Database Develop

New Rom 1.40 on FTP (Baked 1.40.110 & Radio 1.12)

I recently discovered that there is now a file in the Uploads/Blueangel/ directory of the xda-developers FTP named BA_1.40_radio_1.20_untested_extrom.rar
The file (and the contents extracted) can now be found here:
ftp://xda:[email protected]_Updates/BA_1.40_radio_1.20_untested_extrom
(EDIT MDAIIIUser: Moved file and corrected link)
This is a Generic 1.40 Rom with cabs from 1.40.110 Extended Rom.
I would like to thank whoever put this file up.
Note that the extrom folder in the archive contains some cabs that would not be included in a standard extended rom (eg SPB GPRS Monitor, the Extended Rom unlocker, etc), as well as some updated HTC cabs, so it is a requirement to cook your Extended rom yourself.
The cabs not natively a part of the 1.40.110 Extended Rom are:
AudioPatch_Media.CAB
CprogHook.WM2003_2577.CAB
dsp_en.cab
GPRSMonitor_2.20_WWE_BA_20041011.sa.CAB
TotalCmd.arm.CAB
xda-developers_Unlocker.CAB
Examples of HTC Extended Rom Upgrades found in this archive:
Old Album: 2.51 Build 16894
New Album: 2.51 Build 18454
Old 1.20 Photo Contacts: 1.20 Build 17957
New Photo Contacts: 1.20 Build 19167
The new Album now opens Photo Contacts 1.20 with the assign to contact command, where it previously did not.
The radio rom included in the archive is 1.12, it seems to be MDAIIIUser's 1.12 Type I Radio Rom.
The 1.40 nk.nbf is seemingly Type I: it will work with the old xda3nbftool.
This rom has Windows Media Player 10, and it seems to be a bit better on the battery. Mamaich (in a post below) has already found some issues, however. (Typical)
UPDATE:
The MMS cab file (CAB-ArcsoftMMS-20022-Magician-Generic-ENU-08Mar05.cab) included in this update causes the hardware phone end button to lock up many people's blue angels during a call. It is highly recommended that you do not use this new cab, and install the older version instead, accessable here:
ftp://xda:[email protected] Media Messaging/MMS_2.0.0.16_BA_1123.CAB

Just flashed the NK.NBF (CE ROM) portion on my PDA2k.
Boots up fine as 1.40.00 WWE on diagnostics screen.
Windows Mobile 2003 Second Edition, version 4.21.1088 (Build 15045.2.6.0).
Device Information page shows:
ROM version: 1.40.00 WWE
ROM date: 03/10/05
Windows Media Player 10.0 build 15045.
Camera applet integrated in ROM, version 2.21 (build 19307)
Broadcom Bluetooth 1.0.0 build 3900, same versions across all Bluetooth files.
Single "G" icon.
All seems well.
Now, I'm going to piece back the Extended ROM with my customizations and get it going.

This ROM has several minor problems. For example ringer.wma sounds ugly, backlight is maximal after you leave camera app, but it seems that this ROM drains battery a bit less then previous versions, even with 1.12 radio ROM.
To fix camera you can replace camera.exe with a version taken from old ROM, I use EXE from 1.31
And this ROM supports 2 different camera chips: ADCM2650 (old, my device has it) and OV7660. So maybe it is designed for new BAs with an improved camera. Though both chips are limited at 640x480.

Album_BlueAngelAKU26_Generic_WWE_RC20.CAB, Album application
AudioPatch_Media.CAB, changes audio priority to 80
BA_OEM_PA_Remove_WiFi_Logo.sa.CAB, remove extraneous Wi-Fi logo from top status bar
BA_Version_140.CAB, embeds version number for Device Information applet
Broadcom-Corporation-BT-PPC-AV-Upgrade.cab, apparently upgrades Bluetooth stack
Button9.CAB, programs extra button on slide-out keyboard
CAB-ArcsoftMMS-20022-Magician-Generic-ENU-08Mar05.cab, MMS add-on for Messaging applet
Caller_ID_BlueAngelAKU26_Generic_WWE_RC20.CAB, IA Caller ID
CprogHook.WM2003_2577.CAB, related to Phone applet (?)
CV2.41.386_wwe.CAB, ClearVue PowerPoint and PDF Viewer
Default_JMM101257_WWE_1004.CAB, Java Midlet Manager
dsp_en.cab, "Bass & Trable [sic]" (?) (likely customized)
GPRSMonitor_2.20_WWE_BA_20041011.sa.CAB, GPRS monitor
KSE_Fax_v2.09_BA_WWE_0720_unremovable.CAB, KSE Fax for CSD
MIDI561.sa.CAB, MIDI ringtone support
SetDefaultSMS.CAB, default to SMS in Inbox
TotalCmd.arm.CAB, Total Commander (likely customized)
VideoMMSB12_BA.sa.CAB, Video MMS applet
xda-developers_Unlocker.CAB, Extended ROM tools (likely customized)

So what improvements is this rom supposed to have?
(I've installed it now)
mamaich, how can you tell what camera chip a BA has?

Broadcom-Corporation-BT-PPC-AV-Upgrade.cab - adds HID and high quality audio BT profiles
CprogHook.WM2003_2577.CAB - my program, adds "contacts" button to dialer, it is not the latest build
dsp_en.cab - adds "bass&treble" customization, it works on BA and Magician devices
I don't know what are the improvements in this ROM, except that it should be more stable (because it has a newer kernel build with MS patches integrated), it has a built-in 3900 BT, so you don't need to install it and lose about 1Mb of storage space, has WMP10, and this ROM is produced by HTC (or MS) and not created from other ROMs parts like I did with 1.33.51 ROM.
I have not tested the sound quality over BT headset, maybe it is improved.
how can you tell what camera chip a BA has?
Click to expand...
Click to collapse
According to a message inside HTCCamera.dll it detects camera in my device as ADCM2650

Re: New Rom 1.40 on FTP
TheLastOne said:
So it is a requirement to cook your Extended rom yourself.
quote]
A quick Question, if I install the radio and rom, does it clear out extended rom as part of the upgrade, or do I have to do that manually first, so that it doesnt restore all my old 1.2 cabs
Click to expand...
Click to collapse

It does not touch your extended rom. I would recommend cooking your rom first, then installing the upgrade.
Thanks, mamaich for your answers.

