[Q] 3 Issues! Anybody Else Have These? - Galaxy S I9000 Q&A, Help & Troubleshooting

Okay I have these three issues with my phone...
1. Bluetooth: Sometimes when I enable bluetooth and connect it to my headset and try and play something no sound comes through and then the phone becomes redicuasly laggy. To fix this I power down the phone, then when I try to power it back up there is no response from the phone. After pulling and reinserting the battery the phone manages to boot and then connects to bluetooth headset & works fine. This has happened multiple times.
2. 3 Button: I know a lot of people have this but my phone has no recovery mode by the 3 button combo. I see there is a sort of firmware fix that people aren't sure is the real deal yet
3. Battery Loose: When I shake my phone, tap my screen or hold it tight you can hear the battery blatantly rocking around. It feels so loose and makes the phone feel patheticly cheap, I've resorted to stuffing folded paper in there to make it feel at least a little bit solid.
Amounst these I also have a few GPS issues and lag issues which I'm not worried about as I see there is the upcoming Froyo rom and Voodoo lag fix which will fix there however on the issues above I'm considering trying to return my phone under warrarnty (which might prove difficult as its parralell importers I got it from ) what do you guys recon? Try to get a replacement or these issues common and not worth it?

Bluetooth: sounds like you have an A2DP capable headset and when it connects it's scanning your phone for medias to play and it's slow due not enough memory, due all the extra background process running that are not needed.
3 Button modes: the fixes on the Dev forum works install them if you dare, and want some protection, otherwise don't flash any ROM if you are not confortable with the idea
Batter Loose?! really? no way! WTF? how? there's no room in the compartment to move at all, are you sure it's not a used phone or a fake battery?

About the battery...
My SGS battery fit nicely & tightly in the compartment and won't easily drop out even shaking with the case removed.
Maybe should return & swap a new battery or the whole unit

edwinlinkt said:
Maybe should return & swap a new battery or the whole unit
Click to expand...
Click to collapse
yup! i agree, it sounds waaaaaaaay too fishy, probably some one messed up with that phone and re-sold it
i'll return the phone and demand a new one

I would also agree with returning it. Mine has no wobble or rocking around so i'd be inclined to think its faulty or fake.
Also we've heard how these type of battery's can explode so i wouldn't take any risks with a dodgy one.

Mine kind of shakes but I blame myself as I've taken the battery in and out alot to flash new roms and updates so I kind of bent the back cover a little. Thank god I didn't snap the back (yet). I also have a full leather case so the back cover issue isn't a problem at all

Related

Phone powers off by itself.

