Related
Hi.
I don't seem to last a day without recharging my battery (either by USB or Outlet).
I have some useful programs but I'm afraid to use them sometimes because my phone wont last the day.
On a regular day, without extreme program usage (WiFi, GPS, games etc), just regular phone calls (GSM not 3G), my battery power lasts maybe 18 hours.
If i used 1/4 of my installed programs moderetely, my battery power lasts for about 10-12 hours.
I would like your professional advise to better by battery life.
1. Would changing my ROM to a better modified one solve my issue?
2. Is there a backround process (that is not detected my my task manager) working that I should know about?
3. Are there any tweaks (non registry) that I can do to better the life?
4. Are there any registry fixes that can be done to better the life?
5. Do third party cabs (SPB etc.) drain the battery life even if they are idle?
6. Does letting my battery fully drain and then fully charging it over and over really help the overall battery life?
FYI: I have the OEM ROM, my phone had never been Hard reseted before
I have tried all sorts of things, but I cannot manage to get my phone to last more than a day.
I would really appreciate your advise.
Thanks.
P.S please dont tell me that you people go 2-3 days without charging (that would hurt my feelings )
my kaiser lasts about 10 hours if heavily used, I mean 3G internet always on, browsing with opera mini all while listening to MP3s..
With normal usage and 3G coverage (but classic talks, not video ones) it last al least 2 days..
that's strange
Hi,
i managed to have good power after alot of research and tweaks on this forum.
-disable 3g service
-make sure no application auto-enable wifi, make sure its off.
-make sure device is set lock all buttons
on normal days with just afew calls and very little surfing, i my battery life is the same as other non-pda phones!
boojingyou said:
-make sure device is set lock all buttons
Click to expand...
Click to collapse
What do you mean with locking all the buttons?
Would updating my RADIO help?
bluemamba said:
Would updating my RADIO help?
Click to expand...
Click to collapse
Default ROM sucks. The registry is setup completely ineffecient (like all M$ software) so eats capacity and battery.
Best thing to do is check the 'Kaiser upgrading' thread and compare the radio version you have with what's posted there and see if you could improver performance. I'm still on the original radio that it cam with, but trying multiple Rom's dramatically improved battery life. That and speed and performance. Their is much to gain, my friend.
I advise you read the articles about CID and SIM unlocking before attemting to flash anything.
Upgrade your radio to 1.27.12.17/32, turn off 3G and flash some clean ROM (like Q-Mobile - see in my signature )
My phone can survive now more than 3 days on normal usage. Before it could live 2-3 days max.
Maybe can you enable alimentation tweaks with KaiserTweak to begin ?
MickyMax said:
Maybe can you enable alimentation tweaks with KaiserTweak to begin ?
Click to expand...
Click to collapse
I dont think and fixes of those kind will do anything
I think what Maarten_0031 and gabriel31337 say is the obly way. I will reseach what kinda ROM best fits my need and let u know
I'm using Schap's and very happy with it...
MickyMax said:
I'm using Schap's and very happy with it...
Click to expand...
Click to collapse
On average, how long does your bettery last?
2 / 3 days... Some phone calls, wifi and 3G
Much better than the HTC ROM !
MickyMax said:
2 / 3 days... Some phone calls, wifi and 3G
Much better than the HTC ROM !
Click to expand...
Click to collapse
Very nice. I think i might try that.
Topic Title said:
Battery Power Poor. Any advise?
Click to expand...
Click to collapse
Spell correctly, charge it.
tag 4 later
tyeo098 said:
[qoute=Topic Title;1839477] Battery Power Poor. Any advise?[/qoute]
Spell correctly, charge it.
Click to expand...
Click to collapse
qoute?
You spell correctly and keep to the topic
Just got my Kaiser yesterday. Left it to charge all night and removed it by 7:30 am. At 16:00, battery shows 14% left?!?!?!?
What the heck?
Did all the power tweaks from KaiserTweak.
Lets see how it goes without 3G and with the tweaks I did today.