could someone be kind enough to advise
I have tried to read through pages and pages of threads to sort out my problem....
I have been helping pass on the knowledge I have learned from you guys to others when I see them ask... and understand how it must frustrate when people ask already answered questions..
BUT.. I cannot find the answers and I am sure the answer will help many people....
I have downloaded this ROM and would dearly like to use it. I have however a number of questions if I may..:
1) I like what I see in the extended rom on this download can I just use it.. if so how and can you see any problems?
2) I cannot seem to use the rom as it sais wrong country error. I have read may threads and have downloaded xda3nbftool as described by them but cant seem to understand how to fix the file for my country code.. I have the information and this is as follows.....
Model = Ph20B
Minor version =OB
Language code = WWE
Minor = R
Operator code = O2_001
Rom version =1.31.00
Minor = 00
Extended Rom version = 1.31.139 WWE
Radio version = 1.12.00
Please help guys I am sure there will be many people struggling as I am.
thanks in advance
Stay happy
Magpie2000k

magpie2000k, I do not recommend using the current extended rom. Some of the cabs are retail software, and unless you are willing to pay for them, you will be installing time-expiring trials. One of the included cabs is even corrupted. That doesn't even take into account that carrier customization is missing, among other things. I would recommend taking the time to understand how to cook your rom properly and then make your own rom using some of the cabs included so that it properly fits your needs.
As for installing the CE Rom upgrade, I can be of help to you for that. First, since you already have the 1.12 Rom installed, remove the radio_.nbf file that is included in the archive, so that it doesn't unnecessarily upgrade again.
OK, now extract the attached rar file and put them in the same folder as the upgrade, then run fix.bat. Then run BAUpgradeUT.exe and voila.
One again, however, I stress that you should cook your rom before doing this.

Thanks
You are a star.. I take it using the fix bat you created for me the change from my details.... very kind of you..
I have tried to cook the rom. have read and thought I understood all of what was on wiki I have read every page, but when I do what I think it sais it doesnt work.. for instance I want to put the Audio patch enclosed in the supplied extended rom and it doesnt happen when I try and change the config text file it wont save it.. I have unlocked extended rom etc etc etc..
I feel that when I eventualy learn I will write a very very simple version of how to do it and put it up as reference to all...
If you can help in any way on that I would greatly appreciate it..
To all that dont know THE LASTONE is a star
stay happy
Once again thanks

mamaich said:
This ROM has several minor problems. For example ringer.wma sounds ugly, backlight is maximal after you leave camera app, but it seems that this ROM drains battery a bit less then previous versions, even with 1.12 radio ROM.
To fix camera you can replace camera.exe with a version taken from old ROM, I use EXE from 1.31
And this ROM supports 2 different camera chips: ADCM2650 (old, my device has it) and OV7660. So maybe it is designed for new BAs with an improved camera. Though both chips are limited at 640x480.
Click to expand...
Click to collapse
The ugly sound of ringer.wma is caused by the new album application. I tried installing another Album version (older) and the sound of ringer.wma is different! So, maybe they think that this sound as we hear it is more beautiful????

Funny that the Album messes with .wma files...strange, but funny.
But oh well, we all know how funny the BA can behave sometimes...

Jep, I really don't get it right, but it seems to do with any of the dll's installed. Something about that, but why??? Eat me.....
By the way, Happygoat and others. Today I talked to the dealer right here in the Netherlands and the told me they would send me the upgrade on CD to me tomorrow or monday. They confirmed that the version was
ROM1.40
Radio1.12
Ext ROM 1.40.110
Hope I will receive it soon!

That's good. I guess we can use it to ensure we have all the proper extended rom stuff.
Thanks, j_metselaars.

As allready mentioned, there are some minor probs with a few applications in this Extended_ROM.
The most annoying bug is the camera. When used, it sets to the highest brightness, and doesn't set back to your default brightness after use. I cooked the FixCamera_18157.sa into my Extended_ROM, it sets the camera-app back to the build 2.21B18157 from the 1.33.51-Mamaich-ROM, but it works allright.
Remember, when cooking, that the CprogHook.WM2003_2577.CAB (by Mamaich) and the AudioPatch_Media.CAB will need you to tap away the "This was build for a previous ...". Don't disable your touchscreen in the case you will be using one of these programs (= don't execute the "EXEC:\Extended_ROM\TPDisable.exe" in your 'Config.txt' hidden in your Extended_ROM).

j_metselaars said:
By the way, Happygoat and others. Today I talked to the dealer right here in the Netherlands and the told me they would send me the upgrade on CD to me tomorrow or monday. They confirmed that the version was
ROM1.40
Radio1.12
Ext ROM 1.40.110
Hope I will receive it soon!
Click to expand...
Click to collapse
Great news...looking forward to exploring the Ext. Rom...coz Imate has not posted the new ROM yet...
Thanks!

camera problem
I have this message : unable to start preview mode . Internal error. 36001:101:1

Remember, when cooking, that the CprogHook.WM2003_2577.CAB (by Mamaich) and the AudioPatch_Media.CAB will need you to tap away the "This was build for a previous ...". Don't disable your touchscreen in the case you will be using one of these programs (= don't execute the "EXEC:\Extended_ROM\TPDisable.exe" in your 'Config.txt' hidden in your Extended_ROM).
Click to expand...
Click to collapse
HugoFranssen, funny you mention that. Not knowing what AudioPatch_Media.CAB was, I encountered that exact problem. Boy what a pain that was .

Thanks to everybody in this forum again.
Will install the upgrade soon may be after a week time.
My 2s is now in hospital (ACCORD) after I dropped it on the ground.....

