Hello, I have an original ADP1, updated to the latest official HTC images
I have:
radio: ota-radio-2_22_19_26I.zip*
recovery: signed-dream_devphone_userdebug-ota-148830.zip*
I want to be able to install other ROMs, like the ones offered in "Android Development".
There are a lot of guides out there on how to do that, my problem is that I want to do a nandroid backup first, before doing any flashing.
For doing a nandroid backup, I understand that I either
1) need to flash a special recovery image so I don't need a PC to restore the backup,
OR
2) Have busybox installed, and run nandroid.sh from recovery mode.
Correct so far?
I wanted to go with option 2), since I can perform a backup before flashing anything on my device. The only problem is that I don't have busybox installed.
I have seen a busybox build (over here http://benno.id.au/blog/2007/11/14/android-busybox ) which is 1.8MB because it is presumably compiled against libC, and have read here that jesusFreke was building one with bionic.
Is the bionic version anywhere to download? I suspect its in newer roms, but I *do not* want to flash a rom just to have busybox, since i only want busybox so I can perform nandroid updates before doing any flashing.
I understand that after having busybox, I just push it into /usr/xbin, --install, and nandroid will just work?
Anyone got a download to the latest, most stable and complete busybox? I would prefer one compiled for android (linked against bionic, etc..)
(what busybox version do you guys use?)
Thanks for your help and sorry for the LONG POST!
Superken7 said:
Correct so far?
I wanted to go with option 2), since I can perform a backup before flashing anything on my device. The only problem is that I don't have busybox installed.
Click to expand...
Click to collapse
I can't address most of your post, but there's a flaw in your reasoning that might make it a moot point.
Nandroid won't backup the recovery image - only the primary OS and data. So making a backup using Nandroid on your stock device won't be any different than installing a modified recovery, then backing up your device.
Really, installing the recovery is a trivial activity with little* risk of damaging your phone.
*No guarantees in life, but I wouldn't worry one bit about it.
Thanks for the quick answer!
I guess i'll look for a recovery image that fits my needs then
Let me suggest Cyanogen's Recovery 1.3.1 - As far as I know, the only one with both Nandroid backup and restore. Also has USB mount, really handy for loading updates if your device is fubared and you don't have a card reader.
http://forum.xda-developers.com/showthread.php?t=523558
Grr, double post.
Yay thanks!
I guess there are no compatibility problems between recoverys? I mean, just like you need a certain radio version in order to update the SPL, are there any compatibility requirements for that recovery? I don't see any of that in that post, but just in case.. =D
thanks again!! =D
DOUBLE KILL! erm... double post!
I'm not the only one cursed with the double posting, huh?
No, no issues with using any combination of recovery with certain ROMs, SPL, radio, etc.
You're welcome, and good luck.
X10 ?Mini Pro
Works like a charm
when you install titanium backup from the market it will download an actual busybox after first start. maybe you can try this one?
you can use Titanium Backup to update it
Hi all,
I have a big problem. I have my old Nexus One that never I root or modify. Today, after more than 1 year of use and reading various root guides I decide root my phone. My phone are updated from Google to 2.3.3 and say that is version GRI40. After finish all process of root the phone boot perfect and run perfect. Later I install also the Recovery-RA to can make backups, etc.
After this the phone not boot any more... Keep frozen at main screen with the big "X" and the padlock at bottom.
I can´t use any more my phone... any ideas or help? I forget one step?
I can boot perfect and run the Recovery(*) mode with Recovery-RA and all these options of this application.
All help are welcome!
THANKS!
(*) Recovery version is: RA-Passion-v2.2.1
Try flashing a new ROM, it sounds like it got corrupted when you installed RA. If you made a backup try restoring it, if not just do a factory reset and flash whatever ROM you pick.
Edit: You might also get more help if you ask in the Nexus forum.
OK, thanks!. I make a nandroid backup, that is the first that I try restore, but this not work. Now I try download any other. You know if exist exactly the same 2.3.3 that I have unmodified on my phone before I install RA? Thanks again!
There might be, just search for "stock ROM" in the nexus forum.
Thanks dbz!, I already use the GRI40_rooted_deodexed_busybox_apps2sd.zip that I found here and run again!!!
One more question: if I like on next update receive the update from Google that automatically update my phone like in the past before root, I can?
If you want to get an update from google you'll have to unroot. Usually when an update is released it isn't too long before a rooted version is released so just be patient.
