Related
Hey guys I think I actually did it. I was going to install the JPC Froyo Rom, and somehow booted into recovery in the ROM. Now whenever I turn the phone on it boots into recovery, and none of the button combinations work for putting it into Download mode so I can flash back to stock. On the i9000 thread it says that if you get into this situation you cannot flash back. Any of you guys run into this issue? If not then it looks like I'll be trying to convince an ATT rep to give me a new phone
Try powering off... Then hold vol up and down buttons then plug in usb.... That happened to me... Your not bricked
Sent from my SAMSUNG-SGH-I897 using XDA App
Connect to adb and run reboot command
Sent from my GT-I9000 using XDA App
Nope
Nope sorry guys I know all of what you just said. As for plugging in USB while holding volume buttons, it'll just go to that battery charging screen, and adb doesn't work because it doesn't boot past recovery. Sorry guys but yes it was bricked. It's okay though because I just went to ATT and since they can't identify the problem they just replaced the phone
Thought mine was bricked one night, too. Same scenario. Tried dropping the SIM and SD card out even though I didn't think it would make a difference, but it did. Got to download screen and reflashed with ODIN.
Good luck.
Sent from my SAMSUNG-SGH-I897 using XDA App
KCutrer1 said:
Nope sorry guys I know all of what you just said. As for plugging in USB while holding volume buttons, it'll just go to that battery charging screen, and adb doesn't work because it doesn't boot past recovery. Sorry guys but yes it was bricked. It's okay though because I just went to ATT and since they can't identify the problem they just replaced the phone
Click to expand...
Click to collapse
If you pull the battery, then put the battery in. hold both volume buttons buttons, and then plug the phone into the computer, it didn't boot to download?
Im curious if you even tried to use the Odin one click thread
There are 4 or 5 ways in that thread on how to get to download mode. And how exactly does this relate to development...just another curious thought. Well, you are getting a new phone, just hope that ATT or Samsung don't try to figure out the cause of your phone being "bricked".
AGAIN!
Okay after this I swear I won't be messing around with Froyo anymore. Here's the story: I got into download on the replacement captivate. Tried to install JPC froyo, but it never started flashing so I unplugged it from Odin and then tried to turn it back on. It goes to the normal "connect phone to computer" screen. However no attempts to get back into download mode have worked. Holding both volume buttons and power until second black screen doesn't work, booting while holding volume down doesn't work, holding both volume buttons and then inserting USB cable doesn't work. I think I'm stuck in this screen unless there's some incredible way I have yet to try. Anybody have any ideas? I would greatly appreciate feedback from the experienced users (Zilch25, designgears, kaik, reaver117), because I think I'd be pushing it trying to get it replaced a second time in such rapid succession
To flashman2002:
I put it in this section because it's in the development section that most flashing and such occurs so I thought there would be the greatest knowledge base. And yes I've pored over the one click thread and none of the methods mentioned there have any effect!
Jeez, I just scared the **** out of myself. I ran the remove lagfix script and it rebooted my phone but it was just a black screen. So I take the battery out. Bad Idea. It showed the ATT screen but just black after that. I could get it into recovery mode but not download. Then I messed some more and would only show a vague disconnected pic.
Finally I got it into download by doing this: (had odin open before hand)
1. took everything out including sim and usb cable.
2. quickly inserted battery and held volume buttons and very quickly inserted usb.
I'm pretty sure its the speed that matters because I tried about 4 times and only when I did it really fast did it work.
ThisWasATriumph said:
Jeez, I just scared the **** out of myself. I ran the remove lagfix script and it rebooted my phone but it was just a black screen. So I take the battery out. Bad Idea. It showed the ATT screen but just black after that. I could get it into recovery mode but not download. Then I messed some more and would only show a vague disconnected pic.
Finally I got it into download by doing this: (had odin open before hand)
1. took everything out including sim and usb cable.
2. quickly inserted battery and held volume buttons and very quickly inserted usb.
I'm pretty sure its the speed that matters because I tried about 4 times and only when I did it really fast did it work.
Click to expand...
Click to collapse
Nope. Unless you can do this with godly speed I dont think it'll work. I just got to the "Connect Phone to Computer" screen again.
You had the usb in before anything appeared on the screen right?
ThisWasATriumph said:
You had the usb in before anything appeared on the screen right?
