Hello
I currently have a nexus one flashed with CM 6 RC2. I would like to get the new korean radio and flash with the new CM RC3 rom or with LimeMOD R4. I am not sure which one is better I am quite new to this. I would like to have the 720p video function and would like to not have ADW launcher built in. Could you please tell me which one to get. Also if there is any way to be able to change the trackball color for incoming calls i would like to know how to do that.
Thanks
I am new to this could you please give me a step by step explanation on how to flash the new firmware, google apps and radio.
Thanks
To make things easy and since you're already running CM6 RC2, I would open up ROM Manager and simply download CM6 RC3. CM6 RC3 comes with 720p and is much easier to do rather than flash a new radio and then flash CM6 or the other ROM that you stated.
If you don't have ROM Manager, go install it from the Market. Click Download ROM>CyanogenMod>CyanogenMod 6.0.0-RC3
Simple as that =).
sheanzyy said:
To make things easy and since you're already running CM6 RC2, I would open up ROM Manager and simply download CM6 RC3. CM6 RC3 comes with 720p and is much easier to do rather than flash a new radio and then flash CM6 or the other ROM that you stated.
If you don't have ROM Manager, go install it from the Market. Click Download ROM>CyanogenMod>CyanogenMod 6.0.0-RC3
Simple as that =).
Click to expand...
Click to collapse
Thank you very much! I would like to get the Korean radio though because i here it is much better than the one that comes with RC3. Do you know how to get it?
njiwani said:
Thank you very much! I would like to get the Korean radio though because i here it is much better than the one that comes with RC3. Do you know how to get it?
Click to expand...
Click to collapse
To be completely honest, I get amazing speeds with RC3 and WildMonks Kernel, so for me to flash a radio isn't necessary. A lot of the speeds posted about the Korean radio are from domains that aren't completely accurate, so make sure you do your research first.
There is no doubt an increase in speed, but like I said, RC3 with WildMonks Kernel gives me phenomenal amount of speed.
Okay that sounds good. Does the kernel come with RC3 or is that something seperate? I am not really sure what the kernel is..
The kernel that comes with RC3 is good enough. I shot 720p @22 FPS and when I flashed WildMonks Kernel, I shot 720p @24 FPS.
I see what your saying. I was wondering if there is an ADW launcher in the RC3 and if there is a way to change the color of the trackball for incoming calls.
Yes ADW Launcher comes stock with it and yes there are trackball color notifications for your dialer.
So where do i change those notifications? Also currently when using RC2 I am having some issues with Launcher Pro and I do prefer that over the ADW Launcher. SOmetimes when I open the app drawer it gets glitchy and some of the app dont show up. Also a lot of the time launcher pro has to do a force close. Do you know if that it fixed in the RC3?
I use Launcher Pro and I haven't had any issues with lag or FC's with RC3. For the LED notifications you simply go to Settings>CyanogenMod Settings>User Interface>LED Notifications> Dialer .
Update to RC3. It's a big improvement from RC2 and plus, you get 720p
and RC3 doesn't include a radio it keeps your existing, so if you want to flash the korean radio, there shouldn't be any problems (im using it on mine as we speak)
y2whisper said:
and RC3 doesn't include a radio it keeps your existing, so if you want to flash the korean radio, there shouldn't be any problems (im using it on mine as we speak)
Click to expand...
Click to collapse
How exactly do i flash the korean radio? Like a step by step please because I am very new to this.
Thanks
njiwani said:
How exactly do i flash the korean radio? Like a step by step please because I am very new to this.
Thanks
Click to expand...
Click to collapse
Make sure you do a nandroid backup first... that is very important!!
This is how I did it...
1. Downloaded the radio update from http://forum.xda-developers.com/showthread.php?t=723839
2. Copied the update to the root of my SD card
3. Rebooted phone and help the power button and the VOL down button to enter the fastboot/recovery mode
4. Use the VOL down key to select "recovery"
5. Phone reboots into recovery mode (I am using Amon Ra's 1.7.0.1)
6. I selected the option "flash .zip from SDcard"
7. It gave me a selection of the .zip files I had on the root on the SD
8. I selected the file that I downloaded in step 1
9. I applied the update and then the phone rebooted
10. Phone came back in recovery mode (I believe it wiped the cache)
11. Once the cache was wiped (it was automatic) I just rebooted the phone and started using like normal
Let me know if you want some screenshots or if I didn't explain something right. That is pretty much exactly what I did... step by step. Hope that helps.
njiwani said:
So where do i change those notifications? Also currently when using RC2 I am having some issues with Launcher Pro and I do prefer that over the ADW Launcher. SOmetimes when I open the app drawer it gets glitchy and some of the app dont show up. Also a lot of the time launcher pro has to do a force close. Do you know if that it fixed in the RC3?
Click to expand...
Click to collapse
Its a problem with Cyanogen and the launcher rotations, go into the launcher settings and disable auto rotation and all the FC's go away.Im not sure if this was fixed in RC3, but that was the problem in Rc2
Thank you very much! I will try this out and let you know. Also would it be better to do this before or after i install RC3? Or does it not matter.
Thanks
shouldnt matter
Blueman101 said:
shouldnt matter
Click to expand...
Click to collapse
I just flashed the korean radio...thank you for your help! It seems to be working fine..took a little while to boot up but other than that its good. Now if i flash with Rc3 it will keep the korean radio right?
njiwani said:
I just flashed the korean radio...thank you for your help! It seems to be working fine..took a little while to boot up but other than that its good. Now if i flash with Rc3 it will keep the korean radio right?
