Related
Guys, i have a Diamond, but, yesterday the diamond turn off, and don´t turn on, i tried to do a soft and hard reset and nothing, i tried to enter in bootmode and nothing, when i put the battery the screen turn on, and the diamond vibre, but nothing else, what i can do??
rmorera84 said:
Guys, i have a Diamond, but, yesterday the diamond turn off, and don´t turn on, i tried to do a soft and hard reset and nothing, i tried to enter in bootmode and nothing, when i put the battery the screen turn on, and the diamond vibre, but nothing else, what i can do??
Click to expand...
Click to collapse
what did you do *before* your diamond stopped turning on?? unless you had a completely unpredicted system meltdown of your diamond for injecting it with super high voltage. it is rare for it to not power off unless you did something ... so please elaborate so we can assist better.
Ok, yesterday i use the phone like anothe normal day, in the night i turn off the phone, and in the morning, when i tried to turn on, i have this problem, for example, when a tried to do a soft, hard reset, the screen is in black, when a conect the phone to the usb the screen is black, is, i left the phone alone, in 3 minutes the black screen again, i don´t know why.
any LED activity when plugged into USB?
I think it is a major manufacture problem
I had the same problem, taking out the battery waiting a while and inserting it back, will solve the problem for some time but it will happen again.
Finally I sent it to the HTC support center.
I don't understand why HTC didn't recall.
If you'll search this forum you'll see the same problem in different stages, some times it's a blank screen but the phone will ring and some are just freeze.
Hi, I've had my Diamond for about a month soon and it started earlier this week by not wanting to come on at all. Been taking out the battery for a few days but eventually got fed up and did a hardware reset tonight. Not long after that it just suddenly turned itself off and I couldn't get it back on again. I thought I'd pack it back into the box it came in and send it back tomorrow and took out the sim card. After that it came to life again.
Happened to get a call after that and that call was suddenly disconnected without any reason.
So I am not very happy with this phone at the moment. Would appreciate any advice or if you know for sure it can't be sorted maybe I should send it back and ask for another one?
Blazeitup123 said:
any LED activity when plugged into USB?
Click to expand...
Click to collapse
Nothing, but one time the pc detect the phone, but later nothing.
No Led activity either on mine when it went dead.
When the Phone goes dead, try cooling the phone down as much as possible, and try starting it up again.....
There is a problem with the HTC Diamond in that it can cook itself (excessive heat), due to the auto over temp function crashing and not switching off the phone..... (That's what I have been told at least...)
I know over around 5 Diamonds so far that have had this issue, where the symptoms slowly get worse...
Have a look at this thread....
http://forum.xda-developers.com/showthread.php?p=2905775#post2905775
PLEASE P.M. me if you have any of the symptoms described in the thread...
I have been TRYING to get my Diamond fixed under warranty now for 2 months with little success... And I kinda need to know how wide spread this problem is to proceed any further.
could not turn on after blank screen ...
Hello,
I've had the same issue as rmorera, and after I hard reseted the phone all went o.k.. BUT after I reinstalled part of the small apps I use, the phone started to go off again. So, the problem seems to be in the software ...
I believe the cause might be the SRS WOW which I use. I installed the .cab, then the .reg file provided (ufortunatelly I don't remember from which thread I got the files ...). And shortly after, the phone stopped working. I uninstalled the software, and now it works! Could it be that the SRS WoW did this?
I tried to reinstall the SRS WoW and I found that if enabled for "Internal (Stereo)" instead of "Headphones" it gets my phone shut when the WM blanks the screen. If I select the "Headphones" options the issue seems to disappear.
Still, the SRS WoW damages the volume buttons action, but I think this issue is on another thread ...
Started experiencing a strange issue with my tilt today..
When I soft reset it loads the Today screen, and then attempts to search for the contact 'wszx' (these keys are located next to each other). After this I can navigate the phone just fine using the touch screen, but the only buttons that work are the directional and center buttons located on the front of the phone, and the arrow keys on the keyboard. I cannot type at all using the keyboard, and pressing any of the other buttons does nothing (except the directional/center/Power). I also cannot Hard reset because the two soft-keys do absolutely nothing. I've hard reset in the past but it no longer works.
