Database Develop

General queries before flashing HTC P3600i

Hi Guys
I have a HTC P3600i in Australia. I had a few queries before I try flashing my phone.
These are my current settings.
ROM Version: 3.00.707.18
ROM Date: 07/24/07
Radio Version: 1.46.30.11
Protocol Version: 32.79.7020.19H
Now I wanted to put Windows Mobile 6.1 into my PDA..
1) Which is the best combination of Hard SPL + Radio + ROM to put onto my mobile. Can you please provide links here.. I got totally lost on the forum..
2) If I flash and something goes wrong, or if later I want to put it back with its original ROM (found on the HTC website), is it possible to do?
3) Any other things I should know before flashing the three things mentioned above
4) Anything else you guys will recommend to put in to the mobile.
Thanks in advance u guys

http://www.trinityguides.info/index.php

idrisito said:
http://www.trinityguides.info/index.php
Click to expand...
Click to collapse
seen that guide.. but does the Hard-SPL contain the ROM also?? can u gimme link to the best stable WM6.1 ROM for P3600i

khandu said:
seen that guide.. but does the Hard-SPL contain the ROM also?? can u gimme link to the best stable WM6.1 ROM for P3600i
Click to expand...
Click to collapse
NO the Hard SPL for P3600i (search for the thread) is only the Hard SPL.
As for ROM's it comes down to personal choice. There is a specific thread for P3600i ROMs that work, that is the best place to look....read...and make up your mind from there.

Andych said:
NO the Hard SPL for P3600i (search for the thread) is only the Hard SPL.
As for ROM's it comes down to personal choice. There is a specific thread for P3600i ROMs that work, that is the best place to look....read...and make up your mind from there.
Click to expand...
Click to collapse
What about question 2??
its tough to get to know all those ROM.. can u suggest a few
thanks

OK:
1. Use the flashing tutorial at the top of the "Trinity upgrading" thread.
2. Flash with a ROM from the P3600I Rom Collection thread in the "Trinity Mobile 6" subforum.
Prob best to just go with the 31XiTNY ROMs as a good start... from there you can either decide to CBF and stick with it or try a few different ones... depends how keen you are on this stuff.
As for the risk of screwing things up, your only risk is first getting HardSPL on... if you can get that on and working fine, then a screwed-up ROM flash won't be an issue, you just start over again.
HardSPL has had over 1000 downloads from this week, and no one yet has reported having trouble flashing their P3600i, so I doubt you'll have any issues I know the first time I got into this I was ****ting myself wondering whether I made the wrong choice, but everything completed fine
Of course, you can never tell what will happen, etc. etc. lol so yeh up to you, but the benefits are definitely worth the risks lol

joncgde2 said:
HardSPL has had over 1000 downloads from this week, and no one yet has reported having trouble flashing their P3600i,
Click to expand...
Click to collapse
Funny you say that when people keep asking for a working HARD SPL for some of the P3600i because it simply doesn't work on all P3600i.
Did you miss that?
Robert

demon83ft said:
Funny you say that when people keep asking for a working HARD SPL for some of the P3600i because it simply doesn't work on all P3600i.
Did you miss that?
Robert
Click to expand...
Click to collapse
4 people out of over 1000 downloads isn't a big percentage. That and the fact that the OP is based in Australia and all of the australian P3600i from HTC work with Hard SPL (as far as we know) put the comment into context.
It is unfortunate that there are some out there who are not able to complete the HardSPL flash, but there isn't a lot that can be done. If you guys are adamant that the phone is a P3600i and the standard WWE ROM lashes ok on it then it should work with the HardSPL from Olipro.

Andych is right...
Plus now downloads are up to 1119 for HardSPL... 4 problems out of 1119 is something like 0.3%... so 99.7% have had NO problems.
I'd dare say that's statistically insignificant, and that the likelihood of this being a problem with HardSPL itself is low... or possibly some P3600i's are incompatible, unfortuneately - either way, if 99.7% of users have had success, I'd say that's pretty much everyone.

