Related
I have a stock pure edition Moto X 2014, I received the update today. It downloads fine, but when it tries to install, it Error, and then reboots, and tells me the install is unsuccessful. This has happened 3 times. I'm rooted, but everything else is stock. How do I troubleshoot or attempt to resolve. I don't even know where to go from here. Thanks for any help!
Can't be rooted. You need a stock system partition.
crap, thanks for the reply. I was worried that was the case. Can I go back?
randyklein said:
crap, thanks for the reply. I was worried that was the case. Can I go back?
Click to expand...
Click to collapse
Go to http://www.graffixnyc.com/motox.php and grab the 4.4.4 stock image. Extract and place in platforms-tools folder with fastboot.
After downloading the image for your device:
Put your device in fastboot mode.
NOTE: You must use the Motorola fastboot utility to flash (included in the Darwin/, Linux/ or Windows/ directory). Please do NOT use the Android fastboot utility
Follow the flashing steps in the .xml file that was included in the package.
A typical flashing sequence includes all these partitions, but might vary depending on your product - so please use the sequence in the .xml file in your package:
$ fastboot flash partition gpt.bin
$ fastboot flash motoboot motoboot.img
$ fastboot reboot-bootloader
$ fastboot flash logo logo.bin
$ fastboot flash boot boot.img
$ fastboot flash recovery recovery.img
$ fastboot flash system system.img
$ fastboot erase modemst1
$ fastboot erase modemst2
$ fastboot flash fsg fsg.mbn
$ fastboot reboot
You also have the option to erase all the data on your device with
$ fastboot erase userdata
$ fastboot erase cache
Hope this helps. Copied and pasted the commands from Motorola.
bradley26 said:
Go to http://www.graffixnyc.com/motox.php and grab the 4.4.4 stock image. Extract and place in platforms-tools folder with fastboot.
After downloading the image for your device:
Put your device in fastboot mode.
NOTE: You must use the Motorola fastboot utility to flash (included in the Darwin/, Linux/ or Windows/ directory). Please do NOT use the Android fastboot utility
Follow the flashing steps in the .xml file that was included in the package.
A typical flashing sequence includes all these partitions, but might vary depending on your product - so please use the sequence in the .xml file in your package:
$ fastboot flash partition gpt.bin
$ fastboot flash motoboot motoboot.img
$ fastboot reboot-bootloader
$ fastboot flash logo logo.bin
$ fastboot flash boot boot.img
$ fastboot flash recovery recovery.img
$ fastboot flash system system.img
$ fastboot erase modemst1
$ fastboot erase modemst2
$ fastboot flash fsg fsg.mbn
$ fastboot reboot
You also have the option to erase all the data on your device with
$ fastboot erase userdata
$ fastboot erase cache
Hope this helps. Copied and pasted the commands from Motorola.
Click to expand...
Click to collapse
Thanks so much! You are awesome.
For anyone else with this issue, here is how I solved this.
-Download mfastboot v2 from here, extract into your ADB folder.
-Download "Official 4.4.4 Full Restore Images" from http://www.graffixnyc.com/motox.php# and extract. Move recovery.img, boot.img, and system.img into adb folder
-Boot into fastboot, plug in USB
-Using mfastboot v2, run the following commands:
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img
Reboot and the update should now work. Good luck.
I am at encryption unsuccessful... No fastboot, no recovery.. not adb or mfastboot foes not recognize my device. But computer device managerr shows device...
Any workaround to get mfastboot detect my moto x xt1053.
Thanks
affineer said:
I am at encryption unsuccessful... No fastboot, no recovery.. not adb or mfastboot foes not recognize my device. But computer device managerr shows device...
Any workaround to get mfastboot detect my moto x xt1053.
Thanks
Click to expand...
Click to collapse
If you cant access bootloader fastboot and the device is only black screen and the green light notification you have HARD BRICK.
this means you have downgread the device and you try to update ota to newer version.