You don't have to unroot the phone to get and install the OTA's in the future.
But when you apply a stock update you will loose root.
Sent from my Nexus One using XDA App
Hi guys, i've seen that custom roms are in an early state of developement so i'm thinking of rooting my OB just to remove some useless default applications. Now the questions:
If an official update is released by LG (gingerbread hopefully), do i have to unroot the phone before i upgrade it by pc-suite?
if yes, how could i unroot the phone?
Thank you so much!
It was answered many times.
Use Search function...
Sent from my LG-P970 using XDA Premium App
I have a noob question guys. I root my phone and delete some default apps like Car Home, News, Finance. Now Car Home, News etc is deleted it is possible to UNROOT my phone? Do you think if i UNROOT my phone it can cause a problem/bug? I try to restore some of my default apps using titanium backup but after 30 mins of waiting nothing happens. Still i can't restore it.
of course you can't restore stock apps if you have deleted sources apk without backups. So you must find stock apps, copy them to /system/app (root needed) then installing them
Ilko said:
of course you can't restore stock apps if you have deleted sources apk without backups. So you must find stock apps, copy them to /system/apps (root needed) then installing them
Click to expand...
Click to collapse
I do backup before i delete the apps using titanium backup, But the problem is when i try to restore the stock/default apps after 30 mins nothing happens. I check my sd card in titanium folder and the backup is still there. I also try to delete some apps that can be found in the market like angrybird etc then i try to restore it and it works! So I'm just wondering, when it comes to stock/default apps why l can't restore them even though i have a backup.
Sent from my LG-P970 using XDA App
you may haven't write permission. Are you fully rooted ?
The original question from gabrieles84 is still valid in my opinion. As radkor indicated I searched the forum, but there are many methods and can't find a conclusive answer.
I was wondering the same thing. There are a number of methods of upgrading the firmware. Which is safe with a rooted phone?
1. FOTA (from settings menu): in this thread (http://forum.xda-developers.com/showthread.php?t=1204903&highlight=unroot+before+upgrade) it is indicated the root was the cause of the bricking. So it is safe to update this way with a rooted phone? Or is this dependant on the firmware and recovery? (my firmware is V10A no CWM)
2. LGMobileupdater (B2C). Is this safe with rooted phone? In my case it tells me there is a new firmware, but I'm not sure if it is safe to upgrade since I rooted with SOC 1.95, unrooting is not that simple in that case.
This will not work in this case, factory reset does not unroot, http://forum.xda-developers.com/showpost.php?p=16519995&postcount=19
3. KDZ. This post indicates it is not nessecary to unroot: http://forum.xda-developers.com/showpost.php?p=16522163&postcount=23
(I'm not mentioning the R&D Test Tool in this list, since that is only needed in case of a brick right?)
Thanks in advance!
1. FOTA - isn't safe with root - I bricked my phone with that
2. Safe
3. Safe
R&D Test Tool method is the same that KDZU but with a final factory reset.
Then, it's the way to flash devices that doesn't run well after reflash because of data inside the phone in conflict with new flash.
But, IMHO, I¡ll recommend ALLWAYS use R&D Test Tool method instead KDZU because IT'S THE SAME but additionally makes a hard reset, that is what usually we have to make after a KDZU reflash.
Regards.
Just to confirm: yesterday evening I updated my phone with LGUpdater (B2C) from V10A to V10E without removing root. No problems and now running newest fw.
Thanks guys!
How to install a custom rom (eg. CM9, Ice Cream Sandwich, Liberty, Maverick, SteelDroid) to a Bell XT860 without losing the ability to revert to stock later.
Why this guide?
I noticed over time that my phone has become slower and more frustrating to use. For example, long pauses when trying to open a program - sometimes it takes an easy 10 or more seconds to open the dialer and dial a number.
I wanted to try a custom rom, but was concerned about the ability to get back to stock, if something goes wrong, or to be able to take advantage of a Bell update if they release a new one. Thanks to the hard work of many on this board, I have discovered how to make this possible and wanted to share with others.
Big thanks to DoomLord, HashCode, Enderoid, Rick#2, Dasilva333, Willis111 and others. Please feel free to make corrections to these instructions.