So am I SOL? I think I've tried everything.. and now I have a custom rom, etc on the phone and I have no way of getting it back to factory rom without the ability to hard reset.
Thanks for any help.
dam1en said:
Started experiencing a strange issue with my tilt today..
When I soft reset it loads the Today screen, and then attempts to search for the contact 'wszx' (these keys are located next to each other). After this I can navigate the phone just fine using the touch screen, but the only buttons that work are the directional and center buttons located on the front of the phone, and the arrow keys on the keyboard. I cannot type at all using the keyboard, and pressing any of the other buttons does nothing (except the directional/center/Power). I also cannot Hard reset because the two soft-keys do absolutely nothing. I've hard reset in the past but it no longer works.
So am I SOL? I think I've tried everything.. and now I have a custom rom, etc on the phone and I have no way of getting it back to factory rom without the ability to hard reset.
Thanks for any help.
Click to expand...
Click to collapse
Sounds like a hardware issue or simply a bad flash. Have you attempted to reflash the rom? Which rom are you using?
Well...
It wasn't working again this morning, but suddenly - out of nowhere - began to work properly. I'm stumped. If I ever figure out the exact issue I'll be sure to post back.
Thanks
Greetings,
I have same problem on my tytn...
Sometimes it suddenly starts working fine, but shortly it breaks again.
I have tried hard-reseting while it was working, but didnt help.
I think the problem appeared after charging my phone with a motorola v3 charger, so maybe it damaged my phone with over-voltage or something...
Anyway, if someone can suggest something i would be very grateful!
Hi I have exactly the same symptoms with my HTC Tytn II...when you power it on it starts typing letters (in my case CEDF). If the recording button is active it will start recording too. This happened suddenly and I haven't used any other charging apart from the usb and wall socket charger supplied with it.
All buttons (except front center key) and keyboard do not work. Any suggestions would be appreciated very much. This phone is only 8 months old.
Hi,
my Kaiser with dutty's WM6.1WWE ROM did the same this morning Yes I disabled the button 6 and stopped the voice recordings but all the hardware keys but few in the center of the keyboard are not responding. So I cant make or receive calls without taking the stylus out and touching the screen soft buttons andd that's pin in the ... while I am driving. I am using this ROM for almost a year now and I am extremely hapy (up to now) with its performance. When it all happened there were no activities on the phone - I woke up from a SMS notification (Yes I did receive an SMS from my bank) followed by repeting Voice Recordings. Any help will be highly appresiated! Thanks in advance!
keyboard problem
I am experiencing a similar problem with my stock tilt my keyboard does work however none of the text appears on the screen. I have tried hard reset and everything else I could think of, short of a clear storage reload. I would appreciate any help or suggestions from some of you more experienced users.
Bisonwill
anyone ever figure this problem out? im having the same thing happen now.
Same here
I've had it for a couple of weeks now.
I'm running WM6.1 from HTC (rom ver.3.29.422.1 from 2009-01-12) so nothing fancy here.
I even ordered and replaced the D-Pad and I replaced the keyboard (just the sticky part though). I totaly dismantled the phone and didn't find any issues with the cables.
Any ideas would be highly appreciated
Join the club!
This is crazy. My problem is exactly the same. I re-romed to the latest phoenix and it did not change a thing.
Help!
help....
any body here found a solution for the keypad/keyboard yet??? i have the same problem as you guys... any idea, thanks so much...
i have the same problem And there is something else. My Kaiser wakes up every 2 minutes - it's killing the battery. It works only for 6 hours now
Help
bump!!!
No more people with this issue or any solutions?
Pls! Help
ive joined the gang!
I decided to flash my cooked rom ive been working on.
i hadnt changed much in the kitchen and i think the flash has went badly.
it starts booting windows and where it should state "calibrate screen" it goes white and hangs there, buttons seem to respond by lighting up when pressed.
Now when i try to get it into bootloader or even hard reset it just doesnt work.
it just restarts the phone.
before this happened the backspace key hasnt been working for ages.
anybody got any ideas??
(lucky for me i have a backup kaiser!)