If you do this you bricked your phone and there is no solution.
If not try to charge your battery for long time and after try to boot on fastboot mode.
Oh sorry you have xt1053?
This is not moto x 2014.
What device do you have?
Moto g,moto x1 ?
The tread is for moto x2.
papsr6 said:
If you cant access bootloader fastboot and the device is only black screen and the green light notification you have HARD BRICK.
this means you have downgread the device and you try to update ota to newer version.
If you do this you bricked your phone and there is no solution.
If not try to charge your battery for long time and after try to boot on fastboot mode.
Oh sorry you have xt1053?
This is not moto x 2014.
What device do you have?
Moto g,moto x1 ?
The tread is for moto x2.
Click to expand...
Click to collapse
sorry for wrong posting,
my device can boot. run boot up animation after bootloader unlocked warning. and stays at ENCRYPTION UNSUCCESSFUL. Reset button does not work.
Power button works fine. but key combination does not help booting to fastboot or recovery. Have tried "mfastboot reboot bootloader" but it does not sense device.
Device manager detects it as MTP device.
Any help.
I will continue seeking help in xt1053 forum till I get it working.
affineer said:
sorry for wrong posting,
my device can boot. run boot up animation after bootloader unlocked warning. and stays at ENCRYPTION UNSUCCESSFUL. Reset button does not work.
Power button works fine. but key combination does not help booting to fastboot or recovery. Have tried "mfastboot reboot bootloader" but it does not sense device.
Device manager detects it as MTP device.
Any help.
I will continue seeking help in xt1053 forum till I get it working.
Click to expand...
Click to collapse
First time i hear this.
Youmust ask in xt1053 tread if someone know what can you do.
Moto x2 not showing this problem i think.
You are sour you use the right combination of buttons for fastboot mode?
Hold power and volume up for turn off the device first and afte try combination buttons for fastboot bootloader mode.
Hello,
I just accidentally apply Mi3w stock partition file to system2 via cwm. Now I cannot flash userdata.img to my device. What should I do? Detailed process please, if you don't mind because I'm just a beginner. Thanks
Connect your phone in fastboot mode
Enter this
Fastboot flash partition gpt_both0.bin
This file is in fastboot rom.
This will restore stock partitions, then flash all the kitkat rom.
Currently i installed Kingroot in slimbit LP rom but after see people suggest method i uninstalled it & follow him tap root access in devolopment section & reboot but still not get Root access Than i try go in TWRP restore back this rom my phone stuck+ bootloop & keep loading in MI logo only !!! Pls help HELP HELP !! What should i do... i try fastboot flash fastboot rom failed too HELP HELP HELP !!!
Not going to send to phone center & currently my ROM can't not boot because of extend partition before & not stock partition... Help me PLEASE !!!
Thank you... It works like a charm. You save my bricked device :good:
IAmKifayat said:
Connect your phone in fastboot mode
Enter this
Fastboot flash partition gpt_both0.bin
This file is in fastboot rom.
This will restore stock partitions, then flash all the kitkat rom.
Click to expand...
Click to collapse
IAmKifayat said:
Connect your phone in fastboot mode
Enter this
Fastboot flash partition gpt_both0.bin
This file is in fastboot rom.
This will restore stock partitions, then flash all the kitkat rom.
Click to expand...
Click to collapse
Can you explain this method ? is it just key in your code in CMD using windows 7 laptop than work ??
fastboot flash tz tz.mbn
fastboot flash dbi sdi.mbn
fastboot flash sbl1 sbl1.mbn
fastboot flash rpm rpm.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot erase boot
fastboot flash misc misc.img
fastboot flash modem+modem1 NON-HLOS.bin
fastboot flash system+system1 system.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash recovery recovery.img
fastboot flash recovery twrp-2.8.7.0-cancro.img
fastboot flash recovery CWM.imgfastboot flash boot+boot1 boot.img
fastboot reboot
Enter in which line？
coolkillermax said:
Can you explain this method ? is it just key in your code in CMD using windows 7 laptop than work ??