Note: This has been tested with an XT860 on Bell 2.3.6 firmware. This will probably NOT work on v2.3.4 So if you have 2.3.4, upgrade to 2.3.6 and then these instructions should work. When I first got the phone, it was at 2.3.5 and later was updated OTA (Over the air) by Bell to 2.3.6. To check which firmware you have, Home Screen / Settings / About Phone
Needed:
1. Windows pc (someone else more knowledgeable could probably tell you how to make this work on a Mac)
2. USB cable for connecting your phone.
3. Rooting tool, I highly recommend zergRush method by DoomLord found here:
http://forum.xda-developers.com/showthread.php?t=1321582
4. Safestrap by hashcode
http://hash-of-codes.blogspot.com/p/android-downloads.html
5. Custom rom of your choice.
Step 1:
Root your phone using the DoomLord tool. I used version 3. It was really easy, just follow the instructions on the link above.
Step 2:
Backup existing user programs that you might want to restore on a new system. I used Titanium Backup Pro but there are others.
Step 3:
Please read this page carefully
http://hash-of-codes.blogspot.com/p/how-to-safestrap.html to download and install safestrap v1.08. Note, you should remove any other type of bootstrap (eg. ClockworkMod, ROM Manager) before installing Safestrap.
Step 4:
Now you should be ready to download and try a custom rom. Make sure to do a backup (“Nandroid” backup) of your working system before you try a custom rom so you have something to fall back on in case something goes wrong or you want to return to stock.
Find a rom, download it and save it to a location on your sdcard or ext-sdcard. There’s lots of good candidates for you to test and a good thread with some reviews here:
http://forum.xda-developers.com/showthread.php?t=1384676
To do this, power down your phone after you have run safestrap and clicked to make recovery active. If you did it right, when you turn it on again, you should see a different splash screen that gives you a few seconds to enter the recovery menu by pressing the “menu” button on you device.
You should see “Safestrap Recovery v1.08” and below that “Safe System is: DISABLED”
on a black screen with some green menu choices.
Use the volume keys to scroll up/down and select “backup and restore” by pressing the power button.
The screen should change to show the Nandroid backup menu. You need to make a Nandroid backup of your existing (working) system, which is simply a snapshot of the exact system with all programs, settings, sms’s, call logs, etc. It’s like a snapshot in time in case you need to revert. Select “backup”, then select Internal or External SD Card for the location (I’m not sure it it matters for the location).
Safestrap will backup your system to a Nandroid backup. It takes a few minutes.
After the backup is complete, you can enable the Safe System where you will install custom roms. Scroll down and select “safe boot menu”, then “Toggle Safe System”, then on the next screen confirm your selection. It will backup the original system to a safe area where it can’t be modified (unless you are an advanced user and install a different version of Safestrap but that’s beyond the scope of these instructions).
After Safe System is: ENABLED, scroll down to “Install zip from sdcard”, select your rom, install, reboot and enjoy.
To revert back to your original system, follow these steps:
1. Turn off your phone and reboot into SafeStrap recovery menu.
2. Turn off SafeSystem. (Safe boot menu -> Toggle Safe System)
3. Restore your nandroid backup and reboot.
If you wanted to go further back to stock you could uninstall Safestrap and even unroot using DoomLord’s zergRush tool, which would put you back to stock.
I think that’s it. Hopefully this guide will be helpful to others who want to try a new rom without losing the ability to revert back to stock Bell.
ncho2233 said:
How to install a custom rom (eg. CM9, Ice Cream Sandwich, Liberty, Maverick, SteelDroid) to a Bell XT860 without losing the ability to revert to stock later.
Why this guide?
I noticed over time that my phone has become slower and more frustrating to use. For example, long pauses when trying to open a program - sometimes it takes an easy 10 or more seconds to open the dialer and dial a number.
I wanted to try a custom rom, but was concerned about the ability to get back to stock, if something goes wrong, or to be able to take advantage of a Bell update if they release a new one. Thanks to the hard work of many on this board, I have discovered how to make this possible and wanted to share with others.
Big thanks to DoomLord, HashCode, Enderoid, Rick#2, Dasilva333, Willis111 and others. Please feel free to make corrections to these instructions.
Note: This has been tested with an XT860 on Bell 2.3.6 firmware. This will probably NOT work on v2.3.4 So if you have 2.3.4, upgrade to 2.3.6 and then these instructions should work. When I first got the phone, it was at 2.3.5 and later was updated OTA (Over the air) by Bell to 2.3.6. To check which firmware you have, Home Screen / Settings / About Phone
Needed:
1. Windows pc (someone else more knowledgeable could probably tell you how to make this work on a Mac)
2. USB cable for connecting your phone.
3. Rooting tool, I highly recommend zergRush method by DoomLord found here:
http://forum.xda-developers.com/showthread.php?t=1321582
4. Safestrap by hashcode
http://hash-of-codes.blogspot.com/p/android-downloads.html
5. Custom rom of your choice.
Step 1:
Root your phone using the DoomLord tool. I used version 3. It was really easy, just follow the instructions on the link above.
