Related
It's amazing! Best custom mount I've owned. And the clip that holds the phone is also a removable belt clip. There's a punch out for the camera, been driving around with layar turned on. It is win.
Sent from my ADR6300 using XDA App
link?
10 chars etc
I haven't seen it online yet, only in a store so far. Ill post pix later.
Sent from my ADR6300 using XDA App
Is it any different than this one?
http://amzn.com/B003LEGZGK
AFAIK, this is the only custom mount of ANY KIND for the Incredible produced by HTC, which drives me crazy.
tdiman said:
Is it any different than this one?
http://amzn.com/B003LEGZGK
AFAIK, this is the only custom mount of ANY KIND for the Incredible produced by HTC, which drives me crazy.
Click to expand...
Click to collapse
There are two versions available from the Verizon store. The one you linked to and one other. They both have one big issue. If you already have a protector for your phone that you like, it will not work unless you take your protector off. The one you linked to has one other issue, it uses double sided tape to mount. The other one I looked at had a suction mount, but as I said, it will not let you put your phone on it unless you remove any protector you are using.
the one linked is the one i'm talking about. i haven't found it on the VZW website anywhere, didn't think to look anywhere else. i don't use a case or anything full time, i ordered an otterbox for when i'm working to wear on my belt, but when i'm not i just throw the phone in my pocket and run. i wish seidio came out with a car mount like this that worked with one of their cases, that would be epic. i'm sure with a dremel tool you could make it work if you were so inclined.
I have this one
I bought this with my incredible when I first got it. before 30 days was up the clip broke. I took it back and got it replaced. Then a couple of weeks later the new one broke in a different place. I hadn't even taken the new one off the car mount and worn it on my belt. I ended up cutting off the clip and gluing the clip to the mount so that it became a car mount only.
dltccf said:
I bought this with my incredible when I first got it. before 30 days was up the clip broke. I took it back and got it replaced. Then a couple of weeks later the new one broke in a different place. I hadn't even taken the new one off the car mount and worn it on my belt. I ended up cutting off the clip and gluing the clip to the mount so that it became a car mount only.
Click to expand...
Click to collapse
where did it break?
i'm wondering if there's a way i can use another company's clip and case without having to remove it. thinking of getting the seidio innocase and clip or something like that, maybe just cut the little tab off of the car mount clip and using that on whatever one i end up getting.
I don't want or use the belt clip, just adds another point of movement to the system. There's no happy medium with adjustments, you either get it where you want it and tighten it down to no flexibility, or it is way too loose. Due to the way the suction cup is engineered, the act of placing the phone or removing it from the clip torques the suction, causing it to fall off all the time. Was not at all impressed.
I have this mount I just pictured. I find it reliable. I do not use the belt clip.. I always leave that on the mount.
I have never used phone cases on any of my cell phones for 12 yrs.. I only have a screen protector..
Dinc goes in my phone pocket. My designated pocket only for my phone.. Not change or car keys..
Carefull
I have one of these.. or I should say I've had 2 of these. First one broke after about 8 seconds of being up and I tried to rotate the phone, and the hing that holds the clip on snapped.
Took it back to Verizon they swapped it out... had the second one a month or so and went to remove the phone and clip from the stand... and the plastic washer that holds the clip to the mount broke.... I now have it zip tied and it works great.
I was not rough with it, its just very fragile. Otherwise a good mount.
I've had 2 and the first one broke within a week. The clip that hooks into the mount broke and wouldn't mount. The second one I had for a few days before it broke. The one the hinge went. I didn't bother trying to replace it again. They did swap it out, but if two break that quickly, I figure I'll just keep having the same problems.....
Add me to the "it's too darn fragile" camp. I ended up buying a third-party "one size fits all" type... They lie too, but it works. I just have to adjust it so the volume key isn't being squashed. (also, no cut out for camera)
2 broken clips at hinge and counting.
Same here, my clip hinge broke both times. I just have it sitting there in the car driving down the road and the phone just falls off and the hinge is broken. I think the plastic is too thin, should be a metal part, and the spring tension always on it fatigues it. Bad design.