Click to expand...
Click to collapse
yes, the radio is something totally separate from the rom, which is why it is so important not to mess up a radio update, you can brick your phone if a radio update goes south, not even a nandroid can fix that. But yup your radio is stuck at 5.08 until you flash over it with a newer/older radio image.
Thank you very much! It its all done now
Sent from my Nexus One using XDA App
Actually there was one more thing. When I set the dialer led color to be red it stilshows up as white when the call comes in
Sent from my Nexus One using XDA App
Related
Hello Im messing with my girlfriends phone and was wondering what kernel I should use?
So far I have tried 710LegendKernel-signed.zip and 768FreshToast-signed.zip. The 710 legend kernel is the only one that worked. But upon recently she has been having force closes when receiving a call and restarting the phone.
What is your recommendation
also can someone give me a link to the stock kernel so I dont have to nandroid back to it, for future reference?
Stock kernel attached (from Fresh 2.1.2)
And 710 kernel with Stock Ramdisk attached(for overclock) ((NO RAMSWAPZ, COMPCACHE, ETC))
twiggy2cents said:
Hello Im messing with my girlfriends phone and was wondering what kernel I should use?
So far I have tried 710LegendKernel-signed.zip and 768FreshToast-signed.zip. The 710 legend kernel is the only one that worked. But upon recently she has been having force closes when receiving a call and restarting the phone.
What is your recommendation
Click to expand...
Click to collapse
They're all utilizing Toast's Godm0de kernel.
Her phone may not be able to boot to 768*
Regardless, the 710LegendKernel is for phones that utilize/need for optimization the Legend ramdisk. (Darchlegend)
So yeah, tell me if those zips work for you
*some phones just can't
okay I am testing this soon, but i wanted to add that with that kernel I was down to ~650 MHz and it was still doing it, but it sounds like it wasnt a overclock issue maybe?
alright the 710 stock ramdisk didnt start up, it just froze at the htc screen and never booted, twice.
does this clear the dalvik cache? Its looking like the stock signed kernel doesnt work either(freezes like the last one)
okay one other option. What would be a good ROM with sense? The only way she would let me do this is if I restore all of her apps and also her settings. Whats my options. I'm guessing use astro for the apps and then just write down her ringtone and sms/mms tones? What other pertinent data should I record
twiggy2cents said:
okay one other option. What would be a good ROM with sense? The only way she would let me do this is if I restore all of her apps and also her settings. Whats my options. I'm guessing use astro for the apps and then just write down her ringtone and sms/mms tones? What other pertinent data should I record
Click to expand...
Click to collapse
I'd help more but I'm poolside enjoying a corona. BTW, if you're looking for sense with oc just download/flash freshtoast.
I'm not quite sure why those zips didn't work for you though.
twiggy2cents said:
okay one other option. What would be a good ROM with sense? The only way she would let me do this is if I restore all of her apps and also her settings. Whats my options. I'm guessing use astro for the apps and then just write down her ringtone and sms/mms tones? What other pertinent data should I record
Click to expand...
Click to collapse
Ever since i found these forums I have been a complete ROM flashing junkie. I have tried pretty much all the ROMS available and have had the most luck with dc 2.08.1 with the damage710 oc kernel. Its stable with no lag, for me at least, which is why I keep coming back.
I use Titanium Backup because it will not only back up the app itself but the app's data and market link (so it will still notify you of any updates available).
Thread moved to Q&A.
Hey I flashed the latest stable fresh ROM and then flashed the 710 Stock Ramdisk and its working. Is this a good combo? I was working with limited battery on my net book while looking so I just tried this.
twiggy2cents said:
Hey I flashed the latest stable fresh ROM and then flashed the 710 Stock Ramdisk and its working. Is this a good combo? I was working with limited battery on my net book while looking so I just tried this.
Click to expand...
Click to collapse
Perfect combo, since it's the ramdisk from fresh 2.1.2(which is the stock) which you are using.
Good to hear things worked out.
also I noticed that its a lot smoother when everything is working right. It is a lot better than when I was using the legend 710 kernel
So she is still having the problem with a force close when unlocking the phone to answer the phone(she has the sense lock screen). It doesnt go to the call screen, just the normal htc lock screen. This is with fresh rom with a 710mhz kernel and stock ramdisk. The latest one. Any ideas?
-------------------------------------
Sent via the XDA Tapatalk App
Also it is running at 710mhz high and low on set cpu with no profiles
-------------------------------------
Sent via the XDA Tapatalk App
twiggy2cents said:
So she is still having the problem with a force close when unlocking the phone to answer the phone(she has the sense lock screen). It doesnt go to the call screen, just the normal htc lock screen. This is with fresh rom with a 710mhz kernel and stock ramdisk. The latest one. Any ideas?
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
Get a logcat, i'll look at it.
Code:
adb logcat > logcat.txt
Recreate the problem with the fc,
and upload/paste it to pastebin.
hmm I will try, I read through a bunch of pages(starting at 56 ) on the fresh toast and it seems to be a known problem. But I will try to get a logcat, the problem is is that its so random. Does the logcat have to be running at the time or can I do it after the force close comes up
I know Im grouping all my questions into one thread but can you answer one more thing for me? Her HTC weather has very limited locations and the htc clock/weather widget doesnt update for the weather. Do I need an updated .apk?
