I have had a VERY hard time trying to get into Download Mode until now. ive discovered a consistent method to get into download mode. w/o trying a million diff reboots while holding buttons
***First you must have ROOT***
all disclaimers apply to this method as well as anything modifying system firmware. If ur phone turns into an evil handicapped rabbit and breaks a window, its not my fault!!
Download Terminal Emulator from the Market
open terminal emulator
**you may need to change to default android keyboard for proper inputting
1.) type "su" and press enter
a dialog box will appear asking for root access and say yes (obviously)
2.) type "reboot recovery" and press enter
at that moment, ur phone should reboot into Download Mode to load Alternate firmwares for like Eugene's Vibrant4 ROM etc......
this it what it should look like...
#su
#reboot download
Problem Solved --------
To de-rail any flaming of ignorance. the 1st pic is Download mode and the second one is Recovery Mode to clearly show that they are NOT the same!! they have 2 diff purposes
...or you can download and install quick boot from the market which you then can make a shortcut to reboot into recovery with just one click
boimarc89 said:
I have had a VERY hard time trying to get into Download Mode until now. ive discovered a consistent method to get into download mode. w/o trying a million diff reboots while holding buttons
***First you must have ROOT***
all disclaimers apply to this method as well as anything modifying system firmware. If ur phone turns into an evil handicapped rabbit and breaks a window, its not my fault!!
Download Terminal Emulator from the Market
open terminal emulator
**you may need to change to default android keyboard for proper inputting
1.) type "su" and press enter
a dialog box will appear asking for root access and say yes (obviously)
2.) type "reboot recovery" and press enter
at that moment, ur phone should reboot into Download Mode to load Alternate firmwares for like Eugene's Vibrant4 ROM etc......
this it what it should look like...
#su
#reboot download
Problem Solved --------
Click to expand...
Click to collapse
Recovery Mode != Download Mode
you can type adb reboot recovery
or you can type adb reboot download
each will boot you into the respective mode. No other commands needed.
This won't work if you've flashed a firmware that didn't complete and are unable to boot up. If ppl don't learn how to manually get into dl mode, whenever they're unable to boot up and get to a terminal they're going to freak
I posted a post already on how to get into download mode in this section (hardware style)
ths method is used because the hardware method for getting to Download mode (vol dwn+power) isnt consistent for EVERYBODY..theres eveb a video for showin a way to get into download mode on youtube but it didnt work of me and he even said it isnt a consistent method but it worked for him. and also Recovery mode is NOT download mode!!!!!!!!!!!!. they are to diff modes!!. the only purpose for Download mode is for using the Odin flasher. i have to de-rail the dudes who tryna flame me and didnt read up on this b4hand. in the gen questions forum, there a bunch of complaints about the download mode not comin up. i swear that ppl dont read. if u wanna keep a secret from ppl, put it in a book or long paragraph on how to do somethin
just wanted to post (with the caveat that i do not have the courage to actually flash my phone) that if you have Root Manager (which i posted in the "delete your crapware" thread as a non PC/ ABD method) it has a reboot widget that has three options: 1. Reboot 2. Reboot into Recovery 3. Reboot to BootLoader.
dont quote me because i dont know for sure, but i assume Reboot into Recovery = Recovery Mode and Reboot to BootLoader = Download Mode. Just sayin...
boimarc89 said:
ths method is used because the hardware method for getting to Download mode (vol dwn+power) isnt consistent for EVERYBODY..theres eveb a video for showin a way to get into download mode on youtube but it didnt work of me and he even said it isnt a consistent method but it worked for him. and also Recovery mode is NOT download mode!!!!!!!!!!!!. they are to diff modes!!. the only purpose for Download mode is for using the Odin flasher. i have to de-rail the dudes who tryna flame me and didnt read up on this b4hand. in the gen questions forum, there a bunch of complaints about the download mode not comin up. i swear that ppl dont read. if u wanna keep a secret from ppl, put it in a book or long paragraph on how to do somethin
Click to expand...
Click to collapse
The reason it is inconsistent is because it is 'different'. It is an odd and unexpected way of getting into download mode. That doesn't make it wrong.
I've never been able to get into recovery using hardware. I'm hesitant to get too adventurous with flashing until then. Just sayin'... this is crazy.
got my t-mobile galaxy s a few days ago, tried all of button combinations to get into download mode, non seem to work, the firmware is jg3.
i'm now trying adb and still cant get into download mode, it's rooted and has no prob going into recovery mode, but i'm struggling with download mode... any ideas?
I had the same issue. Tried every method discussed including the examples on you tube... None worked. Only thing that worked for me... And consistently worked is the following.
1) remove back cover and take our simm card and sd-card.
2) take out the battery
3) hold both the volume up and volume down buttons at the same time.
4) while holding down those 2 buttons put the battery back in
Should load download mode at this point. If it doesn't work, try the above with the phone pluged in to your usb.