I'm having the same problem. Automatic wakeup, applications starting automatically, can't use keyboard, have to to use screen to use phone etc. I've hardreset using the clear storage method, reflashed a couple of times, but nothing helped. So here I am joining the club
If it's not a hardware issue, then try to flash another radio, many of the custom ROMs here doesn't include a radio, so if it's caused by a wrong radio, flash a new ROM without a radio doesn't help.
Check the Sticky for 'how to' if not aware.
PS: Check here for something need to know..
The question is.... how do I flash the device if I cant get it to go to boot loader and the OS wont boot properly !?
I think its an official Brick!
the really odd thing I've discovered is sometimes the OS leaves the loading screen on, and when it does if I press the FN and folder key, I get explorer up but its not responding... I haven't tried inserting a memory card yet to see if I can access that.
Danhargreaves said:
The question is.... how do I flash the device if I cant get it to go to boot loader and the OS wont boot properly !?
I think its an official Brick!
the really odd thing I've discovered is sometimes the OS leaves the loading screen on, and when it does if I press the FN and folder key, I get explorer up but its not responding... I haven't tried inserting a memory card yet to see if I can access that.
Click to expand...
Click to collapse
Try this:
1. Take out the battery from the phone.
2. Take out SIM card and SD card.
3. Press in and hold the CAMERA button.
4. Plugin to your computer using the USB cable, while keep holding press in the CAMERA button.
See does it enter the BOOTLOADER mode.
Once entered the BOOTLOADER mode, you can flash a new radio or rom right from there, in your regular way of running KaiserCustomRUU.exe.(Since you already have a HardSPL flashed on, otherwise a HardSPL is needed to flash first.)
Good luck.
Edit: If the power button and the camera button is still working, you can use the regular way of entering BOOTLOADER mode, and flash from bootloader mode or flash from SD card.
Originally posted by Manpreet @ www.sakajati.com
To enter in bootloader mode:
Simply Switch off your phone. Press and hold camera button and also press and hold the power button..You can remove ur finger from power button when phone is switched on but keep holding camera button until u come to bootloader …Now attach the usb to ur computer and do the flashing you normally do.
Click to expand...
Click to collapse
Thx for your suggestion:
I tried removing battery as sim and sd were already removed due to previous attempts in fixing!
so:
i removed battery (did not put back in), plugged in while holding camera
got nothing, so held power button at same time, the green light came on, then went off, and came back on again. but no bootloader.
i tried same procedure with battery in, and all i get is the OS loading up, no bootloader no matter how long i hold the buttons.
is there any other alternative method to get into bootloader (possibly involving other button presses)?
or any other ideas.
Really want to fix this as it was my "experimental" phone for cooking roms with.
Thanks again.
Suspect you have some hardware issue with the camera button. Can you ever take a photo with it?
Edit: Did you read through every post onthis thread:
MTTY (How to fix a bad ROM flash!)
If you tried that and still no luck, you can post your questions there. There are masters will keep an eye on that thread. And generally they only have time to look into their 'subscribed' threads, chances are they will not look into here.
Edit: Maybe the procedure I told is wrong, since I call from memory, check this:
dwny said:
If you have a bad flash....that's no reason to worry.
I haven't had to use MTTY to recover.
In most cases, if there's no issues with the Rom itself...you can pop out the battery and re-flash the same ROM from BootLoader Mode. This will also work if for some reason your computer crashes or loses power & restart during the FLASH.
If the Rom has issues.....the flash will not complete and the device will be stuck in BootLoader Mode. At this point,you must FLASH a FACTORY ROM!!
Pop the battery off 1st, power up the device, device will power up in BootLoader Mode, connect to pc & FLASH your devices FACTORY ROM. This will restore your device back to it's original out the box settings.
The above only works if the device has been put through the Hard SPL or SuperCID process.
I personally have never tried to flash a cooked ROM without unlocking any of my devices. From what I've read what others have experienced...the flash would just fail and they're stuck in BootLoader Mode.
Myself ... I've experienced bad flashes, bad cooked roms that I've cooked, lost power to a pc & had my pc crash during a flash. Listed above is how I've recovered. There is life after Bootloader Mode.
The only time you have to worry is if your device does not power up at all
As a public chef...it's your responsibility to set the parameters of your ROM! Meaning, Radio, HardSPL, program conflicts, etc.