Ok..
So for
Hard SPL: I use Olipro 1.30
Radio: I use v1.56.70.11
ROM: any mentioned here on the thread ( http://forum.xda-developers.com/showthread.php?t=399779) recommended 31XiTNY
Is that right??
Also someone was telling me about Soft SPL. He has used it in his Herems. Does that work for us?? and how does it work?

Thanks for you statistics lesson ..
I understand your point of view guys .. but if one day you will be in this 0.3%
and everybody will keep tapping you on the back saying "sorry, it should work.." .. we will see how nice will be me calling you "statistically insignificant"
Robert

demon83ft said:
Thanks for you statistics lesson ..
I understand your point of view guys .. but if one day you will be in this 0.3%
and everybody will keep tapping you on the back saying "sorry, it should work.." .. we will see how nice will be me calling you "statistically insignificant"
Robert
Click to expand...
Click to collapse
Robert....trust me....for 12 months we WERE the 0.3% so we know your frustration. The problem is that most of us flashed the HardSPL 3 months ago and as it is a Flash once operation it is impossible to replicate the errors you are having. The other difficult part is the that the Supreme genius Olipro who gave us the HardSPL is not fully engaged in his Diamond projects so I doubt he has either the time or the inclination to offer any assistance....sad, but that is the way life is.
I will re-read the problems you and the pther couple of psters are having and see if there are any other things you can try. I do remember though that you all had slightly different Error Codes, which is a concern.
Anyway, hang in there, I won;t get a real chance to read and digest the info before the weekend....but I will do it and post back in that thread.

Andych said:
Robert....trust me....for 12 months we WERE the 0.3% so we know your frustration. The problem is that most of us flashed the HardSPL 3 months ago and as it is a Flash once operation it is impossible to replicate the errors you are having. The other difficult part is the that the Supreme genius Olipro who gave us the HardSPL is not fully engaged in his Diamond projects so I doubt he has either the time or the inclination to offer any assistance....sad, but that is the way life is.
I will re-read the problems you and the pther couple of psters are having and see if there are any other things you can try. I do remember though that you all had slightly different Error Codes, which is a concern.
Anyway, hang in there, I won;t get a real chance to read and digest the info before the weekend....but I will do it and post back in that thread.
Click to expand...
Click to collapse
If you wish I can provide IM and desktop sharing so that you can watch how I do it ... maybe it is us who do it wrong .. I am newbie in flashing but I have 10-12 years of PC experience .. so I doubt I can't follow a simple guide ...
PM me when you have 10 minutes and maybe we can sort this out ...

Question before flashing my device...

Hello all, first off this is the absolute BEST PDA forum around. And Ive found just about all information I need. I JUST NOW successfully HardSPLed my device! W00T! Ive looked around and cant answer my last question though, I want to use a rom that is a WM6.1 bc I want threaded text, ive currently got wm6 on my T-Mo Wing (Herald) or whatever you guys like to call it lol. Do I need to do anything before flashing the WM6.1 Rom? Any suggestions on what Rom to use? I really like the idea of touch flo! Any help is appreciated!

Okay, Sir.
First off all you should know that I'm kinda new to the XDA scene as well but I've manage to flash my device right at the first attempt. What you have to do is following:
1. HardSPL your device
2. Check bootloader if process was successful
3. Get the RUU and put your *.nbh into the RUU folder (Image)
4. Run ROMUpdateUtility.exe and follow the steps
That's it. Be sure to be ActiveSynced all the time!
Oh and for the ROM request: I can strongly suggest OpenTouch V7.7 Manilla2D - a pretty nice ROM imho.
If there are any questions left don't hesitate to ask
Cheers

i'll recommend the easier flash method, as long as you have a microSD card. you can download any rom image your wish to flash, and place it in the root directory of the sd card as HERAIMG.nbh (i beilieve. look it up, i haven't flashed in a while). just hold the camera button down as you turn on the device, and it'll load into bootloader mode. from there, just follow the instructions.
while opentouch and many other roms that already have many programs are nice, i always recommend the exact opposite. the best and fastest rom i have ever used is just2clean. it has tons of free memory left, and just the basics pre-installed. makes a great base to install just what you want, and easily be able to remove what you don't.