Click to expand...
Click to collapse
Yeah originally. I can get to that screen now by just putting the battery in and holding power button. It seems to behave exactly like it normally would, just can't get out of it.
What screen? The screen you want has a big yellow triangle and says download.
ThisWasATriumph said:
What screen? The screen you want has a big yellow triangle and says download.
Click to expand...
Click to collapse
No it's on the phone...!...computer screen. That's what I'm saying, it's been stuck here for a while and none of the methods described on the one click thread work. I've been here before and just holding volume buttons and holding down power for it to boot twice and releasing would do it. Not so anymore. Can't get into download mode doing anything!
Well I read In the SRE thread I think that there are reports of newer phones not responding to any button combos. Bad batch they said not on purpose...
Also for the i9000 apparently you only have to hold the down volume key so since you flashed a i9000 rom try that if you haven't already.
You cant get into recovery right? Just holding volume and power then letting go of power after a bit?
Adb reboot download...
Sent from my SAMSUNG-SGH-I897 using XDA App
ThisWasATriumph said:
Well I read In the SRE thread I think that there are reports of newer phones not responding to any button combos. Bad batch they said not on purpose...
Also for the i9000 apparently you only have to hold the down volume key so since you flashed a i9000 rom try that if you haven't already.
You cant get into recovery right? Just holding volume and power then letting go of power after a bit?
Click to expand...
Click to collapse
Nope none of it works. I just got it replaced less then 3 hours ago and I already bricked it. I hope somebody finds out something that'll get this fixed. Maybe some way to force download mode through a computer application or something.
Well theres adb like mentioned above but im pretty sure that requires at least recovery mode working.
Like i said before i was stuck on the same screen so maybe theres still hope.
If all else fails someone will figure out how to JTAG these things eventually...
ThisWasATriumph said:
Jeez, I just scared the **** out of myself. I ran the remove lagfix script and it rebooted my phone but it was just a black screen. So I take the battery out. Bad Idea. It showed the ATT screen but just black after that. I could get it into recovery mode but not download. Then I messed some more and would only show a vague disconnected pic.
Finally I got it into download by doing this: (had odin open before hand)
1. took everything out including sim and usb cable.
2. quickly inserted battery and held volume buttons and very quickly inserted usb.
I'm pretty sure its the speed that matters because I tried about 4 times and only when I did it really fast did it work.
Click to expand...
Click to collapse
I know it doesn't help you out now, but when you remove the lag fix, just leave it set on the black screen. It's doing its thing. It will reboot when it's done. The home keys should still light up if you press them in this state...
Well thanks for your input anyway guys. Hopefully somebody figures something out. For now I guess I'll keep the SIM in my old iPhone 3G so I at least have a phone. Tomorrow I'll go to another ATT store in my area. Chances are the rep won't know what the hell that screen means and will replace the phone promptly.
So I was attempting to flash back to stock with Odin (I was using Assonance 5.2). I turned the phone off, then while holding the volume buttons plugged in the USB like normal. Then Odin said added the phone, then I hit start. And it seemed like it was working just fine, then all of a sudden the screen on the phone turned red. Then the status bar on Odin stopped moving completely (stayed for awhile). So I think I made the next big mistake of just disconnecting the USB and taking out the battery. So now the phone won't turn on. So I'm not sure I hard bricked the phone or what? Anyone have any idea? Thanks!
I've plugged the phone into the outlet charger, still nothing happens. This happened like maybe 15 min ago. No action when plugged in the computer or charger. Can't even boot into recovery I don't think. the power button was giving me some trouble earlier today. whenever I was trying to wake the phone up, it seemed to take a few clicks of the power button to wake the phone. This happened only after I flashed Assonance 2.5, so I wanted to flash to an earlier version of the rom. thanks!
What you want to do is get into Download Mode, and flash with Odin One-Click JF6 to get your phone working again..
Have you tried all the various button combos to get into Download Mode? .
If the button combos don't work, you can always try to build/buy a JIG which will force your phone into Download if it's still possible on your phone.
I've tried to get into download mode, but can't seem to do it. I've tried holding the volume up and down button then plugging in the usb (which didn't work). then i tried the taking the battery out, then holding the volume up and down button and power button, then plugging in the usb, then reinserting the battery, then taking my hand off the power button (which didn't work). what is the JIG method?
edit. ok i have no clue wtf just happened, but i am currently in download mode using odin and flashing back to stock.....this is just too weird.....sooo any rom suggestions?