ROM: 1.81.415.4 WWE
Radio 1.27.15.32
Protocol: 22.51.88.13H
it can't be stated enough how quickly your battery will die if you have your mailboxes checking for new mail 'as they come in' or 'every 5 minutes', etc. if you have important emails your expecting then turn it to those settings, but if you don't care if you get your mail only every hour then go that route - it makes a big difference in the battery life.. also make sure you have the disconnect option in kaiser tweak set on - i have mine set at disconnect after 2 minutes.. and finally, if you can get away with using edge then have your phone always set to edge and only set to 3g for web surfing - pulling down your text based email in edge and not 3g is usually a pretty negligible difference.
on a side note, i bought a 3000mAH battery for about $70.. it improves the battery life a decent amount, but the reality is is that if you use the GPS for 2-3 hours without having it plugged in while using the GPS then you can always expect the battery to be dead by the end of the day (or sooner).. if your going to use it as a GPS then have it plugged in..
its all about wifi...turn it off if not needed.
This has been discussed in many previous threads.
All the above are applicable and also get rid of any fancy today plugins that show data state (WiFi-phone) and battery condition as they are constantly running and polling the relevant devices.
You will see a VAST difference when you do that.
Hi all,
I have installed the WM6.1 ROM 6.1.2a16CS by C. Shekhar on my qtek2020.
It is very cool and gave a second life to my qtek. I am just a bit surprised by the duration of the main battery. It is running out of bat very fast.
As I haven't used my qtek for month before installing the new ROM, I can't tell if it's a battery problem or because this new ROM is consuming more resources. Have you noticed such behavior on your machines?
For further info I am not using my qtek as cell phone. I am thinking about using it back as a phone, but I have first to fix this battery aspect.
Moreover I have read s/t about a battery fix, that I haven't installed yet. Can s/o tell me more about this fix and what it is doing?
Anyway this ROM is a great one.
Thx for your answers
Marc
I dont know about the battery fix but i have never installed any sort of fix like that either for wm5 or wm6.x. Are you sure there isnt some background process that keeps on continuously running? It could be a battery problem if the battery had discharged alot during the non-operational period. I changed by himas battery about 7-8months back because the last battery had gotten abit too old and was discharging very quickly.
i think you are talking about SD card fix..its a registery fix that makes the battery consumption by SD-card low
well, WM5 and WM6.x IMHO are battery consuming ROMs, i can attest to this,
experiment no. 1:
same xda, same battery (1200mAH original battery)
-with WM2003SE at normal use, XDA turns off approx after 36 hrs of use including standby.
-with WM5 and WM6.x, XDA turns off WM5-18hrs, WM6.x-25hrs of use including standby.
experiment no. 2:
two xda, different OS, both with brand new 3600mAH extended life battery.
in 1 day (at heavy texting use from 7am to 7pm):
WM2003SE XDA2 - battery from 100% to 58%
WM6.X XDA2 - battery from 100% to 35%
possible explanation:
WM6.x (WM5) uses more CPU time and Memory resources, plus it probably uses more power in maintaining the persistent storage, hard and soft reset persistent memory.
MODS PLEASE REMOVE THIS POST
ather90 said:
i think you are talking about SD card fix..its a registry fix that makes the battery consumption by SD-card low
Click to expand...
Click to collapse
Ather, is this fix already in all/most recent releases? If not, can you give us a link? Never heard of it.
I have no battery problems, quite the contrary. My battery life is amazing me. To be honest I tweaked a lot when I started using WM6.x, too much to remember, too much to tell you.
but some parts:
I don't need 24/7 phone connection, Phone Alarm takes care of this for me
Use a bare minimum of today plug-ins
Avoid animations
Close programs except when you seriously do need them in the background
Heya Maggy...its long time since i saw u here.. think maybe month
welcome back ny ways
well that fix was in the Imate website..i have it
having some problem attaching on xda : http://www.2shared.com/file/3591354/873d3f18/SD-Card_Patch.html
In need to know the voltage across the diamond standard battery (900mAh) when the battery is fully charged and when the battery is fully discharged (the phone automatically switched off)
Could someone give me this information?
When my battery is low I read 3.2V
When my battery i high I read 4.1V
Is this correct?
That's about right, +-.1
Thanks, I've a lot of problems with the charging and discharging cicles, this information could help me to understand
While which is the charge current when the battery is fully discharged?