fastboot flash tz tz.mbn
fastboot flash dbi sdi.mbn
fastboot flash sbl1 sbl1.mbn
fastboot flash rpm rpm.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot erase boot
fastboot flash misc misc.img
fastboot flash modem+modem1 NON-HLOS.bin
fastboot flash system+system1 system.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash recovery recovery.img
fastboot flash recovery twrp-2.8.7.0-cancro.img
fastboot flash recovery CWM.imgfastboot flash boot+boot1 boot.img
fastboot reboot
Enter in which line？
Click to expand...
Click to collapse
After modifying the partitions, Mi flash isn't able to flash the rom because it flashes dual boot rom, so in order to restore stock partition this fastboot command restores the stock dual boot partitions.
Open fastboot cmd prmpt and enter it. Then flash the fastboot rom.
Please refer to en.miui.com/thread-58623-1-1.html
coolkillermax said:
Can you explain this method ? is it just key in your code in CMD using windows 7 laptop than work ??
fastboot flash tz tz.mbn
fastboot flash dbi sdi.mbn
fastboot flash sbl1 sbl1.mbn
fastboot flash rpm rpm.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot erase boot
fastboot flash misc misc.img
fastboot flash modem+modem1 NON-HLOS.bin
fastboot flash system+system1 system.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash recovery recovery.img
fastboot flash recovery twrp-2.8.7.0-cancro.img
fastboot flash recovery CWM.imgfastboot flash boot+boot1 boot.img
fastboot reboot
Enter in which line？
Click to expand...
Click to collapse
If your partition table is missing, you can enter
"Fastboot flash partition gpt_both0.bin"
at the first line to ensure your partition table is restored before doing the entire fastboot command. I did it and it works!
coolkillermax said:
Can you explain this method ? is it just key in your code in CMD using windows 7 laptop than work ??
fastboot flash tz tz.mbn
fastboot flash dbi sdi.mbn
fastboot flash sbl1 sbl1.mbn
fastboot flash rpm rpm.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot erase boot
fastboot flash misc misc.img
fastboot flash modem+modem1 NON-HLOS.bin
fastboot flash system+system1 system.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash recovery recovery.img
fastboot flash recovery twrp-2.8.7.0-cancro.img
fastboot flash recovery CWM.imgfastboot flash boot+boot1 boot.img
fastboot reboot
Enter in which line？
Click to expand...
Click to collapse
IAmKifayat said:
After modifying the partitions, Mi flash isn't able to flash the rom because it flashes dual boot rom, so in order to restore stock partition this fastboot command restores the stock dual boot partitions.
Open fastboot cmd prmpt and enter it. Then flash the fastboot rom.
Click to expand...
Click to collapse
yohaneseko said:
If your partition table is missing, you can enter
"Fastboot flash partition gpt_both0.bin"
at the first line to ensure your partition table is restored before doing the entire fastboot command. I did it and it works!
Click to expand...
Click to collapse
After follow your method enter "Fastboot flash partition gpt_both0.bin" cmd show flash OK than i flash fastboot rom than stuck on "Modern+modern 1" so i consider flash rom need more time so i let it run BUT until more than Half hour CMD still stuck on "Modern+modern 1" so i unplug it that phone Fastboot screen disappear & become Black Screen than i try charge it,red notification light keep blinking more than hours & now i try press "volume down+ power button phone won't boot in fastboot.... Oh my God !!!!! what should i do now to fix it ??
Now situation change, i try reconnect phone to laptop than "fastboot" come out again but after flash phone boot blinking MI logo than off & LED red light blinking 1 time & turn blinking to MI logo & keep repeating... Pls check my screen shot of all flashing process,,,, Advise me...