Look in my signature for an example of a JIG.
norcal einstein said:
Look in my signature for an example of a JIG.
Click to expand...
Click to collapse
cool i'm actually gonna go ahead and get one this things......JUST in case of future screw ups that don't have a happy ending
i clicked on the link but it won't let me go the page. below is the message it gave me.
marefin, you do not have permission to access this page. This could be due to one of several reasons:
Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation.
marefin said:
cool i'm actually gonna go ahead and get one this things......JUST in case of future screw ups that don't have a happy ending
Click to expand...
Click to collapse
Definitely a great idea having the jig. Nor cal can attest to the late night save that jig provided me.
Sent from my SGH-T959D using XDA App
When I tried to disable the voodoo lagfix my phone froze, after about 20 minutes i decided to pull the battery and now the phone freezes when trying to boot and even after plugging in the charger, it freezes on the battery load symbol. Unfortunately, the 3 button way to get to the recovery menu doesn't work. help me please??
I'm having the same problem - phone just hung on the kernel load screen (firebird 2) after trying to shut off lagfix - although I can get to a red recovery mode menu. Not that it's helping at this time. It would be nice if I could recover without a clean wipe of the phone.
Anyone have any ideas. I'll be scouring the threads...
You could try making a jig and flashing to stock http://forum.xda-developers.com/showthread.php?t=841512
how are you getting to the red recovery menu?
i have the same kernel and i'm running the firefly 1.5 rom
I can't boot into anything and the only solution i have so far is to make a jig or buy one and not have a phone for a little bit, which is going to suck..
I've tried the following combinations, just because I know people are going to ask.
1. take out battery, sim, etc.
2. leave out for about 15 seconds
3. plug in the battery, plug in usb and hold two volume buttons-> freezes while trying to load battery status
3.b same precedure as above except plug in usb first hold volume buttons then battery-> still frozen
3.c hold volume buttons, battery, then power button, let it cycle atleast 2 times and let go of power at att logo while holding the volume-> frozen at kernel loader
3.d same as above but with only one volume button at a time, both up and down-> no cigar
3.e all the precedures above while wildly pressing all the soft keys (home, search, yadda yadda) out of frustration -> thinking, gosh i'm screwed
did i miss out any secret other combinations or methods known to work?
I'd really like to do this without hardware, but making a jig kinda sounds like a fun project and i do have a soldering iron in storage somewhere...
xsamxoxo said:
how are you getting to the red recovery menu?
i have the same kernel and i'm running the firefly 1.5 rom
I can't boot into anything and the only solution i have so far is to make a jig or buy one and not have a phone for a little bit, which is going to suck..
I've tried the following combinations, just because I know people are going to ask.
1. take out battery, sim, etc.
2. leave out for about 15 seconds
3. plug in the battery, plug in usb and hold two volume buttons-> freezes while trying to load battery status
3.b same precedure as above except plug in usb first hold volume buttons then battery-> still frozen
3.c hold volume buttons, battery, then power button, let it cycle atleast 2 times and let go of power at att logo while holding the volume-> frozen at kernel loader
3.d same as above but with only one volume button at a time, both up and down-> no cigar
3.e all the precedures above while wildly pressing all the soft keys (home, search, yadda yadda) out of frustration -> thinking, gosh i'm screwed
did i miss out any secret other combinations or methods known to work?
Click to expand...
Click to collapse
I'm afraid not. This happened to someone I know and they told samsung the OTA update bricked it and AFAIK they fixed it for free. They never tried using a jig though, so if you don't want to wait to replace it or anything you could try a jig since it might work and the parts are pretty easy to get (and if you'd be replacing the phone, a jig is ALWAYS good to have anyway)
Just another note to throw in there, the computer recognizes the phone, but strangely my computer freezes while trying to read the media storage drives. I can't tell if the internal sd is mounted because of the ever-lasting wait but i'm almost positive its not.
Do adb commands work?
Sent from my SGH-I897 using XDA App
Thnikk said:
Do adb commands work?
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
nope, it says "error device is offline"
You could try ... when the phone is booting and trying to catch it before it freezes is spam the heck out of the command adb reboot download then after hitting the enter button hit the up arrow and keep repeating until either the phone a) hopefully goes into download mode or b) freezes and throws the error.