For my Diamond it can be very high, up to 800mA (I know it from BatteryStatus), it is a normal value?
wasm said:
While which is the charge current when the battery is fully discharged?
For my Diamond it can be very high, up to 800mA (I know it from BatteryStatus), it is a normal value?
Click to expand...
Click to collapse
Try a program, "PowerGuard", it's a very nice (and free) program developed by Muyz that will give you current and temp info, including graphs with a lot of flexibility in settings. You can get a good feel of where the current draws are. I think charge current is in the area of 700-800mA on initial charge.
Or another called Battlog. It,s better because it logs the measurements - on Powerguard it's difficult to see the actual (current, not in electrical, but in time sense ) measurement.
Thanks I'm going to try them
For now I'm testing Batlog...
This evening I'm going to make a full charging log, so I could post it tomorrow
Could you do the same? This could give me the possibility to compare them
I'm experimenting some problems with the charging circuit
mjaxa said:
Or another called Battlog. It,s better because it logs the measurements - on Powerguard it's difficult to see the actual (current, not in electrical, but in time sense ) measurement.
Click to expand...
Click to collapse
I agree with mjaxa, since your post I've found and installed Battlog. Works great on my Diamond. Very robust program and easy to read the log file or import into excel for analysis.
I have no idea why I didn't find this software when searching for a good battery monitor for my Diamond except I must have not used "log" in my searchs.
Thanx mjaxa.......
JRMX said:
Works great on my Diamond. Very robust program and easy to read the log file or import into excel for analysis.
Thanx mjaxa.......
Click to expand...
Click to collapse
I should, of course, also thank Palladium TD now that I've found the source for this fine program.
I'll also add that while the data logging is very good, I found that some of the functions do not work on my Diamond (US ROM 1.93). I know it's a beta program or maybe I just haven't figured it out yet. Using 0.2.3.130 beta I have noted:
No response on the help and other icon on the left side, battery temp read is off by a factor of 10 (noted on the Battlog thread) and cum use (mAh) does not display.
I'll post the comments on the correct thread.
In the following I reported the log of my battery charging cycle in txt and graphic format
If you can post comments or other logs, I'll appreciate
P.s. another bug in Battlog (I'think) is related to the sampling interval, as you can note observing the X axis on my plots: it is not constant in time
No one want help me with a charge/discharge log?
With the holidays I haven't had too much time to work with battlog and the phone use is not typical. I did run about 16 hrs of data and it does give some insight.
Charging overnight looked normal with current draw cycles at 2hr intervals for mail checks.
I was going to upload the excel file, but the format isn't permitted. The txt file is too large. I'll mess with it some more, but I didn't see anything that was unlike your data. 800ma on initial charges, -200ma on using various applications and phone calls, as much as -800ma on internet use and -9 to -20ma on locked standby. I did not see what I'm looking for which is an unexplainable deep discharge, overnight or during the day, I'll keep monitoring.
Ok, so ever since I upgraded to CM6 (which I LOVE) I've had serious battery issues and I've tried to fix it by installing Pershoot's kernel and I have SetCPU to underclock in depending on what battery life it's at. Also, I've wiped my battery stats and I've calibrated my battery already.
Today my battery was at 64% after only 3hr and 26min. I don't have GPS on, auto backlight is on, 3g/2g and sync are on. If it makes any difference I have the Korean radio installed (which btw improved my reception a lot! ). After about 9hrs and half, my nexus one died. As per usage, I wouldn't say it's much at all because I'm in class most of the time and I've only talked on the phone for about 1 min, browsed a few websites, and sent only a few texts.
I keep reading on the forums about how people are getting 1-2% lower per hour while on standby but the % I reported earlier, my battery's draining at over 9%/hr!
I really just want to be one of those people that can say that "I still have 50% left after 12 hours!" lol
So, is there anything else I can to increase battery life? Is my battery just crap? Any recommended setCPU profiles?
If you're one of the users that get really good battery life from your Nexus One, please tell me what you did to get it that high! Thanks!
Don't use setCPU to manage battery life, only to overclock. It overrides the kernel's settings. Sounds like you need to wipe and flash the rom again. Then gradually add applications you want, something is sucking battery life.
Last, buy a new battery.
