled by );
I cant think of an easy explanation for appendvar if your unfamiliar with coding, but it is adding a string to a variable.
This is for the updater-script and will be come more clear when we get to this part. So for now copy and paste...
Click to expand...
Click to collapse
Click to expand...
Click to collapse
demkantor said:
Introduction
Hello Again! I have decided to make a series of tutorials for the XDA-University posted into this forum.
These guides will be geared toward the novice but will involve tips and instructions I hope seasoned users will find helpful as well.
Current list of guides
Fastboot Installation and Usage
All of my guides are to be considered a work in progress, only because I never consider any guide complete and will continue to update and answer questions for a long time to come.
What To Expect From This Guide
The basics on how to create a .zip to be flashed in recovery
*This will include a series of commands executed in the updater-script
And of course this means you will learn at least some basics of Edify, the basic script you will write these commands in.
I also will be adding a short section on Aroma Installer but am willing to answer questions on it use as well.
This Guide will be for Linux and Windows (Sorry Apple fanboys, not trying to be a jerk but I got to stick to my principles)
**As always I encourage questions as I am not always clear and I can easily overlook something.
Click to expand...
Click to collapse
I consider myself a complete noob I just know how to root and install roms kernals etc. I want to learn how to create roms so will be waiting for your guides ...
Well I'm glad to know I'm wanted
Learning to make your own modifications, kernel, ROMs, whathaveyou can get to be tricky. I would really recommend to start real small
start with some easy stuff like take a ROM you like in a .zip, extract it, and dig through each folder so you see what types of things are in there.
Grab an app and do the same thing, don't bother to decomplie it just use 7zip or something to extract its contents and just peer.
Learn some coding, code.org and code academy is great for simple stuff, I just love Marakana TechTV (a Youtube channel)
When you get your head around the simple things, try a small task, don't try to
here is some sage advice from one of the top dev's ever Read
I'm not saying this to stop or slow you down, just want to say be ready to do a lot (seriously a lot) of reading and research and be ready to fail a few times for sure. I am more to teach you what i know but I cant say I'm an expert in android coding, but as always, ask questions and ill do my best to answer!
Re: basic update.zip
demkantor said:
set_progress(0.1)
# Something going on
set_progress(0.5)
# Some more stuff is happening
set_progress(0.1)
# Indicates completed task
Click to expand...
Click to collapse
Thank you for delving into the basics of Edify- would you clarify here on the set_progress command? In both examples your final set_progress contains a value of (0.1) - should we be setting this to (1.0) as you mentioned above? Thanks again, great writeup!
Ahh and only if I could write an edify script to edit my guide! Thanks for catching that and yes it should read 1.0, ill change as soon as I can get back to it.
I'm getting married in a few weeks so although I'm on spring brake from college I still need to find the time to finish these guides, usually late at night! But expect a much more comprehensive write up as well as edit guide!
Sent from my RubiX NonSense using xda app-developers app
Great tutorial. Thanks. :good:
Thanks
Great clear & concise guide on How to create Recovery Flashable .zips.
I am definitely going to give this a go.
I always need to push several apks to /data/apps after flashing a new ROM and have been using TiBu for this.
But, will give me immense satisfaction if I could write my own script and create a flashable zip for these apks.
Thanks once again! :laugh:
PS: All the best for your wedding! :good:
oops!
So I had a little more time to add to this guide, still lots more to cover! and i plan to overhaul and edit it to a more readable/searchable format once its more complete
(never complete in my mind - but still...)
I did notice that the sample.zip in the second post is flawed, come on 30 some downloads and no one caught it?
My bad though, when I zipped it I did it wrong as you can see there is an extra folder that should not be there, if you're not sure what I mean by this, see the third post for sample2.zip
Pretty much I just zipped the sample folder rather than its contents inside.
I will leave the original there so people can see the mistake (so you dont do it to!)
as always,
Happy Flashing!
Hi,
I've got a kind of related question and this actually seems like an ideal place to ask it.
Recently I took an existing boot animation from an older phone so that I could have it on my HTC One. As the resolution of my phone is bigger, I took apart the boot animation and resized all the images and edited the desc.txt file to make it compatible. I replaced the default boot animation with the new resized one and it worker great.
I then decided it would be easier to make it flashable so that other members wouldn't need to mess around with moving the file to a certain place for it to work. This is where the problem starts.
I don't have access to a computer so I tried used jrummy's app ZIPme to make the animation flashable. It said it had installed but in fact it hadn't.
So how could I successfully turn it into a flashable zip direct from my phone?
Also a secondary question.
With the One (not sure if other phones are the same) you need to specify the path to which the boot animation will be saved to. As different ROMs have the boot animation located in different places, I asked a few people how I could make it flash across all ROMs. I got told that I'd need to specify it in the updater script.