Ok here is the Problem,
several times throughout the day i go to pull my phone out of its nice little holster and i hit the power button to wake it up and it was off.
very frustrating because it has to boot up and then i have like 5 emails 9 texts and the phone begins to ring telling me they have been trying to get ahold of me for the last 20 minutes or so. ooops soory run on.
here is what i have on my tilt
winterface
throttle launcher 9.5
s2u
s2v
live search
sirius wm5
google maps
Ygo!
PSNES
Diamond TV
core player
icontact
blah blah blah....
etc... the usuals.
i have uninstalled winterface and TL and tried it that way still no luck.
the holster that i use is this one.
http://www.daydeal.com/product.php?productid=13622&cat=2955
(it has a pouch for my blutooth and spare batt...)
Edit: i seem o recall someone saying not use a holster with a magnet or something? any truth to phone interferance from a magnet.?
Answer: (for when its figured out)
Please gurus throw me some ideas, and dont just say mean stuff just because i didnt search the forum first cuz i did. also people who are mean on the internet are usually punks or nerds in real life. I happen to be mean in real life and a nerd on the internet. lol...
Whew. thats a lot
Carefully clean the contacts on your battery and on the device...
mrphatpat said:
Edit: i seem o recall someone saying not use a holster with a magnet or something? any truth to phone interferance from a magnet.?
Answer: (for when its figured out)
Pl...
Whew. thats a lot
Click to expand...
Click to collapse
As to the case with magnet, i use one that has two in it, with no issues,
What are your power management settings ? incase you do not know, go to settings>power> then at the bottom advanced tab, un-check the turn off device box .
F2504x4 said:
What are your power management settings ? incase you do not know, go to settings>power> then at the bottom advanced tab, un-check the turn off device box .
Click to expand...
Click to collapse
Well in this case power off means to put the device to standby -- this is normally what you want to keep your battery from draining too fast.
It sounds like in his case the phone is actually turning off, since it has to boot.
hence my advice to check the contacts
burtcom said:
Well in this case power off means to put the device to standby -- this is normally what you want to keep your battery from draining too fast.
It sounds like in his case the phone is actually turning off, since it has to boot.
hence my advice to check the contacts
Click to expand...
Click to collapse
I agree, it's a good idea to clean the contacts carefully with a cotton bud and contact cleaner or IPA (applied to the cotton bud). Any grease (such as from fingerprints) will likely not be seen on the contacts, but it's effects will be felt in this way along with possible erratic indications of low battery charge state or charging probs. If that doesn't make a diff, the next thing to check would be to remove the blah blah blah package, that software company always makes unreliable programs
But seriously, the o/p is unlikely to find someone with the exact same combination experiencing the same problem so I think the easiest way to track down the culprit is to do a hard reset and then progressive reinstall, testing for a day or two after installing each package until you find which package, when installed, brings on the problem.
thank you for your answers folks.
here is what i have done, cleaned the battery contacts.
using a different case.(not sure if it matters but no magnets)
and removed Winterface...
so far there have not been any issues with the Phone's power being off.
(yeah i knew it after i wrote it the whole standby/off thing thanks)
so far no issues for 12 hours or so.
@F2504x4
How long have you used the magnet case, and do you use it everyday?
just curious...?
mrphatpat said:
thank you for your answers folks.
here is what i have done, cleaned the battery contacts.
using a different case.(not sure if it matters but no magnets)
and removed Winterface...
so far there have not been any issues with the Phone's power being off.
(yeah i knew it after i wrote it the whole standby/off thing thanks)
so far no issues for 12 hours or so.
@F2504x4
How long have you used the magnet case, and do you use it everyday?
just curious...?
Click to expand...
Click to collapse
first Glad to hear that you hopefully resolved the issue, but it will be hard to say just what fixed it, I drive racing karts, and one thing I learned is to only make one change at a time in order to figure out if it was helpful or not..something to think about..
As to the case, been using it for over a year just about 24/7 with both a 8525 and the Tilt, before I had a Pearl with a magnet , no issues , cool thing about the Pearl was that the magnet would cause the Pearl to go into sleep mode when holstered it, by design and would wake up as soon as you pulled it from the pouch .
so i do no think the case was the issue.
BTw the magnets are very strong and the flap will not open very easily.

Shuts off when keyboard is slammed shut...