Sent from my SGH-T959 using XDA App
I have found a consistent way to get into the recovery. With the phone off hold the down the volume up and down buttons and also hold down the power button. Don't just press the power button and release it. The vibrant logo will pop up but the phone wont boot into android. The phone will go black and the samsung logo will pop up again. Now release the power button and it will go into recovery. At least it does on mine, every time.
Randel77 said:
I have found a consistent way to get into the recovery. With the phone off hold the down the volume up and down buttons and also hold down the power button. Don't just press the power button and release it. The vibrant logo will pop up but the phone wont boot into android. The phone will go black and the samsung logo will pop up again. Now release the power button and it will go into recovery. At least it does on mine, every time.
Click to expand...
Click to collapse
I agree, this works every time and on every vibrant i have rooted so far.
ive NEVER had an issue getting into recovery mode with the 30 or so Vibrants ive rooted, and ive NEVER had to use Odin.
seriously guys, this is soooo simple i really have no idea why anyone has problems with it...
I agree, this works every time and on every vibrant i have rooted so far.
I'm a DM for a tmobile retailer and i root probably 2 or 3 phones for customers every day. I keep all the files for vibrant/cliq/mt3g/mts/n1 on my SDcard so i can pop it in the customers phone and root.
ive NEVER had an issue getting into recovery mode with the 30 or so Vibrants ive rooted, and ive NEVER had to use Odin.
seriously guys, this sh!t is soooo simple i really have no idea why anyone has problems with it...
Click to expand...
Click to collapse
This thread is for download mode.
Sent from my SGH-T959 using XDA App
Best way for me is to turn off the phone, hold down the vol buttons, then plug in the usb. Goes into downloading mode without a problem.
Sent from my SGH-T959 using XDA App
Download mode: powered off, plug in USB, wait till you see the charging screen, then hold down both volume up & down buttons, then press and hold the power button till you see the vibrant logo and let go of the power button while still holding both volume buttons till you see download mode.
Recovery mode: same button sequence method but done while fully powered off (even before you see the charging screen if you have it plugged in)
Basically you can only get into download mode while powered off and the charging screen is on
Vol Down + Power did not work for me. My Vibrant will only enter download mode if I press Vol Down + Vol Up and do not touch the power button.
With all the ways posted here to get into download mode is anyone wondering why OP posted this?
his way or "adb reboot download" are very consistent ways to get there while playing around with roms and the such.
I really dont know why there is SOOOO much bad info on booting into recovery and download mode.
It IS a little trickier than normal but this is the best way...... Step by Step for both methods. The youtube ways and a lot of forum posts, especially before the vibrant came out were for the i9000 and other versions, and do NOT work on the vibrant, this is the true way to do this.
Download mode:
1. Shut down phone (pull battery if stuck in some kind of install through odin or flashing from sd)
2. Plug phone in (or when rebooting with it plugged in) wait till you see the green charging icon.
3. Press and hold Volume Up + Volume Down
4. While holding Volume buttons, press and hold power button
5. As SOON as the green battery disappears let go of the power button ONLY!
6. You are now in download mode.
Recovery: (the same first steps as dl mode)
1. Shut down phone (pull battery if stuck in some kind of install through odin or flashing from sd)
2. Plug phone in (or when rebooting with it plugged in) wait till you see the green charging icon.
3. Press and hold Volume Up + Volume Down
4. While holding Volume buttons, press and hold power button
5. Hold all buttons until the "Samsung Vibrant" screen disappears then wait for the battery icon to start to appear (you see the little wait circle) then release all.
6. Wait a quick second and you will see recovery start to load.
So the difference between booting into download mode and booting into recovery is you are holding all the buttons longer for recovery and only releasing the power button as soon as the green battery disappears.
Another note is to make sure that you wait for the green battery to appear before you start these.
This is very easy to do once you know exactly what to do, I had a hell of a time figuring it out the first time because of all the bad info. It really is quite simple though.
Related
There have been those that run into problems after installing the XXJP3I9000 update on the Samsung Captivate and attempt to reboot into recovery mode. The issue that they have is that since the Captivate has no physical home button to select an option like you can with the Galaxy S, you can't select an option, and therefore you can't reboot your device regularly. While I am in this same problem and have not figured out a solution, I have started this thread to post what knowledge I have about this issue so that others may help get this issue figured out. If anyone has information on how to fix this problem, please comment below. Let's fix this!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
First of all, the key combinations that standardly would work with the original captivate firmware will not work anymore. Pressing all three buttons (Vol+, Vol - and Power) will only power cycle the phone, that is, until you let up on the buttons. Pressing Vol+ and Vol- and then plugging your phone into the computer will also do nothing. (By nothing I mean will take you back to the recovery menu)
Every key combination will only take you back to the recovery menu, so key combinations seem to be out.
