I have been following a guide to try and install i9000XXJP2 using Odin3
When I hit "start" in Odin3 it just says
<OSM> All threads completed. (succeed 0 / failed 0)
What do i do?
Thanks!
Try to close kies.
Yay. That did the trick.
Are there any newer updates than I9000XXJP2?
Related
Hi,
I have Galaxy note with Kernel version 2.6.35.7...LA6, Slovenia (SiMobil). As far is i understood from here:
http://forum.xda-developers.com/showthread.php?t=1329360
It's no directly rootable, so i used InitialCFRootFlasher (CF-Root-SGN_XX_SER_LA6-v5.0-CWM5). What happened is visible in the Attachment image - it stops (left it for 30 minutes and then plugged the phone out) at pushing zImage (there is zImage file in zImage folder).
I also tried downgrading to KJ1 (4th post in the link i've provided) and Odin got stuck here:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
As far as i know, i've followed all the steps correctly, i've started odin in recovery mode thingy (and with phone turned on, everything :/) and it gave pretty much the same results. I have unknown sources and USB debugging checked.
Only one thing (if it happens to be relevant): i've reset the phone from recovery mode (volume+home+power) before doing all this and the only visible difference now (except of course from everything gone) is that it now asks me for USB Connection (Copy from/to computer) and it did connected automaticly before.
Also, the keyboard layout has numbers so it reseted to the point of the latest patch.
Help wold be appreciated, thank you for your time.
0bj4ct7
what is the rom version? if its is LA6 then it it not directly rootable and you need to downgrade to root then upgrade again using mobile odin to keep root status
As i said it is LA6 and i tried to downgrade to KJ1 from the link i have posted. Thus the Odin error message in my first post :/
I'm now downloading LA1 from this tutorial:
http://forum.xda-developers.com/showthread.php?t=1535025
and will try to flash/root it with Odin.
Anyone knows why it didn't want to connect the first time? (see the Odin log)
btw my goal is to install CheckROM Note HD 6 with mobile odin after rooted.
Sorry for the double-post, but this is what happened with take 2 on Odin:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Rooted_Stock_Odex_N7000XXLA6.tar.md5 is valid.
<OSM> MODEM.tar.md5 is valid.
<OSM> CSC_N7000XEULA1_XEU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
So eventually the same thing happened: It failed to establish connection with my phone, has anyone any idea why and how could i make it work? :/
strange !!
tell you what ,just to be sure :
1. is it odin 1.8.5 , if not then download from this link http://dl.xda-developers.com/attachdl/3f3aee012a84b80d9824245ec63e1c5a/4f99a80d/8/1/5/3/7/0/Odin3-v1.85.zip
2. check your cable ,use another cable if you have any.
3. follow this method by DR.Ketan
dr.ketan said:
---------------------------------------------------------------------------------------------------------------
When No Any other method works to Root your device, use this
---------------------------------------------------------------------------------------------------------------
Note that, this will downgrade your ROM to KJ1, after that you can update it.
Download: https://rapidshare.com/files/369028110/SGN_XX_OXA_KJ1_FACTORYFS.zip
(special thanx to schiwa for providing premium a/c to host file)
Code:
Mirror for Above file (in case above link not works then only)
Download this three files
[url]http://www.mediafire.com/?7vf637co8frdqqg[/url]
[url]http://www.mediafire.com/?kkvdsf5vh8zipzi[/url]
[url]http://www.mediafire.com/?l6qqicvibzhxt18[/url]
- Tool to join them, run the following file and locate the .001 file.
[url]http://www.mediafire.com/?btrusgmd1v2d72q[/url]
- Make sure your SGN is NOT connected to your computer
- Reboot your SGN into "download mode" (Vol down + Home + Power))
- Start ODIN
- Click the PDA button, and select the "SGN_XX_OXA_KJ1_FACTORYFS.tar" file
- Connect the SGN to your computer
- Make sure "repartition" is NOT checked
- Click the START button
- Wait for the phone to reboot TWICE
- Done.