This is really bugging me but on occasion, when I slam the keyboard shut, the phone turns off. It also has happened when I opened the keyboard but only a few times.
I actually dissassembled the phone to see if maybe it was a loose connection somewhere. I did find that the keyboard ribbon cable was loosely connected so I reseated it firmly...but the problem didn't go away.
I also thought it may be either the SIMM card or the memory card contacts but after removing them, again, I still can reproduce the problem.
Understand that this is an intermittent problem and a little unpredictable but I can make it happen within a few tries. If I cautiously open and close the keyboard (without slamming it shut), I have no problems.
I don't believe it's software related because I can force it to happen when the device is booting up (with the Ericsson logo on the screen) before the OS loads.
Anyone else experiencing this?????
11/17/08 UPDATE: PROBLEM RESOLVED!
After further review and testing, it appears that the battery was losing connection to the battery contacts. I shoved a small crumb of paper folded up (about 1mm thick) at the back of the batt and the problem has gone away. Of course, I'm still holding my breath every time I open and close the keyboard but it looks like that may have been the problem. That's strange because I'm using the original battery. Thought this may help in case anyone else ever runs into this.
That sounds like a problem with the internals, maybe a you should get it replaced/repaired?
Kid says to doctor " IT hurts when I twist my arm backward like this." Doctor replies "then don't do that"
You say "my phone shuts off when I slam my keyboard shut" Doctor says "don't slam your keyboard shut"
this thought just made me laugh.
Seriously though. It does sound like an internal hardware issue that you should have fixed otherwise it may just get worse and start happening more regularly and at very inconvenient times.
Good luck.
Reminds me of my samsung slider phone the day that it died. I was sliding it back and forth.. sometimes the screen would go completely white and then come back.
By the end of the day, it went white and stayed that way.
Turns out the cable on the inside was slowly being cut from rubbing against the metal hole it was going thru every time the slider moved.
You've checked the cables before... but maybe its not cut yet, but something on the slider mechanism is hitting a wire/pulling on it.
Nobody knows.
But we all do know thats not normal. So yea get it replaced.
LOL!
hotrod101 said:
Kid says to doctor " IT hurts when I twist my arm backward like this." Doctor replies "then don't do that"
You say "my phone shuts off when I slam my keyboard shut" Doctor says "don't slam your keyboard shut"
this thought just made me laugh.
Seriously though. It does sound like an internal hardware issue that you should have fixed otherwise it may just get worse and start happening more regularly and at very inconvenient times.
Good luck.
Click to expand...
Click to collapse
That's funny!!!
I think you're right...
Nippero said:
Reminds me of my samsung slider phone the day that it died. I was sliding it back and forth.. sometimes the screen would go completely white and then come back.
By the end of the day, it went white and stayed that way.
Turns out the cable on the inside was slowly being cut from rubbing against the metal hole it was going thru every time the slider moved.
You've checked the cables before... but maybe its not cut yet, but something on the slider mechanism is hitting a wire/pulling on it.
Nobody knows.
But we all do know thats not normal. So yea get it replaced.
Click to expand...
Click to collapse
Yep...It's going back. Might as well get a fresh one. I know this problem existed for other phones before and the fix was mostly something simple that didn't require a replacement.
im getting exactly the same problem. gonna send mine back as well.
i have the exact same problem too! Waiting for a new one...
i thought i was the only one with this problem, but it looks like a production error as there are already 3 people on this board who have this defect.
technillion said:
This is really bugging me but on occasion, when I slam the keyboard shut, the phone turns off. It also has happened when I opened the keyboard but only a few times.
I actually dissassembled the phone to see if maybe it was a loose connection somewhere. I did find that the keyboard ribbon cable was loosely connected so I reseated it firmly...but the problem didn't go away.
I also thought it may be either the SIMM card or the memory card contacts but after removing them, again, I still can reproduce the problem.