If you boot into recovery mode, take out the battery and put it back in, all the while keeping the phone plugged in to the computer, the phone will enter the "POWER RESET OR UNKNOWN UPLOAD MODE", which will show your device in windows as being a Samsung USB Composite Device and a Samsung Mobile Modem (gadget serial, Windows 7) While this may be helpful, you cannot run ODIN or ADB in this mode, nor does this allow disk access. If you have Samsung Kies installed, it will detect a device, but will never complete loading it.
Other information with this method: On the phone screen, as well as showing "POWER RESET OR UNKNOWN UPLOAD DEVICE" the screen will also show the following in red:
RST_STAT =0X1
PMIC_IRQ1 =0X0
PMIC_IRQ2 =0x0
PMIC_IRQ3 =0x4
PMIC_STATUS1 =0x40
PMIC_STATUS2 =0x2c
If this helps anybody, it was a pleasure
Another method I found briefly was that after installing Kies, and rebooting the phone into recovery mode (again) my computer detected four new devices, two of them being Samsung Android devices and one being a disk drive. Potentially, without freezing or error, the drivers that are included with the Kies software will detect and allow for disk management while the phone is in recovery mode. Three of the four devices installed without error for me, but the fourth, the actual Android device, continued to say "installing device" until I unplugged the phone out of frustration. It has since not detected those four devices again, and I have yet to figure out how to do that again. The nice thing about that was that although the adb.exe reboot download command did not work, adb.exe did detect the phone. if this is true then rebooting normally or into download mode should be easy.
The last thing I noticed is that button furthest to the left on the main screen on the captivate will close the recovery menu when pressed, and leave the background behind, and then will reopen the recovery menu when pressed again. This is showing me that the four touch buttons are operable, but not configured. If it were possible to reconfigure the actions that pressing these buttons do, then it would be easy to be able to reboot the device normally.
I have compiled information to the best of my ability, and here is a question to ask, that I think will help solve the problem. Can the captivate with I9000 2.2 software run adb in recovery mode?
Comments, Questions, and Most of all, answers would be appreciated for me, as well as for other users with the same problem as I. Hopefully, this thread can be the solving point for this problem.
Many Thanks,
TouchofDestiny
The n00b who isn't a n00b at all
An Update: The reason that the combinations don't work for me or either people is because they (and I) fail to install the captivate kernel, and that is making the volume power button controls useless.
same here i put froyo from the galaxy s i9000 and i cant change the rom or get into recoverymode because buttons dont work man this sucks and 3G or Edge doesnt work.....
You're problem is a little different. If you can't get into recovery mode, than that means you aren't in recovery mode, which means you can use ADB to enter download mode and use Odin to flash your phone. I have given up looking for a solution, and have sent my phone back to AT&T for a replacement. Since I'm still in my thirty day trial period, it doesn't matter if I used different firmware or not. Hopefully others won't get into the situation I had. For me, this thread is complete.
brandon9721 said:
same here i put froyo from the galaxy s i9000 and i cant change the rom or get into recoverymode because buttons dont work man this sucks and 3G or Edge doesnt work.....
Click to expand...
Click to collapse
hi,
I solved the same problem doing this:
start odin.
take out battery. plug in USB. press both volume buttons. insert battery while pressing those buttons.
Done. download mode should appear.
yep, same boat
I am in the same position here. I downloaded the froyo leak and installed it with odin, no problem there. Upon startup into froyo, all was good, except my phone was stuck in horizontal mode until I tilted it vertical, *then* it would go horizontal. So basically I am 90 degrees off kilter. I decided to look around for another rom to try, and in the process managed to get stuck in recovery mode. Couldn't tell ya what firmware I have, just what is on the endless recovery screen that I cannot get out of!
I have no external microSD card, only the SIM card, and no way to get it recognized on my XP or win 7 system.
Really, really stuck here, guys. I do have the androidsdk installed, if there is a way to get it to reboot. As it is, adb cannot see the device, so I am looking at a truly bricked phone.
And yes, this is a US phone, which is why the power button and home button are not mapped (I assume).
I am DESPERATE for some help here!
and while I am at it...
I WAS able to get into download mode with the shovel guy originally by using the 2 volume keys+power, usb (odin up), battery in, release power.
No more. No key combo works.
Totally bricked the Samsung, which is supposed to be impossible!
pkrouse said:
I WAS able to get into download mode with the shovel guy originally by using the 2 volume keys+power, usb (odin up), battery in, release power.
No more. No key combo works.
Totally bricked the Samsung, which is supposed to be impossible!
Click to expand...
Click to collapse
when you are on the i9000 rom the only button that will get you in download mode is the vol down
That's HUGE!
