Related
Okay, I have SEARCHED XDA & SEARCHED GOOGLE and read probably close to thousands of posts trying to find the answer... maybe I just missed it but I tried...
I am thinking of moving from CM 4.0.4 to JacHERO... (no commenct please about possible move from CM it has nothing to do with the recent C&D) but I am afraid to wipe SD CARD & start fresh with everything...
Does NANDROID backup everything? Meaning does it COMPLETELY backup not just the OS but all the partitions on the SDHC card? (i.e. FAT32 & ext2 & ext3)?? I dont think it does from what I can tell & have read...
What I want to be able to do is wipe everything clean, install HERO, clean, if I totally hate it or its too slow for me or what not, I want to be able to restore what I had running...
please no comments on how hero is better or how CM is better etc...
I would suggest you do a search for switchrom or switchrom.sh
That should be what you're looking for.
HTH
search for the Q&A section?
Nandroid backs up all you need that if you get a bootloop for some reason you can just restore it and your good...... next time post in the proper place
P.S.- why are you afraid of wiping your SD card that would be a lot easier?
Switchrom.sh or Bart
Switchrom is good, but doesnt backup the entire ext3 partition. If complete EXT3 backup is what you seek, see BART (Backup and Recovery Tool).
Have fun and read lots!
emilj said:
Okay, I have SEARCHED XDA & SEARCHED GOOGLE and read probably close to thousands of posts trying to find the answer... maybe I just missed it but I tried...
I am thinking of moving from CM 4.0.4 to JacHERO... (no commenct please about possible move from CM it has nothing to do with the recent C&D) but I am afraid to wipe SD CARD & start fresh with everything...
Does NANDROID backup everything? Meaning does it COMPLETELY backup not just the OS but all the partitions on the SDHC card? (i.e. FAT32 & ext2 & ext3)?? I dont think it does from what I can tell & have read...
What I want to be able to do is wipe everything clean, install HERO, clean, if I totally hate it or its too slow for me or what not, I want to be able to restore what I had running...
please no comments on how hero is better or how CM is better etc...
Click to expand...
Click to collapse
If you want to back up your SDCARD, you need to plug it into your computer (can be through phone when phone is in "mount" mode) and run this command:
dd if=/dev/sdcarddevice | gzip -9 > /some/place/to/make/backup.gz
You can NOT make a backup of the sdcard from your phone OS since 1) phone internal storage is not nearly sufficient, 2) backing up the sdcard TO the sdcard is retarded and doesn't accomplish anything.
My suggestion;
first do a nandroid backup to backup the phone internal storage to the sdcard, then backup the sdcard. Then you have everything no matter what.
On more bit of complication...
I currently have fat32 & ext2 BUT no swap setup on my SDHC card....
I would need to wipe the card & re-partition it so that I can have swap.
BART looks like the key, but will it re-partition the sdhc card too?? It says BART backs up the ext partitions but doesnt say anything about the partitions...
This is not development related. Next time, please keep your questions within the Q&A forum. Moved.
lbcoder said:
If you want to back up your SDCARD, you need to plug it into your computer (can be through phone when phone is in "mount" mode) and run this command:
dd if=/dev/sdcarddevice | gzip -9 > /some/place/to/make/backup.gz
You can NOT make a backup of the sdcard from your phone OS since 1) phone internal storage is not nearly sufficient, 2) backing up the sdcard TO the sdcard is retarded and doesn't accomplish anything.
My suggestion;
first do a nandroid backup to backup the phone internal storage to the sdcard, then backup the sdcard. Then you have everything no matter what.
Click to expand...
Click to collapse
You read between the lines for me thank you... the point was to backup to a computer (obviously I cant backup 5gb to the remaining 3gb on my card )
I ran SU first & tried the command you gave me & I got this error:
dd: can't open '/dev/sdcarddevice': No such file or directory
Which makes sense if I am running it in "mounted" mode because the SD card is no longer visible to the OS.... right?
I currently have fat32 & ext2 BUT no swap setup on my SDHC card....
I would need to wipe the card & re-partition it so that I can have swap.
BART looks like the key, but will it re-partition the sdhc card too?? It says BART backs up the ext partitions but doesnt say anything about the partitions...
Click to expand...
Click to collapse
Yeah Bart isnt the way to go to repartition your SDcard, if you have the 1.4 cyanogen recovery you can do the repartitioning from the recovery console, a basic search can provide you with many guides on how to do something like this, hope this helps
stefan.buddle said:
Yeah Bart isnt the way to go to repartition your SDcard, if you have the 1.4 cyanogen recovery you can do the repartitioning from the recovery console, a basic search can provide you with many guides on how to do something like this, hope this helps
Click to expand...
Click to collapse
Okay, I'm not totaly newb if I sound like it...
I can repartition my card no problem... I was looking for a backup tool that would restore ALL partitions & ALL data if I was to wipe the OS & wipe the card & start fresh...
Theoretically backup to a PC... I can load up a Linux build if I need to... the "DD" was a good idea... would this be a good solution to load up linux to a "DD" combined with a Nandroid backup? Again, would I have to repartition my card back to the way it was?
emilj said:
You read between the lines for me thank you... the point was to backup to a computer (obviously I cant backup 5gb to the remaining 3gb on my card )
I ran SU first & tried the command you gave me & I got this error:
dd: can't open '/dev/sdcarddevice': No such file or directory
Which makes sense if I am running it in "mounted" mode because the SD card is no longer visible to the OS.... right?
Click to expand...
Click to collapse
#1: you don't run this on your phone, you run it on your COMPUTER.
#1a: when you set your phone to "mount", it is not actually mounting. That is what happens on your computer (if you so choose), AFTER putting the phone into its mode where it is mountable and after the computer detects the device. They really should call it "mass storage mode" or something that isn't strictly incorrect.
#2: you need to use some brains in running a command.
#2a: DON'T EVER just do stuff you see online. *ALWAYS* research the commands and understand what they do before you run them. Otherwise you *WILL* eventually do something stupid, like "for FILE in /dev/sd?; do dd if=/dev/zero of=$FILE; done", which will wipe every single bit of information in all of your hard disks with zeros. In this case, the command I suggested will do no damage, but you didn't know that...