Step 2:
Backup existing user programs that you might want to restore on a new system. I used Titanium Backup Pro but there are others.
Step 3:
Please read this page carefully
http://hash-of-codes.blogspot.com/p/how-to-safestrap.html to download and install safestrap v1.08. Note, you should remove any other type of bootstrap (eg. ClockworkMod, ROM Manager) before installing Safestrap.
Step 4:
Now you should be ready to download and try a custom rom. Make sure to do a backup (“Nandroid” backup) of your working system before you try a custom rom so you have something to fall back on in case something goes wrong or you want to return to stock.
Find a rom, download it and save it to a location on your sdcard or ext-sdcard. There’s lots of good candidates for you to test and a good thread with some reviews here:
http://forum.xda-developers.com/showthread.php?t=1384676
To do this, power down your phone after you have run safestrap and clicked to make recovery active. If you did it right, when you turn it on again, you should see a different splash screen that gives you a few seconds to enter the recovery menu by pressing the “menu” button on you device.
You should see “Safestrap Recovery v1.08” and below that “Safe System is: DISABLED”
on a black screen with some green menu choices.
Use the volume keys to scroll up/down and select “backup and restore” by pressing the power button.
The screen should change to show the Nandroid backup menu. You need to make a Nandroid backup of your existing (working) system, which is simply a snapshot of the exact system with all programs, settings, sms’s, call logs, etc. It’s like a snapshot in time in case you need to revert. Select “backup”, then select Internal or External SD Card for the location (I’m not sure it it matters for the location).
Safestrap will backup your system to a Nandroid backup. It takes a few minutes.
After the backup is complete, you can enable the Safe System where you will install custom roms. Scroll down and select “safe boot menu”, then “Toggle Safe System”, then on the next screen confirm your selection. It will backup the original system to a safe area where it can’t be modified (unless you are an advanced user and install a different version of Safestrap but that’s beyond the scope of these instructions).
After Safe System is: ENABLED, scroll down to “Install zip from sdcard”, select your rom, install, reboot and enjoy.
To revert back to your original system, follow these steps:
1. Turn off your phone and reboot into SafeStrap recovery menu.
2. Turn off SafeSystem. (Safe boot menu -> Toggle Safe System)
3. Restore your nandroid backup and reboot.
If you wanted to go further back to stock you could uninstall Safestrap and even unroot using DoomLord’s zergRush tool, which would put you back to stock.
I think that’s it. Hopefully this guide will be helpful to others who want to try a new rom without losing the ability to revert back to stock Bell.
Click to expand...
Click to collapse
Good writeup. As a note when your switch back to nonsafe you don't need to restore a nandroid. Actually with safestrap you should rarely have to restore a nandroid as its next to impossible to screw up your device so bad that a restore is required. The stock bell /system stays nice and untouched
Sent from my XT860 using xda premium
Dont you just root, install safestrap and flash paritions to preinstall from stock(to avoid not being able to return to true stock) and not flash the og /system? Obviously works on 2.3.4, 2.3.6 etc any rootable rom capable of running safestrap. You should be able to even use my rom to return to stock deodexed by flashing to /system(non-safe) and removing any custom recovery. It should be very easy to convert that or the og dumps into a system.img for use with rsdlite and even the rest of the stock img files. I'll take a look at it this aft. Thanks for the write up, hope some of this info helps.
Maybe this is the wrong place to ask, but XT860 threads are few and far between in this droid 3 section. But I've got a few questions about this method.
First off, how safe is this from start to finish? I'm by no means new at the whole installing custom roms thing, but there have most definitely been times on all three of the devices I've installed roms on (Nook Color, Milestone, Transformer) where I've gotten a non-booting device that was fixed either because it was so easy to just go into CWM or RSDlite and flash a new rom or revert to stock. Doing anything (I'm not even rooted yet) on my XT860 kind of scares me, because we don't have an sbf or anything. This method seems like its the closest thing we've got, but new things are scary.