It should be okay... but dude... it was MODEM, not MODERN... (I write it in capslock in case there are typos). If your phone can enter fastboot, please repeat these lines:
Code:
fastboot flash partition gpt_both0.bin
fastboot flash tz tz.mbn
fastboot flash dbi sdi.mbn
fastboot flash sbl1 sbl1.mbn
fastboot flash rpm rpm.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot erase boot
fastboot flash misc misc.img
fastboot flash modem NON-HLOS.bin
fastboot flash modem1 NON-HLOS.bin
fastboot flash system system.img
fastboot flash system1 system.img
fastboot flash cache cache.img
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash userdata userdata.img
fastboot flash boot1 boot.img
fastboot reboot
Wish you luck this time...
coolkillermax said:
After follow your method enter "Fastboot flash partition gpt_both0.bin" cmd show flash OK than i flash fastboot rom than stuck on "Modern+modern 1" so i consider flash rom need more time so i let it run BUT until more than Half hour CMD still stuck on "Modern+modern 1" so i unplug it that phone Fastboot screen disappear & become Black Screen than i try charge it,red notification light keep blinking more than hours & now i try press "volume down+ power button phone won't boot in fastboot.... Oh my God !!!!! what should i do now to fix it ??
Now situation change, i try reconnect phone to laptop than "fastboot" come out again but after flash phone boot blinking MI logo than off & LED red light blinking 1 time & turn blinking to MI logo & keep repeating... Pls check my screen shot of all flashing process,,,, Advise me...
Click to expand...
Click to collapse
yohaneseko said:
It should be okay... but dude... it was MODEM, not MODERN... (I write it in capslock in case there are typos). If your phone can enter fastboot, please repeat these lines:
Code:
fastboot flash partition gpt_both0.bin
fastboot flash tz tz.mbn
fastboot flash dbi sdi.mbn
fastboot flash sbl1 sbl1.mbn
fastboot flash rpm rpm.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot erase boot
fastboot flash misc misc.img
fastboot flash modem NON-HLOS.bin
fastboot flash modem1 NON-HLOS.bin
fastboot flash system system.img
fastboot flash system1 system.img
fastboot flash cache cache.img
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash userdata userdata.img
fastboot flash boot1 boot.img
fastboot reboot
Wish you luck this time...
Click to expand...
Click to collapse
Ops！Sorry type Error… No luck！ Just now i wake up from bed and check Phone after charging now led light become yellow instead of blinking red so i plug off it than same situation Before = MI LOGO blinking！ Phone can't rebooting！And recovery not Working just fastboot can…… Saw your command all put together different with my method lastnight flash separately… Will try your method later Bro.
Sent from my Lenovo K860i using xda premium
coolkillermax said:
After follow your method enter "Fastboot flash partition gpt_both0.bin" cmd show flash OK than i flash fastboot rom than stuck on "Modern+modern 1" so i consider flash rom need more time so i let it run BUT until more than Half hour CMD still stuck on "Modern+modern 1" so i unplug it that phone Fastboot screen disappear & become Black Screen than i try charge it,red notification light keep blinking more than hours & now i try press "volume down+ power button phone won't boot in fastboot.... Oh my God !!!!! what should i do now to fix it ??
Now situation change, i try reconnect phone to laptop than "fastboot" come out again but after flash phone boot blinking MI logo than off & LED red light blinking 1 time & turn blinking to MI logo & keep repeating... Pls check my screen shot of all flashing process,,,, Advise me...
Click to expand...
Click to collapse
Use latest version of Mi flash and select flash all using it.
yohaneseko said:
It should be okay... but dude... it was MODEM, not MODERN... (I write it in capslock in case there are typos). If your phone can enter fastboot, please repeat these lines:
Code:
fastboot flash partition gpt_both0.bin
fastboot flash tz tz.mbn
fastboot flash dbi sdi.mbn
fastboot flash sbl1 sbl1.mbn
fastboot flash rpm rpm.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot erase boot
fastboot flash misc misc.img
fastboot flash modem NON-HLOS.bin
fastboot flash modem1 NON-HLOS.bin
fastboot flash system system.img
fastboot flash system1 system.img
fastboot flash cache cache.img
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash userdata userdata.img
fastboot flash boot1 boot.img
fastboot reboot
Wish you luck this time...
