Database Develop

Cpu Stuck at 245mhz after Rooting Hero CDMA

I just rooted my HTC Hero (Sprint) Stock 2.1 and now I notice my Cpu is running slow. If I install SetCpu it speeds it up right away...Upon opening SetCpu I notice my Cpu speed says 245 mhz max/min. When I the refresh it it says 480/528 but after my screen turns off and back on it slows down again and returns back to 245 mhz. I never had this problem until after I rooted the phone. Why does my phone keep reverting back to 245 mhz and slowing down after I turn my screen off? Also it seems like my Battery life has gone down drastically...
edit: I intalled overclock widget and when I open it it also says 245 mhz. When I then set it up to 528 it makes my phone run fast again. As soon as I turn my screen off and back on it automatically reverts back to 245...

fifedogg said:
I just rooted my HTC Hero (Sprint) Stock 2.1 and now I notice my Cpu is running slow. If I install SetCpu it speeds it up right away...Upon opening SetCpu I notice my Cpu speed says 245 mhz max/min. When I the refresh it it says 480/528 but after my screen turns off and back on it slows down again and returns back to 245 mhz. I never had this problem until after I rooted the phone. Why does my phone keep reverting back to 245 mhz and slowing down after I turn my screen off? Also it seems like my Battery life has gone down drastically...
edit: I intalled overclock widget and when I open it it also says 245 mhz. When I then set it up to 528 it makes my phone run fast again. As soon as I turn my screen off and back on it automatically reverts back to 245...
Click to expand...
Click to collapse
Your phone going to 245 is completely normal. It only gives your phone power when it needs it, and sitting on Setcpu screen isnt going to make it throttle up. You dont want your phone running at 528mhz at all times. It will KILL your battery. Our phones have a setting of "Ondemand", like gives the power on demand, if its not demanding a lot of power it will go back down saving battery life, CPU life and keeping temperatures down.
If you have problems with the phone running slow, i recommend checking out an overclocked kernel. You can run it at stock speeds, if you dont feel comfortable running OC. But if you want the extra power, the choice is always there.

Sounds like something to do with conserving battery by dropping the cpu speed.
-------------------------------------
Sent via the XDA Tapatalk App

Had thr same problem in the beginning way back idk how i guxed it i guess its the stock rom idk
-------------------------------------
Sent via the XDA Tapatalk App

Well on a stock rom setcpu cant do anything other then read the cpu and it will only update when it is force refresh. If you want setcpu to be able to control or change your cpu speeds this will require installing a rom that is overclock enabled. There are several located on this forum.

For some reason SetCpu was doing this. I just set it back to 480/528 and rebooted it and then uninstalled SetCpu and now everything is fine. For some reason SetCpu was the cause of this. I reinstalled to make sure and sure enough it was happenening again. I'm glad I figured it all out

Yeah, apparently you decided to create a new thread instead of utilizing the response I gave to your thread last night:
If it is not a ROM running an overclockable kernel apps like setCpu and OC widget will actually slow your phone down. If you would like to see your clock speed without this side-effect, I suggest SystemPanel.
Click to expand...
Click to collapse
For future reference, anyone not using a ROM based on Toast's kernel DO NOT install an OC program. This is the typical behavior and it is not fun to deal with because you will have to be patient waiting for the phone to start up and open the OC program to set it back and uninstall. I believe that just uninstalling and rebooting is sufficient, but am not 100%.

lineman78 said:
Yeah, apparently you decided to create a new thread instead of utilizing the response I gave to your thread last night:
Click to expand...
Click to collapse
I actually made that thread at the same time last night. I didnt know where to put it exactly...

fifedogg said:
I actually made that thread at the same time last night. I didnt know where to put it exactly...
Click to expand...
Click to collapse
Aw, this must be the one from the Dev section and got moved over here. I noticed it over there, but had already posted on the one in Q&A... So now there are 2 in Q&A.