Secondly, I read somewhere that ICS uses a different kernel than GB. Would this method be able to deal with that or are we boned (i.e. stuck with the GB kernel and hackarounds) until Moto randomly decides to unlock the bootloader and we can rewrite everything?
And lastly, we can root on bell now? Last time I'd looked into it, I seem to remember flashing firmware from another country and without an easy way to get back to stock, that kind of killed it for me.
Once again, sorry that some of this is kind of off topic, its just kind of hard to know where to read while we're piggybacking on the droid 3 forum.
Tyfighter said:
Maybe this is the wrong place to ask, but XT860 threads are few and far between in this droid 3 section. But I've got a few questions about this method.
First off, how safe is this from start to finish? I'm by no means new at the whole installing custom roms thing, but there have most definitely been times on all three of the devices I've installed roms on (Nook Color, Milestone, Transformer) where I've gotten a non-booting device that was fixed either because it was so easy to just go into CWM or RSDlite and flash a new rom or revert to stock. Doing anything (I'm not even rooted yet) on my XT860 kind of scares me, because we don't have an sbf or anything. This method seems like its the closest thing we've got, but new things are scary.
Secondly, I read somewhere that ICS uses a different kernel than GB. Would this method be able to deal with that or are we boned (i.e. stuck with the GB kernel and hackarounds) until Moto randomly decides to unlock the bootloader and we can rewrite everything?
And lastly, we can root on bell now? Last time I'd looked into it, I seem to remember flashing firmware from another country and without an easy way to get back to stock, that kind of killed it for me.
Once again, sorry that some of this is kind of off topic, its just kind of hard to know where to read while we're piggybacking on the droid 3 forum.
Click to expand...
Click to collapse
Yes we can root, there is no need to flash any other countries fastboot files as long as you are on bell 2.3.6. While bell doesn't have a fastboot package yet(sbf) if you borked your device you can use motofastboot to flash just /system from the fastboot package of another country, and then restore a backup, thus everything stays bell stock.
The best advice is to use safestrap and only flash the safemode. You should always be able to get into CWR with safestrap
And yes we are stuck with the GB kernel for now, which is part of the reason developing ics roms has been so painful
Sent from my XT860 using xda premium
This process does not work for me...
When I load SafeStrap 1.08, I get Recovery State: Not Installed
I try and click the "Install Recovery" button and it goes through a process (preparing something, obtaining root, etc) but the Recovery State never changes
I have an XT860 from Bell (2.3.6) that is running on Rogers (unlocked).
Root works fine for TiBu and Root Explorer....The SuperUser entry for SafeStrap lists allowed and logs a whole bunch of "granted".
Any thoughts?
Caz666 said:
This process does not work for me...
When I load SafeStrap 1.08, I get Recovery State: Not Installed
I try and click the "Install Recovery" button and it goes through a process (preparing something, obtaining root, etc) but the Recovery State never changes
I have an XT860 from Bell (2.3.6) that is running on Rogers (unlocked).
Root works fine for TiBu and Root Explorer....The SuperUser entry for SafeStrap lists allowed and logs a whole bunch of "granted".
Any thoughts?
Click to expand...
Click to collapse
Perhaps you don't have su binary properly installed. I've had this happen with bootstrap. Check that you have su in both /system/bin and /system/xbin
Sent from my XT860 using xda premium
Close...it was busybox. It was present, but borked. Nuked and reloaded..problem fixed.
Many thanks to hashcode for the pointer to busybox being most likely.
Sent from my XT860 using xda premium
Caz666 said:
Close...it was busybox. It was present, but borked. Nuked and reloaded..problem fixed.
Many thanks to hashcode for the pointer to busybox being most likely.
Sent from my XT860 using xda premium
Click to expand...
Click to collapse
Now that you say that I remember someone else having the same issue and it turned out to be busybox. I had nearly the same problem with the bootstrap and it ended up being su missing from xbin
Sent from my XT860 using xda premium
OK I tried this and it works perfectly. Thanks man. This is what I needed.
Finally got around to trying this. I'd been in the middle of a move with my pc in a box, but now I've got ICS fully up and running (save for the whole camera thing). Panicked halfway through when I got into a bootloop, but then I wiped everything (forgot the cache the first time) and then everything worked.
I got wifi tether working with the app that was included in the rom, but have any of you had any luck with doing it natively through the settings? I only ask because being able to trigger it from the status bar would be pretty sweet.
edit: did some looking around and it looks like maybe its an issue with shoehorning GSM into a CDMA rom. At least that's the feel I've been getting, I'd love to be wrong.