GOTIT! Here is the log cat link
http://pastebin.com/N8gN8D0t
I havent actually seen the Cyanogen Rom/Vibrant thread so I figured Id start one. So after my buddy put it on his captivate, I figured I would take the plunge and I would try it on the Vibrant. I was running Obsidian v5 and ported right from that. I take no credit for this, aside from doing it, Give the devs the credit, there the one keeping the community going.
GOES WITHOUT SAYING I AM NOT RESPONSIBLE FOR YOUR PHONE! FLASH AT YOUR OWN RISK
Steps for Flashing
Source:Cyanogen i9000 forum
1. Make sure your phone is fully charged! Update process will take some time.
2. Make sure that you've not applied any lagfix to your phone. Otherwise remove it!
3. Make sure you're actually on JPM Firmware or newer. If not, flash and boot into it. We need this Modem Firmware!
4. Download initial Kernel (Link).
5. Download CyanogenMod Beta3 (Link) and copy it onto your internal sdcard. Don't extract!
6. Optional: Download Google Addon (Direct DL Link) and copy it onto your internal sdcard.
7. Make sure you have more than 500 MB free space on internal sdcard.
8. Flash initial kernel "CM-GalaxyS-Kernel-initial.tar" as PDA via odin (no pit, no repartition).
9. Reboot into Recovery
10. Do a Nandroid Backup. Choose "Backup and Restore", then "Backup". It's very important!
11. Go back and do a factory reset / data wipe. It's really necessary otherwise your phone won't boot.
12. Choose "install zip from sdcard" -> "choose zip from sdcard", choose CyanogenMod and apply it! This will take some time!
13. After this your phone should boot. Don't touch it for a few minutes (4-5), it has a lot to do.
14. OPTIONAL: Enable Wifi, reboot to recovery and flash Google Addon (choose "install zip from sdcard" -> "choose zip from sdcard" -> "gappsXXX"). Reboot!
15. Setting up your google account can take some minutes. After this you should enable Wifi immediately!
Click to expand...
Click to collapse
Addons
BRAND NEW JK6 modem (for da speedz)
Thanks to scrizz, he was nice enought to pull out the JK6 modem from the latest released samsung code and I just flashed it and am getting WAY faster network speeds. You can get it from his thread here. Just flash thru CWM and reboot. Let it sit a few minutes and reboot again just to be safe. (I noticed weird hangups and after the second boot it was better)
Eugene Kernel 13 CWM (OC/UV tweaked)
~ Scaling tweaks
~ Battery Drain Tweaks
~ OC / UV
~ 1.12GHz OC
~ 100MHz to 400MHZ voltage drop is -50 / 800 to 1.12 is -25
~ To get more Battery Life, Disable 3G when not using Data! 2G works Fine regarding battery life.
~ Kernel Panic's Fixed
~ Wake issue's Fixed
~ OC App's Now work Fine without issue ( SetCPU / OC Widget )
Direct Download > Here
Click to expand...
Click to collapse
Installed it last night and Initial thoughts... AWESOME. Granted yes this is still very beta and buggy. Other than that, flash went smooth and have only noticed a few things.
Noticed Issues
Cyanogen Issue Tracker
1. Haptic feedback doesnt work outa the box
2. Installed better kb for kb haptic feedback, but the 4 btns on the bottom still dont have it.
3. Fixed with Eugenes Beta3 kernel You have to install the toggle headset widget and set it at every boot
4. Fixed with Eugenes Beta3 kernel Seems the Home and Back buttons act the same sometimes. (Hit home and it goes back)
5. Havent heard 1 issue about this on the vibrant My buddy on the captivate noticed on his that every call the hearing got worse for the person on the other side, and the other person had a hard time understanding him
6. Disreguard Angry Birds and a select few other apps causes an acore FC, followed by a "stopped unexpectedly" FC
7. Camera display is B/W but it does take color pics
8. Fixed WirelessAP doesnt work (fixed per codeworkx twitter) Use wifi Tether pre_15
Click to expand...
Click to collapse
Battery Test
After a fresh Cyan install, and the JK6 modem, I wiped the battery stats and let it go overnight with minor texting(in 3g and HSDPA)
13hours 31min and it died
Click to expand...
Click to collapse
COOL feature, Somehow, the apps I had installed before were pushed from Obsidian v5 and now to Cyanogen. I didn't reinstall them but they are still there. lol
Other than that all the gApps work, texting, fbook, phone (except for the talking issue I mentioned earlier which I havent tested on the vibrant yet), tweetdeck
VERY smooth and I think ill be on it from here on out.
Enjoy.
GIVE THE dev teams the credit they deserve. I just flashed the rom, they did the work. They get the credit.
Developers:
cyanogen - http://twitter.com/cyanogen
codeworkx - http://twitter.com/codeworkx
dumdidum - http://twitter.com/dumdidum
coolya - http://twitter.com/coolya
finghin - http://twitter.com/finghin
eugene - http://twitter.com/eugene_373
and a lot more!
Cool thanks. Im guessing this is not built off the new jk6 hotness?
Sent from my SGH-T959 using XDA App
mr.orange303 said:
Cool thanks. Im guessing this is not built off the new jk6 hotness?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I dont think so since I was mid-flash when I saw the tweet from samFirmware about the release. lol
mr.orange303 said:
Cool thanks. Im guessing this is not built off the new jk6 hotness?