You, sir, are a gentleman, scholar, and all-round smart guy! How did I miss that? I coulda SWORN I was getting into download mode with both volume keys. I've never been so happy to see a little Dalek dude with a shovel in my LIFE. 2 minutes in the one-click installer and now I'm back in business!
Thanks for helping a terrified owner out, and preventing a trip to the AT&T store.
I cannot go to download mode
I have the same problem here. Stuck in the recovery mode after upgrade the froyo and had the orientation problem. How do you go into download mode or power reset or unknown upload mode? Any button combination doesnt seem to work for me.
How do I do?
Please HELP. I am struggling here
Thanks
xaga150 said:
I have the same problem here. Stuck in the recovery mode after upgrade the froyo and had the orientation problem. How do you go into download mode or power reset or unknown upload mode? Any button combination doesnt seem to work for me.
How do I do?
Please HELP. I am struggling here
Thanks
Click to expand...
Click to collapse
the key to the i9000 rom/kernel button combo is VOL DOWN + using the USB trick. do not press vol up + down, just the down while you are plugging in the usb cable
i too am stuck in recovery mode. the only way i can get into download mode is by using both volume buttons. just holding the down button just sends me to revoery mode as well. how can i fix my phone in download mode?
nevermind, reinstalled 2.2 and it works now.
Eureka I got it...I think
I installed froyo 2.2 i9000 on my captivate and got stuck in recovery mode...power button doesnt select and when I hold down the up and down vol buttons I couldnt get the downloading icon anymore either. Then I remembered something from another post....
Home + Vol Down + Power = Downloading Icon
It worked for me....let me know if this helped....I'm officially unbricked.
Hey. I'm in the same boat. My Captivate has I9000 firmware running it and it won't run properly. I can't access the settings to enable USB debugging in order to boot in either Recovery or Download using adb and no button combination works for me. I can't use button combos to boot into either Recovery or Download mode.
Does anybody have any idea what is going on and how to fix this?
JPBetley said:
Hey. I'm in the same boat. My Captivate has I9000 firmware running it and it won't run properly. I can't access the settings to enable USB debugging in order to boot in either Recovery or Download using adb and no button combination works for me. I can't use button combos to boot into either Recovery or Download mode.
Does anybody have any idea what is going on and how to fix this?
Click to expand...
Click to collapse
JPBentley-- Since the I9000 firmware is set to use physical buttons, and the Captivate doesn't contain any, once you get into recovery mode, you cannot get out. The standard Captivate key combinations to get into download mode do not work, as do the combinations to get into download mode via the I9000 firmware. Basically, you get to a dead end. Unless there is some way to flash the phone's ROM outside of download mode, which I doubt, your best bet is to return the phone for a replacement. After haggling around with AT&T for a while, they admitted that installing the I9000 ROM doesn't invalidate your warranty, so they should take it back. They did with mine, and now I'm running the official Froyo leak. Good luck with your new phone!
SOLUTION
For all those that are having this problem, Ive struggled with it & tried EVERY possible button combination & nothing worked.
The ONLY solutions I have found is to use a usb JIG. Take out the battery, sim card & sd card, plug in the Usb JIG & put the batter back in. Give it a couple of seconds & I'tll enter recovery mode without pushing any buttons. You dont even need to push the power button, it's that simple.
Here is an image of how to make one if you are electronically inclined, personally I am not so I found a local electronic parts store & they put on together for me.
1.bp.blogspot.com/_3KjgtwnRiWM/TNTyjkZGquI/AAAAAAAABL4/7NSmqrYmkmU/s640/i900.jpg
If you want, you can also buy one online, I cant post a link becuase Im a new member but just search for "samsung usb jig" on ebay.com & youll find plenty.
shop.ebay.com/?_from=R40&_trksid=p5197.m570.l1313&_nkw=samsung+usb+jig&_sacat=See-All-Categories
yes, i think you need to build a jig or buy one online if you want to play with custom rom. you may not need it now, but you may need it just in case.
http://cgi.ebay.com/ws/eBayISAPI.dl...47234&ssPageName=STRK:MESELX:IT#ht_511wt_1139
agustinpac said:
hi,
I solved the same problem doing this:
start odin.
take out battery. plug in USB. press both volume buttons. insert battery while pressing those buttons.
Done. download mode should appear.
Click to expand...
Click to collapse
OMG you saved my life
thx so much for your post
I have the same problem, i can get into recovery mode. I can also get to download mode but Odin doesnt see my phone and neither does adb. By pulling the battery with no buttons pushed it goes straight into recovery mode. Looks like I have a brick now. If anybody has any suggestions please let me know.
drowe24 said:
I have the same problem, i can get into recovery mode. I can also get to download mode but Odin doesnt see my phone and neither does adb. By pulling the battery with no buttons pushed it goes straight into recovery mode. Looks like I have a brick now. If anybody has any suggestions please let me know.
Click to expand...