#2b: There is no such device as /dev/sdcarddevice. This is intended (following #2a) that you replace it with what makes sense ON YOUR SYSTEM, i.e. "sdcarddevice" is variable and will change depending on when/how you attached the device and what other devices are already there. Same with the /some/path/to/etc
lbcoder said:
#1: you don't run this on your phone, you run it on your COMPUTER.
#1a: when you set your phone to "mount", it is not actually mounting. That is what happens on your computer (if you so choose), AFTER putting the phone into its mode where it is mountable and after the computer detects the device. They really should call it "mass storage mode" or something that isn't strictly incorrect.
#2: you need to use some brains in running a command.
#2a: DON'T EVER just do stuff you see online. *ALWAYS* research the commands and understand what they do before you run them. Otherwise you *WILL* eventually do something stupid, like "for FILE in /dev/sd?; do dd if=/dev/zero of=$FILE; done", which will wipe every single bit of information in all of your hard disks with zeros. In this case, the command I suggested will do no damage, but you didn't know that...
#2b: There is no such device as /dev/sdcarddevice. This is intended (following #2a) that you replace it with what makes sense ON YOUR SYSTEM, i.e. "sdcarddevice" is variable and will change depending on when/how you attached the device and what other devices are already there. Same with the /some/path/to/etc
Click to expand...
Click to collapse
Gee thanks... I thought you were giving me a command that I wasnt aware of...
So the bottom line is that I am still where I started, is there any way to backup the OS & all partitions to my computer that I can restore if necessary??
So something like imaging the sdcard like winhex, and a nandroid or switchrom should be fine. I'll be trying this soon. I need to learn more about the ins and outs first. Please let me know what you find or how u get this to work for u. With dd or whatever. Thanks.
you are making this WAY too complicated, make a nandroid, use BART, move the files over to your computer by dragging and dropping. then do whatever horror you want to do to your phone. if it messes up, then make your partitions again using parted in the recovery console. restore the contents of your sdcard from your computer to your sdcard, restore your nandroid. ta-da
it is not hard to backup your ext3, it is even simpler to backup your fat32. stop over thinking all of this and search a little next time.
You fail, please try again
Yeah makes sence now that I think about it, partitioning the sdcard was pretty ez. I'm just gonna repartition to include a swap and keep that setup for everything and BART the rest. Sometimes I just don't see the answers right away until they are pointed out to me lol sry .....I failed again.
Opps, some how ended up in this topic by mistake
Ok so I rooted and flashed the recovery image. Now I want to apply the MoDaCo Custom Hero ROM. Whats the easiest way to partition the SD card to allow apps2SD?
When I was in the recovery mode there were partition options can it from there or do I have to go on the desktop and use the cmd prompt?
Just use the partition option in recovery.
Thank you for the quick response
hmmm apps2sd is not working. I got the Rom to work fine but before i flashed the rom I partitioned fat32+ext2+swap in the recovery screen so I can have apps2sd access and it does not work
Ok got the Apps2sd to work, but how can I see both partitions. I can't can only see the update.zip folder, footprints. and some other file but my music and photos are nowhere to be found and the Nanodroid back up. I did copy the nanodroid back up to my phone, but should it still be there on the main partition? Help please.
justin24 said:
Ok got the Apps2sd to work, but how can I see both partitions. I can't can only see the update.zip folder, footprints. and some other file but my music and photos are nowhere to be found and the Nanodroid back up. I did copy the nanodroid back up to my phone, but should it still be there on the main partition? Help please.
Click to expand...
Click to collapse
As should be obvious, partitioning the sdcard erased what was there.
2 things
1. Windows won't see that EXT3 Partition, it's not support by Microsoft.
2. The format to FAT SWAP EXT wipes the ENTIRE CARD, nandroid backups included.
I do an Nandroid anytime I go to mess with something in Shell or load a ZIP. Here in the past few days it seems like I do 2 or 3 a day lol.
More than likely you have a card larger than 2 gigs and the backups seem to be realativly small. I copy all of mine to a folder on my computer and Rename them with a small descript of the Rom build and Date. So I know what it is I can load back.
Well day one is over and I think I might have the first bricked NC. I used CWR to flash this ROM:
http://forum.xda-developers.com/showthread.php?t=932211
I kept getting a keyboard input error and it never worked correctly. I've been reading nonstop through the forum and now my NC won't turn on.
I look through the thread again, only to find out that it is locked and in red letters it now says "just keep away from the SDcard formatting option in settings." Anyone want to guess what I did before I read that? Yup, I formatted the SD card through settings.
It says to use a certain file to flash boot again but I have no idea how to do that if the thing won't even turn on. Does anyone have any suggestions? I can't post in the thread because it is locked.
MY NOOK IS ALIVE AGAIN!!!!!!!!
Not sure what all I did but it's up and running again. I started with the partition file mentioned in the closed thread. I then did a full restore to 1.0. This then lead me to a boot loop with the grey N screen. From there I re-rooted and it almost loaded. After that I did the power +N button and it reinstalled 1.0 for me. I have since rooted the NC and am leaving it as is until Cyanogen comes out with their ROM.
you made a big mistake by starting off with that flash to emmc rom. You should have started with rooting the original firmware.
Try this to get back to stock.http://forum.xda-developers.com/showthread.php?t=931720
If this doesnt work use my fool proof guide here:
Code:
http://mrm3.net/2011/01/24/113/
I rooted the NC using Huskermania's video on YouTube. I should have left well enough alone but seeing all the videos of 2.2, I wanted it as well.
Thanks you for the link. I plan to follow every step later in the day, after get some rest and relieve some stress. My only worry is, will the Nook turn on after I pop in the SD card and how long do I hold the power button before I give up?
I'm familiar with rooting and flashing phones, I am currently running CM-6.1 on an Evo and a Hero without any problems. Before that I messed with everything from the PPC-6601 to the TREO 800W.
try this:
http://forum.xda-developers.com/showpost.php?p=10965703&postcount=31
maybe it's like the root sd and you just need to let it run without any on screen indicators. you could pm him and see if he can offer any help.
good luck.
So I've read through everything and when I installed the SDK I had issues with my PC and getting the drivers to load. I didn't install them and went straight to flashing it, so no matter which guide I followed the driver install failed.