Now you have your device Rooted, Install Mobile Odin Pro n update your device to any new ROM with Mobile Odin
Click to expand...
Click to collapse
also check this thread http://forum.xda-developers.com/showthread.php?t=1329360
Thanks to all here, it turned out i actually wasn't using download, but recowery mode
After i actually pressed VOL. DOWN at the beginning it worked perfectly.
Thanks for all the answers, I'd recommend emphasizing tese keys so people like me won't repeat this.
Cheers (CheckROM works perfectly
So pretty much I'm unable to update to the lates 4.0.4 that was just released (I'm currently on stock Taiwan firmware)
1. OTA gave me this error: N7000 failed to update firmware due to network or server problem. Try software update via Settings > Software update > Update, or try usng PC kies later.
2. Kies - When I ran it this morning to update it said there was new firmware, but I needed to update Kies first before I can run it. BUT after I updated kies -- it no longer told me there was a firmware to be updated. In fact in the kies firmware section -- it is blank after my phone is plugged in and connected to the kies sync service
3. I tried booting to the Hong kong Firmware (I just want stock English/Chinese handwriting input), with Odin from http://forum.xda-developers.com/showthread.php?t=1424997 according the instructions there (autoboot/F.ResetTime) with the phone in donwload mode and all I get is this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000ZSLPN_N7000OZSLPN_N7000XXLRB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
And so nothing realy works...
Any ideas?
first reboot the phone and try odin again.
nokiamodeln91 said:
first reboot the phone and try odin again.
Click to expand...
Click to collapse
Thanks for the quick reply,I tried that this time Odin moved forward a bit.. but then Windows blue screened with IRQ not equal error..
I think it'd be ideal if I could update this OTA -- any ideas why won't let me connect to the server? (I read for the Tab10 that error occurs b/c of CSC information.. being wiped but I can view my CSC)
OTA is not the ideal way and most of the time it emerges with issue. ideal is PC odin and the safest too. if u rooted or have a custom recovery OTA will not work
I'm using stock...so it should be ok...
still dude... use the odin / kies.. as in both the whole rom is downloaded and installed on to the phone but OTA just patches the current rom and chances of screwup are more
CSC missmatch wont give ror while checking for OTA updates.. it will jst say no update avaiable
hi guys, i'm having problems and i dont have system! my phone just died. i had 4.1.2 stock rom rooted with cmw 6.0.2.9 and i've tried to install omni 442 rom and now i cant do nothing from odin or install from sd. even a stock rom. only have cwm. when i try from odin he fails and says:
Enter Cs for md5..
Check md5..do not unplug the cable..
please wait...
n70000(rom version)
checking md5 finished sucessfully..
Leave Cs..
all threads completed succeed 0 failed 0
removed
from sd:
installing /sdcard/Omni...
finding update package..
opening update package..
E: can't open /sdcard/omni....
(bad)
instalation aborted
press any key to continue
when i try to install kernell he gives me an error
(status 7)
instalation aborted.
im becaming a litle nervous, want my phone back. please help
many thanks
Have you flashed with Odin before? The logs suggest you did not press the start button.
On I537UCUAMF3 (4.2.2) Released 2013-06-21...
So the official OTA update finally got to my phone. I live in Seattle, USA.
Downloaded the 871 MB file, installed, rebooted.. 4.2.2.
what?
FINE!
Downloaded the 1.6GB update.zip, and restored during recovery. Lots of yellow text and then a reboot... into a fresh 4.2.2!
huh? ALRIGHT...
downloaded Odin 3.09, and the ML2 to get it to 4.3...
Fail! <ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
downloaded Odin 3.07, and the ML2 to get it to 4.3...
Fail! <ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help? I'm stuck and I don't know why I'm not able to update. Any thoughts? I'm on all night.
sicariusdracus said:
On I537UCUAMF3 (4.2.2) Released 2013-06-21...
So the official OTA update finally got to my phone. I live in Seattle, USA.
Downloaded the 871 MB file, installed, rebooted.. 4.2.2.
what?
FINE!