CM6 has less than stellar battery life. If you check the "help with my battery life" type threads, you will see most of the OP's have CM6 as their ROM. Try another ROM, you will get better results.
adambenjamin said:
CM6 has less than stellar battery life. If you check the "help with my battery life" type threads, you will see most of the OP's have CM6 as their ROM. Try another ROM, you will get better results.
Click to expand...
Click to collapse
Quoted for lies
I'm using CM6 and I get between 22-32 hours on a single charge. I just use the kernel that comes with it and i almost always have sync on. No GPS or bluetooth though.
Are you using a battery you purchased on ebay? Or are you using the stock battery? ebay batteries last me about 9-12 hours and die. The stock battery is amazing
Exactly the same situation as you:
CM6.
N1.
Student.
Experiences massive drainage in short amounts of time with low usage.
Tried everything.
I'll now be trying Enomther, because yes I have heard CM6 users get worse battery life.
Just a viewpoint on what I'm facing. For the past week I've gone to bed with 100% battery and woken up ~7 hours later on 75%. I've tried WCDMA and GSM auto settings and neither male a difference.
evilkorn said:
Don't use setCPU to manage battery life, only to overclock. It overrides the kernel's settings. Sounds like you need to wipe and flash the rom again. Then gradually add applications you want, something is sucking battery life.
Last, buy a new battery.
Click to expand...
Click to collapse
Thanks for the advice! I'll be looking into this!
KAwAtA said:
I'm using CM6 and I get between 22-32 hours on a single charge. I just use the kernel that comes with it and i almost always have sync on. No GPS or bluetooth though.
Are you using a battery you purchased on ebay? Or are you using the stock battery? ebay batteries last me about 9-12 hours and die. The stock battery is amazing
Click to expand...
Click to collapse
I'm using the stock battery so I don't know what the problem. I just ordered another official stock battery though yesterday and I'm going to see if there are any differences.
Forge94 said:
Exactly the same situation as you:
CM6.
N1.
Student.
Experiences massive drainage in short amounts of time with low usage.
Tried everything.
I'll now be trying Enomther, because yes I have heard CM6 users get worse battery life.
Just a viewpoint on what I'm facing. For the past week I've gone to bed with 100% battery and woken up ~7 hours later on 75%. I've tried WCDMA and GSM auto settings and neither male a difference.
Click to expand...
Click to collapse
Thanks, I'm glad I'm not the only one with this problem. I thought I was being an idiot by doing something wrong...
I've calibrated my battery several times already while trying to fix this issue. Could that have killed my battery life?
1) Discharging the battery below 10-15% is bad for the battery, doing it many time will destroy the battery, making it last just about nothing.
2) Check CPU usage - download System Monitor or some other app like that, and check the running frequency of the phone. When you just run the program and don't touch the phone, it should float around 300 MHz. If you have it locked on 998MHz - you have an app that got your CPU stuck in a loop.
3) Download some app that stores battery stats, and check your discharge current and battery capacity - that way you'll know if it's your battery dead or your apps drawing the juice.
Sorry, double post.
Jack_R1 said:
1) Discharging the battery below 10-15% is bad for the battery, doing it many time will destroy the battery, making it last just about nothing.
2) Check CPU usage - download System Monitor or some other app like that, and check the running frequency of the phone. When you just run the program and don't touch the phone, it should float around 300 MHz. If you have it locked on 998MHz - you have an app that got your CPU stuck in a loop.
3) Download some app that stores battery stats, and check your discharge current and battery capacity - that way you'll know if it's your battery dead or your apps drawing the juice.
Click to expand...
Click to collapse
crap, all the guides that i've read regarding calibration told me to discharge it completely.
My CPU usage seemed normal. It was stable at around 245 and would jump up to 998 from time to time that doesn't last for more than half a second though.
My battery seems to be in good condition as it's labeled as "healthy" by my battery apps and the voltage seemed normal....
lol at this thread...
http://forum.xda-developers.com/showthread.php?t=714184
Do a nandroid back-up of CM6, and then try out the above ROM. You can always go right back to CM at any time.
For calibration, complete discharge is necessary. Doing it once is not too harmful. As long as the battery is reported "healthy" - you're ok.
There are apps that will show you the approximate capacity of your battery in numbers. Try to find one like that.