Awesome. Thank you both for the info! I think im gonna go with OpenTouch V7.7 Manilla2D. Ive seen youtube vids on it and it looks appealing.... Thanks again... Going to update as soon as i get off work =P. Will post if i have any problems. But maybe ill ask a last question, will OpenTouch V7.7 Manilla2D leave me much space left over after the flash?

Around 30MB afaik. If you need more space for apps etc. try the JustMe ROM with up to 70MB of free storage.
Cheers

Ok so i couldnt actually find the download link to 7.7, like i click on the 7.7 link in his sig, but couldnt actually fond the download. but i read clear thru the forum and found V7.3..... Successful install...Now I think im gonna try his windows vista beta. Thanks for the help!

Well, have fun at reflashing Here are the links to build V7.7
Click

Lol im d/l it now. Got sent home from work bc of power failur... yay. But where did u find the link? i looked ALL over lastnight. The Touch IT Vista Beta worked well but i was really wanting this Open Touch 7.7 so im flashing again! Once again thanks... See ya on the other threads!

It's there at the very bottom.
Mirrors:
This mirror pretty much has all roms from version 7.0 - 7.7 which is the most current.
Provided by coburn_c
Version 7.7 has been added and is in a folder called Version 7.7.
Click to expand...
Click to collapse
Cheers

i think i was blind lol. thanks again

You're welcome Let us know if it worked.
Cheers

Greetings from Brazil.
Hard-SPLed an HTC P4352 and flashed with Open Touch 7.7
Thanks.

Yea Zeheres, Everythings workin great..... I went with OTP 7.7 Lite.... LOVE IT! Thanks for your help. Lol now im usin your knowledge to help others =P

That's how it works Good it worked for you. Have fun with it
Cheers

How to flash ROM?

I just buy Touch HD few days, what the step I have to do if I want to flash ROM from you posted.
thx so much
And which ROM you think it is the best? =P
Would you like to recommend me?
thx so much =\

iambenz said:
I just buy Touch HD few days, what the step I have to do if I want to flash ROM from you posted.
thx so much
And which ROM you think it is the best? =P
Would you like to recommend me?
thx so much =\
Click to expand...
Click to collapse
You can't go wrong flashing one of the newer 1.56-based roms out now. If you read the guide in my signature you can't go wrong

As cRaCKwHoRe said you can't go wrong with one of the newer 1.56 roms based on either WM6.1 or WM6.5
As for which is better, your opening a whole can of worms there mate. This has been asked before and closed done just as often by Mod's
There is no best rom, its user dependant on what you as the user is looking for as they're lite roms, heavy roms, roms built for speed etc etc etc
Best advice I can offer is to go into each rom thread, read up on each and if you like the look of one of them, try it out. If your not happy, try another.
I've flashed countless rom's (60+) and I'm still not 100% happy.
Each rom thread should provide installation guides or direct you to them, though you couldn't go wrong with cRaCKwHoRe's
I'm personally testing Duttys V3.0 which isn't released yet, but should be in the next few days. Could be worth waiting for, though I'd maybe read up on others and try flashing to get accustomed to the process
Happy searching and I hope you find the right rom for you!!

Xperia X1 The best setup?

Hello!
This is my first post in the forum.
I recently got a X1 prototype to play with, im all new to WM Phones. So i dont know what to do and not to do.
What i personally feel is that X1 is kinda slow, but from what I've read I understand that some people has customized their own stuff for the phone to make it faster than it is with original firmware (or what its called)
My question to you guys/girls is: What is the best setup for the phone to make it run smooth but, what ROM should i use, if someone could put up a simple guide with links so what i need to download, the best roms, best appz.
Note that i dont want a GUI that looks like win 3.11. I still want it to look good. Not neccecearly with just spb shell.
Anyone that reccomend putting WM 6.5 into X1?
Anyway, the best stuff so the phone will run at its best!
That would be much appreciated!
Thanks in advance.
Edit: A list of "what to do" would be good, stuff i need to do before doing anything to the phone, to make sure i wont brick it.