I'm now on a Mac and I'm installing the SDK. Any advice on how to take me from step #11 and on.? I can't seem to be able to find the Windows button fo some reason.
hi -- assuming you still need help, this CWR bootable SD saved me many times.
download this file (I think you may already have it)
http://dl.dropbox.com/u/2248236/froyo-eMMC-0.2.img
so open terminal in your mac and insert the microSD card into an sdcardreader or adapter. If you want to be extra safe open Disk Utility in the Utilities folder in Applications and erase the SD card.
then in terminal:
$ diskutil list
(figure out which /dev/disk# is the sd card)
$ diskutil unmountDisk /dev/disk#
$ dd if=/path/to/that/img/file/froyo-eMMC-0.2.img of=/dev/disk# bs=1m
(then wait an inordinate amount of time when terminal won't tell you anything and you think it is not doing anything... for it to image the sd card)
when it is done, it will tell you XXXXXX files in 0 files out
remove that SD from your computer and put it back in -- it should show up in finder as "Boot" and check to make sure a "restore to 1.0.1 zip" is on it -- if not, let me know, and I'll link you that file as well. You can just copy over that zip to the newly imaged SD card if it isn't there.
once you've got that SD card imaged with the complete-restore-1.0.1.zip on it as well, make sure your nook is unplugged and powered off -- I assume, just hold down the power button for like 10 seconds just to be safe. Put the microSD into the microSD slot and plug the nook into the computer -- that tells it to boot from SD.
you should enter Clockworkrecovery at which point you need to navigate the program with the vol up vol down power and home buttons (power is back, home is select) and go to the mount option and reformat system, then data, then boot. It always freezes on me after reformatting boot, so just power off and back on and it should return to CWM. Then go through the steps to flash that recovery zip that is on the sd card! Make sure you select "select zip from SD card" and you should be good to go.
good luck.
Hey, I got a Virgin Mobile HTC Desire 510. Y'know, the blue one....
I fudged up severely the other evening and installed another rom which bricked my phone. I did manage however restore a stock back-up I managed to find online, however the phone was still rooted, tampered and TWMP(did I get the abbreviation correct?) is still on it. So I go and install Supersu and Busybox in an attempt to go back to where I left off as I've been attempting to get the phone to do the internal to SD card bit but no success thus far, especially not right now. In anycase, after reinstalling Supersu, I load it up and get the message of "There is no SU binary installed and SuperSU cannot install it. This is a problem! If you just upraded to Android 4.3, you need to manually re-root. consult the relevant forums for your device.". I attempted to reinstall threw recovery and it seems to be working till I get the actual phone's Google ROM running and click on the SuperSU program only to get that message.
Any suggestions or advice on how to do this and get SuperSU back up? How do I exactly re-root or can I somehow install the binary via PC or flash?
Can the HTC Desire 510(Virgin Mobile version) even have the the script/rom/trick setting to have the SD Card used as Internal memory or is this quest just wasted time?
Thanks
EDIT- Device version is 0PCV1
Okkvltist said:
Hey, I got a Virgin Mobile HTC Desire 510. Y'know, the blue one....
I fudged up severely the other evening and installed another rom which bricked my phone. I did manage however restore a stock back-up I managed to find online, however the phone was still rooted, tampered and TWMP(did I get the abbreviation correct?) is still on it. So I go and install Supersu and Busybox in an attempt to go back to where I left off as I've been attempting to get the phone to do the internal to SD card bit but no success thus far, especially not right now. In anycase, after reinstalling Supersu, I load it up and get the message of "There is no SU binary installed and SuperSU cannot install it. This is a problem! If you just upraded to Android 4.3, you need to manually re-root. consult the relevant forums for your device.". I attempted to reinstall threw recovery and it seems to be working till I get the actual phone's Google ROM running and click on the SuperSU program only to get that message.
Any suggestions or advice on how to do this and get SuperSU back up? How do I exactly re-root or can I somehow install the binary via PC or flash?
Can the HTC Desire 510(Virgin Mobile version) even have the the script/rom/trick setting to have the SD Card used as Internal memory or is this quest just wasted time?
Thanks
EDIT- Device version is 0PCV1
Click to expand...
Click to collapse
Hello and welcome to xda,
Where exactly did you get the back-up from that you used to restore?
You were close it is TWRP or Team Win Recovery Project.
I believe the reason you can't install SuperSU is because you don't have a write protect removed kernel installed. You can find one here. Check out their related forums and see which one you like best. They are pretty much all great. Some aren't being supported anymore as a heads up. To flash a kernel, in case you didn't know how:
Go into Settings-About-Software information-More-Kernel version and write down the name of the Kernel
1. Power the phone down
2. Hold "Down" button then hold "Power" key while still holding "Down" button, until you get into the bootloader
3. Release "Down" and "Power" button
4. Tap "Power" key once and it will change from "HBOOT" in white letters with blue background to "FASTBOOT" in white letters with red background on your phone
5. Connect your USB cable and it will say "FASTBOOT USB" on your phone
6. Navigate to the folder you have your fastboot.exe from Android Studio or wherever you obtained it from (Mine is in C:\Users\myusername\Android\sdk\platform-tools)
7. Hold the "Shift" key then right click in any empty space in that folder
8. Select "Open command window here"
9. Type
Code:
fastboot devices
in the command window, then press Enter just to make sure it is picking up your phone
10. You should see something like:
Code:
HT42PXU89475 fastboot
if you don't make sure your USB cable is inserted all the way and you are in "FASTBOOT USB"
11. Make sure your recovery.img or whatever the name of the recovery is, is in the folder you are currently in
11. Type
Code:
fastboot flash boot boot.img
in the command window
You should see something like:
Code:
C:\Users\yourusername\Android\sdk\platform-tools>fastboot flash boot boot.img
sending 'boot' (12932 KB)...
OKAY [ 1.350s]
writing 'boot'...
OKAY [ 1.030s]
finished. total time: 2.385s
Your phone will still be in FASTBOOT USB mode
To test it out to see it was correctly flashed, reboot the phone
Go into Settings-About-Software information-More-Kernel version and see that the version changed
You can follow my little guide to use SD as Internal memory. Let me know if you need any help.