BA WM5 ROM Kitchen (Bepe's)

BA WM5 ROM Kitchen (Bepe's)
All of this Guide is taken from bepe's ROM Kitchen, and also the dev tool are taken from Bepe's, so all credits goes to Bepe for his great method and tools!, currently not All the file are linked except for my AKU3.2 OS + LOC & some OEM packet, since I dont hv permission yet from bepe, bepe is currently on vocation, but u can always go to bepe site here to get the old AKU files (OS, LOC, OEM):
http://buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&id=23392&catid=64
ROM Kitchen is a tool to cook your personal Windows Mobile 2005 ROM by the packages you need.
.NET Framework v2.0 must be installed!
Device-dependent packages:
DEV:
DEV_BA_v1.01+SAP.rar
ROM:
ROM_BA_v1_5.04.06_.rar - 32MB RAM
Independent packages: !!! Both should have the same AKU !!!
(Currently only my AKU3.2 Test Link Is available, I dont hv permission yet, since bepe still on vacation, check the above bepe's link for more info about Bepe AKU)
OS:
OS_AKU_2.0_v1.50.rar - AKU 2.0 (Build 14847)
OS_AKU_2.2_v1.50.rar - AKU 2.2 (Build 14928)
OS_AKU_2.3_v1.50.rar - AKU 2.3 (Build 14955)
OS_AKU_3.0_v1.51.rar - AKU 3.0 (Build 15096)
OS_AKU_3.2_TEST.rar - AKU 3.2 (Build 15605)
LOC:
LOC_AKU_2.0_v1.50_[ WWE | GER ].rar - AKU 2.0
LOC_AKU_2.3_v1.50_[ WWE ] - AKU 2.3
LOC_AKU_3.0_v1.50_[ WWE ] - AKU 3.0
LOC_AKU_3.2_TEST_[ WWE ] - AKU 3.2
OEM PACK:
ArcsoftMMS v3.0.7.19_WWE
Frequency Tuner v1.5
GB SOFT Tweak
IA Camera Oem
XCPUScalar
TaskMgr v1.6
more maybe will be added by others, lets work together guys...
How-To build a ROM:
Extract the DEV folder
Extract one ROM to DEV
Extract one OS to DEV
Extract one LOC to DEV
Extract all OEM Packages you need to OEM
Run CreateOS.exe and click the button
Run CreateROM.bat
Done, your new ROM is located at DEV/Temp/NK.nbf
How-To build ur own OEM Package:
An OEM Package is just a simple folder containing files and registry settings for the ROM
First of all you'll need a GUID number for your Package.
Go to http://kruithof.xs4all.nl/ uuid/uuidgen to get one.
In my case:
283b9db7-cb03-4c1b-820e-ca49b2c3b5db
Necessary steps:
1. Create a new folder:
Dev/OEM/[Your package name]/
2. Create a empty text file:
Dev/OEM/[Your package name]/283b9db7-cb03-4c1b-820e-ca49b2c3b5db.dsm
(CreateOS.exe will finish this file for you)
If needed:
3. Create an UNICODE text file:
Dev/OEM/[Your package name]/283b9db7-cb03-4c1b-820e-ca49b2c3b5db.rgu
This file could be used to add registry entries to the ROM
First line is:
REGEDIT4
...
and there MUST be a empty line at the end!!
4. Create an UNICODE text file:
Dev/OEM/[Your package name]/initflashfiles.txt
This file could be used to create folders or copy files on the ROM.
Example: Open Dev/LOC/initflashfiles.dat using a text editor
Copy all files you need to Dev/OEM/[Your package name]/
First Big Thanks to MAMAICH for his great tools that makes this possible, and BEPE for this briliant method of buildin rom that make it really easy for everyone and also BIG Thanks to indra9110 for lot of help, thanks dra...really appreciate it bro...
This is still on test stage, so trust me, something might be wrong or anything, I'm really need an input on this method, since I'm not so familiar with bepe's briliant way, he'll do it better I supposed? hehe....
Midget_1990, xplode, Black6spdZ, thingonaspring, logout , tautara and others input and help will be a huge help for make it better.
regard,
Helmi
Update:
by thingonaspring
A full changelog is in "changes.txt". Lots of fixes, cleanups and speedups included, power management improved, pagging pool etc.
please go here and be thankfull to thingonaspring... thanks man :wink:
The 1.1 archives are here :-
ftp://xda:[email protected]/Uploads/Blue Angel/AKU3.2/KITCHEN_1.1
The 1.2 archives are here :-
ftp://xda:[email protected]/Uploads/Blue Angel/ROM_KITCHEN_1.2/DEV.zip
ftp://xda:[email protected]/Uploads/Blue Angel/ROM_KITCHEN_1.2/LOC.zip
ftp://xda:[email protected]/Uploads/Blue Angel/ROM_KITCHEN_1.2/OEM.zip
ftp://xda:[email protected]/Uploads/Blue Angel/ROM_KITCHEN_1.2/OS.zip
ftp://xda:[email protected]/Uploads/Blue Angel/ROM_KITCHEN_1.2/ROM.zip
Optional OEM Packages are available individually here :-
ftp://xda:[email protected]/Uploads/Blue Angel/ROM_KITCHEN_1.2/Packages/Camera.zip
ftp://xda:[email protected]/Uploads/Blue Angel/ROM_KITCHEN_1.2/Packages/Backup.zip
ftp://xda:[email protected]/Uploads/Blue Angel/ROM_KITCHEN_1.2/Packages/TCPMP_072RC2.zip
ftp://xda:[email protected]/Uploads/Blue Angel/ROM_KITCHEN_1.2/Packages/TaskMgr 1.6.zip
ftp://xda:[email protected]_KITCHEN_1.2/Packages/Total Commander 2.zip
ftp://xda:[email protected]/Uploads/Blue Angel/ROM_KITCHEN_1.2/Packages/PocketRar3.60.zip
ftp://xda:[email protected]/Uploads/Blue Angel/ROM_KITCHEN_1.2/Packages/Ringtones.zip
ftp://xda:[email protected]/Uploads/Blue Angel/For Helmi/MMS_3.0.16.16.zip
ftp://xda:[email protected]/Uploads/Blue Angel/For Helmi/mamaich_overclock.zip
Task Manager 1.9
psShutXP
vbar
And the full changelog is here :-
ftp://xda:[email protected]/Uploads/Blue Angel/ROM_KITCHEN_1.2/changes_1.2.txt

Way to go helmi
Hi helmi,
Coupla broken links....
OS link should be
ftp://xda:[email protected]/Uploads/Blue Angel/ROM_KITCHEN/OS/OS_AKU3.2_TEST.rar
ROM Link shoudl be
ftp://xda:[email protected]/Uploads/Blue Angel/ROM_KITCHEN/ROM/nk.rar
let's get some OEM packages up here pronto!

wow, thanks helmi_c
looking forward for ppl to post nice packages
imatrix

Hi helmi, this is real good stuff.
What's the intention however? I quite like the current state of affairs with everyone focussing on one ROM. One ROM to rule them all etc.
Is the idea for people to start creating their own? I'd rather see everyone pull together to produce one fantastic BA WM5 ROM. We aren't all that far away from it just now. But if we start to fragment the effort, it'll slow things right down.