Welcome .
I see that you are looking for the perfect setup and the easiest way of doing it, just like me, when I first came here. The short answer is that there is no such thing .
It all comes down to personal preference when WinMo is concerned. I can tell that you have read a bit, so my advice is to continue reading and do a lot of experimenting to see what you might like. You might like a stripped ROM that is blazingly fast and has only the basic features. You might want a slower, but fully stocked phone with every app available.
I can bet that if someone from the forum picked up my X1 he wouldn't like it and vice versa.
Maybe you should start with the ROMs that are specifically made for speed and smoothness and see if you like them. Just read the descriptions.
Cheers .

Hello! Thank you for your reply.
I almost figured that i would get a reply like yours. As we say in sweden: Smaken är som baken, delad = One mans meat is anothers poison. Ofcourse its hard to find the perfect setup.
But according to my directives (Going fast, but still pretty neat) As you said. Its either the basics = going fast, or a fully stocked = slow phone.
Isn't it something in between? A setup that contains both the basic features, but also some neat GUI.
And if someone has got any experience from WM 6.5 on xperia X1, please tell if it worked good.
Are they any ROMs more popular than others, if i put it that way....There must be something that a slight majority likes.

Is it even possbile to do something with a prototype?

Fructis said:
What i personally feel is that X1 is kinda slow, but from what I've read I understand that some people has customized their own stuff for the phone to make it faster than it is with original firmware (or what its called)
Click to expand...
Click to collapse
Your problem might also be hardware, rather software. Prototypes usually don't have the same "guts" as their commercial, mass produced siblings. Some have less RAM, or a slower processor, or less internal memory, etc.

harveydent said:
Your problem might also be hardware, rather software. Prototypes usually don't have the same "guts" as their commercial, mass produced siblings. Some have less RAM, or a slower processor, or less internal memory, etc.
Click to expand...
Click to collapse
Im with you there. Its not the first proto i have, so im aware that hardware may not be the same as retail. But still..firmware can do much, eventough ram is lesser than the retail (256) I have R1A at the moment.
I will post some device info. Just so you know whats inside the phone.
Rom-Version: 1.02.936.3
Rom-Date: 08/29/08
Radioversion: 1.06.25.29
Protocall version: 52.43.25.24U
CPU: QUALCOMM(R) 7200A
Clock: 528 MHZ
RAM-Size: 256 MB
Flashmemorysize: 512 MB
Database: 32 Bit
StorageSize: 281.58 MB
Bluetooth-Version: 2.0/2.0+EDR
Firmware: R1AA017

ah yes the R1A firmware. that's what i had on my X1i when i first got it. when i upgraded to the R3A....it was BEYOND the difference between night and day. it was like night vs standing on the sun.
to get the ball rolling, i would recommend getting the Sony Ericsson Update Suite from their website, and updating the phone through their automated system. it will bring you up to date on the R3A rom and it's painfully easy, so it will give you a taste of what's to come...

asayamalaka said:
ah yes the R1A firmware. that's what i had on my X1i when i first got it. when i upgraded to the R3A....it was BEYOND the difference between night and day. it was like night vs standing on the sun.
to get the ball rolling, i would recommend getting the Sony Ericsson Update Suite from their website, and updating the phone through their automated system. it will bring you up to date on the R3A rom and it's painfully easy, so it will give you a taste of what's to come...
Click to expand...
Click to collapse
If you didnt know this or just didnt read my post carefully, it said that its a Prototype im using. And SEUS doesn't accept them. It just say that im already using the newest firmware.