Who knows.. might get lucky.
avgjoegeek said:
You could try ... when the phone is booting and trying to catch it before it freezes is spam the heck out of the command adb reboot download then after hitting the enter button hit the up arrow and keep repeating until either the phone a) hopefully goes into download mode or b) freezes and throws the error.
Who knows.. might get lucky.
Click to expand...
Click to collapse
it connects even though the phone is frozen. I'm heading over to "The Shack" pretty soon and just making a jig.
Thanks for all your help everyone.
Edit: Just confirming that with much dedication and a steady hand I finally have my captivate up and running with the help of the resistors. I also flashed the 3 button fix stock rom.
Well, I kept trying the least invasive methods first. Tried to reflash Firebird. Then went adb and such. In the end, it was pretty clear that it had hung at the lagfix correction, and I was dealing with a file system error. I was eventually able to get into download mode. The hardest discovery was finding that I had gotten the wrong drivers from samsung. The ones in the [stock rom] odin master clear page were what I should have been using. When I loaded those, the computer recognized that I had a phone and not a "serial gadget" and then I knew I was close. Odin finally saw the phone, and a couple tries at "light" re-stocking failed at file analysis, so I did the repartition (aha, file system error), and it shot through the whole process and I had my phone back and flashed to Serendipity in about 20 minutes.
But I would like to know about the red menu. That was unexpected (blue for standard, green for cwm).
No need for a jig. I had access to some phone functions, most importantly, download mode.
Okay I was using odin one click it was at rebooting device after it completed pushing stock onto the phone thats when I discounted the usb.... should have waited two secs I know but now the phone doesn't seem to get past the att world phone screen keeps looping over and over I have tried all the key combos different times and ways, vol up and down being held doesn't get to download mode the screen remains black plunging in seems to get to charge mode where even plunging into the wall charger it loops trying to calculate the battery status... any method I haven't tried... I did get it to boot once full and was usable didn't think to redo odin at the time and restarted back to this mess...tried three different jigs using the 100k 5% X3 even through its not a full brick due to the button combos gotten no where. Please Help
Search the forum to build a jig in order to get into download mode. Or you may need to buy one just in case in the future.
http://cgi.ebay.com/ws/eBayISAPI.dl...69977&ssPageName=STRK:MESELX:IT#ht_623wt_1139
Try this:
Open Odin and plug your cable into your computer but not your phone yet
Pull battery on phone and put it back in
Hold both volume buttons down and then plug your phone in
It should go into download made and you can reflash the stock ROM
Can anyone please help, i have the exact same problem. No matter how i try to enter download mode, it just gives me a charging sign and when i start my phone, it goes into an infinite boot loop.
Try this:
1. Remove battery from phone, SIM card and MicroSD card (if you have one)
2. Wait AT LEAST 10 seconds with your phone in this state
3. Hold Volume Up/Down, don't let go
4. While holding the volume keys, insert the battery
If this worked, you should be in Download Mode almost instantly.
There are a lot of key combos for Download Mode, this is just one of them. If all the button combos don't work, you need to build/buy a JIG to force your phone into Download Mode.
norcal einstein said:
Try this:
1. Remove battery from phone, SIM card and MicroSD card (if you have one)
2. Wait AT LEAST 10 seconds with your phone in this state
3. Hold Volume Up/Down, don't let go
4. While holding the volume keys, insert the battery
If this worked, you should be in Download Mode almost instantly.
There are a lot of key combos for Download Mode, this is just one of them. If all the button combos don't work, you need to build/buy a JIG to force your phone into Download Mode.
Click to expand...
Click to collapse
Ahah Thats the same exact steps I was able to get the phone to boot that one time instead of the up down I was still attempting it to get past the loop holding the power button instead using those steps, if I had know it would have been one of the only times I would see it in there I would have pushed it to download with adb though...
can't test getting it to download mode now took it back fit the description of the standing on/off issue with the device still honored by warranty. And I wouldn't have posted without searching everywhere to make a jig, I made three of them though I noticed it still didn't get to download mode. I made sure that the last two jigs were done correct. Think that when it was disconnected from odin it wasn't done finalizing after the stock push gah >,< live and learn and do something else to the cappies XD.