Click to expand...
Click to collapse
Most certainly not. AFAIK, much of the point of any CM build is that it built from the AOSP source.
mr.orange303 said:
Cool thanks. Im guessing this is not built off the new jk6 hotness?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Just looked, its the jk2
Flashing now... perfect timing too, I just got a new vibrant.
a1cshowoff said:
Flashing now... perfect timing too, I just got a new vibrant.
Click to expand...
Click to collapse
Nice way to break it in!
Wasn't this already posted few weeks back...correct me if I'm wrong but u can't even make phone calls with this rom or something wasnt quite right with phone....i forget
Sent from my SGH-T959 using XDA App
demo23019 said:
Wasn't this already posted few weeks back...correct me if I'm wrong but u can't even make phone calls with this rom
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I havent seen a CM6 thread after searching. I might be wrong but I made sure to look. If its a dupe sry :/
I was able to make calls right after I flashed, worked fine, you just have to make sure you have the Toggle headset enabled so it doesnt think theres a headset in there.
Yea I wasn't sure I never tested it just read something but couldn't remember but yea think its what you mentioned
Sent from my SGH-T959 using XDA App
how to enable toggle headset
yungballla6 said:
how to enable toggle headset
Click to expand...
Click to collapse
install the widget, long press on the home screen, add the widget, and click it and notice the headset icon in the upper notification tray go away
its a duplicate but nice fine all the same eugene posted a week or so ago its on his site as well. i heard its fast and has just under 3000 quadrant and 15ish linpack as is
so did you install a vibrant kernal after you got this up and running?
hotadef said:
its a duplicate but nice fine all the same eugene posted a week or so ago its on his site as well. i heard its fast and has just under 3000 quadrant and 15ish linpack as is
Click to expand...
Click to collapse
Just ran Quadrant = 2025
Linpack = 14.2
So not that fast. but come an official release I dont doubt that at all itll come close.
vortec87 said:
so did you install a vibrant kernal after you got this up and running?
Click to expand...
Click to collapse
Nope, odin'd the GalaxyS-Kernel.tar
Did the wipe
Flashed the rom and let it reboot, waited like 5 min,
Went to recovery lashed gapps and rebooted
sorry that guy used jfs overkill lagfix to get that score but 2000 is not bad with no lagfix installed. i wonder how much more performance can they squeeze out of this phone. its plenty fast enough to do anything. but a hobby is a hobby
Umm theres a better version (a vibrant version) put out by eugene. Plus you should flash the stock 2.2 kernel to fix the buttons. Been running cm6 for a week now
Edit. When tring to flash a new kernel on this beta version from the i9000 remove the ext support or flash a kernel with ext2/3/4 support built in.
Sent from my vibrant
blackerwater said:
Umm theres a better version put out by eugene. Plus you should flash the stock 2.2 kernel to fix the buttons. Been running cm6 for a week now
Sent from my vibrant
Click to expand...
Click to collapse
You have the link for eugene's build?
Its on eb-productions.com under vibrant.
Sent from my vibrant
Darky Q&A
It seems that a pinned Q&A for Darky is missing here.
I have been using Darky 8.1 and just recently decided to give 9.3 a try. One of the things I have liked about Darky is that that the version of 2.2.1 on it supports bluetooth voice dial. I have a BlueAnt S4 in my car, and although it does not voice dial 100% perfectly, it's still worth using. (the rest of the 2.2.1 roms I have tried that do not support bluetooth handsfree)
Okay, here is my question: on Darky 8.1, going to Settings - Display - Wallpaper -Lock screen wallpaper - Gallery ... would result in->
Sorry!
The application Settings (process com.android.settings) has stopped unexpectedly. Please try again.
[Force close]
I seem to remember the initial update to 9.0 (or 9.1) listed that this was fixed. I just got 9.3 running last night, and this still results in a force close. Does Darky have a forum to post this kind of thing, where the developers might see it?
swype
Okay, Swype just expired.
"Your trial period has ended. Please upgrade your copy of Swype."
I am on Darky 9.3 extreme captivate edition. Any fix?
Bump
moymike said:
Okay, Swype just expired.
"Your trial period has ended. Please upgrade your copy of Swype."
I am on Darky 9.3 extreme captivate edition. Any fix?
Click to expand...
Click to collapse
Bump
moymike said:
Okay, Swype just expired.
"Your trial period has ended. Please upgrade your copy of Swype."
I am on Darky 9.3 extreme captivate edition. Any fix?
Click to expand...
Click to collapse
Same problem here, also on Darky 9.3 extreme cappy. I've tried reflashing the captivate swype file, restoring a previous back up, and installing the newest beta. No dice on all 3 accounts.
This doesn't seem to be a problem with just Darky though, and poking around the site it doesn't look like it is exclusive to the Captivate either.
Darky's 9.3 phone not receiving calls
Once again I would have posted in Darky thread in android development if I could..
Ever since I have installed Darky's my phone has had problems receiving calls and will often say "simcard removed from phone please reboot". Today I got a new simcard because I thought that may be the problem but I tested and it still doesn't work. My friend rung me and as the call comes through my phone loses service and the call gets cut instantly and slightly later it'll pop up saying simcard removed please reboot phone. Is anyone else having this problem? Maybe it's time to go to Cyanogen Mod..
