I am trying to get ALL audio to my BlueAnt Interphone unit. Calls work fine on their own, with no extra audio enabled. Audio will come through OK until I either receive and finish a call or use Voice Command, then it goes to the phone speaker. I have tried using BTMusic, BlueMusic and BTAudio and they are all good at putting audio to the headset but only BlueMusic returns the audio after the call, the others drop out after any other activity. Strangely BlueMusic will return the audio to the headset after a call, but it doesnt allow the call audio through to the headset, it can only be heard on the phone speaker. Searching the forum doesnt seem to show this problem, although several are close they dont provide a solution, though they did provide the info regarding the software choices. I have set the Bluetooth settings with Kaiser Tweak.
Currently running the HTC WM6.0.
Any thoughts or suggestions?
Cheers
Hi, i have spent some time searching now and since i couldn't find this anywhere i decided to post here, hope someone can help me.
Recently, i bought the official sony playstation 3 bluetooth headset (http://www.us.playstation.com/PS3/Accessories/SCPH-98095) and i have connected it to my xperia x1 through bluetooth (running with itje's touch-it xperience v13.2), the problem is, it only outputs sound for the voice calls, i can't listen to music on it or the normal phone sounds. I know it would be mono sound and not high quality, but i would like to listen to the sound anyway sometimes because its better then leaving it silent.
i have tried in the bluetooth configuration window, clicking in advanced, editing the wireless device profile, thre it was marked hands-free, i clicked refresh and headset appeared, i marked it, then the headset disconnects. when i reconnect it, it auto demarks headset, or it doesnt connect.
I have looked around to see if it was the bluetooth headset problem, but i have not seen anyone else complaining about this or even mentioning it can't play the phone sounds (just some complains about the ps3 sounds not outputing but thats the ps3 fault), and i have also searched to see if it is x1s fault but haven't managed to find an answer as well, so if anyone can plz help i would really appreciate it. Thanks.
thats pretty much because its no BUG.
what u want is a a2dp headset. something tells me that the ps3 headset doesn has this feature. normal headset just route voice calls while a2dp headset route everything.
actually, i didnt use the word bug because i though that might be the case
it has the headset and handsfree profile, not a2dp, but what i wasnt sure if it really needed to have de a2dp profile to output normal sounds, from what i've read it seems it is needed to output stereo high quality sounds, but just sounds with low quality would work for me, thats why im asking, i though the headset profile would be enough for that.
so if i get your message right, unless it has specifically the a2dp profile, there is no other way of making the sound output on the headset, low or high quality?
now i know there might be a way to make it work.
i was listening to some music today using the music player that comes with touchflo 3d, then i pressed the talk button of my bluetooth headset to issue a voice command (with the microsoft voice command program), then the music started playing in my headset while it was waiting for the voice command, once it got the command the music went back to the phone.
Does anyone know any way to make my headset keep playing the sounds, or could at least explain what happens when i press the talk button so i have an idea of where to look to see if find a way?
no one can help me with this? not any tip or a way to select a different output for audio or anything like that?
Also an issue with Audio Gateway
I have tested this issue on two seperate headsets, and so far can get the Xperia to work ONLY as hands free. Seperate phones sperate headsets. The other phone pushed audio thru to the headset whereas the X1 only routes calls.
I also cant find much of this on XDA or anywhere else?
Help?
Regards
i used an ad2p software downloaded from here when i had this issue with my lg ks20. But i havent the gut or im just lazy to try this app on the x1. Maybe u should give that ad2p software a try.
This worked fine with the stock 2.1.. but when I flashed to 2.2 using Odin, I can't hear audio calls through my speakers plugged into the jack. Sound only plays through the earpiece or speakerphone.
Is there a fix for this? Do any of the custom ROMS have a fix for this?
Not to sound like a jerk, but have you searched the forums about this? This has been discussed quite a bit, so I'm surprised you didn't find it.
2.2 removed the option to play calls over external speakers.
Yeah I searched around for an hour then posted... it's really a dumb "feature" and I wish they would at least provide you a choice. Esp because I plug in my phone to my car and prefer to drive hands-free (sans bluetooth)
That's why I'm asking if one of the ROMs allow you to do that.
Im running precision 3.0 and I am able to hear my bluetooth calls via the headset but music only comes out the speaker of the phone. Anyone have any ideas? Cant workout and listen to music!!!
gocats7 said:
Im running precision 3.0 and I am able to hear my bluetooth calls via the headset but music only comes out the speaker of the phone. Anyone have any ideas? Cant workout and listen to music!!!
Click to expand...
Click to collapse
I'll take a stab at it. Bluetooth supports certain profiles. If you have a simple "Hands Free" headset, it may or may not produce music. I have Stereo BT headphones that function as a hands free headset (it also has a mic) as well as headphones for music. However I also have a low cost Motorola single ear loop and it only works for phone calls.
I think the type of headset you are looking for supports A2DP.
Or I might be completely wrong.
mmarquis said:
I'll take a stab at it. Bluetooth supports certain profiles. If you have a simple "Hands Free" headset, it may or may not produce music. I have Stereo BT headphones that function as a hands free headset (it also has a mic) as well as headphones for music. However I also have a low cost Motorola single ear loop and it only works for phone calls.
I think the type of headset you are looking for supports A2DP.
Or I might be completely wrong.
Click to expand...
Click to collapse
Oddly i rebooted twice and now it works.
Sent from my GT-I9000 using XDA App
Hi everybody. I have just got my new HTC One and I am really loving it. But I seem to have run into a major problem which I couldn't solve despite trying everything. Whenever I receive or dial a phone call while using a wired headset or bluetooth headset, I can hear the sound in the headset for a couple of seconds but then the call is routed by default to the internal speakers and mic. All this while the phone shows that the output is going to the headset. If I change it to the internal speaker and back again to the headset (wired or bluetooth), everything works normally and I can talk and hear through the headset. This problem only occurs with phone calls and I am able to listen to the music through headsets normally without any sound quality issue. I have searched on various internet forums but all in vain. A few more people were having this problem but no solution was in sight. I thought may be an upgrade would solve this problem but alas even after upgrading to the latest 4.3 update, the problems remains. Hope somebody here can help me with this problem.