You are not ultimately responsible if someone bricks their phone but if they pushed the issue, you could be hit with some form of liabilty because you failed on providing a simple Disclaimer that sets the expectation.
I hope I've been helpful.....
Click to expand...
Click to collapse
Edit again:
And try like:
Plug in USB first, and thenn press & hold Camera, Power button etc.
I remember once I read there is a way to enter bootloader without battery, just can not find the original again.
Hey everybody,
I was going out yesterday and I was in a bar when I tried turning on the screen of my Diamond, but nothing happened. I wasn't able to turn on the screen at all. So I pushed the soft-reset button, but again nothing seemed to happen. I didn't think too much of it, but this morning it still doesn't do antyhing. I managed to find out the following: it does seem to respond to volume keys being pressed; because I can hear the sounds and it will vibrate when I hold it down. The light thing seems dead, because it doesn't light up when I'm charging it. Also, I'm still able to set up ActiveSync connection and even flash different ROMS.
Any hints on what to do here? My device doesn't have ensurance or anything, and it was hard-SPL'd + SIM unlocked, so will guarantee cover this? (Device is not older than 6 months)
Kind regards,
ToxicWasted
Seems like a hardware problem, so you have to send it on guarantee but be sure to flash stock ROM and SPL back. If you need to use the screen of your phone try a program called My Mobiler.
Hi all, please can you help me with this!?
Firstly when my phone boots or is taken out of sleep mode it immediately activates voice record as if this button has been pressed. It then opens the dialler and types ‘EDFC’. If I open pocket word and then wake the phone up it also types ‘EDFC’ before doing the above.
My keyboard is not working and the only hardware buttons that function are the power button (only for a while), the camera button and the silver select button in the middle of the d-pad. The jog wheel and silver directional d-pad buttons occasionally come to life. The others don’t work (green call and red end buttons, ok, windows etc).
When I use the standard keyboard SIP on the screen the directional buttons and delete do not function?!
I’ve reverted to a stock ROM to make sure this isn’t the problem.
It appears as though my Kaiser thinks these buttons are being depressed, but I’ve checked them and they click normally and release when pressed (even though they don’t perform a function) so nothing is stuck down etc….
I’m going to use AE Buttons to try and unhinge the button functions for now, but it would be great if someone has any suggestions!!
Thanks in advance.
Update - AE Button won't unhinge the buttons or change their function to anything else (e.g. nothing). I can't stop this from happening every time the phone boots/wakes up!
Help!
Mine got the same symptoms last week except it opens quick something or other,and then the dialler dials 2547.The screen for my pin then comes up,which I can enter normally.Home screen fires up normally but the keyboard will not work or any buttons except the silver one in the middle.Searched a bit and this problem is very common although I cannot find a solution anywhere.Can someone please help
AE button didn't work?
When mine did that, I reset all the hardware buttons (not the keyboard, just the buttons reachable from the outside. A soft reset and viola!
That's the only solution I have. It's worked for me 2x.
Also try pulling the battery for 20 seconds or so and restarting. That has fixed my touchscreen not working after it gets spashed 3x. Yeah, my phone is old and abused, but keeps working.
Will
wasilvers said:
"I reset all the hardware buttons (not the keyboard, just the buttons reachable from the outside. A soft reset and viola!"
Click to expand...
Click to collapse
Thanks for your replies - I've got Orange sending me another one in the morning now and sods law it's just stopped happening.... Taking the replacement anyway in case it happens again.
For my knowledge, how did you reset the buttons? I deleted some registry keys to completely stop them working (although I couldn't find the registry keys for the red and green buttons).
Searching on Google there are quite a few reports of this, but no one has ever posted the cause!
I am having the same problem... please help. My phone is going crazy. I did a hard reset but still didnt solve the problem....
I am also having this issue. Phone starts typing EDFC and then initiates the voice recorder. I reflashed various ROMs and regardless of what was flashed.. initially they appeared okay, then it started happening again. I also tried hard and soft resets. Nothng has worked so far.
I resorted to disabling the keys and some of the applications which I dont use which appear to be getting started/run (Voice recorder for one). So far I havent had the issue, knock on wood.
I think this is more than likely a hardware error. My tilt is actually pretty old so I wouldnt be surprised. If someone finds either the cause or a workable solution please post. Im trying to hold off until January when my contact expires to get a new HTC.