Collins VS SetCPU

Im curious why some choose Collins over SetCPU and vice versa. In my head "Collins Tweak" may be best since it has no running processes and/or utilizes any memory (from what I can tell). Im curious why SetCPU is popular and the results that have been achieved by using one versus the other.

Pauper7 said:
Im curious why some choose Collins over SetCPU and vice versa. In my head "Collins Tweak" may be best since it has no running processes and/or utilizes any memory (from what I can tell). Im curious why SetCPU is popular and the results that have been achieved by using one versus the other.
Click to expand...
Click to collapse
I personally am a SetCPU user, and I've gone back and forth numerous times before deciding on it. In theory you are correct, it does not utilize memory as a running process would, however in terms of pure performance SetCPU will still beat it. This is because Collins will gradually reduce maximum CPU speed over the life of the battery, reducing performance to increase battery life. Also, on battery with Collins even the 768 default is set at 691 when on battery (768 only when charging).
I also (and this is mere opinion) found my phone to be a big laggy when on Collins. I also like SetCPU because you can create custom themes for battery depending on scenario. For example, I set my screen on speed to be 576 min / 768 max when screen is on, 245 min / 352 max when screen is off. I find that 245 min when screen is on causes a little lag, and with Collins I can only set a blanket min/max. I can also set custom profiles for when below a certain %, when the phone gets too hot, etc. The ability to change CPU governors is really good as well.
It is very much based on personal tastes. SetCPU will be better for performance purposes, and Collins will be better for battery life. I have UltimateJuice to max my battery life (around 60 hrs), so performance is what I care more about. But to each their own .

I started out using Collins, but was experiencing spontaneous reboots. That stopped when I uninstalled Collins. Since then I've been trying out SetCPU and am pleased with it. Today, for instance, my phone has been off the charger for 16 hours and I still have 50% battery with moderate/average use on several phone calls, text messaging, some web browsing, etc.
Phone has been perfectly stable and is running nicely oc'd to 729.

how are you supposed to properly uninstall collins tweak? or can you just run setcpu over the collins tweak? I used to have setcpu when I was running fresh toast. but ever since I got the Cyanogenmod, I have been using collin's.

masterfuel said:
how are you supposed to properly uninstall collins tweak? or can you just run setcpu over the collins tweak? I used to have setcpu when I was running fresh toast. but ever since I got the Cyanogenmod, I have been using collin's.
Click to expand...
Click to collapse
Go into Terminal Emulator - type:
su
batt-rm.sh
poof - its gone!

[Q] Kernel for CM7.2 Stable that allows OC and governor change

I have just updated to Cyanogenmod 7.2 stable on my P990 Optimus 2x (Fido Canadian version).
When I go to the CPU settings I cannot change the min/max frequencies or select a CPU governor.
I have done some research and found kernels like Vork and FauxDS, but they are for 7.1 nightlies so I am not sure if it is a good idea to flash them.
What I am most afraid about is the possibility of getting the black screen of death while my phone sleeps (it happened once already but it stopped after I changed to a different charger and reflashed CM7.2).
The reason why I want to change the settings is that there tends to be scrolling lag (my old HTC Desire Z was faster!) and there is also a bit of lag waking up the phone (lockscreen does not appear instantly when pressing power button).
Does anyone know what is the best kernel I can flash to enable frequency/governor changes in CM7.2 stable? I would prefer not to change the ROM if possible as I am kinda nooby in comparison to the XDA community in general. Thanks for any help.

I suggest you try Etana kernel. It has the things you need. Also use CPU master to set profiles and minimum CPU frequencies. I used something like min freq 352 MHz when asleep (don't worry doesn't drain battery) and I had no lag whatsoever.

heavencanwait said:
I suggest you try Etana kernel. It has the things you need. Also use CPU master to set profiles and minimum CPU frequencies. I used something like min freq 352 MHz when asleep (don't worry doesn't drain battery) and I had no lag whatsoever.
Click to expand...
Click to collapse
Are you referring to http://forum.xda-developers.com/showthread.php?t=1427646 ?
If so, do I just flash the zip off the sd card using ClockworkMod? And what are the differences between lite and DS?
Thanks.

