Hey guys m using nexus one with cm6 on it......i am having difficulties in makin a call....when i dial a number, the screen stay the same and the call does not go through....even if i try to end the call,it wouldn't end....then after like 10 or 15 secs the call ends....after repeating the same steps then it becomes to normal....but it is really annoying....if someone calls me...he could hear the tone going.....but m nt recieving any call on my phone.....PLEASE HELP guys....What should i do????
On CM6 RC2 myself here, no such issues... did you do a wipe before flashing the ROM?
yup i did full wipe...cache wipe and dalvik cache wipe twice......but no solution.....sumtimes it runs like nothin happened and sumtimes i cannot even make a call....
From which version did you come? Did you root FRF91 with the WiFi trick, or a previous version & then updated to a pre-rooted FRF91? Also, what's your radio version? For CM6 you need the Froyo radio (4.06.00.12_7). An older radio might cause problems such as yours.
Related
Hello
I just installed Darky's 5.2 ROM over my stock 2.1-update1 and everything works fine, but whenever I receive a call something (dialer?) gets a force close and the call is rejected together with a temp. loss of signal.
Then everything is back to normal...
Any steps I'd take? I'm pretty new to this.
have the exact same problem... can dial out no problem but only receiving calls. so thinking about whether I should flash another rom until this is fixed.....
I was wondering could I just do a factory reset and then flash the rom over again? Do I have to disable the voodo lagfix before? Not too sure how this works heh.
I don't have this problem. But whenever i am in the game "flick kick football," I get some random hangs, and is forced to close. I suspect that happens when I get incoming calls. Anyway to confirm this?
Jule1k said:
Hello
I just installed Darky's 5.2 ROM over my stock 2.1-update1 and everything works fine, but whenever I receive a call something (dialer?) gets a force close and the call is rejected together with a temp. loss of signal.
Then everything is back to normal...
Any steps I'd take? I'm pretty new to this.
Click to expand...
Click to collapse
I have the same problem. I recived a call, something force closed, the signal dropped and i lost the operator. I had similar problems with bluetooth and file manager before on this ROM, but I re-flashed it and everything worked again.
no problem here with Darky's 5.2 ROM and the Clean Guide Instruction, i just received a call without any problems
I used the easy guide and did not clean anything or do a factory reset, I just followed it like a dumbo. I came from 2.1-update1 stock JM5 kernel with a ton of apps installed, if that helps.
hey I think I found a solution to this. I went to recovery mode, wiped cache, wiped dalvik, did a factory reset and voila, receiving calls works without force closing.
phew.. was about to download another rom. anyhow, hope that works for you Jule!
still a few problems with the ROM that i encountered:
- my AT&T home button is not working.... not to sure whether there will ever be a fix for it
- media volume, even set to max, is not working when playing movies and youtube.
Hi Folks,
yesterday I flashed my SGS (former stock 2.1) with Darkys Rom 9.3 beta1.
It seemed as everything is fine till today.
My wife tried to call me an I shortly saw her number, it vibrated shortly, the my SGS lost connect to the signal an the call was gone to the mailbox.
This happened all the time in 3G-Mode.
I tried it in GSM-Mode an an incoming call was not shown, it went directly to the mailbox without any signal at the phone.
My SGS doesn't even show who called, it's just all gone.
I don't know whats wrong.
I took a look in all the option they can be responsible for that an I didn't find anything that would say my phone to loose radio when a call comes in.
Maybe anyone has an idea and can help me.
Cheers,
Dirk
A Clue .
BETA = unfinished released for testing purposes so users can report back bugs .
jje
country1706 said:
Hi Folks,
yesterday I flashed my SGS (former stock 2.1) with Darkys Rom 9.3 beta1.
It seemed as everything is fine till today.
My wife tried to call me an I shortly saw her number, it vibrated shortly, the my SGS lost connect to the signal an the call was gone to the mailbox.
This happened all the time in 3G-Mode.
I tried it in GSM-Mode an an incoming call was not shown, it went directly to the mailbox without any signal at the phone.
My SGS doesn't even show who called, it's just all gone.
I don't know whats wrong.
I took a look in all the option they can be responsible for that an I didn't find anything that would say my phone to loose radio when a call comes in.
Maybe anyone has an idea and can help me.
Cheers,
Dirk
Click to expand...