Understand that this is an intermittent problem and a little unpredictable but I can make it happen within a few tries. If I cautiously open and close the keyboard (without slamming it shut), I have no problems.
I don't believe it's software related because I can force it to happen when the device is booting up (with the Ericsson logo on the screen) before the OS loads.
Anyone else experiencing this?????
11/17/08 UPDATE: PROBLEM RESOLVED!
After further review and testing, it appears that the battery was losing connection to the battery contacts. I shoved a small crumb of paper folded up (about 1mm thick) at the back of the batt and the problem has gone away. Of course, I'm still holding my breath every time I open and close the keyboard but it looks like that may have been the problem. That's strange because I'm using the original battery. Thought this may help in case anyone else ever runs into this.
Click to expand...
Click to collapse
yep, my problem seems to have gone now as well by using you're method. i was almost ready to send it back and then i saw you're post and tried your method and it worked !
Thats a pretty stupid mistake by SE...
They should do a quick fix by making new batters a smidge thicker. Of course they probably wouldn't offer free replacements, but they should fix it anyway.
technillion said:
11/17/08 UPDATE: PROBLEM RESOLVED!
After further review and testing, it appears that the battery was losing connection to the battery contacts. I shoved a small crumb of paper folded up (about 1mm thick) at the back of the batt and the problem has gone away. Of course, I'm still holding my breath every time I open and close the keyboard but it looks like that may have been the problem. That's strange because I'm using the original battery. Thought this may help in case anyone else ever runs into this.
Click to expand...
Click to collapse
Where did you place the paper exactly ? On the back of the battery where all the info text is or on the bottom ?
When my device is cold, eg in the morning for first use, this sometimes doesnt happen for >20x tries...but when i used it for a longer time and it almost always shuts down when slammed shut..but i already thought it might be something with the battery, but sometimes while slamming it shut for numerous times even the battery cover would come up and it didnt shut down...then in another situation it shuts down immediatly
Poor design...
toxical said:
Where did you place the paper exactly ? On the back of the battery where all the info text is or on the bottom ?
Click to expand...
Click to collapse
Yea...what I found with the design is that the ribbon cable connecting the keyboard sits right under the battery. In fact you can see the protrusion when you remove the battery under the white label. It moves when the keyboard is opened and closed. Slightly...but it does move.
...anyway...I folded a small piece of paper to wrap around the back edge of the battery.
Try this:
1. Make a small rectangular strip of paper about 10mm x 20mm and fold it the long way so you end up with a 5mm x 20mm piece.
2. Wrap it around the back/bottom edge of the battery as you reinsert it.
(If the battery fits more snug in its compartment, you got it right!)
3. Put the back cover back on--which should also be more snug.
4. Turn on the device and try it out (slam the keyboard).
(You don't have to wait for it to completely boot up...you can test it when the SE logo appears).
Be careful to use regular copy paper and not paper that's too thick as it may cause some other damage/problems with the device.
could you make a picture of that ?
Actually i will recieve a new device tomorrow, but i still have the feeling that this problem might reoccur as it seems to be a design flaw
technillion said:
11/17/08 UPDATE: PROBLEM RESOLVED!
After further review and testing, it appears that the battery was losing connection to the battery contacts. I shoved a small crumb of paper folded up (about 1mm thick) at the back of the batt and the problem has gone away. Of course, I'm still holding my breath every time I open and close the keyboard but it looks like that may have been the problem. That's strange because I'm using the original battery. Thought this may help in case anyone else ever runs into this.
Click to expand...
Click to collapse
I'm currently playing around with an old XV6800 I got off ebay, and this seems to have fixed the problem, so thanks
I had the same problem too.. but it was linked with the flex cable. Now i just don't use my keyboard even after fixing it.