Did you ever restore data with Titanium Backup after you installed Darky's?
Yup I restored everything that was on my old rom Cognition
That's your problem. I used to have the same problem. Your phone settings is different between the two ROMs. You should typically ONLY restore app data. Not the system data.
Try going into back into TiBu, then find 'Phone' and click on 'Wipe data'. Hopefully that'll make your calls work again. If not, you might need to reflash Darky's.
System data backups really don't work well between different ROMs (and even different versions of the same ROM).
P.S. Nice to meet another NZer btw.
Oh I see, yeah that makes sense, I asked a friend if I should restore everything I backed up and he wasn't sure so I just restored them all anyway. Now I'm not sure if I should reflash Darky's or move to Cyanogen Mod.
I would try the 'Wipe data' thing first before I try any flashing though!
Upgrade from 9.2 to 9.3 help
In the dev thread, it says you should flash a captivate kernal and modem before installing 9.3. I was wondering if anyone could point me in the direction of a guide to flashing modems/kernals.
Just kinda worried cause I have read so much about people bricking their phones when putting the wrong kernal/modem combo together. I noticed on the Darky app it has options already there, so do I have to downlad the kernal seperately, or did it come with the app, or does the app download it from somewhere?
I am afraid that if I flash the modem first, then reboot it won't match the kernal and I will get stuck.
Thanks!
DriftinOutlaw said:
In the dev thread, it says you should flash a captivate kernal and modem before installing 9.3. I was wondering if anyone could point me in the direction of a guide to flashing modems/kernals.
Just kinda worried cause I have read so much about people bricking their phones when putting the wrong kernal/modem combo together. I noticed on the Darky app it has options already there, so do I have to downlad the kernal seperately, or did it come with the app, or does the app download it from somewhere?
I am afraid that if I flash the modem first, then reboot it won't match the kernal and I will get stuck.
Thanks!
Click to expand...
Click to collapse
You can flash a Modem in Recovery just like you Flash a ROM or Kernel. If you happen to Flash a wrong Modem it won't cause any problems other than you won't get Cell Service. I am presently using the New znkp1 modem and it doing Great on my Cappy with 9.3 Darky and SuckerPunch/Voodoo Kernel.
moymike said:
Okay, Swype just expired.
"Your trial period has ended. Please upgrade your copy of Swype."
I am on Darky 9.3 extreme captivate edition. Any fix?
Click to expand...
Click to collapse
Hope u got to downloading the latest fix with Swype
DriftinOutlaw said:
In the dev thread, it says you should flash a captivate kernal and modem before installing 9.3. I was wondering if anyone could point me in the direction of a guide to flashing modems/kernals.
Just kinda worried cause I have read so much about people bricking their phones when putting the wrong kernal/modem combo together. I noticed on the Darky app it has options already there, so do I have to downlad the kernal seperately, or did it come with the app, or does the app download it from somewhere?
I am afraid that if I flash the modem first, then reboot it won't match the kernal and I will get stuck.
Thanks!
Click to expand...
Click to collapse
Yeah.. Use No Kernel/No Modem in DarkyRom Configurator app and do as RonH54 said!
Lockscreen Wallpaper
moymike said:
It seems that a pinned Q&A for Darky is missing here.
I have been using Darky 8.1 and just recently decided to give 9.3 a try. One of the things I have liked about Darky is that that the version of 2.2.1 on it supports bluetooth voice dial. I have a BlueAnt S4 in my car, and although it does not voice dial 100% perfectly, it's still worth using. (the rest of the 2.2.1 roms I have tried that do not support bluetooth handsfree)
Okay, here is my question: on Darky 8.1, going to Settings - Display - Wallpaper -Lock screen wallpaper - Gallery ... would result in->
Sorry!
The application Settings (process com.android.settings) has stopped unexpectedly. Please try again.
[Force close]
I seem to remember the initial update to 9.0 (or 9.1) listed that this was fixed. I just got 9.3 running last night, and this still results in a force close. Does Darky have a forum to post this kind of thing, where the developers might see it?
Click to expand...
Click to collapse
Just letting you know that in the Darky Rom Configurator App, if u enable LockScreen Wallpaper, it would use Samsung Gallery which has a battery draining bug. Hence it is an option in the Darky app before flashing.
If you really want to use it, enable it and then flash. Or I'll just work on disabling that menu option.
DriftinOutlaw said:
In the dev thread, it says you should flash a captivate kernal and modem before installing 9.3. I was wondering if anyone could point me in the direction of a guide to flashing modems/kernals.
Click to expand...
Click to collapse
Don't know if I'm too late on this but...the modem/kernel combo included has been working good for me; no need to change it. Like rickysa2000 said, don't select a modem/kernel using Darky's Configurator when you flash 9.3.
My only SMALL issue has been when going into APPS and sometimes they won't scroll for maybe two/three seconds.
But it's still my favorite ROM so far (though it's only my fourth). Especially impressed with the dev's attitude and willingness to help!!!
[ROM] Darkyy's 10.0 Gingerbread!
I was just in the i9000 forum and Darkyy said he will have a flashable rom on friday!!! I hope we can get this ported for the Cappy.
Edit: looks like beta 3 is already available for the i9000. Got so excited I impulse posted...
Sent from my SAMSUNG-SGH-I897 using XDA App
She is a he. That pic is his girlfriend. But thanks for the info.