Click to expand...
Click to collapse
No luck follow your method CMD stuck on writing "system1"(see pictures attached) Pls advise what to do ??
IAmKifayat said:
Use latest version of Mi flash and select flash all using it.
Click to expand...
Click to collapse
Follow your method but ended with Error per picture attached Please advise what to do ??
coolkillermax said:
Follow your method but ended with Error per picture attached Please advise what to do ??
Click to expand...
Click to collapse
Hi, Maybe all you need is to flash either the TWRP recovery or CWM recovery 1st, then from the recovery only get back your phone. Heres the link from MIUI , for custom recovery http://en.miui.com/thread-58623-1-1.html for MIUI stock recovery http://en.miui.com/thread-66649-1-1.html
coolkillermax said:
Follow your method but ended with Error per picture attached Please advise what to do ??
Click to expand...
Click to collapse
Flash twrp,
Connect phone as mtp, place recovery rom in phone.
Then flash.
ksloh1 said:
Hi, Maybe all you need is to flash either the TWRP recovery or CWM recovery 1st, then from the recovery only get back your phone. Heres the link from MIUI , for custom recovery http://en.miui.com/thread-58623-1-1.html for MIUI stock recovery http://en.miui.com/thread-66649-1-1.html
Click to expand...
Click to collapse
Your method i tried before with fastboot flash in CMD but did not work...
IAmKifayat said:
Flash twrp,
Connect phone as mtp, place recovery rom in phone.
Then flash.
Click to expand...
Click to collapse
i have those recovery file in IMG files before that people given to me,pls look picture attached is it all that recovery OK to flash ?? than flash code is = fastboot flash recovery twrp-2.8.7.0-cancro.img
am i right ?
Now my MI3 phone totally can't boot to any mode !! When i connect my phone with PC led red light keep blinking
i think now phone is low battery so i will charge it see how later... Anyway many thanks to all of you guys & Hopefully your methods give me luck save my DEAD SENSITIVE DAMN XIAOMI MI3!! FUXK XIAOMI
First rename your recovery to recovery.img, thus you can't use "fastboot flash recovery twrp-2.8.7.0-cancro.img"
use
Code:
fastboot flash recovery recovery.img
instead... wish you luck
coolkillermax said:
Your method i tried before with fastboot flash in CMD but did not work...
i have those recovery file in IMG files before that people given to me,pls look picture attached is it all that recovery OK to flash ?? than flash code is = fastboot flash recovery twrp-2.8.7.0-cancro.img
am i right ?
Now my MI3 phone totally can't boot to any mode !! When i connect my phone with PC led red light keep blinking
i think now phone is low battery so i will charge it see how later... Anyway many thanks to all of you guys & Hopefully your methods give me luck save my DEAD SENSITIVE DAMN XIAOMI MI3!! FUXK XIAOMI
Click to expand...
Click to collapse
IAmKifayat said:
Flash twrp,
Connect phone as mtp, place recovery rom in phone.
Then flash.
Click to expand...
Click to collapse
yohaneseko said:
First rename your recovery to recovery.img, thus you can't use "fastboot flash recovery twrp-2.8.7.0-cancro.img"
use
Code:
fastboot flash recovery recovery.img
instead... wish you luck
Click to expand...