Click to collapse
That's not even close to a brick. Are you using a usb port closest to the motherboard on your pc? Is your cable good? Make or buy a jig, that will put your phone into download mode.
Sent from my blazing fast Captivate running Continuum GB ROM using Tapatalk Pro
Hey Guys I know there a lot of threads like the one I am about to start up but those do not apply to what I have done to my phone.
So to start off I know I do not have a lot of posts but that is because I usually find all of the information that I need by reading through the forums. I have experience with flashing various roms onto my captivate. Today I decided I would try out an I9000 rom on my Captivate. I was following the instructions provided by this link
http://forum.xda-developers.com/showthread.php?t=791366
I downloaded the files that the poster said to download. I got to step 2 where I flashed the JM8 PDA. I think this is where I messed up because I after I did this my phone boots directly into recovery and spits some information out. Which is the following (this is the text under the recovery menu options):
update media, please wait ...
update media, finished
# MANUAL MODE #
-- Appling Multi-CSC...
Installing Multi-CSC
mps_dat value: ATT
copy_multi_carrier from: ATT
multicsc : can not access to /system/csc/ATT/system/
copy_common_data
Thats the end of the information spit out by the recovery menu. My problem is that since I flashed some version of the I9000 kernel there is no way for me to enter the download menu so I can restore back to stock. Please Please guys I really need the communities help with this. I am screwed if I take the phone to AT&T because when the phone boots it has the I9000 splash screen that says galaxy s phone gt i9000.
The help will be greatly appreciated and I might even make a donation to the person that can help me!
Yank out battery, close Odin, Remove USB
Open Odin
Insert Battery
Hold Volume down (NO POWER)
Plug in USB
Phone should go into download mode - Start flash
Hey zilch I have tired that as well and I just keep going into the same recovery menu as before. Do you think it might be the fact that I do not have the galaxy s drivers on my computer???
If you can't get into download mode with the button combos (hell, I couldn't) you should still be able to use adb to reboot into download mode. So:
Plug in usb
Open Odin
type from a console in the android sdk tools directory "adb reboot download"
Use odin when you get into the download mode.
Also, Zilch, you've helped me out before, you're the man.
abezapata said:
Hey zilch I have tired that as well and I just keep going into the same recovery menu as before. Do you think it might be the fact that I do not have the galaxy s drivers on my computer???
Click to expand...
Click to collapse
You dont need separate drivers if you had the Captivate ones installed... it should work either way, but if you have no drivers at all, that could be an issue
Edit: If it's plugged into USB and you didnt hit power it shouldn't power on the phone to go into recovery menu... if you did the button combo wrong it should just show the battery
No i do have the captivate drivers installed. I was coming from cognition so maybe that is a problem??? I am really open to any suggestions!
abezapata said:
No i do have the captivate drivers installed. I was coming from cognition so maybe that is a problem??? I am really open to any suggestions!
Click to expand...
Click to collapse
Install the drivers!
I meant I do have the Captivate drivers installed but when the phone turns on and enters recovery mode my computer (windows 7 x64) notifies me it is searching for drivers and then fails.
To get into download mode:
1. Remove Battery, SIM, SD
2. Open Odin
3. hold volume up + down buttons
4. While holding them down, put the battery
5. still holding them(buttons) down, plug the usb cable.
Phone should go to download mode and Odin should detect it.
Zilch25 said:
You dont need separate drivers if you had the Captivate ones installed... it should work either way, but if you have no drivers at all, that could be an issue
Edit: If it's plugged into USB and you didnt hit power it shouldn't power on the phone to go into recovery menu... if you did the button combo wrong it should just show the battery
Click to expand...
Click to collapse
When I plug in the phone it shows the batter and the loading bars for a couple of seconds and then automatically enters the recovery menu. I have not touched any of the buttons the whole time this happens.
abezapata said:
When I plug in the phone it shows the batter and the loading bars for a couple of seconds and then automatically enters the recovery menu. I have not touched any of the buttons the whole time this happens.
Click to expand...
Click to collapse
So if you unplug the phone from USB while it's off, then hold volume down, and plug in USB nothing happens or does it do the battery thing?
Okay so through some miracle of god I got the adb to detect the phone and I sent it into download mode but odin wasnt open and now I am getting the mobile phone image/ warning image/ pc image!
abezapata said:
Okay so through some miracle of god I got the adb to detect the phone and I sent it into download mode but odin wasnt open and now I am getting the mobile phone image/ warning image/ pc image!
Click to expand...
Click to collapse
From that screen if you can't get your button combos to work you're pretty much toast =/
You can try:
USB
Unplug battery
Plug in battery
Hold both volume buttons + power
keep holding the buttons, the screen will turn off, then turn back on
As soon as the screen goes black again, release the power button and hope that you get the android digger
MY PHONE IS FIXED!!!!!!!!!!!! I think what did the trick is I installed Samsung Kies and that gave me all of the drivers for the samsung phone thus giving me the ability to use adb in recovery. Thanks guys! Your'e post encouraged me to keep trying and not cuddle up in the fetal position crying myself to sleep!