Sent from my SGH-I897
Ha ha oops edited
Sent from my SAMSUNG-SGH-I897 using XDA App
i do not think the port will be coming anytime soon. Without source you can not have a captivate kernel. You can flash i9000 but no back button, and screen rotation, head phone jack, etc
MIUI
mcord11758 said:
i do not think the port will be coming anytime soon. Without source you can not have a captivate kernel. You can flash i9000 but no back button, and screen rotation, head phone jack, etc
MIUI
Click to expand...
Click to collapse
If its on i9000 it will be on captivate within a day lol
Hello guys
If you have any questions concerning Fasty II (Not Fasty I), then please shoot.
Dont forget to be patient, but i will try my best to answer ASAP
I was on CM7..fasty is much better than cm7
Have 1 issue.. after flashing fasty imported my vcf file. but contacts does not display any of them. They are getting displayed on my call logs and sms.. Anyone else having the same issue?
Sent from my SAMSUNG-SGH-I897 using XDA App
_____________________________________
Fasty II v2.0
No GPS
Been using FastyII since v1.5 (which was not that long ago). Exceptional ROM; however, I've never been able to get a GPS lock. I read the other posts regarding this issue, but can't find a solution. As a matter of fact, lbstestmode is not be found. What am I missing?
dineshary said:
I was on CM7..fasty is much better than cm7
Have 1 issue.. after flashing fasty imported my vcf file. but contacts does not display any of them. They are getting displayed on my call logs and sms.. Anyone else having the same issue?
Sent from my SAMSUNG-SGH-I897 using XDA App
_____________________________________
Fasty II v2.0
Click to expand...
Click to collapse
Go to contacts, then press menu , choose more then display option . Check mark all then save. Exit, then give it some time and recheck
hero2zero said:
Been using FastyII since v1.5 (which was not that long ago). Exceptional ROM; however, I've never been able to get a GPS lock. I read the other posts regarding this issue, but can't find a solution. As a matter of fact, lbstestmode is not be found. What am I missing?
Click to expand...
Click to collapse
Download gps aid from the market, that might help your case.
Yup.. u r rite.. I messed it up. vcf file imported the contacts to my google account and I was searching them by checking only the phone option.
So the first question goes down as a stupid one
Sent from my SAMSUNG-SGH-I897 using XDA App
_____________________________________
Fasty II v2.0
What happen to the Dev thread? I cant download Fasty 2.
LOSTLOGIC89 said:
Go to contacts, then press menu , choose more then display option . Check mark all then save. Exit, then give it some time and recheck
Download gps aid from the market, that might help your case.
Click to expand...
Click to collapse
No luck. Just tried that along with several other "GPS Fix" apps. For GPS Aids, the XTRA (native mode) fails so I tried using it in "forced mode". Still nothing. Curious why I can't start lbstestmode.
dineshary said:
Yup.. u r rite.. I messed it up. vcf file imported the contacts to my google account and I was searching them by checking only the phone option.
So the first question goes down as a stupid one
Sent from my SAMSUNG-SGH-I897 using XDA App
_____________________________________
Fasty II v2.0
Click to expand...
Click to collapse
I am glad that solved your issue. Asking questions isnt stupid, its a mean to learn
hero2zero said:
No luck. Just tried that along with several other "GPS Fix" apps. For GPS Aids, the XTRA (native mode) fails so I tried using it in "forced mode". Still nothing. Curious why I can't start lbstestmode.
Click to expand...
Click to collapse
Hmm you might have a captivate with a really bad gps .(hardware)
Where can I download v2? I'm running 1.9 now and loving it. The best battery I've had, ever. I'm getting 15 to 19 hours usage with ~2hrs display and 1-2hrs talk. The same basic setup since the day I bought it (7/10), multiple gmail accts, wifi and bluetooth on and display set to automatic.
3G problem
Hello I love the ROM. I had Fasty 2.5 but changed to Fasty II 1.9. Now my Browser dont work in 3G, yes in WIFI, also the Opera Mobile, but Opera mini works OK and other software that use 3G like Market and Slingplayer also work OK.
Thanks!
Check out my post here about my GPS issues: http://forum.xda-developers.com/showthread.php?p=17574640#post17574640
Loaded Fusion V and have GPS back. But, I prefer FastyII...
So Far So Good
I haven't had a chance to really test drive the ROM yet, but things are looking fine thus far. There is a small bug. I have the honey smoke theme. I noticed that when I go to make a wifi connection and enable auto rotate (when entering WEP key) I have to manually go into settings in order to turn it off again. The drop down auto-rotate button won't work. Nothing major. Keep up the good works guys!
App kill
3rd day on fasty.. no issues.. Excellent battery life
I miss the CM7 feature which kills the current app by long press Back button. If possible, could you please add that in the next version
I have a problem, sometimes I try to open an app and looks like crash or something because reboot the phone, was with latitude, TouchPal keyboard trying to open it and the last was trying to read a text .
Sent from my SAMSUNG-SGH-I897 using Tapatalk
..I'd like to try this ROM out, Im on currently on apex 9.3 what would I need to do to make to work? Thanks for your time... :cheers:
Is there anyway to make another window default in TW?