I made many packages for my Himalaya. It would be great to make some place on ftp to share them. This place shouln't be device specific (as I remember some of packages are uploaded into BA or Wizard section)
But better place would some wiki page, where people could write which package works on which hardware.
Also it's good idea to notice in package name which version of software it is, and if it's UPXed or not (I'm UPXing almost all packages gaining about 50% of space)
I have:
AKU 2.2+ Title Bar Clock
AutocompletePL
Call2Contact_1.0
CamRecSvc_by_ADX
Cambridge_bluetooth (Himalaya)
Compact_Framework_2
DKToday 1.80
DSP
DorucenkaSMS
ExtROMUnlock_UPX
File Support
FlightMode (Himalaya?)
GB-SOFT Tweak
MagicButton_2.0_UPX
NetCFVersion
O2_Operator_UPX
PQView
Regedit_PHM_0.70+TRE_0.90_UPX
Reset
SimMessaging 0.04
SoftKeyAppletEx
TaskMgr1.6
Tcpmp_0.72RC1_UPX
TodayAgenda
Toggle
Total Commander 2
TreoSpeedDial_UPX
VJVolubilis_0.41_UPX
WM2k5 SMS Alert Fix (Himalaya?)
WM5 NewMenu_1.0_UPX
WM5torage 1.7 (seems 1.5 is more stable)
XCPUScalar
idiffce_0.3_UPX
Personally i miss AEButton package but can't do it.
Some of them are unfinished (NET CF2 is the most important of them), some of them are untested because i'm still in process of converting new packages
And it would be nice to group packages by type, maybe place them in submenus

Re: Way to go helmi
thingonaspring said:
Hi helmi,
Coupla broken links....
OS link should be
ftp://xda:[email protected]/Uploads/Blue Angel/ROM_KITCHEN/OS/OS_AKU3.2_TEST.rar
ROM Link shoudl be
ftp://xda:[email protected]/Uploads/Blue Angel/ROM_KITCHEN/ROM/nk.rar
let's get some OEM packages up here pronto!
Click to expand...
Click to collapse
oops... fixed... thanks thingonaspring... hopes we can be more active on this thingonaspring... :wink:
imatrix said:
wow, thanks helmi_c
looking forward for ppl to post nice packages
imatrix
Click to expand...
Click to collapse
its still early stage, we need more people involved, but maybe with thingonaspring here (I believe he ready to put some nice stuff here), midget, blackspz, logout, tautara, xplode , everyone who willing to work as a team, for me its doesnt matter who build/make the rom, I believe we just want a ROM that we can use right? so working together on the fix / update issues would produce a "Best" or "less bug" rom, plus with ability to customizing it for personal use. well, at least that my intention. hopes we all can work together.

Marx2 said:
I made many packages for my Himalaya. It would be great to make some place on ftp to share them. This place shouln't be device specific (as I remember some of packages are uploaded into BA or Wizard section)
But better place would some wiki page, where people could write which package works on which hardware.
Also it's good idea to notice in package name which version of software it is, and if it's UPXed or not (I'm UPXing almost all packages gaining about 50% of space)
I have:
AKU 2.2+ Title Bar Clock
AutocompletePL
Call2Contact_1.0
CamRecSvc_by_ADX
Cambridge_bluetooth (Himalaya)
Compact_Framework_2
DKToday 1.80
DSP
DorucenkaSMS
ExtROMUnlock_UPX
File Support
FlightMode (Himalaya?)
GB-SOFT Tweak
MagicButton_2.0_UPX
NetCFVersion
O2_Operator_UPX
PQView
Regedit_PHM_0.70+TRE_0.90_UPX
Reset
SimMessaging 0.04
SoftKeyAppletEx
TaskMgr1.6
Tcpmp_0.72RC1_UPX
TodayAgenda
Toggle
Total Commander 2
TreoSpeedDial_UPX
VJVolubilis_0.41_UPX
WM2k5 SMS Alert Fix (Himalaya?)
WM5 NewMenu_1.0_UPX
WM5torage 1.7 (seems 1.5 is more stable)
XCPUScalar
idiffce_0.3_UPX
Personally i miss AEButton package but can't do it.
Some of them are unfinished (NET CF2 is the most important of them), some of them are untested because i'm still in process of converting new packages
And it would be nice to group packages by type, maybe place them in submenus
Click to expand...
Click to collapse
this is exactly what I want.. people share their stuff.. and make our BA more rich with feature/option on spesific stuff... yes u might modify anything if u thing necessary (as long u didnt delete it ...lol) and inform about the update, so others know about it.
fraser said:
Hi helmi, this is real good stuff.
What's the intention however? I quite like the current state of affairs with everyone focussing on one ROM. One ROM to rule them all etc.
Is the idea for people to start creating their own? I'd rather see everyone pull together to produce one fantastic BA WM5 ROM. We aren't all that far away from it just now. But if we start to fragment the effort, it'll slow things right down.
Click to expand...
Click to collapse
hmm... maybe that could happen, but I beleive if we make it together? maybe it'll slow a bit, but more bug will be fix/resolve, share experience, it doesnt matter about who makes the rom. well, we'll see about this proggress...

About ROM Kitchen and 'the One ROM'
The ROM Kitchen is a wonderful idea.
IMO, things should walk towards stabilizing a base ROM with all features working (including WModem ).
But we also shouldn't leave to the users the effort to create their own ROMs, that's too troublesome.
Maybe all devs could get closer together and agree on some tools to integrate to it, and call it the 'XDA ROM', instead of Bepe, Helmi, TuMa or whatever.
So, we could have a 'BASE ROM', meant to be used on the ROM Kitchen, and the XDA ROM supported by all devs, built from the BASE ROM with tools which were agreed to be useful, so the less geeky can have a nice working ROM to update their BAs with. With things like PHM regedit, ability to choose between BT stacks, GB Soft Tweak and other useful stuff.
That does not stop the devs from having their own name branded ROMs placed on the site...