Thanks for the link placing an order just in-case ~whistles looking around then side to side pushes another rom~ lalala
To offer my own advice if it ever happens again, what I've been able to do is:
1. Pull the battery out
2. Put it back in
3. Open Odin
4. Hold Both Volume Buttons (without holding the power button)
5. Plug the phone back in
It went immediately into download mode for me, Odin managed to time out several times while I was trying to flash a co-worker's Captivate to the official Froyo leak. One of those times I couldn't even get the phone to come up with any screen. I really do think this thing cannot be bricked.
BeowulfShaeffer said:
That has been my experience so far, too. I've "bricked" twice, once with an "all black" screen, and once with the phone-!-computer screen. I've yet to need a jig, though I thought I may have needed it last night when I got the "all black" screen.
Keep trying the different button press methods to get into download mode. It took me 4 attempts to get from "all black" to "phone-!-computer" to a happy robot digging away.
Click to expand...
Click to collapse
if you are out of luck, you may have to build a jig or buy one online.
http://cgi.ebay.com/ws/eBayISAPI.dl...69977&ssPageName=STRK:MESELX:IT#ht_623wt_1139
Ive used odin before changing roms and have gotten to download mode with combos on my last cappy before that night (dramatic music) en ways..
did some more digging on this bad ass info and learning community "XDA" hehe as to how it got the way it did, I found out I was updated with the new patch when I sent it for screen change to this shop, so...using odin one click with this creates a hang time to where it looked like it was finished after pushing jh6 (which was totally off should have used odin 3 and pushed jh2 then clockwork update to jh7) so thats when I disconnected (second noob mistake of the situation) basically blowing the finalization out and key combs for recovery and download mode. and im guessing the jig was made wrong too at this point >,<.
Oh
wmason92 said:
Can anyone please help, i have the exact same problem. No matter how i try to enter download mode, it just gives me a charging sign and when i start my phone, it goes into an infinite boot loop.
Click to expand...
Click to collapse
If you cant get your jig to work take it in to warranty (if your water inicators are sound and no physical damage) and say its power cycling on off at random times (which is true.. ) and it did it when you were sync to mini kies, did it an hour after the OP heh good luck
and I have yet to see the infamous yellow pc sign >,> <,< it can stay on the yellow brick road... thanks for the responses btw
Well the same thing happened to me and i got stuck with in an unlimited boot animation. Ive trying everything key combo possible and ive tried a jig but it just makes it reboot, and yes im sure im touching the right pins. If anybody can help with this dilemma i would really appreciate it. I want to return with warranty but my phone has a custom boot animation so im sure att probably wont accept it if they notice it.
wmason92 said:
Well the same thing happened to me and i got stuck with in an unlimited boot animation. Ive trying everything key combo possible and ive tried a jig but it just makes it reboot, and yes im sure im touching the right pins. If anybody can help with this dilemma i would really appreciate it. I want to return with warranty but my phone has a custom boot animation so im sure att probably wont accept it if they notice it.
Click to expand...
Click to collapse
Purchase jig from ebay, or google and try igo jig.
If your phone is turning on with jig you are not touching the right prongs. I know, I know it is not easy, but unless it if touching just right, it can turn your phone on.
Holy ******** i got it to download mode! For some reason i kept touching the same pins and nothing would happen. After about readjusting for about 5mn it finally worked!!!!
It has to be just so. Happy to hear
Wait, now its in download mode but my computer keeps saying usb device not recognized.
wmason92 said:
Wait, now its in download mode but my computer keeps saying usb device not recognized.
Click to expand...
Click to collapse
That happens try a different usb port or just borrow someone else computer, I used my networking classes computer my laptop was doing the same thing when I was change roms.
Changed the title to fit the issue, this is not a soft brick this is a boot brick that can affect the charge indicator in power off state as well. So whats the difference the soft brick is when you flash a rom incorrectly and you get the att world screen constantly staying on, the key combinations still work when the phone is like this.. in the case with a boot brick the att screen cycles over and over and the jig may or may not work I haven't been able to fully test it here in this state I have seen a packager attempt to finish once on the recent one but all the key combos I could find didn't function my noob guess is the phone forgot how to ride a bike (meaning is hasn't connected keys to recovery that was being flashed or hardware to there states without being booted normally) ultimate fix is if its in warranty (meaning no physical damage or water) take it back for power on off. the soft brick i've seen before and have fixed with odin 2-3 three times, and ive seen a blown kernel type too where keys and odin fix up like new.
wmason92 said:
Well the same thing happened to me and i got stuck with in an unlimited boot animation. Ive trying everything key combo possible and ive tried a jig but it just makes it reboot, and yes im sure im touching the right pins. If anybody can help with this dilemma i would really appreciate it. I want to return with warranty but my phone has a custom boot animation so im sure att probably wont accept it if they notice it.