Cm7 (2.3.4) to fasty v2.0 92.3.4)
Hello Im currently have my captivate running on cyanogen mod-7.1.0-RC1 (2.3.4). I would like to switch over to fastyv2.0(2.3.4). I have looked everywhere on this site to see if I can just flash it from my sd card or if I needed to take other steps to make the switch to this rom? Help would be greatly appreciated.
caplova said:
Hello Im currently have my captivate running on cyanogen mod-7.1.0-RC1 (2.3.4). I would like to switch over to fastyv2.0(2.3.4). I have looked everywhere on this site to see if I can just flash it from my sd card or if I needed to take other steps to make the switch to this rom? Help would be greatly appreciated.
Click to expand...
Click to collapse
Last I checked fasty 2 thread is closed, and I lack the link to dl atm. But on cyanogen you should flash to stock. And get GB bootloaders if you dont have them. Also If you dont havr bootloaders id recommend flashing jf6 or kb1 (based on your phones build). After on stock flash GB bootloaders and then flash boogs kh3 kernel, then cwm rom. Alternatvly you can flash stock kh3, but i still recommend jf6 or kb1 first.
Im not on my computer so dont have links sorry
Sent from my SAMSUNG-SGH-I897 using xda premium
Hey, I'm having a bit of difficulty getting v2 2.0 to work --
I followed all the instructions to the T, rooted and everything, but I'm having some difficulties getting the ROM to work?
Firmware Version: 2.3.4
Baseband Ver: I897UCKH3
Kernel: 2.6.35.7-I897UCKH3-CL461307
Build: GINGERBREAD.UCKH3
I'm really not sure what the issue is, but it is giving me the old signature verification failed message when I attempt to install. (E:signature verification failed)
Thanks in advance
kisnerct said:
Hey, I'm having a bit of difficulty getting v2 2.0 to work --
I followed all the instructions to the T, rooted and everything, but I'm having some difficulties getting the ROM to work?
Firmware Version: 2.3.4
Baseband Ver: I897UCKH3
Kernel: 2.6.35.7-I897UCKH3-CL461307
Build: GINGERBREAD.UCKH3
I'm really not sure what the issue is, but it is giving me the old signature verification failed message when I attempt to install. (E:signature verification failed)
Thanks in advance
Click to expand...
Click to collapse
You need cwm. The esiest way to get it is flashing boogs kh3 kernel, DesingGears cog5 step 2 kernel (kf1) or any kernel with cwm.
Sent from my SAMSUNG-SGH-I897 using xda premium
Nightly builds for the Thrill (P925) has stopped, P920 builds will work on Thrill P925.
Builds can be found here:
http://download.cyanogenmod.com/?device=p920
Changelog can be found here:
http://cm-nightlies.appspot.com/?device=p920
There should be NO problems at all to upgrade from the latest SelfKang to the lastest Nightly Build.
INSTRUCTIONS:
* Create a nandroid backup in CWM.
* Install the latest Nightly.
* Reboot.
If you're currently using a stock rom or a custom rom that is not based on CM then you must make a factory reset/format data in CWM after installing the latest nightly.
Else you'll get stuck in a bootloop.
NOTICE:
* Please note that this rom will replace your old one if you have a stock rom (Froyo or Gingerbread).
Everything on your current rom will be useless, so backup everything!
If you're currently using Froyo, then you need to flash the latest Baseband;
Use the "LG Updater tool" to update to the latest Stock version so you'll get the latest Baseband, re-root your phone and download Rom Manager from the market.
Install CWM, do a Nandroid backup and install the latest nightly build of CM7.
WHY YOU SHOULDN'T USE CM:
If you're using the 3D functions of your phone as well as the HDMI then you shouldn't change to CM at the moment.
3D and HDMI is broken.
And yes, these releases are newer than the SelfKang4.
This is Not my mod and try asking in this thread before posting me a PM, you'll get a faster reply here.
I've never understood Nightly builds.
What's most of the difference you'll see?
Sent from my LG-P925 using Tapatalk
this may be a full ROM... right?
i used to use CM7 in my SE X10 Mini Pro, and i loved it...
but here on thrill one... what r the limits? does it has 3D??? Radio??? GPS??? Wifi??? it's all working?
i tried to read changelog, but as i am not a developer i cant understand clearly 80% of the info... can u tell what it's not working?
one more question is... is it running GB 2.3.7???? dn't i need to change baseband to GB one???? i have stock froyo rom from LG...
azhhael said:
this may be a full ROM... right?
i used to use CM7 in my SE X10 Mini Pro, and i loved it...
but here on thrill one... what r the limits? does it has 3D??? Radio??? GPS??? Wifi??? it's all working?
i tried to read changelog, but as i am not a developer i cant understand clearly 80% of the info... can u tell what it's not working?
one more question is... is it running GB 2.3.7???? dn't i need to change baseband to GB one???? i have stock froyo rom from LG...
Click to expand...
Click to collapse
I think 3D and HDMI aren't working. Radio, GPS, and wifi were all working before the nightly. I can confirm that wifi is working great. I haven't used GPS so not sure how well it works or not.
It is running 2.3.7 . No you don't need to do anything with the baseband.
The only complaint I have is that the person i call using this rom hears a really bad echo
louisianavoodoo said:
The only complaint I have is that the person i call using this rom hears a really bad echo
Click to expand...
Click to collapse
+1
Also should cell standby be taking 72% of battery? Been barely using for hr and a half and already down to 70% seems to drain faster on standby than when I'm on it.
Sent from my LG-P925 using XDA App
How about make it mount internal and external SD card?