Zilch25 said:
From that screen if you can't get your button combos to work you're pretty much toast =/
You can try:
USB
Unplug battery
Plug in battery
Hold both volume buttons + power
keep holding the buttons, the screen will turn off, then turn back on
As soon as the screen goes black again, release the power button and hope that you get the android digger
Click to expand...
Click to collapse
Yeah thanks man once I saw those icons I knew I was good because I have seen them before. Thanks for the help!
abezapata said:
Yeah thanks man once I saw those icons I knew I was good because I have seen them before. Thanks for the help!
Click to expand...
Click to collapse
Whew... well I'm glad you got it back, we've had so many perma-fails lately with the OTA these days it's nice to see a miraculous recovery Improves morale around here!
this thread just saved my life. thank you to everyone that contributed
For future reference, since the button combos are different on the i9000 vs. the Captivate, I've found that I get into download mode every time on an i9000 ROM by yanking the battery, and then re-inserting it while holding volume down+power. I know you already got it resolved, but just keep that in mind, as it has never failed me. Only wish I knew about that combo back during the whole JPC fiasco!
Here's how it happened:
I was trying to swap Kernels by following instructions on cognition thread. I flashed the stock kernel and tried to apply the update.zip, and it gave me errors. I tried to reboot and the ATT screen came up and wouldnt boot. I was able to get it into download mode using adb, so I flashed the JI6 kernel. Now it won't go into download or recovery mode (just ATT screen).
Here's what I have tried:
- volume up/down + power buttons. released power button and recovery mode wouldn't come up.
- with power off, pressed volume up/down. Did not enter download mode.
- power + volume up. got a screen saying power reset or unknown upload mode?
- tried just hitting power and letting it sit for a long time to see if it would boot, but it just stays at ATT screen.
- adb reboot download (with device plugged into usb) - said device not found.
Is there something else I can try to get it into recovery or download mode? I figure I can flash the stock PDA if I can get that far. Is there something that a phone repair shop can do (special software, etc.) to help?
Any help would be appreciated.
Jason.
Have you read the READ ME BEFORE FLASHING sticky on the dev forum?
But.. try this:
Turn off your phone.
Take out the SIM, any external SDCard, and Battery
Plug in your USB Cable
Turn on Odin 1 Click - OTA JH7 Back to Stock
Hold down the +/- VOLUME Buttons on the phone.
Pop the battery back in - should go directly into DOWNLOAD mode using this method. If it goes to the gray "Battery Charging" picture.. unplug, take out the battery, and try it again.
And you had USB De-bugging turned on before you were doing all this (I'm guessing yes) Hopefully the above works.
BTW whenever it goes south like this .. better to just go back to stock and try again rather then potentially making it worse
thank you! That got me into download mode. I was able to flash back to stock. I was scared for a while.
Jason.
NP.. next time though read the Q&A sticky - should point you in the right direction a lil' quicker
And if you plan on to keep flashing new ROMs? Def go there first it should point you to different posts to keep you from having this issue in the future.
Help guys.
I have a Samsung Galaxy S Captivate I897. Last night I installed the Clockworkmod ROM Manager in there and was messing around with it.
I choose my phone model to be the the I9000 and then I went into recovery mode to restore the previous ROM, but guess what? It went into recovery mode, the volume up and down buttons select the menu items and it asks me to hit the "OK key" to enter.
The Captivate doesn't have an OK key, it uses the power button. So the Android Recovery Mode here thinks the phone is a I9000 and I can't get it to do anything other than reboot into that mode.
I've tried using the ADB to try to get back into download mode but it's no longer reading the phone. The volume + power buttons to go into that mode has never worked for this phone either.
I'm at a loss at what to do. Is there anyway I can get out of recovery mode and into download mode or back to regular phone usage here? Would I need to take it to an android developer?
Thanks for your help.
Thanks for your help.
vancouverguy said:
Help guys.
I have a Samsung Galaxy S Captivate I897. Last night I installed the Clockworkmod ROM Manager in there and was messing around with it.
I choose my phone model to be the the I9000 and then I went into recovery mode to restore the previous ROM, but guess what? It went into recovery mode, the volume up and down buttons select the menu items and it asks me to hit the "OK key" to enter.
The Captivate doesn't have an OK key, it uses the power button. So the Android Recovery Mode here thinks the phone is a I9000 and I can't get it to do anything other than reboot into that mode.
I've tried using the ADB to try to get back into download mode but it's no longer reading the phone. The volume + power buttons to go into that mode has never worked for this phone either.
I'm at a loss at what to do. Is there anyway I can get out of recovery mode and into download mode or back to regular phone usage here? Would I need to take it to an android developer?