Please check discharge current and voltage over time. It doesn't make sense that a phone on 245 MHz in sleep mode will draw the current required to discharge 10%/hour.
in same boat as OP
im in the same position as the OP
student.
dont use phone for nearly 7 hrs a day
backlight on lowest, gps and bluetooth off.
ive been looking around for answers (hence why im reading this)
when class gets out ive gone from 100% to nearly 65%
running cm6 and ive wiped battery,
about to switch ROM, maybe that'll help.
adambenjamin said:
lol at this thread...
Do a nandroid back-up of CM6, and then try out the above ROM. You can always go right back to CM at any time.
Click to expand...
Click to collapse
Thanks, I'll look at that ROM and check it out when I get time (probably this weekend).
Jack_R1 said:
For calibration, complete discharge is necessary. Doing it once is not too harmful. As long as the battery is reported "healthy" - you're ok.
There are apps that will show you the approximate capacity of your battery in numbers. Try to find one like that.
Please check discharge current and voltage over time. It doesn't make sense that a phone on 245 MHz in sleep mode will draw the current required to discharge 10%/hour.
Click to expand...
Click to collapse
Cool, thanks for the advice. I'll look for an app ASAP and report what happens.
Branden10 said:
im in the same position as the OP
student.
dont use phone for nearly 7 hrs a day
backlight on lowest, gps and bluetooth off.
ive been looking around for answers (hence why im reading this)
when class gets out ive gone from 100% to nearly 65%
running cm6 and ive wiped battery,
about to switch ROM, maybe that'll help.
Click to expand...
Click to collapse
Awesome, if you find a fix let me know please.
I haven't been able to do any of the suggestions yet but (when it comes to flashing) but I do have an update that might shine more light on this issue.
Today in class I noticed that my N1 was warm when it was in my pocket but nothing was running and gps and bluetooth was off. I checked the temp of my battery it was at 36.1C while it's usually at 30-31C when I'm not doing anything.
Also, I checked spare parts this morning and found that, while I was asleep, my N1 was not asleep for half that time but my screen on for only 4% of that time (probably from my messing with it before and a little bit after sleep).
I've checked to see if anything is running in the background that might lead to this but so far none of my apps should drain my battery that much while I was asleep.
Is this normal? Shouldn't my phone be mostly in sleep mode when I'm asleep since I'm not doing anything to it? As for the battery heating up, do y'all think it's a faulty battery or the fault of the OS?
Thanks again for all of y'all's helpful replies!
Is this normal? Shouldn't my phone be mostly in sleep mode when I'm asleep since I'm not doing anything to it? As for the battery heating up, do y'all think it's a faulty battery or the fault of the OS?
Thanks again for all of y'all's helpful replies!
Click to expand...
Click to collapse
About battery heating...
I checked and mine is at 75-78F while in class. My n1 is also in a case, so for it to be that low is good. Just thought to throw that in as a comparison.
Also i've switched ROMs to help with battery, no luck there. Still experience 7-8% drop per hour.
I've been keeping my phone off now at school, which has helped, though I still lose nearly 15% while it's off.
Sent from my seXus One using XDA App. While I gripe about battery stats.
Branden10 said:
About battery heating...
I checked and mine is at 75-78F while in class. My n1 is also in a case, so for it to be that low is good. Just thought to throw that in as a comparison.
Also i've switched ROMs to help with battery, no luck there. Still experience 7-8% drop per hour.
I've been keeping my phone off now at school, which has helped, though I still lose nearly 15% while it's off.
Sent from my seXus One using XDA App. While I gripe about battery stats.
Click to expand...
Click to collapse
I understand if my battery was at 71-78F but my battery was at almost 97F just sitting in my pocket...
Hmm, I think it's weird that the battery still drops 15% when the phone is off...
adambenjamin said:
lol at this thread...
http://forum.xda-developers.com/showthread.php?t=714184
Do a nandroid back-up of CM6, and then try out the above ROM. You can always go right back to CM at any time.
Click to expand...
Click to collapse
Alright, I just flashed it with that OS. I'll let you know how it goes. Thanks!
timchoi89 said:
Alright, I just flashed it with that OS. I'll let you know how it goes. Thanks!
Click to expand...