Is there a way to get headset recognition as well? I pressed mine a couple time while playing music, wouldn't pause or skip tracks like normal CM7 would. I've had atleast 2 reboots now but everything else seems great
Alright, time to start building some nightlies.........Ill be on my own in a few weeks....
Yup, but we need something other than this trashy 'CyanogenMod'.
I personally hate CM in general, it's not n00b friendly and it just looks plain dumb.
But if anyone could rocket a GB ROM without having to install a GB break, then count me in.
I hope to see a Froyo ROM soon.
Love you guys but the Thrill is trash and the mods here suck.
gentzleon said:
Alright, time to start building some nightlies.........Ill be on my own in a few weeks....
Click to expand...
Click to collapse
Sent from my LG-P925 using Tapatalk
rydeN- said:
Yup, but we need something other than this trashy 'CyanogenMod'.
I personally hate CM in general, it's not n00b friendly and it just looks plain dumb.
But if anyone could rocket a GB ROM without having to install a GB break, then count me in.
I hope to see a Froyo ROM soon.
Love you guys but the Thrill is trash and the mods here suck.
Click to expand...
Click to collapse
Eh, I agree to a certain extent. However, I wouldn't count noobs as those rooting, flashing ROMs, etc etc. So if they can't be bothered to google some CM info, welll, then...
As far as dumb, most of the time, our phones look dumb out of the box. The CM ROM is just as customizable as any other ROM. I got rid of the skateboard alien ASAP. What is kinda cool is the theme chooser so that you make a bunch of the stuff like battery stat, various widgets, dialer, etc all look different in one click.
I think most of us are just kinda waiting until the new cool phones come out in 2012 and move on.
are there any kernels for this with OC? im coming from foryo and my benchmark would hit up to 3300. now i cant even reach 3k.
uhhhh I flash this rom... and when tried to go back on stock froyo. It stays stuck on LG logo... I did a backup .... flash other roms before and was able to return to stock rooted. It only works with this rom and two others roms" thriller and doomded ... what did I do wrong? I miss my 3D functions ;(
Sent from my SAMSUNG-SGH-I727 using XDA App
I think a lot of people are having the issue with the call echo. Seems to be a problem with the ambient/noise cancellation microphone. Not a big deal if you turn down the call volume.
I am having other issues with the first nightly; can't select items in the notification bar, misaligned keyboard, etc. so will be sticking with SK4 for the time being. That being said, however; it is nice that the Thrill is getting a little love. I'll still be checking the dailies and looking out for a stable build.
donavo said:
are there any kernels for this with OC? im coming from foryo and my benchmark would hit up to 3300. now i cant even reach 3k.
Click to expand...
Click to collapse
Not a kernel, but you can use the same script like before, Check Tekahuna's post, you can get the files for CM there aswell.
CXENTE said:
uhhhh I flash this rom... and when tried to go back on stock froyo. It stays stuck on LG logo... I did a backup .... flash other roms before and was able to return to stock rooted. It only works with this rom and two others roms" thriller and doomded ... what did I do wrong? I miss my 3D functions ;(
Sent from my SAMSUNG-SGH-I727 using XDA App
Click to expand...
Click to collapse
If you want to go back to froyo, use the LG updater tool to go back to stock, there is a few threads that describes how. After that, you can just root your device and go back to the old backup.
thank you very much.... I will do just that
Sent from my SAMSUNG-SGH-I727 using XDA App
Had the weirdest bug ever on the 2nd nightly last night. I was at the mall playing cards when my phone suddenly made this alarm-esque noise. No matter what I did, i couldn't get it to stop. I had to restart my phone which finally put an end to it. Hopefully i don't experience that again lol.
Nightly 2 still has the echo thing going on. I'll try the new ones as they come out.
I have a question : Before on froyo, my SD had a partition that i could put various things into. After flashing CM7, this partition seems to be invisible from my phone (root explorer). For some reason, my computer at home cannot access this partition, but my computer at work can. I have filled my internal sd card from restoring apps. How can I access this partition, or repartition so the internal SD has more space?
Any help with this would be appreciated.
kurrptsenate said:
I have a question : Before on froyo, my SD had a partition that i could put various things into. After flashing CM7, this partition seems to be invisible from my phone (root explorer). For some reason, my computer at home cannot access this partition, but my computer at work can. I have filled my internal sd card from restoring apps. How can I access this partition, or repartition so the internal SD has more space?
Any help with this would be appreciated.
Click to expand...
Click to collapse
I completely know what you mean by SD card.
If you goto CM7 settings> Application, there should be an option named "Use internal storage". If you check that box and reboot, it just flip flops the SD cards. You can access the other, but can't the other. Kinda annoying, wish I had a 32GB MicroSD right about now
i tried going back to froyo from this and it was stuck on LG too. i had many backups. i was able to go back to froyo by flashing doomed again. idk what it is about that one but it took it back to froyo just fine. and from there you can flash ur recovery and ull b fine
I had the crazy-alarm-type bug happen again just now. I believe it was caused by a notification sound that is supposed to play, but instead, starts clipping at an alarming rate at full volume. I tried just about everything you can think of to stop this cacophonous noise, but had to ultimately shut down the phone.
As far as the "SD thing", I did find out that the other portion of the card is actually listed under "mnt" and then "emmc" for anyone that was wondering. I can access this from the phone as well.
So far the nightly builds are great, thanks for the hard work!
Sent from my LG-P925 using XDA App