Click to collapse
Hello All,
Tried your method phone no response & stuck on fastboot !! What to do ??
yohaneseko said:
It should be okay... but dude... it was MODEM, not MODERN... (I write it in capslock in case there are typos). If your phone can enter fastboot, please repeat these lines:
Code:
fastboot flash partition gpt_both0.bin
fastboot flash tz tz.mbn
fastboot flash dbi sdi.mbn
fastboot flash sbl1 sbl1.mbn
fastboot flash rpm rpm.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot erase boot
fastboot flash misc misc.img
fastboot flash modem NON-HLOS.bin
fastboot flash modem1 NON-HLOS.bin
fastboot flash system system.img
fastboot flash system1 system.img
fastboot flash cache cache.img
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash userdata userdata.img
fastboot flash boot1 boot.img
fastboot reboot
Wish you luck this time...
Click to expand...
Click to collapse
No luck per picture attached Please look into it & tell what to do next ??
Okay, guys...
I have a big, big, big issue and If it's possible, I'd like all the help in the world.
I unlocked my bootloader, upgraded to mm 6.0 and decided to root and install TWRP because bloatware, right?
Anyways, I did a big no-no and after a series of unfortunate events, I don't have a recovery and I can only boot into the bootloader.
Don't ask HOW I got here, I couldn't tell you with a gun to my forehead.
Now, I have tried ways to get myself out of this:
Installed an earlier TWRP recovery - doesn't work
Installed CM recovery - Doesn't work
Looked on motorola.ca for stock images - doesn't work
I can boot my phone with TWRP but I can't install it. (the inapropriate partition size error in pink)
whatever. Whenever I boot into twrp, I see all my partitions and with modifications on, I cannot format my /sdcard/ partition (internal memory)
it was being detected by my pc a few times and after a few more tries to flash ANY rom compatible with my phone, I simply have no luck.
Any advice right now is more than appreciated!
Awaiting answers with impatience.
EDIT: Forgot to mention the model number is the XT1097 canadian Moto X 2014 (Telus mobility)
Thanks for the help in advance
Have you tried this? Put ROM/gapps on internal storage. Fastboot boot twrp, then flash ROM/gapps with twrp. Once booted you should be able to install twrp via playstore without the partition mismatch issue. I had to go this route to get twrp to stick on my XT1096
I cannot access the internal memory for some reason!
I hear my pc make a sound for connected but it doesn't show up in explorer
Have you tried ADB sideload? Try flashing the stock MM Rom Zip located in the Moto X 2014 XDA Thread. It might work, if it doesn't, I can send you a toolkit that might fix the phone.
I did try to sideload and I get the following:
Installation failed: unable to mount (all the partitions are listed)
E: Failed to mount
E: Can't mount
And if you're talking about RDS Lite, I am completely unable to find my phone with it.
What I really need is a tool that will fix the partition table.
I don't know how, but I messed it up REAL GOOD!
also, for some reason I Have 2 recoveries atm.
When I completely power off my phone and then power on, I boot into the CyanogenMod Recovery.
THEN, when I reboot into recovery, I go into the TWRP recovery.
And every time afterwards I Reboot to recovery, I come back to the TWRP
Install Motorola USB Drivers:
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
Download and keep full firmware VICTARA_RETCA_XT1097_6.0
https://mega.nz/#F!ow8igZRL!Z7vmN8GOpez2bVMYDvEKkg!IkEVHRxS
If you are able to flash with fastboot, maybe you can go back to stock, then go on from there.
Try these, one by one:
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
I know you wouldn't, but hope you do. But if you could tell me how you got here, I could assist you better.
Thank you, Mate!
This restored my phone to retail!
I am in your debt!
You're welcome. We are all here to help each other.
Hi, I am in the exact same situation right now. I tried the fastboot method to flash all the files for the XT1096 VZW version. Every time I boot up after flashing everything, the dead andy with read exclamation point 'No Command' logo pops up and blinks every 5 seconds or so. Any help please? Thanks!
So I managed to get TWRP to install. Now I can't flash anything. All the partitions are somehow corrupted and I can't mount anything. Any ideas on how to fix the partitions?
OK
My apologies, Gus. I just posted a new QA thread on here. Can we discuss there? Thanks.
