When I tryed to flash NRG rom from SD, (not my first time, so HARD-SPL.... etc. is done). I copied RHODIMG.NBH do root of SD as usual (but I've got new 16gb kinston class2 SD card), but when reset to bootloader, it says: "No img File" and reset back to bootloader.
Does anyone has a solution to solve this puzzle?
From what I know you can only flash through SD card if the memory card is 2gigs or less.
I can never flash a ROM with my 4gig but the same .nbh file works fine when put into my 2gig.
I flashed with my 8GB SanDisk some days ago, without any problems.
I had this once. I think this happenend because my storage card was called "Opslagkaart". (This is the dutch translation for "Storage card".)
If this is the case, then you just flash true usb and the next time you can just flash true the SD card.
Thank you to all for response. Looks like a SD cards' issue.
It's Almost Always an SD Card Issue
I have flashed a lot of ROMs from different SD cards. My SanDisk ones always work, my cheap-o, no name brands have issues. I don't know why but there you go. Storage capacity doesn't seem correlated to flashing success.
Works with a 16Gb
I flashed yesterday, several times, getting my defective TP2 ready for warranty replacement. No problems.
I think you may have a bad SD card.
formatting is also important
aqwarty said:
When I tryed to flash NRG rom from SD, (not my first time, so HARD-SPL.... etc. is done). I copied RHODIMG.NBH do root of SD as usual (but I've got new 16gb kinston class2 SD card), but when reset to bootloader, it says: "No img File" and reset back to bootloader.
Does anyone has a solution to solve this puzzle?
Click to expand...
Click to collapse
I assume that you formatted the new card to FAT 32...if not or you are not sure, reformat and try again.
just slide in your old one and flash it with that. and when your doen flashing pop in the 16gb
I had the same issue after buying a new 4gb microSD, searched the forums and found a suggestion that it was formatted as FAT not FAT32, after a quick format all worked fine
Related
On my computer it's fine. I just want to listen to my music. Damaged or not.
What causes Damaged SD cards?
Try to reformat it and see if it works. There are several things that can cause a card to go bad.
I have and just spent countless hours getting music on the card and I downloaded an .apk when I got error (Installed and worked fine) then just got error.
How to safe me from these from happening again?
All my apps are gone due to app2sd bummer
sillyshy said:
How to safe me from these from happening again?
Click to expand...
Click to collapse
Just do what you always prolly do. Just make sure to unmount before you disconnect. Sometimes the cards can just go bad. Just make sure to get a name brand card and get a class 6 (you don't have to). It was prolly just a fluke.
Sandisk 8gb class 2 I do unmount error for past 3 months. Know I can't get back my apps2sd to rework after I did a format.
How did you format it? In the phone from UI? If so then it erased your ext partition.
Look in HERE for good guide on how to check what partitions do you have and to format and repartition.
Good luck
If your running swapper, you need to turn it off before mounting. Thats the main cause if its not actually damaged.
I had that happen to me when I tried using Apps 2 SD 2. It said it corrupted my SD, and when ever I tried to unmount from the PC, it would freeze up. I just backed it up, deleted all my partitions, reformated and made new ones. What ever A2SD you're using, make sure you follow tuts correctly.
If you use AppsToSD to partition your card and you get an error saying that your SD card is corrupted or damaged, ignore it. Take out the card, format the Fat32 partition on your PC (a full format, not quick erase). When it's done, both the Fat32 and ext2 partitions will be there. I have experienced that problem several times.
Also, you can do adb to get the files off the ext2 partition before you use the phone to remove the partition and re-format the card.
Well guess what all I did was turn off my phone overnight and charge it. This morning turned back on got the same good message after spending 5 hours putting music onto my card. So this time I am doing a full format of the card and just using fat32 nothing more no apps2sd I think that may be my problem. Cause when using it I don't get the option to safe remove the sd card in SD card settings.
My 2-yr old 8gig Sandisk Class 2 SDHC suddenly went kaput and won't be detected by my Topaz.
This sd card has been previously fat32-formatted and worked for 2 yrs.
Lately, before flashing a cooked ROM, I ran the mtty1.42 if that matters
Now, my phone won't even detect another sdhc (4gig Sandisk, Class 6) which is working fine on my wife's Raphael and/or my PC.
The error message the defunct 8gig SD card gives when connected via card reader to my XP sp2 machine is:
Exception Processing Message c0000013
Parameters 75b6bf7c 4 75b6bf7 c 75b6bf7c
[Cancel] [Try Again] [Continue]
You can't format something that is undetected, right? Any clue, please? Thanks.