What happened to my radio?

OK I have been using my N1 for almost 2yrs now. I love it, but out of nowhere the connections on bluetooth, wifi, 3G, and occasionally cellular drop. Coincidentally it happened when 2.3.6 was released and I refused (updated since no change) the update. When I use my bluetooth headset I'm told I sound like I am underwater. I installed CM7 thinking that would solve it (maybe it's a stock ROM issue) but it was still the same. I can put my phone next to the router and still show (1bar) a poor connection .
OK so what can I do to fix this? I don't want to purchase a new phone (besides this glitch it looks mint) right now. Also I don't really have the cash for it either. Someone said the antenna may be loose (don't know how that would happen) and I could open it up and fix it.
Now you all Mod software but has anyone actually opened up an N1 and is there really a way to tighten the antenna? Please let me know if anyone else has had this issue or is there a way to test for a solution.
Thanks
A little more info
Was just on a cell call and noticed that the green cellular indicator turned white (no idea if that's related) it is back to green now and full. However this seems to be a pattern of being green 3G and Cell strength to white. Hope that provides so more info to someone trying to help me.
Green/white is an indication of connection to Google servers, nothing else.
Radio is only responsible for 3G data, bluetooth and WiFi are completely different entities and aren't related to radio. If you're experiencing bad reception - most probably your antenna contacts need cleaning or are misplaced, open the lower cover (not the battery one) and look there (this cover IS the antenna - just don't know which one).
Special tools?
Jack_R1 said:
Green/white is an indication of connection to Google servers, nothing else.
Radio is only responsible for 3G data, bluetooth and WiFi are completely different entities and aren't related to radio. If you're experiencing bad reception - most probably your antenna contacts need cleaning or are misplaced, open the lower cover (not the battery one) and look there (this cover IS the antenna - just don't know which one).
Click to expand...
Click to collapse
OK found a teardown on youtube of the Nexus one so I understand the antenna is on the bottom. However it looks like they used a special tool to open the case on the bottom. Where would I get that? Also considering I paid for it outright (yep unsubsidized direct from Google); even if I'm out of warranty would you recommend (if this is something more complicated) I send it to HTC for repair? Someone else said the Broadcom chip may have gone bad if both the wifi and bluetooth seem to stop working or have poor reception. Not sure if that seems correct since if it went bad I would think it wouldn't work at all but before I make tool marks trying to take it apart I figured I'd ask.
I'm not sure the repair will be worth it, financially.
If you want to open the lower part of the case - you may only need a small flat screwdriver and good hands, to avoid scratching the surface.
Something else now
OK now voice dial command isn't working when I hold the bluetooth button. Maybe indeed it is the chip. I was able to take off the plastic cover but I need to get a T5 screw driver (lol for some reason smallest I have is T6) so I will get one tomorrow and see how it goes. There is one more cover to remove and put back on. Financially since I paid full price I'm not sure why it's not worth fixing? I figured HTC would charge around $100 for a repair. Which is less than going price for a new (i.e. Galaxy Nexus II) phone . Also I haven't seen any new phones with a trackball (which I love for the notifications and when I need precise movement) so I really don't want a new phone till they add something like an optical trackball or improve precision on finger location. Also I might get lucky if the credit card I purchased it on will cover a repair (they double warranties) and I still have a few months left.
Nope!
Jack_R1 said:
I'm not sure the repair will be worth it, financially.
If you want to open the lower part of the case - you may only need a small flat screwdriver and good hands, to avoid scratching the surface.
Click to expand...
Click to collapse
OK got the required tools and took it apart (both covers on the bottom) and then re-assembled it back, making sure I seated the vibrator motor back carefully. Turned on the wifi and still have same issue. So guess my phone is broke further than I can repair it. Thanks for your advice but unless there is software to check that chip it looks like only option is HTC.
Yes, looks like it might be damaged beyond the home repairs capability.
Financially - If I were you, instead of spending $100 on Nexus One repair, I'd sell it for parts for $70 or so, added the $100 you wanted to spend on the repair, and bought a used MT4G in good condition. You'll lose colored trackball (and get a trackpad - which, if you use Sense ROMs that this phone runs perfectly, will be absolutely useless), but gain WAY better phone, in just about every aspect you can think of. The same applies to any phone you can get for cheap from "outdated" MSM8x55 family - Desire HD/Desire Z/G2/Desire S (some of them aren't compatible with T-Mobile frequencies, put attention). I know this from first hand experience, since until recently I had 3 of them - Nexus One, MT4G, and Desire S for my wife. Guess which phone did I get rid of?
But - just in case you'll want to follow this advice and settle specifically on MT4G - make sure you read MT4G forums thoroughly before you do. There are 2 weak points for MT4G - the screen (more important) and the eMMC chip (less important, but still counts). Both can come in 2 variations, better and worse. Make sure you choose the better.