I won't be able to get to this til tomorrow but another issue is I can't d/l apps off Google play. It comes up with some server issue and some weird code that starts with an R. Sorry I can't give full details as I'm at work :/.
Okkvltist said:
I won't be able to get to this til tomorrow but another issue is I can't d/l apps off Google play. It comes up with some server issue and some weird code that starts with an R. Sorry I can't give full details as I'm at work :/.
Click to expand...
Click to collapse
Is your phone completely stock or do you have any custom ROMs? I have seen errors like that.
blaqueknight said:
Is your phone completely stock or do you have any custom ROMs? I have seen errors like that.
Click to expand...
Click to collapse
I'm fairly certain I reinstalled Busybox when I was installing(or trying to) Supersu. I'm giving the kernel bit a shot.
Oh the stock back-up is this(No, I didn't back up my phone since I didn't see a reason, I had everything I needed on the computer/sd) file:
http//qc-.androidfilehost-com/dl/PObYV5uN55P2PGDNrX1pLQ/1430391523/95832962473396445/2014-12-02--16-24-34+KOT49H+Stock.not.rooted.rar
(can't post links since i'm a newb)
Had to make a backup of my empty phone and put the files into the empty back up to restore it.
UPDATE- Flashed over Modded Kernel V2.6.1 since that looked like a safe bet. Installed correctly. Tried to reinstall Supersu. Got "Android is upgrading". Supersu Installed. Next is the SD Card bit.
Okkvltist said:
I'm fairly certain I reinstalled Busybox when I was installing(or trying to) Supersu. I'm giving the kernel bit a shot.
Oh the stock back-up is this(No, I didn't back up my phone since I didn't see a reason, I had everything I needed on the computer/sd) file:
http//qc-.androidfilehost-com/dl/PObYV5uN55P2PGDNrX1pLQ/1430391523/95832962473396445/2014-12-02--16-24-34+KOT49H+Stock.not.rooted.rar
(can't post links since i'm a newb)
Had to make a backup of my empty phone and put the files into the empty back up to restore it.
Click to expand...
Click to collapse
I'm sorry, please disregard that last comment. I was posting like your only problem was the Play Store. lol Sorry. But yea, check out those things I mentioned to you and you should be able to get SuperSU back up, if not I'll help you with anything else.
Okkvltist said:
I'm fairly certain I reinstalled Busybox when I was installing(or trying to) Supersu. I'm giving the kernel bit a shot.
Oh the stock back-up is this(No, I didn't back up my phone since I didn't see a reason, I had everything I needed on the computer/sd) file:
http//qc-.androidfilehost-com/dl/PObYV5uN55P2PGDNrX1pLQ/1430391523/95832962473396445/2014-12-02--16-24-34+KOT49H+Stock.not.rooted.rar
(can't post links since i'm a newb)
Had to make a backup of my empty phone and put the files into the empty back up to restore it.
UPDATE- Flashed over Modded Kernel V2.6.1 since that looked like a safe bet. Installed correctly. Tried to reinstall Supersu. Got "Android is upgrading". Supersu Installed. Next is the SD Card bit.
Click to expand...
Click to collapse
UPDATE 2- When partioning the sd card, it continues to come up as ext2. When I go into Link2SD and I go to select I get the message on whatever I select- "Mount script cannot be created. mount: invalid argument"
Okkvltist said:
UPDATE 2- When partioning the sd card, it continues to come up as ext2. When I go into Link2SD and I go to select I get the message on whatever I select- "Mount script cannot be created. mount: invalid argument"
Click to expand...
Click to collapse
Are you using Aparted? What was the method you used to partition? You should partition as ext4.
Yeah, I downloaded Aparted, went in to partition the SD card("8" gigs) and selected ext4 but it comes out ext2. Do I need S-OFF and/or 4EXT Recovery?
Okkvltist said:
Yeah, I downloaded Aparted, went in to partition the SD card("8" gigs) and selected ext4 but it comes out ext2. Do I need S-OFF and/or 4EXT Recovery?
Click to expand...
Click to collapse
Did you select Create then Format? If it still comes out ext2 after that, I don't know what the problem is. Format will take a while because it is creating journals.
blaqueknight said:
Did you select Create then Format? If it still comes out ext2 after that, I don't know what the problem is. Format will take a while because it is creating journals.
Click to expand...
Click to collapse
It's saying the partition doesn't exist when I go to format after creating the partition. Even when creating the proper ext from the create screen, it still doesn't come up as ext4.
other info
device- /dev/block/mmcblk1.
when I opened up link2sd its asking me for mmcblk1p2 but there is no mmcblk1p2
Okkvltist said:
It's saying the partition doesn't exist when I go to format after creating the partition. Even when creating the proper ext from the create screen, it still doesn't come up as ext4.
other info
device- /dev/block/mmcblk1.
when I opened up link2sd its asking me for mmcblk1p2 but there is no mmcblk1p2
Click to expand...
Click to collapse
Are you trying to partition the whole SDcard as ext4? To properly partition the card to be used with Link2SD you have to:
1. Delete the sdcard
2. Create a FAT32 partition of any size of your choosing
3. Format the FAT32 partition
4. Create an ext4 partition of any size of your choosing
5. Format the ext4 partition (this will take a long time, as it will create journals that are used to recover from an error such as removing the device while files are being copied)
After following those steps, Link2SD should properly create the script/mount and you should be able to link to your sdcard
If you are doing those steps perfectly and you still have an error, we have to find out another solution
Ok, I still can't get it to make Ext4......
However, weirdness- I made a Fat32 Partition and went into Link2SD. Link2SD was able to use/read the Fat32 partition. Tried to create/change the Fat32 and it didn't work. Tried to make a third partition under ext4 and it comes up ext2. Openned Link2SD and it doesn't read/use the ext2. Uses the additional Fat32 no sweat. I don't know how much of it is working(tried downloading Brave Frontier and had to delete loads of stuff in general) usual memory bull**** ensures and I see theres a lock for the full copy of Link2SD....
another thing; I can't get into/mount the open part of my SD card. Should I go back to square one or should I blow the meager 3 bucks for the full copy and see if I can do it from there?