Click to collapse
i was using the cyanogen mod 6.0 for my nexus one and had a major battery iss i would wake up for work fully charged 100 percent goes on stand by with my set cpu to the lowest possible and the task manager running... note its on standy by with the screen low powered no gps or wifi running? so its 100 percent charged and then i leave to work arrive at 6 or 6:30 and its down 10 percent or more??? please if anyone knows a good kernel or rom to use please let us know my battery is in good health and from stock.....
Jack_R1 said:
1) Discharging the battery below 10-15% is bad for the battery, doing it many time will destroy the battery, making it last just about nothing.
2) Check CPU usage - download System Monitor or some other app like that, and check the running frequency of the phone. When you just run the program and don't touch the phone, it should float around 300 MHz. If you have it locked on 998MHz - you have an app that got your CPU stuck in a loop.
3) Download some app that stores battery stats, and check your discharge current and battery capacity - that way you'll know if it's your battery dead or your apps drawing the juice.
Click to expand...
Click to collapse
im checking the cpu usage but i really dont know where and which app specificly i use but i took a few pics and will try to post them up as soon as possible....battery stats i will post that up too...please help anyone...i was using cyanogen mod now leofroyo2.1
I noticed, a few others, but should be minority has the same problem as mine.
My N1 powers off itself when my battery shows around 15% or so.. sometimes 17% sometimes 14%, never lower than 10%.
I already tried to wipe battery data at recovery or deleting the battstat.bin file etc etc but it is still like that.
Is there a solution for this and any reason for this?
Majority of people's phone only power downs below 5%.
Many thanks
Use the battery calibrator, it's in the development section.
Sent from my Nexus One using Tapatalk
baseballfanz said:
Use the battery calibrator, it's in the development section.
Sent from my Nexus One using Tapatalk
Click to expand...
Click to collapse
thanks man..
there are two with the same name.. i'll try them one by one
Try bump-charging* then clearing the battery stats
*Charge phone to 100%, unplug it, turn it off, charge again till indicator goes green
Rusty! said:
Try bump-charging* then clearing the battery stats
*Charge phone to 100%, unplug it, turn it off, charge again till indicator goes green
Click to expand...
Click to collapse
actually this i have tried a few times already but it never helped.
My phone turns off at around 19% now after I played with the battery calibrator app. (I set the life at 100%, was lazy to run the full cycle calibration)
Its powerful and probably can fix your problem.
Link: https://market.android.com/details?id=net.jonrichards.batterycalibrator.ui
britoso said:
My phone turns off at around 19% now after I played with the battery calibrator app. (I set the life at 100%, was lazy to run the full cycle calibration)
Its powerful and probably can fix your problem.
Link: https://market.android.com/details?id=net.jonrichards.batterycalibrator.ui
Click to expand...
Click to collapse
i am trying to do this too.
so you are saying it wont help coz yours got even worse (turning off at 19%)?
britoso said:
My phone turns off at around 19% now after I played with the battery calibrator app. (I set the life at 100%, was lazy to run the full cycle calibration)
Its powerful and probably can fix your problem.
Link: https://market.android.com/details?id=net.jonrichards.batterycalibrator.ui
Click to expand...
Click to collapse
To calibrate your battery and have it reliably die at 0% every time, follow the instructions that I wrote in post #3 here:
http://forum.xda-developers.com/showpost.php?p=7850480&postcount=3
schizophrenia said:
i am trying to do this too.
so you are saying it wont help coz yours got even worse (turning off at 19%)?
Click to expand...
Click to collapse
He said he was too lazy to complete the learn cycle, which is part of the calibration technique. There is no sense in trying to pick "pieces" of the process and hope they work, they won't. Start with step 1 and follow the directions to the letter, don't skip anything. I would suggest reading the instructions a couple of times prior to starting and ask questions in the thread if you aren't sure. There are several of us that monitor the thread and will respond quickly...myself during US daylight hours and Temasek in the evening (he's in asia, I think).
mtw4991 said:
To calibrate your battery and have it reliably die at 0% every time, follow the instructions that I wrote in post #3 here:
http://forum.xda-developers.com/showpost.php?p=7850480&postcount=3
Click to expand...