Click to expand...
Click to collapse
I have the same thing happening to me. Att boot screen, then it loops on the ROM logo, over and over. I get 1 vibrate then 2 following also. I purchased a Jig on ebay but it just keeps rebooting the phone, doesn't get it into download mode.
glaze76 said:
I purchased a Jig on ebay but it just keeps rebooting the phone, doesn't get it into download mode.
Click to expand...
Click to collapse
Very odd - I've never heard of that with a jig.
glaze76 said:
I have the same thing happening to me. Att boot screen, then it loops on the ROM logo, over and over. I get 1 vibrate then 2 following also. I purchased a Jig on ebay but it just keeps rebooting the phone, doesn't get it into download mode.
Click to expand...
Click to collapse
Have a link to which one you have? It sounds like the solder points on the jig were a little weak. This can happen if they aren't good welds. If you want give one of mine a shot. I'll refund you if it reboots your phone...
Buy one HERE...
I had a boot brick happen to me just the other day. I was running Andromeda 1.1 with stock kernel & modem, and tried to tinker with swapping the AT&T boot screen using connexion2005's video on the subject (NOT insinuating any blame at all, his videos are fantastic).
I tested it successfully the first time, then flashed back the i9000_param_lfs, and pushed a new image to the device again (everything was exactly the same, with the exception of the boot_screen.bat script not making the phone ask for superuser approval while pushing the new logo_ATNT), and everything looked ok.
Reboot device, and...boink.
Black screen, no image at all on power on, only charging screen when usb cable connected. ADB, nothing. 3 button, nothing. Vol up+down, remove battery, insert usb cable, do hokey pokey, nothing. 5 attempts at the 100k resistor jig, for hours, nothing. No download, no recovery. Seems like the phone was toast.
Strange how I had just done this successfully earlier in the day, to now having it completely hard brick this phone.
I ended up taking the phone back to a local warranty center, and they swapped it (1008) for a 1010 (gps works fantastic on this one, btw)...I just hope there's no bill coming if they find out it was rooted and flashed. *crosses fingers and uses any and all karma*
Any ideas what happened? Did I scramble this things boot loader? I've heard how hard it is to fully brick this phone, and looks like I succeeded. How lucky.
I'd just like to know what went wrong so when I (or anyone else) root and flash next time, the chances of this happening are reduced (or better understood).
Thanks
Hello everyone,
Ok so here is the story,
I had this Galaxy Gear sitting around for awhile and thought to myself I think I should try and root this thing...
I have rooted phones before so I was pretty confident this was going to be easy. Well I was wrong. I went through countless posts and youtube videos finally figuring out small things I did wrong....( I have a new laptop so I had a bunch of android stuff i needed to download)
I eventually managed to root it and install Superuser. Everything was going great until I had to install recovery. I powered it down into the download option and I managed to flash what I thought was the recovery...Problem was I forgot to turn off the restart feature in Odin. SO the watch restarted. When trying to get back into download mode I realized the power button would not do anything anymore. Just stopped working. Well I figured ok maybe I can get around this ...so I downloaded an app to restart the watch for me, you know bypassing the actual button...well....that was a pretty stupid idea. I now have a watch that will not power on. If I plug it into its cradle into the computer it charges but with no button I guess there is no way to actually turn it back on...
I am at a loss now and thought maybe I could fish for some fixes.
Any ideas?
PS: the button goes in...it doesn't seem like the physical button is actually broken.
So just an update:
I managed to get it back up by waiting a half hour and pressing the power button a few times in a row (Honestly I dont know why it worked now) but the button is still sort of useless because it still will not work to power down or reset. Which means there is still no way to get it into download mode.
I am not sure if this is a physical button problem or did I actually do something when it was flashing recovery.
Have you got null on it?