I went to verizon and told them I wanted their generic mount and they handed me this:
http://www.amazon.com/Bracketron-PH...r_1_41?s=STORE&ie=UTF8&qid=1285511830&sr=8-41
The one Verizon actually sells is slightly different as the little bottom nodes that hold the phone phone sits on can be bent in and thus you can move the phone around. I will have to take a picture of mine. Anyways even with a case it fits perfectly and its only like $20 and if you have the corporate discount which gets you 25% off it runs about $16.70 total after taxes which is what I bought it for.
angryspoon said:
I went to verizon and told them I wanted their generic mount and they handed me this:
http://www.amazon.com/Bracketron-PH...r_1_41?s=STORE&ie=UTF8&qid=1285511830&sr=8-41
The one Verizon actually sells is slightly different as the little bottom nodes that hold the phone phone sits on can be bent in and thus you can move the phone around. I will have to take a picture of mine. Anyways even with a case it fits perfectly and its only like $20 and if you have the corporate discount which gets you 25% off it runs about $16.70 total after taxes which is what I bought it for.
Click to expand...
Click to collapse
So which one would you recommend? I plan on doing a lot of driving up and down I-95 to visit friends in Maine/NH/PA/MD/VA and would love having Google's "Navigator" mounted on my windshield instead of having it sitting in a cup holder (like I do now). I'll be careful with any mount I get, but those universal mounts are just too bulky and a lot of them mess with the volume controls or doesn't leave me a space to plug the phone into my lighter outlet (or have weird mounting points, like in one of the air vents).
DeeBG said:
So which one would you recommend? I plan on doing a lot of driving up and down I-95 to visit friends in Maine/NH/PA/MD/VA and would love having Google's "Navigator" mounted on my windshield instead of having it sitting in a cup holder (like I do now). I'll be careful with any mount I get, but those universal mounts are just too bulky and a lot of them mess with the volume controls or doesn't leave me a space to plug the phone into my lighter outlet (or have weird mounting points, like in one of the air vents).
Click to expand...
Click to collapse
I really recommend the Verizon one made for the incredible. all buttons and ports are accessible on the incredible
Like I said, I leave the belt clip mounted at all times, and the only protection I use for my phone is my special pocket and a screen protector.
patches152 said:
It's amazing! Best custom mount I've owned. And the clip that holds the phone is also a removable belt clip. There's a punch out for the camera, been driving around with layar turned on. It is win.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
I just bought it on a whim today and it is definitely great. Way better than the staples generic one that broke in the first 2 weeks
Wife and I both have one. Both broke right away. Replacements also broke. Always in the same place, the hinge for the clip snaps. The spring is simply way too powerful for the strength of the plastic. On the replacements I just slathered epoxy all over the hinge to make it a permanent mount. Neither one of us were using it for anything other than the car dock, but the thing just breaks like a cheap wine glass.
So in my experience they were 4/4 for breaking within 3 weeks. It's a great dock, but you just have to expect it to break unless you do what I did and glue the living crap out of it.
ive had my verizon mount for about 2 weeks now, my only complaint is that it has a removable belt clip. Ive tried different locations around my windshield and since I play with it so much, the clip has wiggled loose a time or two. other than that, its been better than any mounts ive tried to hack together for it.
TL;DR good mount, bit pricey
let me record out of the windshield... ie. let me record what i see when I drive...
I know, it's kind of a weird request, but is there one that will let me do this?
I highly doubt it, there is finally a company just now making a dock for the inc...but still not released yet. youre better off modifying an existing car mount to get that option or make something....can't be too difficult
Sent from my ADR6300 using XDA App
if i remember correctly.. the holster on the htc car dock has the camera cutout so you should be able to use it. the holster mounts to the dock and lets you rotate it to landscape so that should let you see out
I have a mount like this from VZ.. It captures the mount in the scene, but could probably be modded.
Best Buy sells an adjustable universal window mount setup that works perfect. You can virtually adjust it any way to make it fit, and would work great for your application. Plus, the side grips have a nice foam type material that would soak up a lot of vibrations.
luvit said:
I have a mount like this from VZ.. It captures the mount in the scene, but could probably be modded.
Click to expand...
Click to collapse
You could use a drill bit slightly larger than the camera whole. I actually have that verizon clip, and I think a mod would work quite well.
Sent from my ADR6300 using XDA App
No no, it captures the suction cup in the view.. Not the phone cradle.
Check out the M25 Sound dock on amazon. I have one, the angle is adjustable, and it steers out the window.