Agreed, a base ROM system is the best of both worlds. Say I was to pickup a base ROM and build on it, is there anything I can do that can't be done using ExtROM installers? Sure, you get to put stuff in the ROM, but it's already stuffed full it would seem!
I remember reading about an anti-theft application that you could put in the ROM. If the phone number changed, it would start sending you text messages telling you about the current owner/thief. Is this an option for the BA once we get a kitchen?

I will test it tonight after work, , i will test my latest SAP package and maybe if it works OK i will post it in this thread
i still have to dump some devices roms to see what can i get from them, at this moment i have new versions of CommManager and WlanMgr and maybe fix for wifi integration, but first should test it...
Once again i want to thank everyone involved in WM5 development for BA
It will be a very long list .. so i will mention just a few names:
mamaich, bepe, helmi, logout, tuatara, Midget_1990 and many more

Right way to roll in UPXed system apps?
OK, I have just decompressed all files, but I have no OEM packages rolled int yet.
I have tested many UPXed system dlls and exes, and I would like to roll them in to save space, in place of the original ones.
Where do I put them?

Attempted to build a base rom from the files provided and i am getting an error after clicking on CreateOS. The error is "Error: OS\2849e391-1e39-4a98-87b9-53932dec51d3 is not listed in packages.sof". How do you add or remove packages listed in the sof file or is that possible? How can i remedy this error?
Thanks in advance

i have 3 errors for 3 folders in os folder, i just moved them into oem folder
more results soon

I had the 3 errors too, and moved the files to OEM. The ROM image was built (apparently) was successfully built.
BUT, the million dollar question is:
How much free space do we have without adding any OEM stuff at all (a BARE ROM)?
We need to know our KB budget to know how much we can roll in...

I have the same error. What did you move exactly?
OK i have it.
It's:
2849e391-1e39-4a98-87b9-53932dec51d3
e3055288-19cd-4317-9125-a63654628fb3
fb30fdba-23d9-4a92-af78-041b1ee1d46c

Move them from the OS directory to the OEM directory

Marx2 said:
I have the same error. What did you move exactly?
Click to expand...
Click to collapse
When you get the error, move the folder with that name to OEM.
Another subject:
Hey all,
I have unpacked the ROM (nk.nba), replaced all folders ending with .exe and .dll with the actual file contained in each, and UPXed all exes and dlls.
Suspicious files are automatically skipped by UPX, and I compressed them with 'upx -i --compress-exports=0 --compress-resources=0 --strip-relocs=0', because when I was testing compressing (Office) with the default options, it didn't work. All compressible files worked, with these options.
The 'dump' contents went from 52,3 MB to 30,6 MB.
The catch: I don't know if the nk.nba generated from them will work
I haven't tried repacking it into an nba and flashing a ROM. Does anyone want to experiment with this file?
EDIT:
After BuildImgfs.exe finished, it reported the following:
Total Sectors: d2a8
Used Sectors : b984
Free Sectors : 1924
In decimal: 53928,47492,6436.
How big is a IMGFS sector? 512bytes? 1KB? more?
/EDIT

i did it with a few files
simply deleted them and created OEM package with UPXed versions
My Himalaya is flashing now AKU 3.2!
It flashed ok, hovewer entering BT settings hangs device
I will wait for Bepe
EDIT: BT stack is my fault cause by UPXing it

i create my rom ... very fast
but when i turn off my 9090 , it don't turn on ( display is balack) :evil:
any solution?

hi,
how to build a SD-Card Images?

4-11-2010 LAST Xperia ROM & KITCHEN (Ervius) comeback

DEV STOPPED DUE TO BROKEN DEVICE
After 1/5 years of flashing and testing my device has died so is time to move on to an X10
i am glad that i could contribute to this comunity and improve an wonderful device released without updates and proper software
new Simplicity 035
!to lock device press long end key
ROM
http://hotfile.com/dl/80099972/d92e93b/X1_Simplicity_035.rar.html
Kitchen
http://hotfile.com/dl/79038370/1993115/X1_Simplicity_010_kitchen.rar.html
NEW ROM X2
http://hotfile.com/dl/46430983/30d4a41/r10bx2.rar.html
Thanks to all cooks and clefs that did not forget the real purpose of this forum and share !
______________________________________________________________________
______________________________________________________________________

Bepe Kitchen
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
BEFORE REPORTING ANYTHING PLEASE SPECIFY KITCHEN VERSION AND LANGUAGE
I CAN NOT TRACK PROBLEMS WITHOUT THIS
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
______________________________________________________________________
Visual Kitchen with real 6.5 XIP RHODIUM BASE
______________________________________________________________________
NEW KITCHEN BASED ON MIXED OEM FROM WM DEVIECES
http://hotfile.com/dl/39478945/86eb812/k2.54_10.rar.html
Visual Kitchen with real 6.5 XIP X2 BASE
http://hotfile.com/dl/39711502/da4485d/k11x2.rar.html
BUGS
for gps bug in wm6.1 just copy dnsapi.dll from any oem to the new oem
______________________________________________________________________
OTHER PROJECTS
!!!! GAME WARCRAFT 2 WVGA (WARGUS) fixedhttp://forum.xda-developers.com/showthread.php?p=3491567#post3491567
!!!! GAME STARCRAFT 2 WVGA (STRATEGUS ENGINE)http://forum.xda-developers.com/showthread.php?t=497086
Regional Time Clock Settings http://forum.xda-developers.com/showthread.php?p=3623077#post3623077
______________________________________________________________________
______________________________________________________________________

Bepe Kitchen Intructions
USAGE.....
unpack the core kitchen to c: drive
unpack an sys&xip inside
unpack an oem inside
Run 2_Create_ROM.bat
check KITCHEN\INFO\WMReloclog.txt latest line
if it last adress is starting with 01 rom will boot if not
recmod some dlls and try again
____________________________________________
Recmoding
nueRecMod.exe module_name
copy resulting file in place where module was
Folders that can be safely recmoded
BROWSING*
ConfettiCore*
CHome*
BROWSINGCORE
AdobeFlash*
browsingie*
Entertainment*
IPSECVPN*
MSTag*
Perfbox*
RemoteDesktopMobile*
Skybox*
Skymarket*
Transcriber*
VoiceCommand*
Webview*
WelcomeCenter*
WindowsLive*
WMWidgets*
! * means all folders that have the same name
big thanks to bepe,duttythroy and all other that made this possible for their work in this comunity
and itje for all his contributions
Da_G for wm6.5 porting and bug solving

which version of the blackstone are you taking them from?
I've not used the very latest rom yet, but the best Dshow seem to be from the 2nd quartz rom.
So you've got an X1 now? Are you likely to be getting involved in the android dev for it?