Got a busted digitizer but no spare phone? Here's a solution

My milestone has led a pampered and then rough life of music gigs and festivals back and forth and decided to give up it's ghost (or give me ghost-touches if you will) due to a failing digitizer after a Dillinger Escape Plan gig (http://www.youtube.com/watch?v=AyzQgysUOdU I'm right in the center of the mosh pit hehe).
I've since decided that I'd save a little more money and get a Galaxy Nexus, even if I'd very much prefer a Droid4 if only to have a proper QWERTY slider phone. They don't sell them here .
Anyway, being that I've had to continue using my POS (can you tell I'm pissed) phone, I decided to look for a way to disable the touch screen and see how feasible it is to control with only the keypad and a few touches.
Which led me to these 2 apps
https://play.google.com/store/apps/details?id=com.argotronic.touchblocker
Screen Lock / disable touch Argotronic
I've had it set up so that I can "lock" the touchscreen via shaking the device, and unlocking the screen in the same way. Despite disabling the touchscreen, the notification pulldown still remains active, so you can still pull it down and quickly tap yourself to whatever via the Dpad if necessary.
Now, of course, what use is all this if you can't swipe to unlock your ****?
https://play.google.com/store/apps/details?id=com.jiubang.goscreenlock
Go Locker
This, apart from still bringing up the stock lockscreen whenever you restart your phone (this goes away after 1-2 unlocks), solves that problem by allowing you to unlock your phone via long pressing the volume rocker.
I've found that it is entirely feasible to run the phone this way.
Apart from that, I bid this community a farewell as what little regular posting I used to do has already dropped tremendously the last few weeks, and much thanks to everyone who has helped me and the developers. <3 Kabaldan, get a galaxy nexus please! though I'd suppose your talents would be better suited to another poor locked up phone.
This community helped me get quickly familiar with Android, and in particular with a "difficult" phone, and I will never forget this. I'll probably get a new digitizer + keyboard and just put it on my desk as a... completely over powered clock. or something. Hey, when was the last time you said overpowered when talking about the Milestone?
Oh, and to solve the gig/festival problem so my Gnex doesn't meet a similar fate I'll be getting an Xperia Active as a secondary phone since that **** is hard as nails, waterproof, small (3") and reasonably priced.
EDIT: Reason I'm not just fixing up my Milestone to continue to use it is because I've always suspected that my mobile radio is a little faulty as I've always had trouble maintaining 3G+ connectivity/sync, I figure it'll just crap itself out eventually. It's also, and I'm sure most will agree, starting to become painfully slow hahah.
If you are willing to take a little risk, after taking out battery, SIM card and microSD card, worm up your phone by putting it in the oven over a towel or on a blow heater (yeah, for real) for a few minutes. Then, you will need to put it in a dry place (like drawer or something) during the night. Turn it up in the morning and it shall work.. it worked for me anyway, I was sure my phone was dead and the digitizer was damn busted.. it must have been moist from the inside, so I used to have very annoying ghost screen..
good luck mate..
oshosh said:
If you are willing to take a little risk, after taking out battery, SIM card and microSD card, worm up your phone by putting it in the oven over a towel or on a blow heater (yeah, for real) for a few minutes. Then, you will need to put it in a dry place (like drawer or something) during the night. Turn it up in the morning and it shall work.. it worked for me anyway, I was sure my phone was dead and the digitizer was damn busted.. it must have been moist from the inside, so I used to have very annoying ghost screen..
good luck mate..
Click to expand...
Click to collapse
Hmm, I completely forgot about this!
I had done some drying with a hairdryer, I had originally noticed that the ghost-touches would get more severe if it spent an hour or two in my pocket, but completely forgot about trying it to dry it a different way. I'll put in a bag of rice tonight!
Thanks
Putting your device in the oven could really fix your problem. I've heard of this before in a different context (fixing gaming consoles..). What it does is fixing soldering points by melting them. Connections between cables and the board are then (hopefully) fixed again.
There are several methods including the oven, microwave, hairdryer and so on..
moe6 thank you for you post
will try the screen lock app
i have no need for the go locker, with cm7 you can unlock the phone by sliding the keyboard.
i have two questions
how can i answer/end a call easily without the screen?
is there any way to have a back button routed to the key board?
i use "search+z" to start(swich) back to my launcher
i guess i will try the oven trick but i really concerned if i will break the milestone completely. should survive a few week.
that poor old thing
UnitedOceanic said:
moe6 thank you for you post
will try the screen lock app
i have no need for the go locker, with cm7 you can unlock the phone by sliding the keyboard.
i have two questions
how can i answer/end a call easily without the screen?
is there any way to have a back button routed to the key board?
i use "search+z" to start(swich) back to my launcher
i guess i will try the oven trick but i really concerned if i will break the milestone completely. should survive a few week.
that poor old thing
Click to expand...
Click to collapse
Good thing you thanked the top post, I would've missed your post otherwise .
Yeah I know you can unlock via keyboard slide but I have my phone caseless and its always in my pocket and it tends to slide open just enough to unlock it occasionally .
I answered calls by using the d-pad on the keyboard. Just tap it once and it should begin highlighting buttons on the screen, press d-pad center button to select. Unfortunately for you, my back button did still work as the "dead" part of my digitizer was on the right side of the phone where Home and Search is.
I think the drying tricks help mostly with ghost touches since I'd assume that the ghost touches are from small amounts of water/sweat/liquid. After drying it with a hairdryer, short bit in the oven and then stuck in a bag of rice, my ghost touches stopped 80% from what they were before. The digitizer is still dead on one side though.
Now all I need is a Droid/Milestone dock and a new digitizer so my old Milestone can live its life out as a very complicated desk clock
You can actually make it work real good without much issue. You'll need a CM ROM so you can enable the Menu to unlock option and then use v6 Supercharger Bulletproof Apps to lock the screen disabling software into memory so it doesn't crash and it doesn't run bad at all. Also, there is a really good app to remote control your phone from your computer so if you have adb and a data cable, you can get it working good.
Do you know what that app is called?
Sent from my Galaxy Nexus using Tapatalk
Chris.fowler said:
Do you know what that app is called?
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
I personally use AirDroid, it's amazing.