PS- Does the class of the sd decide on if I can partition an ext3-4? Cause if so, mine is only a class 4 SD card.
Okkvltist said:
Ok, I still can't get it to make Ext4......
However, weirdness- I made a Fat32 Partition and went into Link2SD. Link2SD was able to use/read the Fat32 partition. Tried to create/change the Fat32 and it didn't work. Tried to make a third partition under ext4 and it comes up ext2. Openned Link2SD and it doesn't read/use the ext2. Uses the additional Fat32 no sweat. I don't know how much of it is working(tried downloading Brave Frontier and had to delete loads of stuff in general) usual memory bull**** ensures and I see theres a lock for the full copy of Link2SD....
another thing; I can't get into/mount the open part of my SD card. Should I go back to square one or should I blow the meager 3 bucks for the full copy and see if I can do it from there?
PS- Does the class of the sd decide on if I can partition an ext3-4? Cause if so, mine is only a class 4 SD card.
Click to expand...
Click to collapse
I just made a couple of very simple tutorials to use Aparted and Link2SD and they are both working for me. Check them out: Aparted tutorial, Link2SD tutorial. I believe the ext2 that you are talking about is around the 10 second mark in the Link2SD video. Do you mean the /data/sdext2? That is just the name of the second sdcard partition.
If you can, you should buy the full copy of Link2SD to link external data and whatever other options become available.
The class of sdcard shouldn't have anything to do with the partition. That's just a classification of the speed of the card.
If needed, I'll make more videos to show exactly how everything is done. I think sometimes it is better to show than simply explain how something is done.
Hope this helps.
Wow.......I mean seriously, holy zen, it worked.
I had to start over from scratch since my f'ling screwed so much crap up but after everything was reinstalled and flashed and what not, It made the ext4. I don't know why the programming is so touchy you have to create it threw such weird steps but I believe it worked. Upgraded the link2sd. Next question and I'm pretty sure on the answer- Are you able to remove the SD card or is it perma-bound to the phone(IE- if I change SD cards around, will everything crash?)? Thank you so much
Okkvltist said:
Wow.......I mean seriously, holy zen, it worked.
I had to start over from scratch since my f'ling screwed so much crap up but after everything was reinstalled and flashed and what not, It made the ext4. I don't know why the programming is so touchy you have to create it threw such weird steps but I believe it worked. Upgraded the link2sd. Next question and I'm pretty sure on the answer- Are you able to remove the SD card or is it perma-bound to the phone(IE- if I change SD cards around, will everything crash?)? Thank you so much
Click to expand...
Click to collapse
I'm happy it worked out good for you.
Yes, you are able to remove your sdcard. Be aware that your apps are on your sdcard so if you remove it, you remove them. They are placed on your sdcard and symlinked so Android thinks they are still on your phone in the place they would normally be. Nothing should crash, they just shouldn't show up. There is some great info about Link2SD here.
@blaqueknight..
nice videos man.
Dear community,
About a year after i really wanted to root my htc one mini 2, i decided I wanted to factory reset my phone.
So after this year I forgot everything i knew, and managed to wipe the whole OS...
I would really appreciate any hints that might help me to fix my phone again.
Info on where i'm standing with the problem:
1. I tried to find my stock ROM on this site and couldn't because under "firmware" i can only find 2.18.161.2, though mine is 2.18.166.1 - does this matter? It's the vodafone one, and they even have a nandroid backup for my version, but not the stock firmware.
2. I have TWRP installed, and the site tells me i need to have my bootloader locked to flash stock roms. I have no problem relocking or unlocking it, but in the relocked state, i can not access TWRP recovery and use the sideload feature to flash the rom. The phone always goes back to the bootloader screen and the title says " **security warning** ".
3. i would really like to get my phone back as close to it's stock state as possible.
I am kind of afraid of flashing the available stock firmware, as I don't know how to proceed from there without TWRP.
I read a lot about this topic, but i'm kind of loosing it right now...
Can some kind soul lend me their wisdom and help me out?
Would be much appreciated
mfG Montor
Hi,
You can either get put back everything to stock, as in flash stock recovery, relock the bootloader, get the available version from their site but the version number should be higher than the one already installed, however with S-Off you can flash any version.
Or
Leave everything as it is and perform a Nandroid restore.
What file are you getting from the website, is it RUU file, ROM, is it exe or zip ?, RUU will be beneficial to put back to complete stock with proper conditions met ?
WITH CUSTOM RECOVERY YOU CANNOT FLASH STOCK ROM.
TryllZ said:
Hi,
You can either get put back everything to stock, as in flash stock recovery, relock the bootloader, get the available version from their site but the version number should be higher than the one already installed, however with S-Off you can flash any version.
Or
Leave everything as it is and perform a Nandroid restore.
What file are you getting from the website, is it RUU file, ROM, is it exe or zip ?, RUU will be beneficial to put back to complete stock with proper conditions met ?
WITH CUSTOM RECOVERY YOU CANNOT FLASH STOCK ROM.
Click to expand...
Click to collapse
I would actually really like to put everything back to stock, because the reason for the root is somewhat gone now.
As already mentioned, I sadly can not find the stock recovery that i need.
I need the Vodafone x.xx.166.x format, and the closest i get would be the Vodafone x.xx.161.x format of the stock recovery.
What happens if i try to flash the available one? Do I brick my phone once again, or does it say something like "recovery version not matching device version" ?
Also, if by any chance the flash is successfull and the stock recovery x.xx.161.x is on my phone, how can i flash the stock firmware without TWRP?
Though I really like the idea of a more or less complete stock phone, I could totally go with the nandroid backup too.
The problem is, I already downloaded the files but as my OS is gone and i didn't turn on usb-debugging, i can not move a single file onto my device. (I assume that's the issue, because my adb push file /sdcard/TWRP/Backups didn't quite work...
Edit: Because you asked, I don't actually know what would be the best solution right now, but the only file fitting my device version is the nandroid backup, but there are RUUs for x.xx.161.x - which, as already mentioned, is the closest i can get to x.xx.166.x
Montor said:
I would actually really like to put everything back to stock, because the reason for the root is somewhat gone now.
As already mentioned, I sadly can not find the stock recovery that i need.