fards said:
which version of the blackstone are you taking them from?
I've not used the very latest rom yet, but the best Dshow seem to be from the 2nd quartz rom.
So you've got an X1 now? Are you likely to be getting involved in the android dev for it?
Click to expand...
Click to collapse
next project
for now i am triing to put an kitchen up
BR

Uploading ?
jerpelea said:
Hy all,
i have a new kitchen for you
is based on 2AA original xperia and latest Blackstone OEM and SYS
UPLOADING.....
Click to expand...
Click to collapse
Hi Jerpelea,
Have you been able to get this uploaded somewhere?
I am happy to put up a Rapidshare mirror when you do.
-Kodiak7

lookin forward to see a great change.... wishing to cooked it myself...

kodiak7 said:
Hi Jerpelea,
Have you been able to get this uploaded somewhere?
I am happy to put up a Rapidshare mirror when you do.
-Kodiak7
Click to expand...
Click to collapse
i was working on all known bugfixes
removed pannels
added tf3d (blackstone)
added calculator
fixed storage
fixed comm manager
fixed dialer
i hope to upload today the latest version
added UPX compression
BR

Feels like a dumb question, but can we download this somewhere? I'd like to experiment on cooking my own rom. I don't have the illusion I can do it better than Itje or Jack, but some experience on how hard it is to release a stable rom would be nice......

Kitchen Launched

Error building boot.hv
Using all of the default application selections, I receive the error popup 'Error building boot.hv!'
The log.txt file in the temp directory is:
ERROR: C:\MacB\private\winceos\COREOS\filesys\reg\reghive\.\hive.c line 877: FS: Registry Exception Handler
Microsoft (R) RGUComp Version 1.0.000
Registry file processor and hive builder.
Copyright (C) 2004 Microsoft Corporation All Rights Reserved.
built: Nov 19 2004 15:17:13
wmain: (RGUComp) !ERROR failed building BOOT hive
*EDIT* Looks like the kitchen doesn't work on Windows 7, but it does on Vista.

Created and flashed with this, pretty impressed with the speed of it...only thing I see is that the bot up is very slow,but once the today screen comes up...very fast.. Had to create and flash 2 times as was stated in the directions for this.
WC

downloading. and thank you for this.
will let you know how it goes.

new diamond 2 sys and oem launched
BR

cool. will have a look when it's done.

jerpelea said:
new diamond 2 sys and oem launched
BR
Click to expand...
Click to collapse
hi there, i've tried your new kitchen with diamond 2 oem and its working great, thanks for sharing this kitchen.
1. i just noticed that i takes a while for the album tab to load pictures & for the music tab to search music.
2. also in settings tab, my contact card does not do anything.
3. and also in home tab, the camera soft key is not working.
4. the hardware keyboard is messed up.
other than that it works great & fast including in landscape mode.
will still test some more with this new kitchen.
thanks again.
edit:
1. i noticed that the contact editor is not working properly, when adding favorite people manila restarts.
twisted

...Cool...New Manila

jerpelea said:
Hy all,
i have a new kitchen for you
is based on 2AA008 original xperia and latest Blackstone OEM and SYS
Download
SYS 20769(20769.1.4.5) WM6.1 from HTC Blackstone shipped rom
kitchen 1.029 http://rapidshare.de/files/45443253/KITCHEN_X1i_20769_20769_6.1_1.029.rar.html mirror http://www.dump.ro/fisiere/kitchen-x1i-20769-20769-6-1-1-029-rar/93981/oKtbw0sLEO1CwZYL
kitchen 1.514 http://rapidshare.de/files/45566055/KITCHEN_X1i_20769_20769_6.1_1.514.rar.html mirror http://www.dump.ro/fisiere/kitchen-x1i-20769-20769-6-1-1-514-rar/95204/Z8SyGwaHupE46yE5
SYS 21014(21014.1.6.0) WM6.1 Beta bbs.xbeta.cn
kitchen 1.515 UPLOADING....
SYS 21159(21159.5.0.0) WM6.5 Beta 3 from ppcgeeks.com
kitchen 1.515 UPLOADING....
big thanks to duttythroy (sources) and SatScan (dump)
Click to expand...
Click to collapse
Excellent job!!! I'm looking forward to the WM6.5 kitchen. I wanna see if i can put the new tfl3d on it.

yes it really is superb, the new manilla has some of the same errors as ITJE's beta 1.
Contacts mainly, but otherwise it's very well done. build is very easy.
OH and it does work in WM7, it's just some of the tools used need setting to be vista compat mode (running as admin helps as well).

fards said:
yes it really is superb, the new manilla has some of the same errors as ITJE's beta 1.
Contacts mainly, but otherwise it's very well done. build is very easy.
OH and it does work in WM7, it's just some of the tools used need setting to be vista compat mode (running as admin helps as well).
Click to expand...
Click to collapse
I think there is a deeper issue with the contacts tab because tfl3d still crashes when u do certain things in the contacts tab. I wonder if we are missing something important....

new rom and kitchen 21040(Build 21040.1.6.0) from HTC snap

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
BEFORE REPORTING ANYTHING PLEASE SPECIFY KITCHEN VERSION AND LANGUAGE
I CAN NOT TRACK PROBLEMS WITHOUT THIS
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Download WWE kitchen005(OLD ONE 24.04.09)
http://rapidshare.de/files/46885174/KITCHEN_Breeze_21040_21040_6.1_0.005.rar.html
Download WWE kitchen 006(NEW ONE 27.04.09)
http://www.sendspace.com/file/3ddkoz
Download WWE 007 ROM4.05.09 (fixes for all bugs)
http://www.sendspace.com/file/bssdyi
big thanks to bepe,duttythroy and all other that made this possible for their work in this comunity
and itje for all his contributions