Sandisk SDHC Class 2 goes dead, and won't get detected
My 2-yr old 8gig Sandisk Class 2 SDHC suddenly went kaput and won't be detected by my Topaz.
This sd card has been previously fat32-formatted and worked for 2 yrs.
Lately, before flashing a cooked ROM, I ran the mtty1.42 if that matters
Now, my phone won't even detect another sdhc (4gig Sandisk, Class 6) which is working fine on my wife's Raphael and/or my PC.
The error message the defunct 8gig SD card gives when connected via card reader to my XP sp2 machine is:
Exception Processing Message c0000013
Parameters 75b6bf7c 4 75b6bf7 c 75b6bf7c
[Cancel] [Try Again] [Continue]
You can't format something that is undetected, right? Any clue, please? Thanks.
Yea that happens my 1yr 8Gb class 6 dies a while ago but that was from my using it for readyboost and eboostr(unrelated).Now i got this 4gb class 2 thats pretty fast If you had swapper then i think the card could be damaged, try formatting that sd card in recovery mode.
there is a way to reformat the card if its not physically damaged but it seems like yours is. I dont rmr the commands to do it in gparted, butits possible
Hallo,
i cooked many ROMs and every time i try to flash using SD Card (8GB), but without any sucess, it does not find any ROM to flash!
I renamed the cooked ROM to blacimg.nbh (also tried blackimg.nbh), copy to SD Card, Rebo0t into Bootloader mode (Power + Volume Down), it reboots and search for ROM then change to serial (usb)
I used search but no answer found
What am i doing wrong?
Thnax in Advance
WBR
Siemens Lover
SiemensLover said:
Hallo,
i cooked many ROMs and every time i try to flash using SD Card (8GB), but without any sucess, it does not find any ROM to flash!
I renamed the cooked ROM to blacimg.nbh (also tried blackimg.nbh), copy to SD Card, Rebo0t into Bootloader mode (Power + Volume Down), it reboots and search for ROM then change to serial (usb)
I used search but no answer found
What am i doing wrong?
Thnax in Advance
WBR
Siemens Lover
Click to expand...
Click to collapse
Which file did you rename to blacimg.nbh (that's correct and not blackimg.nbh)? Did you save it to the root of the sd card as suggested (although mine is in a folder and this also works)? Because the steps you are describing are correct and should work (work like that for me). The only thing I can think is that there is possibly something wrong with the file you are using. Is it one of your own cooked roms?
ClydeB1 said:
Which file did you rename to blacimg.nbh (that's correct and not blackimg.nbh)? Did you save it to the root of the sd card as suggested (although mine is in a folder and this also works)? Because the steps you are describing are correct and should work (work like that for me). The only thing I can think is that there is possibly something wrong with the file you are using. Is it one of your own cooked roms?
Click to expand...
Click to collapse
Thanx for ur reply
Yes, i cook my own clean ROMs, the ruu_signned.nbh is renamed to blacimg.nbh and is directly copyed to the root of my SD Card
I do not know what is wrong!
WBR
Siemens Lover
faced the same prob long time ago with a old 4 Gb card...no matter what i've did was not able to flash. However I sugest to reformat your sd card (FAT 32 and not on your pc/laptop, do it with your phone) and then try again after formating, altough it may not help. to be sure that you are not doing wrong try another SD card if possible.
Another option to check your self is flashing with ActiveSync after formating.
Good Luck
p.s. It seems this is happening often if you used your SD card in another device
I'd a similar problem while flashing on my old P3300
To avoid the problem, I'm using a 1gb micro sd dedicate only to rom flashing but with a single partition of 256MB.
dunno if this could help u
cheers
I was having exactly same problem today when I tried to flash - mine's 8gb mini SD which came as a part of package from Orange, U.K.. I ended up using normal USB cable but I was wondering why it didn't work...
zephyr said:
I was having exactly same problem today when I tried to flash - mine's 8gb mini SD which came as a part of package from Orange, U.K.. I ended up using normal USB cable but I was wondering why it didn't work...
Click to expand...
Click to collapse
Fashing with some big SD >4gb could generate some issue. Use one small dedicated to that and format it first in Fat32.
Hi Carl, thanks for your advice - it actually worked like a charm. I didn't really thing 8gb would cause this problem. I used just a plain 2gb ScanDisk card, formatted in Fat 32 and put only blacimg.nbh following normal procedures - thank you very much again!
My 2 cents
I had a similar problem not long ago with my 8Gb Micro SD that came with the card. I'd re-formatted it via the PC and altered the default settings based on a thread I read on here which was supposed to speed up access to the card. If I remember correctly it was changing the default allocation size.