Thanks for your help.
Thanks for your help.
Click to expand...
Click to collapse
Shut off the phone, open up odin(DG's flash to stock one) hold the power and the menu button. Once you see the ATT screen release the power while continuing to hold the volume buttons. Once odin recognizes your device flash to stock using the utility. Once this works donate to DG for saving your ass. Also, quit using ROM manager. Just use the update.zip method everyone else uses.
+1 for just using CWM update.zip It is sooo much easier/faster.
Thanks, but it didn't work. My Galaxy S is one of those where the volume + power buttons don't work to get it into download mode.
I did try power + menu as you suggest, but that doesn't work either.
try this
1. open odin.
2. With phone unplugged remove battery
3. with battery removed plug phone into pc via USB
4. with battery still removed simultaneously hold down Vol. + / - (forget about power button just hold down the two vol buttons)
5. While holding down the vol + / - insert the battery (keep the vol buttons down and hopefully DL screen comes up)
silverslotcar said:
+1 for just using CWM update.zip It is sooo much easier/faster.
Click to expand...
Click to collapse
I cannot stress this enough.
Also, OP, if the above doesn't work, it might be USB jig time.
pwr isn't used to go into dload mode - that would turn your phone on.
Do this:
Open odin
Remove bat, sim, ext mem card
replace bat
hold vol -/+ and plug in data cable to computer
(should be download mode)
If that fails, then get yourself a jig... gotta search for the thread though - should cost a couple dollars. Then once you're back up... look up the thread to fix the 3 button combo.
You might try turning the phone off then hold VOLUME DOWN and POWER (not vol up/dwn/pwr) to get into download mode. Make sure to remove the sim and sd cards.
I bricked my phone over the weekend and had similar problem you did.the easiest way too get out in to download mode is a jig. Its easy and cheap to do.look on you tube under un brick captivate fort a tutorial.
Sent from my SAMSUNG-SGH-I897 using XDA App
Question about using update.zip to install clockwork recovery after flashing to stock (and avoiding Rom Manager):
Is rooting still required?
doreyu said:
Question about using update.zip to install clockwork recovery after flashing to stock (and avoiding Rom Manager):
Is rooting still required?
Click to expand...
Click to collapse
Nope. No root needed
mcord11758 said:
Nope. No root needed
Click to expand...
Click to collapse
Awesome, great that would be hugely faster, thanks.
doreyu said:
Awesome, great that would be hugely faster, thanks.
Click to expand...
Click to collapse
Once you learn that trick you are on stock for like 2 minutes before you flash
Yeah I'm kind of a lurk but I've been around for about a month just flashing everything, and I had no idea it could be done like this till today. Going to make my next one even faster.
Sent from my SAMSUNG-SGH-I897 using XDA App
Nothing seems to work.
I'm going to try the jig method Wednesday morning. Wish me luck!
I tried the jig and it didn't work.
What happened was that it got me back into recovery mode, not download mode. Tried it several times. So unless I'm hitting the wrong points on the phone usb plugin (other than the last two), I'm hooped.
I tried the direct resistor wire to points in usb plugin method. I didn't try the one where I cut open a mini-usb cable and use the plug as a dongle, although I think it may get the same result.
What do you guys think?
Samsung Galaxy Tab S2
SM-T710 8.0" Wifi
Nougat with all the latest updates
Wife hands me her tablet the other day and it is stuck in safe mode. Using notification shade link to turn off safe mode simply reboots to safe mode. To make this worse, the other method of on/off safe mode is to hold vol down with power. It seems the volume down button has failed. When android is running, pressing volume up raises the volume as normal, pressing volume down does nothing. Same in recovery, volume up works, volume down does not.
Looking around for solutions, I stumbled on this:
http://forum.gsmhosting.com/vbb/f777/how-exit-safe-mode-samsung-phones-simple-solution-here-1727011/
which claims to allow safe mode disabling with root. Ok, so I figure I need to root the tablet, no big deal. Well I'm stuck, I can't get it to work.
I've follow every guide I can find. Most all of them start with rebooting to download mode. The standard method is to hold volume down again, can't do that. So instead I use adb (adb reboot download). The use Odin to flash TWRP - no go. Every instruction I can find also says to hold volume down after Odin finishes the flash. Just powering off, and then holding vol up + power + home doesn't get me anywhere. I can boot back to android, reboot recovery, and it is only the stock. Even tried flashing a nougat (supposed) version of CF autoroot. That does something more, because the boot screen warns me that SE Andriod is not enforcing. But even that simply ends with rebooting to Android, no root. Interestingly, the last step in the CF Autoroot says "Restoring Stock Recovery", not sure why.