Fructis said:
If you didnt know this or just didnt read my post carefully, it said that its a Prototype im using. And SEUS doesn't accept them. It just say that im already using the newest firmware.
Click to expand...
Click to collapse
Try reading this thread first as this is the 1st thing that you need to do for flashing a new ROM: http://forum.xda-developers.com/showthread.php?t=431218
Afterwards, try reading this thread as this is where you will know how or ways to flash a ROM http://forum.xda-developers.com/showthread.php?t=445662 ( I suggest that you use this method as, as you said you can not use SEUS.
I suggest that you try the following ROM's as they are, imho, the fastest and best, so far http://forum.xda-developers.com/showthread.php?t=524043 and http://forum.xda-developers.com/showthread.php?t=512050 (Try the latest build).
Have fun!

laurence0609 said:
Try reading this thread first as this is the 1st thing that you need to do for flashing a new ROM: http://forum.xda-developers.com/showthread.php?t=431218
Afterwards, try reading this thread as this is where you will know how or ways to flash a ROM http://forum.xda-developers.com/showthread.php?t=445662 ( I suggest that you use this method as, as you said you can not use SEUS.
I suggest that you try the following ROM's as they are, imho, the fastest and best, so far http://forum.xda-developers.com/showthread.php?t=524043 and http://forum.xda-developers.com/showthread.php?t=512050 (Try the latest build).
Have fun!
Click to expand...
Click to collapse
Haha, thanks!
Nice that a Pinoy wanted to help

laurence0609 said:
Try reading this thread first as this is the 1st thing that you need to do for flashing a new ROM: http://forum.xda-developers.com/showthread.php?t=431218
Afterwards, try reading this thread as this is where you will know how or ways to flash a ROM http://forum.xda-developers.com/showthread.php?t=445662 ( I suggest that you use this method as, as you said you can not use SEUS.
I suggest that you try the following ROM's as they are, imho, the fastest and best, so far http://forum.xda-developers.com/showthread.php?t=524043 and http://forum.xda-developers.com/showthread.php?t=512050 (Try the latest build).
Have fun!
Click to expand...
Click to collapse
I totally agree - I run the Valkyrie ROM and it's absolutely amazing! I will recommend flashing it any day. One of my co-workers has the same ROM, and he's also amazed.
One thing to notice: If you're from Sweden, you might want to stay clear of the Manila versions. For me (from Denmark) I can't run the Danish keyboard settings while running Manila, and that's a total deal-breaker. After all, you want to take advante of full QWERTY, right?
Manila is what you might know as Touch Flo from HTC phones. IMO you should avoid that, go with Valkyrie's Xperio ROM (without Manila) and use the SPB panel (free). Then you have a really strong setup!
But hey - that's just me

millen said:
I totally agree - I run the Valkyrie ROM and it's absolutely amazing! I will recommend flashing it any day. One of my co-workers has the same ROM, and he's also amazed.
One thing to notice: If you're from Sweden, you might want to stay clear of the Manila versions. For me (from Denmark) I can't run the Danish keyboard settings while running Manila, and that's a total deal-breaker. After all, you want to take advante of full QWERTY, right?
Manila is what you might know as Touch Flo from HTC phones. IMO you should avoid that, go with Valkyrie's Xperio ROM (without Manila) and use the SPB panel (free). Then you have a really strong setup!
But hey - that's just me
Click to expand...
Click to collapse
Great, thanks for the info, i was kind of unsure what version of a rom i should install

If you're still feeling your way around, install the official Sony Ericsson R3A ROM. No need to Hardspl, and you'll still have the same interface that you're used to.

I cant install R3A :S
It says "No image found" bootloader.
And the card is FAT32, and the file is named Kovsimg.nbh
And yes, its placed in the root of the Card.

Fructis said:
I cant install R3A :S
It says "No image found" bootloader.
And the card is FAT32, and the file is named Kovsimg.nbh
And yes, its placed in the root of the Card.
Click to expand...
Click to collapse
First of all: If you want the original firmware, don't take it from XDA - take it from the SE official program.
Second: If you want to install a cooked ROM, first run HardSPL. This only works in some of my USB-ports, and only without inserting the memory card.
Once HardSPL is installed, you need the Kovsimg.nbh file...
Hope it helps

millen said:
First of all: If you want the original firmware, don't take it from XDA - take it from the SE official program.
Second: If you want to install a cooked ROM, first run HardSPL. This only works in some of my USB-ports, and only without inserting the memory card.
Once HardSPL is installed, you need the Kovsimg.nbh file...
Hope it helps
Click to expand...
Click to collapse
How am i supposed to get it from SE's Official program when its not supporting prototypes?
Do they have a site where you can download them manually?