Click to collapse
am doing this right now and hope I understand everything and it works.
thanks a lot
schizophrenia said:
i am trying to do this too.
so you are saying it wont help coz yours got even worse (turning off at 19%)?
Click to expand...
Click to collapse
It will work if you follow the steps and run the full calibration (long time)
mtw4991 said:
To calibrate your battery and have it reliably die at 0% every time, follow the instructions that I wrote in post #3 here:
http://forum.xda-developers.com/showpost.php?p=7850480&postcount=3
Click to expand...
Click to collapse
Thanks. Wish there was a quicker/easier way.
I'm currently testing a direct way using simple math:
If 1452mAh is 100% how much is 19% ?
i.e. 1452/100*19 = 275mAh (for me)
I've set "full40" to 1452-275= 1177 (the calibrator app's minimum is 1200 so I just set it to that.)
britoso said:
It will work if you follow the steps and run the full calibration (long time)
Thanks. Wish there was a quicker/easier way.
I'm currently testing a direct way using simple math:
If 1452mAh is 100% how much is 19% ?
i.e. 1452/100*19 = 275mAh (for me)
I've set "full40" to 1452-275= 1177 (the calibrator app's minimum is 1200 so I just set it to that.)
Click to expand...
Click to collapse
That may work as a guess-timate, but the stock battery comes rated at 1452mAh and stock age is set to 94%, so you would really be setting to 1128mAh unless you reset age to 100%. It really doesn't take that long to set up the application for learn mode...just a few minutes. It does take 31/2-4 hrs to fully charge the phone and complete learn mode if you set the min. charge current to <20mA. To speed things up, just set it to <40mA as you won't miss the little bit of extra juice.
britoso said:
It will work if you follow the steps and run the full calibration (long time)
Thanks. Wish there was a quicker/easier way.
I'm currently testing a direct way using simple math:
If 1452mAh is 100% how much is 19% ?
i.e. 1452/100*19 = 275mAh (for me)
I've set "full40" to 1452-275= 1177 (the calibrator app's minimum is 1200 so I just set it to that.)
Click to expand...
Click to collapse
hmmm good point, i never thought of that lower limit. we'll see if we can update the app.
but to answer this thread's question, the age register in your phone is now out of whack, and you need to set it accordinly to allow the battery to go down to 0%. the learn cycle determine's the proper "age" value and sets it accordingly.
you could also guess an age value, say 83%, would be close. but really there's no reason to not do the learn cycle and figure it out.
BTW all these values are stored in your battery's chip, and it needs to be updated to new value.
Quick question:
1) Sometimes even after I turned on the "Detect Learn Mode" my Current occassionally dropped below -200mA (e.g. 160mA) for a quick while... will it affect the result?
2) "Turn off" means turning off the Detect Learn Mode right?
3) where can I see the "Charging current"? Capa.?
Thanks
What if I rotate among three different batteries on a regular basis? I have an external battery charger too. Will the calibration be in any way useful or will it get confused by the changes?
I have my original January 2010 battery, a December 2011 replacement from HTC, and a MOMAX battery that also holds up a pretty good charge.
Sent from my Nexus One using XDA App
cmstlist said:
What if I rotate among three different batteries on a regular basis? I have an external battery charger too. Will the calibration be in any way useful or will it get confused by the changes?
I have my original January 2010 battery, a December 2011 replacement from HTC, and a MOMAX battery that also holds up a pretty good charge.
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
you can rotate batteries no problem. when you do a learn cycle, the age value gets written to the chip inside the individual battery. so you can swap batteries no problem. just make sure that the correct age value shows up when you swap, cause sometimes the age resets when removed from the phone. just set it manually back to your proper age if so.
we were trying to add "profiles" support to the app so you could swap batterys and it remembers the parameters for each and sets them accordingly when you swap the battery. but i dont know how long that will take...
Okay good to know. I bought this charger:
http://www.amazon.com/PowerGen-Mult...CAT6/ref=sr_1_3?ie=UTF8&qid=1295658169&sr=8-3
And it's pretty neat because I can just position the pins myself to charge any battery I want. I've tried it with camera batteries, Huawei U1250, Moto Milestone and RAZR, and Nexus One batteries. It works really well and it's somewhat future-proof because it will probably work with my next phone's batteries too =)