I need the Vodafone x.xx.166.x format, and the closest i get would be the Vodafone x.xx.161.x format of the stock recovery.
What happens if i try to flash the available one? Do I brick my phone once again, or does it say something like "recovery version not matching device version" ?
Also, if by any chance the flash is successfull and the stock recovery x.xx.161.x is on my phone, how can i flash the stock firmware without TWRP?
Though I really like the idea of a more or less complete stock phone, I could totally go with the nandroid backup too.
The problem is, I already downloaded the files but as my OS is gone and i didn't turn on usb-debugging, i can not move a single file onto my device. (I assume that's the issue, because my adb push file /sdcard/TWRP/Backups didn't quite work...
Edit: Because you asked, I don't actually know what would be the best solution right now, but the only file fitting my device version is the nandroid backup, but there are RUUs for x.xx.161.x - which, as already mentioned, is the closest i can get to x.xx.166.x
Click to expand...
Click to collapse
Here's how you can do it without developer option enabled.
- Make sure device is 100% charged, if you don't know how much charge exists, leave the device on charge for about 1-2 hours.
- Find an MMC of 4GB (Hoping your MMC slot is working)
- You will need Serial Number of your device for Nandroid restore, you can get it from the device box with IMEI stickers.
For RUU (zip file)
- Download the available RUU and rename it to 0P8BIMG.zip (I'm assuming its the same a normal HTC One Mini 2)
- Copy the file into the root of the MMC
- Insert MMC into device
- Boot up device and enter boot loader
- As the device enters bootloader it will automatically start flashing, if all conditions are met.
NB: I frankly can't remember if this will work with TWRP installed.
For Nandroid restore.
- THIS STEP NEEDS BE DONE FROM A PC, Extract all files from the Nandroid restore zip, connect the MMC to the PC.
- In the root folder of the MMC create a TWRP folder and inside it create a folder named BACKUPS and inside this create a folder named YOUR DEVICE SERIAL NUMBER (I haven't tested it with a different named folder so I don't know) inside this folder create a folder with the OS version number of your device and inside this folder place all extracted files.
- Put the MMC into the device.
- Enter TWRP and choose restore
- Locate the folder created in the earlier step, the TWRP Backup folder with files extracted in it.
- Let TWRP restore.
- As far as my knowledge goes it should work fine.
I will advise that you do a restore from Nandroid, because you have TWRP working this is the easiest method, to get the phone up and running then you can decide to go for RUU by enabling developer options and more.
I'm using a Nnadroid restore more than 6 months now, no problem whatsoever.
Good Luck
TryllZ said:
Here's how you can do it without developer option enabled.
- Make sure device is 100% charged, if you don't know how much charge exists, leave the device on charge for about 1-2 hours.
- Find an MMC of 4GB (Hoping your MMC slot is working)
- You will need Serial Number of your device for Nandroid restore, you can get it from the device box with IMEI stickers.
For Nandroid restore.
- THIS STEP NEEDS BE DONE FROM A PC, Extract all files from the Nandroid restore zip, connect the MMC to the PC.
- In the root folder of the MMC create a TWRP folder and inside it create a folder named BACKUPS and inside this create a folder named YOUR DEVICE SERIAL NUMBER (I haven't tested it with a different named folder so I don't know) inside this folder create a folder with the OS version number of your device and inside this folder place all extracted files.
- Put the MMC into the device.
- Enter TWRP and choose restore
- Locate the folder created in the earlier step, the TWRP Backup folder with files extracted in it.
- Let TWRP restore.
- As far as my knowledge goes it should work fine.
I will advise that you do a restore from Nandroid, because you have TWRP working this is the easiest method, to get the phone up and running then you can decide to go for RUU by enabling developer options and more.
I'm using a Nnadroid restore more than 6 months now, no problem whatsoever.
Good Luck
Click to expand...
Click to collapse
That is exactly where I'm stuck with my nandroid backup.
I just can't seem to find a way to push the folder with all the files onto my sd-card.
I tried with "adb push \myfolder /sdcard/TWRP/Backups/myphonesnumberthingy", but it gives me "Device not found" error.
The device is connected, and with "fastboot devices" it shows in the list.
Did I miss something important here?
All the drivers are installed, and I shouldn't be able to lock and unlock the bootloader if the device wasn't properly connected right?
Edit: Nevermind, it seems I can't read. I will try to put my sd-card out of my phone and connect it to my pc somehow
Montor said:
That is exactly where I'm stuck with my nandroid backup.
I just can't seem to find a way to push the folder with all the files onto my sd-card.
I tried with "adb push \myfolder /sdcard/TWRP/Backups/myphonesnumberthingy", but it gives me "Device not found" error.
The device is connected, and with "fastboot devices" it shows in the list.
Did I miss something important here?
All the drivers are installed, and I shouldn't be able to lock and unlock the bootloader if the device wasn't properly connected right?
Edit: Nevermind, it seems I can't read. I will try to put my sd-card out of my phone and connect it to my pc somehow
Click to expand...
Click to collapse
Use an MMC reader for working your MMC with a PC.
Your device connecting to your PC in the bootloader does not mean your commands will work, ADB works with device switched on, in bootloader its fastboot and NOT ADB.
TryllZ said:
Use an MMC reader for working your MMC with a PC.
Your device connecting to your PC in the bootloader does not mean your commands will work, ADB works with device switched on, in bootloader its fastboot and NOT ADB.
Click to expand...
Click to collapse
So i have an adapter for connecting the MMC to my PC.
I plug it in, and it shows me THIS.
Inside my recovery, if I use the file manager, I can't seem to access/find a single set of directories that looks like the one above...
Montor said:
So i have an adapter for connecting the MMC to my PC.
I plug it in, and it shows me THIS.
Inside my recovery, if I use the file manager, I can't seem to access/find a single set of directories that looks like the one above...
Click to expand...
Click to collapse
Have you extracted files from the Nandroid Backup zip and placed them into TWRP>Backups>Phone Serial Number>OS Version Number folder
Now, in TWRP choose Restore from the main screen, and locate the folder where your files are placed.
When in Restore, make sure you choose Storage: Micro SDCard at the top below Time, Battery and CPU.