So, would I simply be able to copy the updater script from another boot animation for this phone or will that not work?
Apologies for the longer than expected post. It's just that this side of Android is new to me
SGS2 FAQ | HTC One FAQ
@KidCarter93
Hey I saw you asking in the other thread and was going to chime in but others beat me to it and you stopped posting so i assumed it was all figured out.
correct, the updater script will put the boot animation were you tell it, its up to you to know where the phone keeps it.
an option may be to send it to multiple locations within the script provided the other installs wont harm anything, i guess i would have to know each location you are thinking of to answer this fully.
a common place (at least across the androids i use) would be /system/media so the script would look like
package_extract_dir("system/media/com.android.bootanimation-googlegears", "/system/media");
set_perm(0, 0, 0644, "/system/media/bootanimation.zip");
Click to expand...
Click to collapse
or whatever you have it called and what folder you have it in.
If you would like me to look at the script you are writing I'd be glad to, This guide is taking me forever to write as i have too many projects and too little time, but bootanimations will be covered as some update.zip options.
feel free to pm me If you need a hand further than whats above, ill be around for a while yet tonight!
Edit
somehow I missed the part where you asked if you could do it with your phone, and I'm sure there is an for it somewhere, just never tried... Actually I saw a post on g+ not long ago about someone looking for testers for one, I'll see if I can dig up the link for you, otherwise send me the file and tell me where its located etc and I'll make one for you, only takes a min or two
edit 2
NEVER TRIED THIS but who knows, it may be what youre looking for
im about to hit the shower quick, but ill be around for another hour or so before i need to sleep, if you want me to make the zip for you just let me know
demkantor said:
Edit
somehow I missed the part where you asked if you could do it with your phone, and I'm sure there is an for it somewhere, just never tried... Actually I saw a post on g+ not long ago about someone looking for testers for one, I'll see if I can dig up the link for you, otherwise send me the file and tell me where its located etc and I'll make one for you, only takes a min or two
edit 2
NEVER TRIED THIS but who knows, it may be what youre looking for
im about to hit the shower quick, but ill be around for another hour or so before i need to sleep, if you want me to make the zip for you just let me know
Click to expand...
Click to collapse
Well most of the ROMs store it in system/media but the stock based ROMs I've tried store it in system/customize/resource. As far as I'm aware there aren't any other locations though.
That g+ post you linked to is the one that I mentioned, ZIPme. It works for other files but didn't seem to work for this for some reason. I might have to contact him and see if I went wrong anywhere.
Yeah it would be great if you could do it for me. Here's the zip - http://d-h.st/xo6
SGS2 FAQ | HTC One FAQ
haha, like it, will make one for me too!
do you have system mount points for me and an update-binary for your phone?
eh, ill see if i can dig them up...
edit
damn...just a bit to big to post on xda... link coming
edit 2
@KidCarter93 - hope you like it!
XDA-Bootanimation-signed.zip - 18.99 MB
of course i don't have this phone so i would recommend testing it before you publish it, but it should work with any ROM for your phone... let me know
I'm currently getting the following in recovery:
Installing XDA Bootanimation. . .
set_perm: some changes failed
E : Error in /sdcard/0/download/XDA-Bootanimation-signed.zip
(Status 7)
Installation aborted.
SGS2 FAQ | HTC One FAQ
Is system/customize/resource a folder on your phone? If so can you give me what permissions it uses? I'm guessing the chmod is wrong for that section.
If you are using a ROM that has bootanimation in /system/media then extract the zip and go to the updater script and comment out the two lines about /system/customize/resources
Then rezip and sign and see if it will flash
Sent from my Nexus 7 using xda premium
Edit: @KidCarter93
were you able to get it to work? if not i have some ideas that may help
Apologies for the slow reply. As it was stored in system/media, I done the changes you said and it installed fully through recovery yet it hasn't actually installed the bootanimation. It's still showing the ROMs bootanimation when I boot up.
No worries,
Ill check when I get home but I believed I used the tmobile htc one update binary and I see you are posting in the htc one thread (no carrier) not sure how these phones differ if at all, but ill check on this for ya.
But if you could do me a favor until then, see if there is anything in build prop that will always be there on a stock rom vs something different on a another based rom, I'm thinking to have it flash where you need we can have the update script check build prop and use if then ifelse then to choose the proper place to flash, this of course is if there is something there.
Again not having this phone makes it difficult but still should be an easy fix
Sent from my myTouch_4G_Slide using xda premium
Edit: @KidCarter93
I got a feeling this should work on any ROM for your phone, going the simple route...
XDA-Bootanimation-signed.zip - 44.61 MB
Let me know