UnRevoked HTC Incredible
You could always get one of those non-sliding, weighted suction cup mounts that go on your dash then use any mount and place it facing the windshield.
You could always try to eBay a cheap universal mount and cheap DInc case, then super glue them together for a cheap custom fit case
There's a car mount on eBay called the SlipGrip that has a ton of different mounting solutions and custom molded cradles for the DINC in various kinds of 3rd party cases (Otterbox, silicone, VZW case, naked). The suction cup mount has a nice long adjustable arm so you could mount it with the suction cup on your dash rather than the windshield and adjust the cradle so the arm isn't in the shot. The cradle also rotates 180 degrees so you can record vertical or horizontal.
I will sell you one for $50 that is really nice. The cradle is made for the phone and you can suction mount it to your window or glass nightstand table. I will post pics in the morning.
This might not be the right place, but I can't find an answer - is there a car dock that will fit the Seidio 3500 battery? I don't know if the large battery causes any problems with car docks, but I would assume it does...
i use one thats actually for a I*hone. It clips and leaves the camera unobstructed.
Has any one tried this mount with the nexus 7?
Samsung Galaxy Tab 7.0 (P3100) - Holder with Tilt Swivel
Item #: 511381
thanks
No, but I've emailed them. They said they are still waiting to receive their Nexus. Then they would probably have a 3-5 week period before they'd be available for order.
can we get a link PLEASEEEEEEEEEEEE
THANKS in advance
Here's a link to the one in question. I believe they also have one for the kindle fire. I'm sure one technically works based on size, but I'll wait for the actual Nexus one to be released.
http://www.proclipusa.com/store/products/holder-with-tilt-swivel-511381.aspx
Then you need the vehicle mount of your choice for your specific vehicle.
I have the iPad version of that mount and it's excellent albeit a bit pricey.
How do you mount it? Screw it on to the dash?
if you click the link above, you should see vehicle mounts.
They make different mounts for each car. Typically without the use of even double sided tape. Definitely no screwing to the dash.
The device mount, bolts to the vehicle mount. The vehicle mount is attached to your specific vehicle. Nothing permanent.
For my car for example, there are two mounts that use no tools at all, and one that uses double sided tape.
I bought a ProClip mount for my phone (Galaxy S II) and was unimpressed to find that it lightly clipped into the dash of my car, but was mostly held on with adhesive tape. On hot days, the tape basically melts and the mount stays lightly clipped in, but sags and moves around. Not the "perfect sturdy mounting solution" that was advertised.
I emailed support and their answer to me (paraphrased) was "well we've sold a hundred of these without issue, so we can't do anything for you".
Oh great, I feel like a moron for spending $85 on a phone mount. So, word of warning, depending on what car you drive and what type of mount you order, it might sag under the weight of the Nexus 7.
brahmy said:
I bought a ProClip mount for my phone (Galaxy S II) and was unimpressed to find that it lightly clipped into the dash of my car, but was mostly held on with adhesive tape. On hot days, the tape basically melts and the mount stays lightly clipped in, but sags and moves around. Not the "perfect sturdy mounting solution" that was advertised.
I emailed support and their answer to me (paraphrased) was "well we've sold a hundred of these without issue, so we can't do anything for you".
Oh great, I feel like a moron for spending $85 on a phone mount. So, word of warning, depending on what car you drive and what type of mount you order, it might sag under the weight of the Nexus 7.
Click to expand...
Click to collapse
I love their holders (made by Brodit) but the dash adapters are weak.
I use a dash adapter from panavise. It is made of steel. The bolt patterns match those used by Proclip/Brodit. Works great.
I wish Brodit/Proclip would support the pogo pins and what-not.
I might try this out here soon, been wanting to do a full in dash install or radio replacement for the Nexus 7 but can't find anything for that.
I have an otterbox and I have been looking for a car mount but none of them are big enough to hold the phone inside the otterbox. Does anybody have any suggestions.
Edit - Wow I am blind. I somehow missed the giant thread already in progress about car mounts. -_-
Ram mount xgrip
Car Dock
I just got an HTC One M8 & also needed a new car dock. I got the iBolt dock from amazon that is universal. I will work with most phones, and ANY case.