Auto power-on driving me nuts

Whenever I leave the house, I unplug my Note to take it along but every time, before I stick it in my shirt pocket I have to turn it off first. That's because it on by itself just because I removed the charging cable. At first I thought this would just be a minor annoyance, but by the time I've needlessly turned off the thing a few hundred times the damn thing really starts to annoy me. And it's even worse when I try to charge it in my car because every time I turn the key one way or another I have to turn the phone off yet again. It's a bit more difficult because I have one of those silicon rubber protector things so it takes a little longer to find the off button. But I like the protection that this cover provides. I suppose I could just wait for the timeout (which I like at 5 minutes), but that would waste some battery power that I may need later. Plus it just annoys me if it is on when I'm not using it. (Actually it is the same problem when I plug it in to the charger as well!). So who decided on this ridiculous behavior? If it is an Android thing - shame on Google. If it is a Samsung thing - shame on them. (If so I might even switch phones ... although I haven't heard of another phone that can compete with the Note). Or is it just a quirk of my ROM? (I only used GB for an hour or so, and didn't have time to observe this behavior or not - then I flashed PA which I have been using ever since.) I love this ROM although I would switch in an instant if I could get rid of my only real annoyance with this phone.
~Paul
pmennen said:
Whenever I leave the house, I unplug my Note to take it along but every time, before I stick it in my shirt pocket I have to turn it off first. That's because it on by itself just because I removed the charging cable. At first I thought this would just be a minor annoyance, but by the time I've needlessly turned off the thing a few hundred times the damn thing really starts to annoy me. And it's even worse when I try to charge it in my car because every time I turn the key one way or another I have to turn the phone off yet again. It's a bit more difficult because I have one of those silicon rubber protector things so it takes a little longer to find the off button. But I like the protection that this cover provides. I suppose I could just wait for the timeout (which I like at 5 minutes), but that would waste some battery power that I may need later. Plus it just annoys me if it is on when I'm not using it. (Actually it is the same problem when I plug it in to the charger as well!). So who decided on this ridiculous behavior? If it is an Android thing - shame on Google. If it is a Samsung thing - shame on them. (If so I might even switch phones ... although I haven't heard of another phone that can compete with the Note). Or is it just a quirk of my ROM? (I only used GB for an hour or so, and didn't have time to observe this behavior or not - then I flashed PA which I have been using ever since.) I love this ROM although I would switch in an instant if I could get rid of my only real annoyance with this phone.
~Paul
Click to expand...
Click to collapse
First the silicon protector that you put in your phone because it cover also the power when put it in your pocket it keeps triggering it, its like a hair trigger.
Of course when you plug the charger it will trigger the screen to on.
Why dont you just adjust the screen time out to one minute.
I dont have this problem but anyway, a quick fix would be to use Tasker which lets you easily automate everything in your phone
jonpaslim said:
Why dont you just adjust the screen time out to one minute.
Click to expand...
Click to collapse
That would result in about as many needless and annoying presses of the power button as it turned off when I didn't want it to.
hotelier1984 said:
I dont have this problem but anyway, a quick fix would be to use Tasker which lets you easily automate everything in your phone
Click to expand...
Click to collapse
That would be great if Tasker could turn it off again for me when it was turned on automatically. I took a quick look at the hardware events that tasker can act on such as:
Display: Off/On/Unlocked
File: File Closed/Deleted/Modified/Moved/Opened/Attributes Changed
Hardware: Camera Button, Search Button Long-Press, Card Mounted/Removed/Unmounted
Misc: Gesture, Shake
Phone: Missed Call, Phone Idle/Offhook/Ringing, Received Text, SMS Send Success/Failure
Power: Battery Changed/Full/Low/Overheating
System: Device Boot, Device Shutdown, Device Storage Low, Locale Changed, New/Removed/Updated Package, Wallpaper Changed
However being plugged in or out is not in this list. So how can it be done?
~Paul
I'd like to know too.
I can understand "screen on when charging cable plugged in". But its annoying as hell to have the screen on when charging cable is removed. Since 95% of the time it's going right into my pocket.
press the power button and screen will go of...
baz77 said:
press the power button and screen will go of...
Click to expand...
Click to collapse
Sad to see such an ignorant reply. Or perhaps he just has a dry sense of humor. Hard to tell which.
~Paul
Deleted
let's understand this better:
Your phone is off and turns on upon disconnected from the charger, or it is already on, but you don't want the screen to lighten up when you disconnect?
If it's the first case, that's weird...mine never auto initiates...If the second case, really don't know what you could do.
If it's the first scenario, maybe a factory reset? But beware of the brick bug and flash a safe kernel first.
Enviado de meu GT-N7000 usando o Tapatalk 2