Click to collapse
you should flash back to 2.2.1 first as 9.3 is not for 2.1 its froyo based not eclair use 3 button combo and use odin to restore stock then again use odin to flash CF-Root-XX_XEU_JPY-v1.3-BusyBox-1.17.1.tar which works with XWJS5 which is latest rom then go to market download rom manager install cwm with this and trie again with darkys good luck
Ok, tried to flash the 9.2 first and the 9.3 beta1 after it and it didn't work.
I had to make a factory-reset to make it work again.
Now I'm flashing the 9.3 again.
Just in case anyone else has the same problems, it only works with a factory-reset.
Thanks to everybody who tried to help
Cheers,
Dirk
limit sms
Darky, please, remove the limit of 3 sms!!!
darioid said:
Darky, please, remove the limit of 3 sms!!!
Click to expand...
Click to collapse
Have you read the headline?
You're a litte bit off topic.
Cheers,
Dirk
just install darky's rom 9.2 dont use 9.3 it's beta that means for testing,only.
It works now.
All I had to do is a factory-reset.
Thanks.
Dirk
Sent from my GT-I9000 using Tapatalk
Hi everybody!
I'm facing a big problem with GingerDX V19. For some reason, after a time of use (a day, a week...) I can't receive calls.
The phone rings and vibrate, but the screen is black. After some seconds, I receive a force close from com.android.phone. Then, the signal is lost (a small red 'x' appears on the status signal), and some seconds after I get signal again.
The persons who call me listen a one call sound, the the call drops. I can't see who is calling me, and the call log don't register anything!
It happens from nothing. The first time I install GingerDX, take 2 days. So, I upgraded again, but with LinuxDX kernel. Some days after, the problem appears again. About 5 days without problems, but yesterday the problem re-appear. So, I decided to unlock the bootloader, and try GDX with Alfs5 kernel.
I flashed yesterday, about 15pm. Today, about 13pm, the problem appears again!! I can't understand!!!
The only way to solve this is re-installing GDX with full wipe, but I have to re-install and re-configure ALL my programs. I read a lot of posts on GDX thread, but nothing solve my problem until now... "Force touch UI", disable "call me louder" or "looping ringtone", change the in-call screen... Nothing...
BTW, I CAN MAKE calls, send and receive SMS... But not RECEIVE calls!!
Any ideas?? I love that ROM, but I can't have life with this problem!!!
Thanks in advice!
try new [ROM] GingerDX | v021 | 05-12-2011 http://forum.xda-developers.com/showthread.php?t=1188486
hit thanks
I have upgraded to V21, but the problem persists...
This time, I'm using LinuxDX kernel instead Alfs5.
Any ideas??
full wipe~~
Already tried.
When I upgrade, I do a full-wipe, clean cache, format data / cache / system partitions, as well clear dalvik cache.
More suggestions?
Found one reason: the "Call Me Louder" option on Cyanogen Configs.
If I turn it on, problem happens. If it is off, I can answer calls.
I can't post on dev section for X8 yet, can anyone report this to Doixanh on GingerDX thread??
Tonight I'll verify if another setting will be problem.
Thanks!
If you want to full wipe, just make a backup of all your apps using titanium backup. Not sure if the feature exists in free version, but hey! You can give it a try
Sent from my X8 using XDA App
Hey all,
I just flashed Slim ICS 3.2 and the essentials files for the Vibrant and everything seems to be working great, however, I am unable to receive phone calls. I can place phone calls just fine, but I never even see when someone attempts to call me now. Any ideas on what could cause this and how to fix it? Thanks guys.
Phone call
flash another modem................I recommend u to flash kf1 modem after that flash KB3 modem.............
I am currently on Insertcoin 4.0.4 and cannot make calls. When I try to make a call, it would just say "call ended" immediately without ringing. I also cannot receive calls. I changed rom to PA CM11 Beta 4 and the same problem persists. No matter what I do, I can't make calls. I started to believe it was the radio, so I just flashed the T-Mobile US 4A.14.3250.15_10.34.1150.02L from the Radio dump list and still cannot make calls. I am S-off with the latest firmware and I noticed that this happened when all the roms in the forums changed from M7ul to M7lte. Is there a solution to this? I have tried wiping the data of the dialer and even installing a fresh rom with a full wipe. After a clean install, I would be able to make a few phonecalls before it starts doing the same thing again.
Thanks