Hey I am bricked my device I am was on global rom and then wanted to convert to Chinese rom tried to flash it through system update.. And now stock on fastboot forever until now.. I am tried to flash system. Img of Chinese rom.. Got message that file too big in adb.. There is any program to compress this img?
danielad200 said:
Hey I am bricked my device I am was on global rom and then wanted to convert to Chinese rom tried to flash it through system update.. And now stock on fastboot forever until now.. I am tried to flash system. Img of Chinese rom.. Got message that file too big in adb.. There is any program to compress this img?
Click to expand...
Click to collapse
Local update didn't work because of mismatch boot.img and recovery.img. In fastboot flash CN boot and recovery then reboot recovery, wipe data and cache, insert OTG with CN.zip package and install.
***When switching region ROMs always do this method from recovery, local update does not handle this well at all and fails most times.
***If you want you could also try EDL mode, I never tried it but theoretically the command "adb install N629J-update.zip should work. I have not tried this method but that's what EDL mode is for ?
danielad200 said:
Hey I am bricked my device I am was on global rom and then wanted to convert to Chinese rom tried to flash it through system update.. And now stock on fastboot forever until now.. I am tried to flash system. Img of Chinese rom.. Got message that file too big in adb.. There is any program to compress this img?
Click to expand...
Click to collapse
Even i had the same issue. First make sure you are using the latest version of ADB and Fastboot. Use 1.4.3 or higher. Sometimes it will be installed in C:\Program Files(X86)\minimal adb and fastboot Folder. Copy the img files to this location and then flash the image.
Download necessary files https://drive.google.com/drive/folde...Ym?usp=sharing
fastboot oem nubia_unlock NUBIA_NX629J
fastboot -w
fastboot reboot
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash system system.img
fastboot reboot
When you flash system.img you should get a warning message. Don't close the window. Wait for sometime. It should split the file upload as 5 parts. Once all the 5 parts are uploaded. Then type fastboot reboot. Then remove the charging cable(very important) and you should get the normal warning message and then phone will try to boot. Once you get the splash screen and booting screen. Press volume Up and power together. It should go to default recovery. Select English. Wipe data and then wipe cache. Reboot. Now your phone should boot normally. Hope this helps. Good luck.
Pm me i know how to fix
I tried it
vimalrajan1988 said:
Even i had the same issue. First make sure you are using the latest version of ADB and Fastboot. Use 1.4.3 or higher. Sometimes it will be installed in C:\Program Files(X86)\minimal adb and fastboot Folder. Copy the img files to this location and then flash the image.
Download necessary files https://drive.google.com/drive/folde...Ym?usp=sharing
fastboot oem nubia_unlock NUBIA_NX629J
fastboot -w
fastboot reboot
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash system system.img
fastboot reboot
When you flash system.img you should get a warning message. Don't close the window. Wait for sometime. It should split the file upload as 5 parts. Once all the 5 parts are uploaded. Then type fastboot reboot. Then remove the charging cable(very important) and you should get the normal warning message and then phone will try to boot. Once you get the splash screen and booting screen. Press volume Up and power together. It should go to default recovery. Select English. Wipe data and then wipe cache. Reboot. Now your phone should boot normally. Hope this helps. Good luck.
Click to expand...
Click to collapse
I tried it, but i got problem when I flash system.img, the error is: "Invalid sparse file format at header magic". Did you know how to fix that? Sorry for bad English
https://forum.xda-developers.com/red-magic-3/how-to/tool-nubia-red-magic-3-unbirck-tool-t3965044
Easy to use unbrick tool.
vimalrajan1988 said:
Even i had the same issue. First make sure you are using the latest version of ADB and Fastboot. Use 1.4.3 or higher. Sometimes it will be installed in C:\Program Files(X86)\minimal adb and fastboot Folder. Copy the img files to this location and then flash the image.