Oem contents
OEM.cer
OEMAPPS
OEMCamera
OEMDrivers
OEMMISC
OEMOPERATORS
OEMVersion
OEM_DPI_131
OEM_Lang_0409
OperatorPkg
PACKAGE_APP_AutoKeylock
PACKAGE_APP_CHomeConfigurator 1
PACKAGE_APP_PHMRegistryEditor
PACKAGE_APP_Reboot
PACKAGE_APP_RSSHub
PACKAGE_APP_Slick
PACKAGE_Breeze_HTCColdBoot
PACKAGE_Captain_Arcsoft_MMS
PACKAGE_Captain_BandSelect
PACKAGE_Captain_BandSelect_0409
PACKAGE_Captain_BluetoothSecurity
PACKAGE_Captain_BluetoothSecurity_0409
PACKAGE_Captain_BootLauncher
PACKAGE_Captain_BootLauncher_0409
PACKAGE_Captain_CallBarringPassword
PACKAGE_Captain_CallBarringPassword_0409
PACKAGE_Captain_ClearStorage
PACKAGE_Captain_ClearStorage_0409
PACKAGE_Captain_CommManager
PACKAGE_Captain_CommManager_0409
PACKAGE_Captain_ConcurrenceMgr
PACKAGE_Captain_ConcurrenceMgr_0409
PACKAGE_Captain_ContactUtilityEngine
PACKAGE_Captain_ContactUtilityEngine_0409
PACKAGE_Captain_DataDisconnect
PACKAGE_Captain_DataDisconnect_0409
PACKAGE_Captain_DRMMiddleware
PACKAGE_Captain_DRMMiddleware_0409
PACKAGE_Captain_DShow
PACKAGE_Captain_DShow_0409
PACKAGE_Captain_Enroll
PACKAGE_Captain_Enroll_0409
PACKAGE_Captain_FDN
PACKAGE_Captain_FDN_0409
PACKAGE_Captain_FlashLiteShareDLL
PACKAGE_Captain_FlashLiteShareDLL_0409
PACKAGE_Captain_GoogleMaps
PACKAGE_Captain_GPRSAuth
PACKAGE_Captain_GPRSAuth_0409
PACKAGE_Captain_HSDPASwitch
PACKAGE_Captain_HSDPASwitch_0409
PACKAGE_Captain_HTCAnimation
PACKAGE_Captain_HTCAnimation_0409
PACKAGE_Captain_HTCMessage
PACKAGE_Captain_HTCMessage_0409
PACKAGE_Captain_HTCSlidingPanel
PACKAGE_Captain_HTCSlidingPanel_0409
PACKAGE_Captain_IME_Smartphone_Western_TMOUS
PACKAGE_Captain_InvokeSIMMgr
PACKAGE_Captain_InvokeSIMMgr_0409
PACKAGE_Captain_JBlendJava_6_1_TMOUS_ALL
PACKAGE_Captain_LockStreamDRM
PACKAGE_Captain_LockStreamDRM_0409
PACKAGE_Captain_mHubVO
PACKAGE_Captain_mHubVO_0409
PACKAGE_Captain_MS_AdobeReaderLE
PACKAGE_Captain_Mute
PACKAGE_Captain_Mute_0409
PACKAGE_Captain_MyCPL
PACKAGE_Captain_MyCPL_0409
PACKAGE_Captain_NewMailAccount
PACKAGE_Captain_NewMailAccount_0409
PACKAGE_Captain_PhoneCanvas_TMUS
PACKAGE_Captain_PhoneCanvas_TMUS_0409
PACKAGE_Captain_PictureEnhancement
PACKAGE_Captain_PictureEnhancement_0409
PACKAGE_Captain_PKG
PACKAGE_Captain_PKG_0409
PACKAGE_Captain_PowerInformation
PACKAGE_Captain_PowerInformation_0409
PACKAGE_Captain_PowerManagement
PACKAGE_Captain_PowerManagement_0409
PACKAGE_Captain_Redial
PACKAGE_Captain_Redial_0409
PACKAGE_Captain_RingtonePlugin
PACKAGE_Captain_RingtonePlugin_0409
PACKAGE_Captain_SharedModules
PACKAGE_Captain_SharedModules_0409
PACKAGE_Captain_SIMLock
PACKAGE_Captain_SIMLock_0409
PACKAGE_Captain_SIM_MGR
PACKAGE_Captain_SIM_MGR_0409
PACKAGE_Captain_STK_Service
PACKAGE_Captain_STK_Service_0409
PACKAGE_Captain_STK_UISP
PACKAGE_Captain_STK_UISP_0409
PACKAGE_Captain_StorageLow
PACKAGE_Captain_StorageLow_0409
PACKAGE_Captain_SystemInfo
PACKAGE_Captain_SystemInfo_0409
PACKAGE_Captain_USSD_Service
PACKAGE_Captain_USSD_Service_0409
PACKAGE_Captain_VisibilityTimeout
PACKAGE_Captain_VisibilityTimeout_0409
PACKAGE_Captain_VoiceRecorder_AudioPostcard
PACKAGE_Captain_VoiceRecorder_AudioPostcard_0409
PACKAGE_Captain_VolumeControl
PACKAGE_Captain_VolumeControl_0409
PACKAGE_Captain_YouTube
PACKAGE_Captain_YouTube_0409
Registry_Hide SIM Contacts
Registry_Ring_Tone
Registry_SecurityOff

Eagerly anticipating...

rom is almost ready
i am searching for bugs
youtube is unusable (maybe just for now)
using Rose dialer
control pannel having unusable links
camera not working yet
in 1-2 days i will release an final rom and kitchen
br

jerpelea said:
rom is almost ready
i am searching for bugs
youtube is unusable (maybe just for now)
using Rose dialer
control pannel having unusable links
camera not working yet
in 1-2 days i will release an final rom and kitchen
br
Click to expand...
Click to collapse
thank you!

first alpha rom is up
search for bugs
thanks
br

-In setting Menu --> the connections link does not work. "The Setting could not be opened."
-Then under Settings/Power the "Power information" is unavailable.
-Google Maps link in the menu does not work.(components missing)
Then I tried installing HardSPL before this rom and ran into some problems,
went though the guide and got up to "SPL 1.10 and CID HTC__A07" with the "RUU_MTeoR_1.34.251.1_1.38.00.10_HTCEUR_SHIP" rom. Then Application unlocked. That all went well.
Then in Step 8,"check for spl if it sais 2.05 you can go further if not read the fisrt guide" I don't have SPL2.05.
I ignored this, since the current SPL 1.10 is newer, and copied the HardSPL files to the Phone root and the Breeming to the SD card. If I run SPL then and hold Power+Camera It does say "SPL-1.01 " but after reboot there are no onscreen instructions to follow. And the SPL goes back to 1.10.
Any Ideas on what I am missing?
Thanks