All right, after reading, I determined I don't need LOC/HOC/DS as I don't intend to raise the max frequency, I just want to raise min frequency.
Installed the Etana kernel via CWM and it works. I can raise minimum frequency, though I still cannot see a governor option! Any idea how to get my governor setting back?

You can use CPU master and set some profiles. It's not exactly the same as governors but it's as close as it gets and it gets the job done pretty well. As far as I remember there were two governors for O2X - powersave and performance. I've always used performance and I can't tell if there's a HUGE difference in battery usage. I guess performance utilizes higher CPU frequencies when the device is asleep and somehow scales faster to even higher frequencies when needed to. But this might be complete crap as I am not too much into how CPUs work...
And please use the THANKS button (right below the user name), it kind of forum etiquette and it keeps people motivated to help others. Thank the Etana developer too.

heavencanwait said:
You can use CPU master and set some profiles. It's not exactly the same as governors but it's as close as it gets and it gets the job done pretty well. As far as I remember there were two governors for O2X - powersave and performance. I've always used performance and I can't tell if there's a HUGE difference in battery usage. I guess performance utilizes higher CPU frequencies when the device is asleep and somehow scales faster to even higher frequencies when needed to. But this might be complete crap as I am not too much into how CPUs work...
And please use the THANKS button (right below the user name), it kind of forum etiquette and it keeps people motivated to help others. Thank the Etana developer too.
Click to expand...
Click to collapse
Thanks for letting me know, I didn't realize there was a thanks button at first haha.
Fixed!

As for now CPU Master in his profiles let's you choose governor. We have only 2. Power save nd Performance.
Sent from LG 2X using Tapatalk 2 Elite

Clocking problems

Hi,
first, I want to apologize for my bad english.
I have a problem with the clockingspeed of my HTC One.
I was impressed by how bad the battery life of the One is.
I found out, that the CPU is always clocking at 1,7Ghz, both values (Min AND Max) are set to 1.7 Ghz.
If I turn on the battery-safe option, it clocks at 1Ghz, but again on both values.
So, I have downloaded some CPU apps, which should let me change the clocking speed of the CPU.
Well, it works, but if I turn on "Set on boot", and reboot, the values are gone.
I thought, this would be caused by the stock ROM, so I have flashed the "InsertCoin" ROM, but no changes.
Has someone the same problem, or does someone has a solution for me?
regards.

The clock speed is dynamically controlled. When the phone is not in use, it should reduce the clock speed.
It sounds like you have an app that is preventing it from sleeping.
Install betterbatterystats and look for partial wakelocks. Feel free to leave a screenshot here.

Hi,
even if there is an app which would prevent my phone from clocking down, the MIN-value should be at 300/400mhz, and not be the same as the max-value ..
regards.

No idea..?

what hes saying is theres a rogue app mostly likely in the background thats pushing your phone that it thinks it should ramp up the speed of your phone. so even if you have it set to 384/1.7 the phone is detecting "oh **** *so and so* app is beastly bump the speed to max 1.7. bad analogy but you get the idea. i would start by wiping the phone install a brand new rom and DONT install anything just the mhz reader. then check. if your on a fully clean flash and still holding at max value all the time. then next is to check the CPU governor. it may have been set to performance at some point "accidentally" the performance governor forces the phone to hold at max speed. mostly only used for synthetic benchmarks.

Nope nope nope.
Nope.
I just had to S-Off my phone ..