Long story short, reformatted back to default settings and I was able to flash again from SD. IMO it's moreso the format of the card, not so much it's size as I never had a problem with flashing from card before tweaking it's format settings.
SD Card
I always flash from my SD card.
My latest card is a 16Gb class4 SanDisk, and I must have flashed more than 50 times from this. I always put my blacimg.nbh file in the root of the card.
Size of the card is not important, it just have to be formated in FAT32.
There are several reports that some brands of card do not work very well with Windows Mobile.
One time I purchased a Kingston card that simply would not work.
Hi I have problem with flashing my x1... when I want flash it with SD card, it write: "No image file!"...but ROM is there... it works only with USB... (SD card was formatted, named correctly kovsimg.nbh,...)
Mich3lin said:
Hi I have problem with flashing my x1... when I want flash it with SD card, it write: "No image file!"...but ROM is there... it works only with USB... (SD card was formatted, named correctly kovsimg.nbh,...)
Click to expand...
Click to collapse
do you have another sd to try with? some manufacters are reported to be problematic
yep... when it was functional I used card from Kingston (4GB) and Sandisk (4GB)...now i tried A-Data (16GB) and it won't work... after that i tried again other cards, but with same result....
Mich3lin said:
yep... when it was functional I used card from Kingston (4GB) and Sandisk (4GB)...now i tried A-Data (16GB) and it won't work... after that i tried again other cards, but with same result....
Click to expand...
Click to collapse
kingston is one of the reportedly "difficult" ones, I have a SanDisk 16GB and never hat any issues...
you said formatting is ok, everything else on card is recognized in a file explorer, just *.nbh files during bootloader are not, that it?
yep.. but i little think that is not only problem with card...because previously when I don't copy ROM on card and start flasher this "Error" not be displayed..there was another one...
Recently my SD card became "damaged" or so the Android OS told me. I have a AData Class 6 16gb MicroSDHC card. When it gave me the initial message I attempted to "format" the card, yet it simply "pretended" to format it and then try to mount it again, where it said it was damaged. I tried to wipe the SD card, then i tried to wipe my phone, and neither of those seemed to fix it.
I spoke with a friend in the XDA IRC channel and he showed me an article saying that its possibly related to a bad boot, where i had no battery and tried to boot my device resulting in a fried SD card. This seemed likely, but then when i tried to use ANOTHER SD Card (2GB Sandisk) this one had the same issues.
Both of the SD cards work in my laptop card reader, so I no longer believe it to be a Card issue, and more a phone issue. I was able to boot into recovery and partition the SD cards, or so it said it partitioned. And then i was able to put the SD card into my computer after partitioning, putting some files on it, and then wiping it in recovery mode. All with the card still "functioning" but as soon as I boot into Android it says that the card is damaged, and the card no longer functions on my computer and I have to reformat it.
Is this a hardware issue with my G1? Or a software issue? All of the articles I have read about related problems say that it is a bad card, Which is why I am confused that a new card does not work as well.
Radio: 2.22.23.02
ROM: HTCClay's SuperFast G1 Donut v1.3.3
Umm I think its a rom issue personally. Have you tried to wipe and reflash a different rom and try it? Or even reflash the same rom after a fresh wipe. Leave sd card formatted on fat 32 let the rom boot. Let it settle down. Then if everything seems ok. Then part sd. The reason why I'm saying this first is because I've had issues like this before. But at least try this so you can start to try and cancel things out.
sent from my superfroyo dream
I'm having a weird problem with a Nexus One. It had a 2GB microSD card in it that seemed to go corrupt (all the file names went crazy) so I reformatted it and it happened again within minutes. So today I bought a new 8GB microSD card and and the Nexus now gives the error of "Blank SD Card - SD card blank or has unsupported filesystem." It is unable to format the card, but it doesn't give an error. I tried formatting the card to FAT32 on my computer, still the phone thinks it is blank/unsupported.
I'm hoping the SD slot isn't fried... any thoughts?
You could try reformating the SD card in a computer using SDformater with erase on.
I have the same problem for a few weeks now. My phone can't seem to read the sd card at all. Thought it was the sd card so I bought a new one, but problem remains. I know both cards work (have tested them in another phone and the computer reads them). I've tried formatting the card in the phone and reformatting with erase on using SDFormatter in my computer but my phone refuses to read it. Think it might be my sd slot as well...
Currently running CM 7.1.0. Haven't tried a factory reset or flashing another ROM (how would one go about doing that with no sd card?) as I'm not too keen to lose that data if I can help it.
Did you manage to fix it?
I was not able to fix it and after many hours of troubleshooting, so I gave up. Good luck to you, and please reply if you find a solution.