TryllZ said:
Have you extracted files from the Nandroid Backup zip and placed them into TWRP>Backups>Phone Serial Number>OS Version Number folder
Now, in TWRP choose Restore from the main screen, and locate the folder where your files are placed.
When in Restore, make sure you choose Storage: Micro SDCard at the top below Time, Battery and CPU.
Click to expand...
Click to collapse
Yes i did extract the files in the zip, and placed them in TWRP/BACKUPS/serial/osversion.
But there is no way to locate it or access it.
When i open the file manager in TWRP, i see directories like "boot, cache, data, dev, devlog" etc, and also sdcard and external_sd.
External_sd is empty, and opening sdcard gives me only the directory created by my own nandroid backup, with the path /sdcard/TWRP/BACKUPS/HT533WR02324/2016-07-17--08-52-32.
Edit: Okay now we are getting closer to solving this.
I tried to change TWRP backup from internal storage to micro sdCard - but it shows (0MB) beside it.
Choosing it either way, does nothing. The checkbox internal storage stays checked.
I'm going to restart my phone and see if something changes...
Edit2: Did nothing, unfortunately.
If i remove the card, the box can't be checked.
If i insert it again and tap on it, it stays highlighted for about 4 seconds and then internal storage is still checked :/
Montor said:
Yes i did extract the files in the zip, and placed them in TWRP/BACKUPS/serial/osversion.
But there is no way to locate it or access it.
When i open the file manager in TWRP, i see directories like "boot, cache, data, dev, devlog" etc, and also sdcard and external_sd.
External_sd is empty, and opening sdcard gives me only the directory created by my own nandroid backup, with the path /sdcard/TWRP/BACKUPS/HT533WR02324/2016-07-17--08-52-32.
Edit: Okay now we are getting closer to solving this.
I tried to change TWRP backup from internal storage to micro sdCard - but it shows (0MB) beside it.
Choosing it either way, does nothing. The checkbox internal storage stays checked.
I'm going to restart my phone and see if something changes...
Edit2: Did nothing, unfortunately.
If i remove the card, the box can't be checked.
If i insert it again and tap on it, it stays highlighted for about 4 seconds and then internal storage is still checked :/
Click to expand...
Click to collapse
Firstly it shouldn't show you 0MB for SDCard, anyway, place the extracted Nandroid files in the /sdcard/TWRP/BACKUPS/HT533WR02324/2016-07-17--08-52-32 folder and then try again, if this folder is accessible then it should work.
MB: YOUR CONSTANT USE OF THE TERM FILE MANAGER IN TWRP IS GIVING ME AN IMPRESSION THAT YOU ARE ACCESSING THE FILE MANAGER IN TWRP WHERE AS YOU HAD TO PRESS THE RESTORE BUTTON FROM THE MAIN SCREEN, THE FILE MANAGER BUTTON IS DIFFERENT ALTOGETHER IN TWRP.
TryllZ said:
Firstly it shouldn't show you 0MB for SDCard, anyway, place the extracted Nandroid files in the /sdcard/TWRP/BACKUPS/HT533WR02324/2016-07-17--08-52-32 folder and then try again, if this folder is accessible then it should work.
MB: YOUR CONSTANT USE OF THE TERM FILE MANAGER IN TWRP IS GIVING ME AN IMPRESSION THAT YOU ARE ACCESSING THE FILE MANAGER IN TWRP WHERE AS YOU HAD TO PRESS THE RESTORE BUTTON FROM THE MAIN SCREEN, THE FILE MANAGER BUTTON IS DIFFERENT ALTOGETHER IN TWRP.
Click to expand...
Click to collapse
Oh it appears I didn't mention this.
The folder i CAN see, is inside the internal storage under "/sdcard/TWRP/BACKUPS/HT533WR02324/2016-07-17--08-52-32" - and I can't access the internal storage, i would have pushed the files if that was possible.
No no, I use the backup function to locate my nandroid backup files.
But with the backup function, I couldn't change directories and look for files so I used the file manager to do that.
The file manager doesn't allow me to change to sd card either way, so that doesn't work.
Edit:
The sd-card i have inside my phone right now is 64gb big - is it possible that this is too big to be recognized?
I also have a 32gb one, would that make a difference?
Montor said:
Oh it appears I didn't mention this.
The folder i CAN see, is inside the internal storage under "/sdcard/TWRP/BACKUPS/HT533WR02324/2016-07-17--08-52-32" - and I can't access the internal storage, i would have pushed the files if that was possible.
No no, I use the backup function to locate my nandroid backup files.
But with the backup function, I couldn't change directories and look for files so I used the file manager to do that.
The file manager doesn't allow me to change to sd card either way, so that doesn't work.
Edit:
The sd-card i have inside my phone right now is 64gb big - is it possible that this is too big to be recognized?
I also have a 32gb one, would that make a difference?
Click to expand...
Click to collapse
As per spec, this device supports 64GB too but I myself use a 32GB one, so yes you can try that and again you will need to access TWRP restore through the RESTORE button in TWRP main screen and NOT BACKUP button.
What you can do is copy the /sdcard/TWRP/BACKUPS/HT533WR02324/2016-07-17--08-52-32 folder into you SDCard TWRP folder and place the extracted files in this folder and try a restore.
TryllZ said:
As per spec, this device supports 64GB too but I myself use a 32GB one, so yes you can try that and again you will need to access TWRP restore through the RESTORE button in TWRP main screen and NOT BACKUP button.
What you can do is copy the /sdcard/TWRP/BACKUPS/HT533WR02324/2016-07-17--08-52-32 folder into you SDCard TWRP folder and place the extracted files in this folder and try a restore.
Click to expand...
Click to collapse
Okay it seems my 32gb one is broken, it's showing up but not as a mass storage.
Well if I could access the sd card with twrp at all, that would really help me - but I can't.
Backup botton and restore button behave the same when choosing the Micro SDcard (0MB).
And with the file manager, accessing the sd card gives me an empty directory...
Edit: Googling this problem tells me I need to format my card, as TWRP doesn't recognize it.
I read FAT32 somewhere, I read exFAT somewhere, what format does TWRP work with?
Montor said:
Okay it seems my 32gb one is broken, it's showing up but not as a mass storage.
Well if I could access the sd card with twrp at all, that would really help me - but I can't.