Here's the link from Amazon:
http://www.amazon.com/iBOLT-xProDoc...&sr=8-3&keywords=iBolt+Universal+HTC+Car+Dock
The USB cord is reversible so you can have it on the left side, or on the side of a phone. I've had it for almost 3 weeks now & I love it!
Mountek nGroove is dead simple, and can hold just about any smartphone in any case.
As long as your CD slot is in a decent spot (to see the phone will navigating, etc.) and don't use it for CDs, this is a elegantly simple solution. It install in seconds, not sensitive to falling off like suction cups, and I've used it on a variety of rental cars while travelling (although a couple cars I've rented did not have good CD slot placement, such as low and the mount blocked the gearshift).
The nGroove even has a tension adjustment for the ball joint. As most any such joint will loosen over time and become useless without such an adjustment.
http://www.amazon.com/Mountek-nGroove-Universal-Phones-Devices/dp/B004G1L52Q/ref=sr_1_1?ie=UTF8&qid=1424794208&sr=8-1&keywords=cd+slot+phone+mount
redpoint73 said:
Mountek nGroove is dead simple, and can hold just about any smartphone in any case.
As long as your CD slot is in a decent spot (to see the phone will navigating, etc.) and don't use it for CDs, this is a elegantly simple solution. It install in seconds, not sensitive to falling off like suction cups, and I've used it on a variety of rental cars while travelling (although a couple cars I've rented did not have good CD slot placement, such as low and the mount blocked the gearshift).
The nGroove even has a tension adjustment for the ball joint. As most any such joint will loosen over time and become useless without such an adjustment.
http://www.amazon.com/Mountek-nGroove-Universal-Phones-Devices/dp/B004G1L52Q/ref=sr_1_1?ie=UTF8&qid=1424794208&sr=8-1&keywords=cd+slot+phone+mount
Click to expand...
Click to collapse
That is an interesting solution. Does it vibrate very much while driving and can the whole thing rotate to landscape? The reason I need the rotate function is I use polarized sunglasses and when my phone is in portrait I can barely see the screen.
theandies said:
That is an interesting solution. Does it vibrate very much while driving and can the whole thing rotate to landscape? The reason I need the rotate function is I use polarized sunglasses and when my phone is in portrait I can barely see the screen.
Click to expand...
Click to collapse
Any of the mounts vibrate some, at least the ones I've used. In my view, anything that juts or sticks out from the dashboard or windshield is going to shake a little from road vibration. But the Mountek nGroove doesn't vibrate much, and not in a way that effects its function or viewing the screen (such as for navigation).
The mount is on a ball joint, which easily changes from landscape to portrait orientation and vice versa. The ball joint also has a tension adjustment (that you turn with an object like a coin) so you can vary how loose or tight the ball joint movement feels.
Overall, a very slick, simple, yet well though-out solution. And at $20, you don't really have much to lose in trying it, either.
The only (slightly) negative comment I have on the Mountek nGroove, is that the dust flap or bristles that protects/seals your CD slot might (probably) get deformed over time (and it states this in the instructions). In fact on my car, the CD slot dust flap is a felt-like material, and the nGroove actually tore the material is 2 spots due to the way the clamping action works. But the nGroove is always in the CD slot, so I don't really care. Just something I (barely) noticed when I take the mount out.
Well, I'm not sure if you've found your solution already, but I have a tech matte vent car mount from amazon, and that's a pretty good mount.
http://www.amazon.com/iOttie-Holder...3&sr=1-1&keywords=iottie+easy+one+touch+2#Ask
http://www.amazon.com/gp/product/B00GXXHGLE/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
Best bang for your buck mount there. I have 2, love them.
DeathmonkeyGTX said:
Ram mount xgrip
Click to expand...
Click to collapse
This is what I use. I just swapped the suction cup for a screw in mount with a flat back and dual locked it to my dash to keep it off of my windshield.
I have this type.
http://www.brodit.com/brodit.html?pn=home
It's the best holder because It charge your phone and you have a free slot in your 12V because it's connected to car battery.
@ KeithN
I used the 14" flexible aluminum cylinder that bolts to the floor. You remove the corner seat bolt, put the thing on, and replace the bolt. Easy peasy and doesn't rattle.
DeathmonkeyGTX said:
@ KeithN
I used the 14" flexible aluminum cylinder that bolts to the floor. You remove the corner seat bolt, put the thing on, and replace the bolt. Easy peasy and doesn't rattle.