Fructis said:
How am i supposed to get it from SE's Official program when its not supporting prototypes?
Do they have a site where you can download them manually?
Click to expand...
Click to collapse
Try here:
http://forum.xda-developers.com/showthread.php?t=475482

Oobly said:
Try here:
http://forum.xda-developers.com/showthread.php?t=475482
Click to expand...
Click to collapse
Already got that one...but its not working
Thanks anyway.

For X1...

I just want a ROM that is:
1. Unintsallable
2. Fast, stable and glitch-free.
3. Panel install only
4. Should only require soft-reset
5. should look exactly like HTC's interface
6. Landscape mode preferred.
As you may have guessed, im a noob. But I just wanted to know as there is like a sea of ROMs and it becomes very difficult for a person not very knowledgable like me to pick one. I just want 2 things most importantly, that it shud be panel-installable and shud support landscape mode, along wiht being stable.
Thanx a ton guys!!

I don't understand your 1st and 3rd point. All roms can be replaced.
I personally dislike having Touchflo as is a bit unstable for me. If you want 6.5 I've used this for weeks, the barebones version, link and its been pretty stable on me.
Read other threads asking about rom choices too, http://forum.xda-developers.com/showthread.php?t=590874

sweet..by
1. i meant it can be uninstalled if it gives some problem...(i raed sumwhere its a pain to remove it from ur system)
and
3. by that i meant, that it is only installed in a panel, not in the whole sys..as in i dont want the OS to change, i want X1 OS but only one panel can be HTC's touch flo

circleofomega said:
I just want a ROM that is:
1. Unintsallable
Umm.....why?
2. Fast, stable and glitch-free.
Use a stock ROM or cook your own.
3. Panel install only
4. Should only require soft-reset
5. should look exactly like HTC's interface
Get an HTC phone then.
6. Landscape mode preferred.
User Manila 2.1
I just want 2 things most importantly, that it shud be panel-installable and shud support landscape mode, along wiht being stable.
Thanx a ton guys!!
Click to expand...
Click to collapse
Read what I typed above in red.

tahnx Im Packing...
though i get your humour(and frustration with the number of noob questions being asked everyday)
but plz understand, I am an original noob. I dont understand wht u mean by "cook your ROM"
also, the very fact i have posted this Question, is that there are so many ROMs.
Like see, there are many ways to run a Mac on ure PC (iAtkos, Kalyway etc) but I used Kalyway..so here i cant find my Kalyway...
is ITJE's ROM good??heard about it...
plz suggest specific ROM so that i dont have to do a lot of RND with my (brand new) phone...thanx a lot once again.

Here is my suggestion for you. Just try a rom for one week and see which one fit you the best. It's very easy ans SAFE to install new rom and every rom has it plus and minus. I personally install different rom every other date because i want to have the newest stuff for my phone.

I think you misunderstand what ROMs are. I think you should read the Wiki first. Then read the stickies. Then if you have questions try searching first, and then you should fire away with questions.
The questions you are posing now are not ROM related they are software related. If you really want to flash a ROM then you should first read what a ROM (Read-Only Memory) is and why you would want to flash one and what HARD-SPL is and how to prevent bricking. If you are not ready for a custom ROM then perhaps you should just stick to some of the many cabs that are available here.
Hopefully this will give you a starting place. Just opening a thread to ask nonsensical things is not going to be productive for you, and will only confuse or irritate more experienced members. If you have a basic understanding everything should fall into place after that. Good luck.

Thanx Hannigan174..i appreciate ure help and apologize for posting this Question. u are right, i actually dont understand what ROMs are in trems of X1....
But i wil take ur suggestion...i wil first try out diff ROMs and then post a query...