Overclock CM11

Hi there,
really sorry if this has already been around, but i've been searching this forum up and down and didn't find a thing.
Anyways, i was wondering how i could enable overclocking under cm11 nightly? Could anyone point me towards a solution? Thanks

Well ...
http://forum.xda-developers.com/droid-4/development/5-0-custom-oc-kernel-t3041512
It should work (in the past it works)
Install it on your Cyanogenmod Rom
Fervi

ferviverus said:
Well ...
http://forum.xda-developers.com/droid-4/development/5-0-custom-oc-kernel-t3041512
It should work (in the past it works)
Install it on your Cyanogenmod Rom
Fervi
Click to expand...
Click to collapse
There's a guy who said that that kernel doesnt work on cm11...it work's for you in the past?

For CM11 and other AOSP 4.4 ROMS, the most fully-featured and overclockable kernel is JBX. You can use the one intended for the RAZR.
Joojoobee's is good, and certainly the best for Lollipop, but due to its extra voltage management stuff the JBX kernel has a higher overclock ceiling.
Use the newest kernel from here.
Boot into Safestrap, make a backup in case something goes horribly wrong, then flash the package to start up the installer. In the installer, don't install any of the tweaks, at least a couple of them cause instability for our phone, and don't bother with the init.d stuff. Just install the kernel itself and Trickster Mod. Trickster, FYI, is probably the best app for managing JBX, but other apps can as well.
Done. Reboot phone, hopefully it won't bootloop, once back up increase speed until it starts freezing when you try to use it, bump voltage 10-20mv, find ceiling again. I think the JBX thread has better/more detailed instructions, but that's about the gist of it.
Maximum advised voltage is 1490mv iirc, don't try to even approach that unless you want to cook eggs on the back of your phone.

Thanks a bunch!
After messing around with both solutions, Jojobee's solution gave me a bootloop but the other one worked.
However i can't seem to get past 1300mhz when overclocking, that seems to be the limit. I was aiming to try to reach 1400, any idea how i could go about that? I can't seem to find an option to set the max frequency higher than 1300.

Well i was playing a little with JBX kernel..these are my conclusions:
- Kernel install/works fine if you don't install 10% battery mode..otherwise you are goingo to have android crashes
- Kernel performance it's below than current cm11 m13 stock kernel...i believe is due to full scale freq that it has...cpu spend a lot time switching from one freq to another...if you overclocked you will have almost the same performance than NON-OC stock kernel..that's why stargo applied and later reverted full scale on stock months ago...meaby if JBX kernell would have support to boost driver (like cm12 OC kernel) it would be better...but it hasnt...
So my conclusions...dont waste time on JBX kernel...sorry my 4 my english
Enviado desde mi XT894 mediante Tapatalk

Milp said:
However i can't seem to get past 1300mhz when overclocking, that seems to be the limit. I was aiming to try to reach 1400, any idea how i could go about that? I can't seem to find an option to set the max frequency higher than 1300.
Click to expand...
Click to collapse
I don't think you can set the CPU higher than 1.3ghz, at least not in the way you're thinking.
In the case of the JBX kernel, you overclock the Main Processor Unit (MPU) speed. I don't remember what tab it's under in Trickster, but it should be the same one as the voltage settings. I couldn't even begin to guess where it'd be as far as other apps.
The default is 100mhz. This is multiplied by each frequency step; e.g. 1.3ghz is actually a 13x multiplier of the base 100mhz.
So to obtain 1.4ghz(ish), simply increase the MPU clock from 100mhz to 108mhz, since 108*13=1404.
If you're lucky, you'll be be able to do this without needing to touch the voltage, if not...read the FAQ in the JBX post, because I don't remember offhand exactly how to set voltages :v
Once you know how, I would think a 5-10mv bump would be all that'd be needed to stabilize most CPUs for 1.4ghz.
fyi, ignore if you already have stuff for these:
Antutu is a decent app for both testing stability and checking to make sure you're not hitting the heat throttle.
Cooltool isn't a bad thing to use either, if configured to show CPU speeds, since it'll show you if the CPU has been forcefully throttled back (if the CPU gets too hot, it'll forcefully change the maximum multiplier to 10x/11x to protect itself from baking; if it does, back your voltage off and be happy with whatever speed you've attained).