pmennen said:
Whenever I leave the house, I unplug my Note to take it along but every time, before I stick it in my shirt pocket I have to turn it off first. That's because it on by itself just because I removed the charging cable. At first I thought this would just be a minor annoyance, but by the time I've needlessly turned off the thing a few hundred times the damn thing really starts to annoy me. And it's even worse when I try to charge it in my car because every time I turn the key one way or another I have to turn the phone off yet again. It's a bit more difficult because I have one of those silicon rubber protector things so it takes a little longer to find the off button. But I like the protection that this cover provides. I suppose I could just wait for the timeout (which I like at 5 minutes), but that would waste some battery power that I may need later. Plus it just annoys me if it is on when I'm not using it. (Actually it is the same problem when I plug it in to the charger as well!). So who decided on this ridiculous behavior? If it is an Android thing - shame on Google. If it is a Samsung thing - shame on them. (If so I might even switch phones ... although I haven't heard of another phone that can compete with the Note). Or is it just a quirk of my ROM? (I only used GB for an hour or so, and didn't have time to observe this behavior or not - then I flashed PA which I have been using ever since.) I love this ROM although I would switch in an instant if I could get rid of my only real annoyance with this phone.
~Paul
Click to expand...
Click to collapse
Hey there Paul,
Man, that is one hell of an issue you have.
Anyway, I don't have much to advice you as I'm not using PA rom on my Note(for the moment ), but hey.. you said it for yourself that you were not able to test it thoroughly your Note before in GB right? only about an hour before flashing to PA?..hmm... logical advice I guess on my end would be to try to flash it back to GB again and observe it for 1 complete day to see if the same issue still occurs.
By the way.. you have a very sensitive Note there bud.
Again, going back to GB is the only way(if you we're to ask me), to confirm if the 'sensitivity' is still there or not anymore.
P.S. I might suggest to you to take out that screen rubber protector in the meantime also. Just use it 'naked' for a day on stock GB.
See how it goes after.
Cheers!
mtdelnero said:
let's understand this better:
Your phone is off and turns on upon disconnected from the charger, or it is already on, but you don't want the screen to lighten up when you disconnect?
If it's the first case, that's weird...mine never auto initiates...
Enviado de meu GT-N7000 usando o Tapatalk 2
Click to expand...
Click to collapse
It's the 1st case. My phone is off and charging. I remove the charging cord and the screen just turns on despite the fact that I have not hit the power button - or any button for that matter.
I think it is more weird that you don't have this problem than the fact that I do. I've googled this and found many people complaining about it, but no explanations anywhere why it works this crazy way or how to fix it. And "Noodled24" who responded to my post above is yet one more person who is annoyed by this problem. I suspect there are thousands more (maybe even millions?), most of whom don't vocalize their annoyance.
BTW I'm being pretty glib with my use of the word "off". I'm really just referring to "screen off" - i.e. what happens when you briefly press the power button. I'm aware that this is not really off in the more conventional sense. If I power down using the power button long press, then no ... I don't have any problem with it turning on all by itself. So if this is part of the confusion, sorry about that. In fact, like most phone users, I almost never do a reboot (true power off) unless something goes wrong with the phone.
And recently I've found some people complaining about this problem regarding other Android devices, so I no longer think that this is a problem just with the Note, or just with the particular rom that I am using. Although I still don't know how wide spread the problem is.
letters_to_cleo said:
By the way.. you have a very sensitive Note there bud.
Again, going back to GB is the only way(if you we're to ask me), to confirm if the 'sensitivity' is still there or not anymore.
Click to expand...
Click to collapse
I don't think my Note is "sensitive". I've very carefully removed the power cord many times (even without the rubber cover) to be sure that I am not touching the screen or any button whatsoever. And BTW the problem does not happen 90% or 99% or even 99.9% of the time. No - as far as I can tell the problem occurs 100% of the time!. So I wouldn't call my device "sensitive". I would just say that it has been improperly programmed to work in this bizarre fashion. Usually such programming mistakes can be fixed, which of course is why I have posted to this forum.
I don't think going back to GB will solve the problem. I think the same problem happened, although I can't be sure since as I mentioned before I didn't use GB for long before flashing to ICS (PA). However even if it did solve the problem, IMO going that far backwards wouldn't be a very attractive solution.
~Paul
So you don't have to go back to GB......screen turns on when unplugging my stock rooted GB. I think that is the normal behavior.
I agree, unplugging shouldn't turn on the screen, but Google does lots of things that don't make sense in real life usage.
kraz
Sent from my Beautiful, White GT-N7000 using xda premium

Categories

Resources