Backup botton and restore button behave the same when choosing the Micro SDcard (0MB).
And with the file manager, accessing the sd card gives me an empty directory...
Edit: Googling this problem tells me I need to format my card, as TWRP doesn't recognize it.
I read FAT32 somewhere, I read exFAT somewhere, what format does TWRP work with?
Click to expand...
Click to collapse
First can I know if you can see any file/folder in SD when accessing it through Restore in TWRP ?
Format it as exFat, hopefully it should work..
You mentioned its not showing as Mass Storage, what is it showing up as ?
TryllZ said:
First can I know if you can see any file/folder in SD when accessing it through Restore in TWRP ?
Format it as exFat, hopefully it should work..
Click to expand...
Click to collapse
First, through restore I can't navigate to other folders at all.
All I can do there, is tapping on Internal storage and choosing micro SDcard - which doesn't work.
It's like TWRP knows there is a sd card in my phone, but somehow can't access it.
That's why I assume it's due to it's formatting.
Switching folders/directories is only possible with the file manager with the advanced button - but this only shows me two things.
1. External_sd --> shows me an empty directory
2. sdcard --> shows me the folder where TWRP created the backup folder when I did the backup myself. (I assume that's the internal storage because under the restore button, this is the only thing that i shows up)
I read somewhere, that exFAT is only recognized by TWRP if you have a newer version of the recovery installed.
I don't know exactly but the version i'm using is definitely on of the first versions that came out.
Also, I checked my SD-card on my laptop, and apparently it allready is exFAT.
Edit: I was talking about the 32gb card not showing up.
I don't think it really matters, but my description wasn't very accurate.
The SD-card (32gb) is shown as the SD-card like it should, but the PC doesn't show any kind of used/free space bar underneath it.
Also, opening it gives a message like "There is no card connected"
Montor said:
First, through restore I can't navigate to other folders at all.
All I can do there, is tapping on Internal storage and choosing micro SDcard - which doesn't work.
It's like TWRP knows there is a sd card in my phone, but somehow can't access it.
That's why I assume it's due to it's formatting.
Switching folders/directories is only possible with the file manager with the advanced button - but this only shows me two things.
1. External_sd --> shows me an empty directory
2. sdcard --> shows me the folder where TWRP created the backup folder when I did the backup myself. (I assume that's the internal storage because under the restore button, this is the only thing that i shows up)
I read somewhere, that exFAT is only recognized by TWRP if you have a newer version of the recovery installed.
I don't know exactly but the version i'm using is definitely on of the first versions that came out.
Also, I checked my SD-card on my laptop, and apparently it allready is exFAT.
Edit: I was talking about the 32gb card not showing up.
I don't think it really matters, but my description wasn't very accurate.
The SD-card (32gb) is shown as the SD-card like it should, but the PC doesn't show any kind of used/free space bar underneath it.
Also, opening it gives a message like "There is no card connected"
Click to expand...
Click to collapse
The SDCard not showing free space bars is windows could possibly mean SDCard error.
FAT, FAT32 and exFAT work for Android so yes if you format it in any of these it ought to work. exFAT format is most commonly used in mobile devices in terms of SDCard.
Card disconnecting in Windows, I am guessing your card is having I/O issues, what this means is that if you try and format it and the MMC disconnects during the format process there is a chance it will be permanently damaged.
What you can do is just use Quick Format, this will not check for any errors, however if there is any sector errors in the MMC, flasing through TWRP could cause unexpected problems if that sector is accessed.
Advisably get a working 4GB SDcard to avoid any hiccups.
TryllZ said:
The SDCard not showing free space bars is windows could possibly mean SDCard error.
FAT, FAT32 and exFAT work for Android so yes if you format it in any of these it ought to work. exFAT format is most commonly used in mobile devices in terms of SDCard.
Card disconnecting in Windows, I am guessing your card is having I/O issues, what this means is that if you try and format it and the MMC disconnects during the format process there is a chance it will be permanently damaged.
What you can do is just use Quick Format, this will not check for any errors, however if there is any sector errors in the MMC, flasing through TWRP could cause unexpected problems if that sector is accessed.
Advisably get a working 4GB SDcard to avoid any hiccups.
Click to expand...
Click to collapse
I have the 64gb one i was always using, and the not working 32gb one.
Both are exFat.
I just wanted to know if it might work formatting the 64gb one
Edit: Concerning formatting, this is the thread I was referring to.
Montor said:
I have the 64gb one i was always using, and the not working 32gb one.
Both are exFat.
I just wanted to know if it might work formatting the 64gb one
Edit: Concerning formatting, this is the thread I was referring to.
Click to expand...
Click to collapse
The device supports 64GB and so does TWRP, now concerning your SDCard, yes it would work (as long as its hardware-error free)..
I'm using TWRP version 2.8.5.0 and my SDCard is exFAT and works fine with TWRP..could be that older versions of TWRP might not support exFAT but I personally can't confirm that as which is the older version that you are using.
TryllZ said:
The device supports 64GB and so does TWRP, now concerning your SDCard, yes it would work (as long as its hardware-error free)..
I'm using TWRP version 2.8.5.0 and my SDCard is exFAT and works fine with TWRP..could be that older versions of TWRP might not support exFAT but I personally can't confirm that as which is the older version that you are using.
Click to expand...
Click to collapse
Update!
I realized, it's probably really the 64gb sd card, that's the issue here.
I took the 4gb one out of my fathers phone - bam.
TWRP recognized it immediately and restore is in progress!!!
Will keep updating!
Edit: IT F*ING WORKED!
Thank you SO much for your help!!!
Is there any way I can give you somethign in return?
Montor said:
Update!
I realized, it's probably really the 64gb sd card, that's the issue here.
I took the 4gb one out of my fathers phone - bam.
TWRP recognized it immediately and restore is in progress!!!
Will keep updating!
Edit: IT F*ING WORKED!
Thank you SO much for your help!!!
Is there any way I can give you somethign in return?
Click to expand...
Click to collapse
Great...:good::good::good:
Frankly I never imagined it could be the 64GB, I was purely under the assumption TWRP would accept 64GB MMC, anyway I lacked that information but now I know.
Nope, its working now is more than enough for me.