Thanks for this thread! I hadn't realized there had been developments for the XT-860.
I had unlocked (for use on the Fido network)/rooted my phone and it was working great, then the OTA update from Bell came and I installed that. Now, I seem to have lost root privileges (I guess, obviously).
So, I guess I'm pretty much back to square one.
I would love some advice on how to proceed! I'm thinking of following your directions, and am interested in recommendations for which ROM to install.
What is the problem with the camera with ICS? I use the camera on our phone pretty often so I want a ROM that doesn't break it. Does anyone have some links to some good ROMs to try that work with the XT-860?
twitchcity said:
Thanks for this thread! I hadn't realized there had been developments for the XT-860.
I had unlocked (for use on the Fido network)/rooted my phone and it was working great, then the OTA update from Bell came and I installed that. Now, I seem to have lost root privileges (I guess, obviously).
So, I guess I'm pretty much back to square one.
I would love some advice on how to proceed! I'm thinking of following your directions, and am interested in recommendations for which ROM to install.
What is the problem with the camera with ICS? I use the camera on our phone pretty often so I want a ROM that doesn't break it. Does anyone have some links to some good ROMs to try that work with the XT-860?
Click to expand...
Click to collapse
Use zergrush to root 2.3.6. Picture camera works in ics but you can't record or view video. There's some good gb roms. Give me a few and il shoot you some links
Sent from my XT860 using xda premium
Starting the process now. Can someone please send me a link or two to a good ROM for the XT-860?
I would prefer ICS (I want Chrome on my phone), but if that causes to many problems, a GB recommendation would be fine.
Bell SBF available at the following URL:
http://sbf.droid-developers.org/umts_solana/list.php
ncho2233 said:
How to install a custom rom (eg. CM9, Ice Cream Sandwich, Liberty, Maverick, SteelDroid) to a Bell XT860 without losing the ability to revert to stock later.
Click to expand...
Click to collapse
If there was any interest at all I would have just made a 100% stock bell 2.3.6 that you flash with CWM and then remove the recovery to be 100% stock but the deodex version seems to be good enough, especially to get a phone with a physical problem past bell/motorola reps. I'm downloading and mirroring that bell sbf right now, very nice find pfak! I made a new thread since you didn't but just linked to your post.
twitchcity said:
Starting the process now. Can someone please send me a link or two to a good ROM for the XT-860?
I would prefer ICS (I want Chrome on my phone), but if that causes to many problems, a GB recommendation would be fine.
Click to expand...
Click to collapse
There are many roms on this part of the sub-forum, just look around or try a search with [ROM] as your query (might not work so hot in the d3 dev subforum )
I
twitchcity said:
Starting the process now. Can someone please send me a link or two to a good ROM for the XT-860?
I would prefer ICS (I want Chrome on my phone), but if that causes to many problems, a GB recommendation would be fine.
Click to expand...
Click to collapse
Willis111 said:
If there was any interest at all I would have just made a 100% stock bell 2.3.6 that you flash with CWM and then remove the recovery to be 100% stock but the deodex version seems to be good enough, especially to get a phone with a physical problem past bell/motorola reps. I'm downloading and mirroring that bell sbf right now, very nice find pfak! I made a new thread since you didn't but just linked to your post.
There are many roms on this part of the sub-forum, just look around or try a search with [ROM] as your query (might not work so hot in the d3 dev subforum )
I
Click to expand...
Click to collapse
I have a number of xt860 adapted roms on my computer. Give me a few days to contact the devs and such and I'll see if I can get a stickied thread with xt860 ready roms to make it easy for new comers. Also willis, ignore my other post to you, I'll include that info in aforementioned thread if I can get it going
Sent from my GT-P5113 using xda premium
Endoroid said:
I have a number of xt860 adapted roms on my computer. Give me a few days to contact the devs and such and I'll see if I can get a stickied thread with xt860 ready roms to make it easy for new comers. Also willis, ignore my other post to you, I'll include that info in aforementioned thread if I can get it going
Sent from my GT-P5113 using xda premium
Click to expand...
Click to collapse
You can just use one of the patches (small xt860 patches) to get any rom working on our phones as far as I know.
pfak said:
Bell SBF available at the following URL:
http://sbf.droid-developers.org/umts_solana/list.php
Click to expand...
Click to collapse
thank you for this it will help a ton of peeps