Download necessary files https://drive.google.com/drive/folde...Ym?usp=sharing
fastboot oem nubia_unlock NUBIA_NX629J
fastboot -w
fastboot reboot
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash system system.img
fastboot reboot
When you flash system.img you should get a warning message. Don't close the window. Wait for sometime. It should split the file upload as 5 parts. Once all the 5 parts are uploaded. Then type fastboot reboot. Then remove the charging cable(very important) and you should get the normal warning message and then phone will try to boot. Once you get the splash screen and booting screen. Press volume Up and power together. It should go to default recovery. Select English. Wipe data and then wipe cache. Reboot. Now your phone should boot normally. Hope this helps. Good luck.
Click to expand...
Click to collapse
I did it as directed. But after fastboot reboot command. When I pressed v+ and power button I got the traditional white screen with ants.
Link expired please give me new one
I flash the Chinese ROM to the global version of red magic3
And entered the boot loader boot loop
How to fix it?
If you try to flash system.img, tell me how to fix the problem that fastboot.exe will stop working.
I saw other threads, but I didn't know well because I was so nervous in English
yajujann said:
I flash the Chinese ROM to the global version of red magic3
And entered the boot loader boot loop
How to fix it?
If you try to flash system.img, tell me how to fix the problem that fastboot.exe will stop working.
I saw other threads, but I didn't know well because I was so nervous in English
Click to expand...
Click to collapse
I am Japanese High school student . So I can't understand English well
kelv55l said:
(skipped message) ...
After you extracted the img and bin files and placed them into the folder where the cmd is placed connect your phone to the computer, open the cmd exe and run the commands
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot bootloader
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot flash dsp dspso.bin
fastboot oem nubia_lock NUBIA_NX629J
fastboot reboot
After all that you should be able to go into recovery mode through fastboot mode if not then try and flash dtbo.img and vbmeta.img in the line of commands so for example "fastboot flash dtbo dtbo.img" and "fastboot flash vbmeta vbmeta.img" looking something like this...
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot bootloader
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash dtbo dtbo.img
fastboot flash vbmeta vbmeta.img
fastboot flash modem NON-HLOS.bin
fastboot flash dsp dspso.bin
fastboot flash system system.img
fastboot reboot
This was the line of commands I used when my recovery mode was corrupt and somehow worked
I hope this helps and let me know if it worked or if the issue is still there. Also the forum has several posts on this matter and they might have the answer you are looking for as it helped me with this issue. Good Luck!
Click to expand...
Click to collapse
Please try this kelv55l's suggestion
into fastboot
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash recovery recovery.img
then into recovery wipe data
you can get recovery.img from update.zip
Hello i have no system.img ...
i can not find them in the NX629J_Z69_EN_WPJ0O_V210.zip
Can you Help me or can you me send the system.img
Please
My Phone have a bootloob in the fastboot mode...
"Hello, I have a problem. I flash twrp on my phone and wanted to flash from CN to EU version. I deleted the system and wanted to select the EU zip file. it did not work. That's why I restarted the phone. Now the phone starts only in the bootloader and the phone is no longer recognized by the PC although I have installed all drivers. Is there a special software that recognizes the phone or is the phone now forever defect? "
Thanks for the Help!
https://imgur.com/a/TRAJp9I
here you have the files and commands necessary to fix it. use the last sdk
https://forum.xda-developers.com/red-magic-3/help/stuck-fastboot-mode-t3937527/page7
Thanks for the Answer!
I have a Problem with the Flash system.img
I have Uploadet a Sreenshoot!
https://imgur.com/a/b3Vdi9N
try fastboot flash -S 500M system system.img
if it wont work
fastboot flash -S 100M system system.img
ok i make
---------- Post added at 12:40 AM ---------- Previous post was at 12:27 AM ----------
tattoomees said:
try fastboot flash -S 500M system system.img
if it wont work
fastboot flash -S 100M system system.img
Click to expand...
Click to collapse
Holly !
THANKS MAN YOU ARE A HERO!!!!!
THANKS BROOO