Ok, so there it all is. I'm stuck. Anyone have any ideas
a) how to get safe mode off with no vol down button
b) how to actually successfully root the latest nougat (again, with no vol down button)
Any ideas are much appreciated. Thanks
hdad2 said:
Samsung Galaxy Tab S2
SM-T710 8.0" Wifi
Nougat with all the latest updates
Wife hands me her tablet the other day and it is stuck in safe mode. Using notification shade link to turn off safe mode simply reboots to safe mode. To make this worse, the other method of on/off safe mode is to hold vol down with power. It seems the volume down button has failed. When android is running, pressing volume up raises the volume as normal, pressing volume down does nothing. Same in recovery, volume up works, volume down does not.
Looking around for solutions, I stumbled on this:
http://forum.gsmhosting.com/vbb/f777/how-exit-safe-mode-samsung-phones-simple-solution-here-1727011/
which claims to allow safe mode disabling with root. Ok, so I figure I need to root the tablet, no big deal. Well I'm stuck, I can't get it to work.
I've follow every guide I can find. Most all of them start with rebooting to download mode. The standard method is to hold volume down again, can't do that. So instead I use adb (adb reboot download). The use Odin to flash TWRP - no go. Every instruction I can find also says to hold volume down after Odin finishes the flash. Just powering off, and then holding vol up + power + home doesn't get me anywhere. I can boot back to android, reboot recovery, and it is only the stock. Even tried flashing a nougat (supposed) version of CF autoroot. That does something more, because the boot screen warns me that SE Andriod is not enforcing. But even that simply ends with rebooting to Android, no root. Interestingly, the last step in the CF Autoroot says "Restoring Stock Recovery", not sure why.
Ok, so there it all is. I'm stuck. Anyone have any ideas
a) how to get safe mode off with no vol down button
b) how to actually successfully root the latest nougat (again, with no vol down button)
Any ideas are much appreciated. Thanks
Click to expand...
Click to collapse
I doubt it's failed. Your volume down button is probably just stuck down which is why it continually boots to safe mode.
Volume up would still work.
Pop the back off and check the contact under the button isn't stuck down or get the vacuum cleaner hose with the slim attachment , place it over the button and it MAY just be enough to release it.
ashyx said:
I doubt it's failed. Your volume down button is probably just stuck down which is why it continually boots to safe mode.
Volume up would still work.
Pop the back off and check the contact under the button isn't stuck down or get the vacuum cleaner hose with the slim attachment , place it over the button and it MAY just be enough to release it.
Click to expand...
Click to collapse
You could be right. Wouldn't know it by the feel of the button. It feels perfect. And being in safe mode won't let me load any app or anything that might tell me one way or another.
I'm trying to avoid cracking the tablet open because I'm not sure I'd be able to fix it at all once I did. Probably can't physically see any issue it might have with the button. Plus it looks like a royal pain to open. But in the end I might be forced to try.
Anyone know a root method that doesn't involve volume down?
Terrible to think that the whole device could be rendered useless by a button that isn't critical to its use. (can turn down volume by hitting vol up and then using the slider on screen)
hdad2 said:
You could be right. Wouldn't know it by the feel of the button. It feels perfect. And being in safe mode won't let me load any app or anything that might tell me one way or another.
I'm trying to avoid cracking the tablet open because I'm not sure I'd be able to fix it at all once I did. Probably can't physically see any issue it might have with the button. Plus it looks like a royal pain to open. But in the end I might be forced to try.
Anyone know a root method that doesn't involve volume down?
Terrible to think that the whole device could be rendered useless by a button that isn't critical to its use. (can turn down volume by hitting vol up and then using the slider on screen)
Click to expand...
Click to collapse
You can get root no problem just by flashing a rooted Magisk boot image, but I doubt going to help with booting into safe mode as that button combo is hard coded.
ashyx said:
You can get root no problem just by flashing a rooted Magisk boot image, but I doubt going to help with booting into safe mode as that button combo is hard coded.
Click to expand...
Click to collapse
Well if root does not allow disabling of safe mode, then I'm out of luck. But this link indicated that it could work. I've never tried so I'm just grasping at anything.
How exactly can I install a rooted boot images without the following:
- No ability to install a playstore or any other app (no magisk manager)
- Can't get TWRP to install (presumably because this is now blocked by latest firmware?? Not sure but it fails for me following the Odin instructions I find here and elsewhere) I think this requires vol down button - at least all the instructions call for it after flashing TWRP with Odin
I have ADB and Odin at my disposal, but I can't seem to get Odin to actually install TWRP. CF Autoroot (for Nougat) does nothing either.
Am stuck in safe mode please my volume is not working galaxy tab 4 please help
Did someone solve this issue? I am also stuck with a non functioning tab due to one stuck button...
Stuck button
I had a friend with this issue. I was able to use a sewing machine needle to pop the button up. Make sure you tape or protect the side from scratches. Also, you can try holding down the volume up button. It's a meaningless combo so it may boot.