I searched and searched but found no solution for this and ended up getting the phone replaced.
HTC seemed to know nothing of such a problem....
Have you tried whacking it?!!?
Hope you get it sorted.
brandall said:
Have you tried whacking it?!!?....
Click to expand...
Click to collapse
Hmm, yes, but I don't see how that helped my phone.
lol, all jokes aside, my friends, I ask in this thread as well,
what is causing this problem? I ran into this issue after ALL my buttons stopped working (except for the power).
I installed a new rom (I forget which one), and still nothing works except for power button.
It would be even better if someone knows the solution!
-Calling for Help-I'm still convinced it is a software/registry problem...
Okay, so there's no solution available for this weird problem of ours.
On the bright side, however, it is amazing that we can still use the phone, even after it requires servicing (some way or another). I have accepted this handicap that has been placed on my phone for now, simply hoping it will grow out of it one day.
But something isn't right. When I looked in the registry (trying to follow some directions I found within the wiki for when your keyboard STILL doesn't work properly), there was a discrepancy between what was supposed to be found in the registry and what was actually there. It wasn't that the values were wrong, it was the names of the values that were different. Why could this be?
Or even if you have moment of time, and you have an AT&T Tilt, and it works perfectly, maybe you could write up a run down of what you have hanging around in that section of the registry?
Hey, just so I can be sure, is there some place I can cross check what I have in my HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP with what is supposed to be there in a fully functioning AT&T Tilt?
Hello Everybody,
I've got a strange issue with my One: I purchased it to a friend 2 months ago, and from the beginning I saw that the capacitive buttons backlight was not working (it was ok for me, saw it with my friend before purchasing, and didn't want to send it in warranty for that).
I tested it also with HTCs test menu (*#*#3424#*#* in the phone interface) and they still didn't illuminate. But since last week-end, sometimes the buttons light up. When it's the case, their backlight works correctly, the brightness is automatically adjusted with ambient light level. But the buttons still don't light-up 90% of the time.
Does someone has an idea on what's going on?
Many thanks in advance for your help.
Best Regards
Ludobal
More information needed
Is it a stock Rom?
Unlocked Bootlaoder?
Custom Kernal?
Have you tried a factory data reset?
Hi, and sorry, I should have specified all of that before.
I'm on stock ROM, rooted, and TWRP installed.
I already did several factory resets (didn't have the choice, I had some crashes after installing updates or after restarting the phone), without any change.
Thanks a lot for your help.
Ludobal
ludobal said:
Hi, and sorry, I should have specified all of that before.
I'm on stock ROM, rooted, and TWRP installed.
I already did several factory resets (didn't have the choice, I had some crashes after installing updates or after restarting the phone), without any change.
Thanks a lot for your help.
Ludobal
Click to expand...
Click to collapse
I am having the same problem as you. In the dark, when the buttons are supposed to light up, they sometimes do and sometimes don't. I've done a reset with no change.
I'm wondering if I need to send my phone in for repair. It's a stock 64GB Developer Edition on 4.1, with the exception of S-OFF.
Hello,
It's not specially a good news, but I'm glad I'm not alone with this issue... I didn't want to send the phone to repair only for this backlighting issue, but now I saw it work, I really wonder if I can find a solution somewhere.
Regarding the problem itself, just a precision: when the backlight works, if I use the phone for a few minutes (2 or 3), the buttons lights systematically turns off. It comes back (or not) after a short standby period.
Ludobal
ludobal said:
Hello,
It's not specially a good news, but I'm glad I'm not alone with this issue... I didn't want to send the phone to repair only for this backlighting issue, but now I saw it work, I really wonder if I can find a solution somewhere.
Regarding the problem itself, just a precision: when the backlight works, if I use the phone for a few minutes (2 or 3), the buttons lights systematically turns off. It comes back (or not) after a short standby period.
Ludobal
Click to expand...
Click to collapse
When my lights work, they work properly, staying on when needed and turning off when they are supposed to.
Also, when you turn the phone on with the charging cable plugged in, the button lights blink as the phone is coming on. When the lights stop working, the button lights do not blink, so it could actually be a hardware issue.