Click to expand...
Click to collapse
Very nice. Thanks for sharing!
Montar universal car dock. Best car dock EVER.
https://www.youtube.com/watch?v=CZmbqCIc9K8
Scosche magic mount. Love that thing. I was a bit leery of trusting a magnet to hold my phone, but it holds very well, even in the super bouncy cab of a tractor-trailer.
nuts77 said:
Montar universal car dock. Best car dock EVER.
https://www.youtube.com/watch?v=CZmbqCIc9K8
Click to expand...
Click to collapse
I've never heard of that brand before... hmmm
waynerbbx said:
I've never heard of that brand before... hmmm
Click to expand...
Click to collapse
been using this one since I got my M7. Never even had to remove it to place it again Really, it's a great accessory.
This new mount from Spigen is the best car mount I've ever seen. Mount it right behind the steering wheel and you have a heads up display just below the windshield, at least on the Mazda 3. Perfect.
http://www.spigen.com/products/spigen-car-mount-stealth
It's good but could be better. The sticker on it sucks for the windshield in hot weather. I replaced it with 3m tape.
Car Rental
Would this work well for someone who is looking for a mount to use in rental cars? Not seeing how reusable the adhesive pad is anywhere or if it's going to leave marks that I'll get charged for.
rgs2 said:
This new mount from Spigen is the best car mount I've ever seen. Mount it right behind the steering wheel and you have a heads up display just below the windshield, at least on the Mazda 3. Perfect.
http://www.spigen.com/products/spigen-car-mount-stealth
Click to expand...
Click to collapse
Nice one.. Thanks for sharing
You could use the 3M tape in a rental car. I haven't had any problems with the tape that comes with it.
rgs2 said:
You could use the 3M tape in a rental car. I haven't had any problems with the tape that comes with it.
Click to expand...
Click to collapse
Which one?
Sent from my LG-H815 using Tapatalk
http://www.amazon.com/gp/product/B00EYNRJOE?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
I've been using this $10 mount for a bit over 2 years now, and it has never fallen off my dashboard. If anything, it's hard to pull it off the dash at times if I want to move it somewhere works great, cheap, zero complaints.
ryanpm40 said:
http://www.amazon.com/gp/product/B00EYNRJOE?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
I've been using this $10 mount for a bit over 2 years now, and it has never fallen off my dashboard. If anything, it's hard to pull it off the dash at times if I want to move it somewhere works great, cheap, zero complaints.
Click to expand...
Click to collapse
it says...
The power suction enables you to mount on to almost any surface such as dashboards, metal, glass, plastic and even drywall Silicon lined grid keeps your phone and other devices safe and secure.
A suction attachment seems much more durable than adhesive. temperature won't matter and it can be adjusted as it isn't permanent. An essential feature.
rgs2 said:
This new mount from Spigen is the best car mount I've ever seen. Mount it right behind the steering wheel and you have a heads up display just below the windshield, at least on the Mazda 3. Perfect.
http://www.spigen.com/products/spigen-car-mount-stealth
Click to expand...
Click to collapse
I like this, nice simple, compact design. Easy to install my phone onto it too.
hmmmm I might have to grab one of these, I like the compact design so you cant really tell its there when your phone is not in it
Pro-Clip rules. No Sticky tape. And I prefer portrait mount for Nav. I want to see more of what's ahead than what I'm passing.
Nice but doesn't have Qi support for me... I use my phone a lot in the truck so I have been looking for less hassle with cords for the power... got the bluetooth audio for the nav & music but it needs a power source to run all day.
Amazon sell it for #16.99
http://m.ebay.com/itm/Spigen-Stealth-Cellphone-Car-Holder-Universal-Car-mount-for-Cell-Phone-Devices-/201358824286?nav=SEARCH&varId=500554301058 heres the exact same spigen mount on ebay, 20$ , a much better deal then the 30 they charge on their site.
my favourite mount is the magnetic CD slot mount, like this one, they are amazing.
http://www.amazon.com/Lifetime-Univ...37231&sr=8-11&keywords=magnetic+cd+slot+mount
NICE ONE ~ Like the design. I guess I'll have to ask my dad to buy one of this. He is still using a navigator when driving.