I understand what you want: a theme or a application not flash your phone with another ROM, is it?
Try check this out... and this ... also try this
Also you may check this one and this
Good luck

i wil save all u guys some trouble:
this is what i want.....
http://www.youtube.com/watch?v=aLnZ8sylxAc
what this guy has on his phone, is exactly how i want my X1 to look like...it has panels also and it has the X1 OS as well...thanx a lot guys!!
plz send me a link if u guys can find out what ROM he is using here...

circleofomega said:
i wil save all u guys some trouble:
this is what i want.....
http://www.youtube.com/watch?v=aLnZ8sylxAc
what this guy has on his phone, is exactly how i want my X1 to look like...it has panels also and it has the X1 OS as well...thanx a lot guys!!
plz send me a link if u guys can find out what ROM he is using here...
Click to expand...
Click to collapse
did you ever flashed youre phone? there are alot of roms just like the one in the video. just pick a random manila 2.1 rom and ure done. i dont know why u want tf3d be uninstallable. u can just deactivate it. what means "should only require soft reset"? u dont want to flash ure phone but install tf3d via cabs instead? well then search for the thread, it is possible but aint that good and fast as a complete optimized rom

circleofomega said:
i wil save all u guys some trouble:
this is what i want.....
http://www.youtube.com/watch?v=aLnZ8sylxAc
what this guy has on his phone, is exactly how i want my X1 to look like...it has panels also and it has the X1 OS as well...thanx a lot guys!!
plz send me a link if u guys can find out what ROM he is using here...
Click to expand...
Click to collapse
Why not save us the trouble and read the wikis and guides instead?

circleofomega said:
i wil save all u guys some trouble:
this is what i want.....
Click to expand...
Click to collapse
what you see is the Manila user-interface, can be any ROM currently had it cooked unless stated differently. And it can be of 2.1 or 2.5 (Leo), and installable under pure or clean rom.
Just read the stickies first under the Sony Ericsson Xperia X1 ROM development thread. First step, you're going to need to flash HardSPL, then flash any ROM you like with the Manila interface.
This/URL] is one of the example, always read last pages to see the current issues on the latest build, then pick your choice

thanx a lot deep throat...i wil try out different ROMs and see which is the best. Also, i just got my X1 and it has 9 movies..but i can unlock only 1....can i be a little greedy and unlock atleast 2[my GF wants to see Zohan and I want to see Da Vinci...u know how GFs are...]
plz any help is appreciated..

circleofomega said:
thanx a lot deep throat...i wil try out different ROMs and see which is the best. Also, i just got my X1 and it has 9 movies..but i can unlock only 1....can i be a little greedy and unlock atleast 2[my GF wants to see Zohan and I want to see Da Vinci...u know how GFs are...]
plz any help is appreciated..
Click to expand...
Click to collapse
I dont really get it... what did you mean by unlocking ? and what 9 movies?

my micro SD card has 9 movies...MIB, da cinchi code..etc... can unlock it..i have a Sony Pictures app also..it lets me see the trailer of each film and then i can unlock the whole film..and watch it

the more i read, the more im gettin confused...there is this software on one hand cutsomRUU...
then there is a cab availbale, then there is also the hardUSPL or something...
this is just getting more complicated, im eading the sticky threads but to no avail....can any1 plz help me how to get whats in the video..step by step with links...plz, its a humble request...

everything is explained in this sticky thread. just follow the steps. do a backup of your important data before u start
http://forum.xda-developers.com/showthread.php?t=446070
but i really think u have no clue what u are facing by flashing ure device. every data on youre phone (not those on youre storage card) will be lost and all the programms u installed will be gone so u have to reinstall them after flash. by flashing ure device u will completely remove everything thats on ure phone and relace it with the new rom. did u ever updated youre device via seus?
the sony pictures app will be gone also and then u probably will not be able to watch your movies u have on youre card. unless u have this as a cab somewhere.

I've always recommended SPB Warehouse Backup. I made a thread, though nobody commented on it...but IMHO, and I gtrab and Siruis [X] are now using them, it's the best backup/restore program out there. It allows you to restore all your PIM and programs after flashing your phone.
The trial allows you to use it for 5 times before having to purchase a license. It's well worth it as custom ROMs are coming out every couple days or so, it saves time, effort, and the frustration of having to constantly restore your phone manually.