Downloaded the 1.6GB update.zip, and restored during recovery. Lots of yellow text and then a reboot... into a fresh 4.2.2!
huh? ALRIGHT...
downloaded Odin 3.09, and the ML2 to get it to 4.3...
Fail! <ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
downloaded Odin 3.07, and the ML2 to get it to 4.3...
Fail! <ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help? I'm stuck and I don't know why I'm not able to update. Any thoughts? I'm on all night.
Click to expand...
Click to collapse
If you're rooted then you're not going to be able to flash the OTA. That could be the problem there. If you're not concerned about losing data, I would try flashing NE3 (4.4.2) with Odin. Make sure the MD5s match and make sure you're using the usb cable that came with your phone.
Take a look at this thread it might help you out. Also check back in and let us know how you got it to work.
http://forum.xda-developers.com/showthread.php?t=2835481
if you're in the US, try taking your phone to a Best Buy with a Samsung Experience Shop in it. They can flash your phone to the latest rom, free of charge.
sicariusdracus said:
On I537UCUAMF3 (4.2.2) Released 2013-06-21...
So the official OTA update finally got to my phone. I live in Seattle, USA.
Downloaded the 871 MB file, installed, rebooted.. 4.2.2.
what?
FINE!
Downloaded the 1.6GB update.zip, and restored during recovery. Lots of yellow text and then a reboot... into a fresh 4.2.2!
huh? ALRIGHT...
downloaded Odin 3.09, and the ML2 to get it to 4.3...
Fail! <ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
downloaded Odin 3.07, and the ML2 to get it to 4.3...
Fail! <ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help? I'm stuck and I don't know why I'm not able to update. Any thoughts? I'm on all night.
Click to expand...
Click to collapse
I would give http://forum.xda-developers.com/showthread.php?t=2629093 this a try for starters. I was having a similar problem with 4.3 to 4.4 and that's what helped me out. Now I just need to figure out how to put a custom ROM on it, and where to get one...
I resolved this.
Turns out that it was the cable that came with the phone. I bought a new cheapy one from walgreens and it flashed just fine. *sigh*
Hello everyone,
It seems I managed to soft-brick my i9000 today. I was checking out the list of firmware available here and chose the Gingerbread 2.3.6 MultiCSC ROM for Europe. I also wanted to re-partition the device and I used the s1_odin_20100803 file during the installation process.
With the Odin v1.82 version provided in the topic, I rebooted the phone in the Download mode and it was quickly recognized by Odin. I put each file in place and started the flashing process, and I received the following messages:
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PDA_XWJW5_Sbl.tar.md5 is valid.
<OSM> PHONE_XDJV1.tar.md5 is valid.
<OSM> CSC_OXXJVC.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I get the soft brick image when I turn on the phone, and now I have several details that might give you an easier time when providing solutions:
The phone still boots in Download mode and it gets warm while it's connected, so it should also charge.
The phone is still seen by Odin when I connect it in Download mode.
I already had the required USB drivers installed and I have also installed the Nexus S ones after the brick (I've read somewhere they could help).
I tried the OneClick UnBrick tool and I get the "Failed" message.
I tried flashing the s1_odin_20100512.pit file on its own, as I've seen in an unbricking guide here, with no results.
The phone was rooted and it was running a custom ROM, above 4.0.0, although I am not sure at the moment what ROM was installed.
I used an original cable, and tried all the ports on my laptop (the only device I have available), running Windows 10 64-bit.
What should I try now? Thank you all for your help.
----------
Edit 17:39:
The phone started, and I have done the following in order to achieve this, although I am not sure about the fact that I've done the right things:
I decided to go with this guide and performed the steps listed there. First time, i left the "kernel" uncapitalized and the cmd returned the "Partition "kernel" does not exist in the specified PIT. Ending session... Releasing device interface..." message. I discovered that "KERNEL" might be a solution and decided to go with it. This time, the cmd returned the "ERROR: Protocol initialisation failed!" Releasing device interface..."
I took the battery off in order to get rid of the Download mode, and just put it back in. Then, I connected the phone via USB and the charging image appeared. Then, the phone booted normally. I'm still not convinced about what solved this.