Bad_German said:
-In setting Menu --> the connections link does not work. "The Setting could not be opened."
-Then under Settings/Power the "Power information" is unavailable.
-Google Maps link in the menu does not work.(components missing)
Then I tried installing HardSPL before this rom and ran into some problems,
went though the guide and got up to "SPL 1.10 and CID HTC__A07" with the "RUU_MTeoR_1.34.251.1_1.38.00.10_HTCEUR_SHIP" rom. Then Application unlocked. That all went well.
Then in Step 8,"check for spl if it sais 2.05 you can go further if not read the fisrt guide" I don't have SPL2.05.
I ignored this, since the current SPL 1.10 is newer, and copied the HardSPL files to the Phone root and the Breeming to the SD card. If I run SPL then and hold Power+Camera It does say "SPL-1.01 " but after reboot there are no onscreen instructions to follow. And the SPL goes back to 1.10.
Any Ideas on what I am missing?
Thanks
Click to expand...
Click to collapse
thanks for bugs i will solve them and release the kitchen
i cant help you with the other problem just follow the guide
br

all found bugs solved
rom and kitchen uploaded
br

jerpelea said:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
BEFORE REPORTING ANYTHING PLEASE SPECIFY KITCHEN VERSION AND LANGUAGE
I CAN NOT TRACK PROBLEMS WITHOUT THIS
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Download WWE kitchen
http://www.megaupload.com/?d=NS38YRCW
Download WWE 001 ROM13.04.09
http://www.megaupload.com/?d=WGHF9P17
big thanks to bepe,duttythroy and all other that made this possible for their work in this comunity
and itje for all his contributions
Click to expand...
Click to collapse
i can not open this web site?why?

I need to read chinese sms,does it support chinese well ?
or I need to wait for the chinese version that translated by some one
thanx

Thank you for your work, jerpelea
I have a htc breeze device, just flashed this 21040.16.0 rom
This rom is way faster than futureshock`s rom I have used previously.
I like a new touch (don`t remember if it was in the rose rom also) that it vibrates when beeps end and you can speak.
If anyone is troubled with t9 absence here is the solution
The only left problem is non-working camera. I wonder if there might be a solution.
Regards.

Hi J, Excellent work, besides the missing camera app I picked up another "bug", in Kitchen 21040(Build 21040.1.6.0). I find the Start menu items do not show, i can browse through them and open them but cant see them... sounds strange to describe but the bottom line is that it looks like the start menu's font and icons are white and the background is also white...
BTW, this was from the Kitchen, have just brought down the ROM, will try use that, perhaps I changed something in the kitchen by accident.

I flashed ROM cooked by J. Start menu is visible. Everything is ok.

tehre are still 2 bugs
camera and bluetooth bug
i will solve them when i will have time
i hope this week
br

Some more bugs
1. Each time I try to change home screen from the settings ,menu I get "Unable to save settings" error. HTC Home is the only working option. Now I am allowed to change Color scheme but yesterday I was not.
2. There ara also troubles with establishing internet connection from 3d party software like slick or jblend java machine (it doen`t start the internet connection, reporting an error and works ok when connection is established by other program) while weather application from HTC home works ok and establishes connection itself.
The good thing is that battery seems to last longer comparing to futureshocks 6.1 rom I used previously.

karmacoma7 said:
Some more bugs
1. Each time I try to change home screen from the settings ,menu I get "Unable to save settings" error. HTC Home is the only working option. Now I am allowed to change Color scheme but yesterday I was not.
2. There ara also troubles with establishing internet connection from 3d party software like slick or jblend java machine (it doen`t start the internet connection, reporting an error and works ok when connection is established by other program) while weather application from HTC home works ok and establishes connection itself.
The good thing is that battery seems to last longer comparing to futureshocks 6.1 rom I used previously.
Click to expand...
Click to collapse
1.you have the first alpha rom / that problem is fixed for some time
2.i will check
br

I can not access this web site?
Would you like to upload the rom kittchen to another site?
thank you!

bugs status
infrared solved
bluetooth solved
internet is working
camera is working
a new kitchen and rom will follow soon
br

Did you get the Youtube app to work? It only starts correctly in landscape mode, but after a couple of seconds it exits...

Noob Cooker Release: WM6.1 PRO Build 19214

My very first successfully cooked ROM
**WM6.1 CE OS 5.2.19214 (Build 19214.1.0.4)
SYS & XIP from Kaiser Official Rom
Stock-like Rom with stock like functions.
Get it Here: http://jmaverion.net/treo750/WM6.1build19214.rar
Since I desperately needed a WM6.1 with a higher build than the standard 19199 for work, I set out to learn how to cook a higher build rom. After 3 days of work and a bunch of failed roms I did it. This is my very first cooked working rom. Seems pretty stable. Please review and mention any bugs....One bug to mention is that OneNote installs itself into another "Office Mobile" folder creating an extra Office Mobile folder.

Congratulations! Do you think it is possible to build a wm6.5 rom with this kitchen or is it straight wm6.1?
Greetings

Need good recipe for installing new ROM
What post has easiest directions for installing ROM? Flashing phone is needed? but not sure what that entails or requires (sofware?)...

after short test:
- in programs is folder Office mobile multiple
- missing skin for Windows media
- bottom bar sometimes is not changing skin or on click show old skin
+ storage free 53Mb
+ palm messaging etc.
keep work and good luck to next relase
What about WM6.5? Can you cook WM6.5? because Veisen ROM is only beta.

jhnstn00 said:
What post has easiest directions for installing ROM? Flashing phone is needed? but not sure what that entails or requires (sofware?)...
Click to expand...
Click to collapse
Look for the Unlocking and Unbranding post. It has the easiest directions for unlocking you phone and putting on the HardSPL for flashing custom ROMS
as for installing custom roms on a phone already HardSPL'ed just use that flasher I included in the download.
MikyWoW said:
after short test:
- in programs is folder Office mobile multiple
- missing skin for Windows media
- bottom bar sometimes is not changing skin or on click show old skin
+ storage free 53Mb
+ palm messaging etc.
keep work and good luck to next relase
What about WM6.5? Can you cook WM6.5? because Veisen ROM is only beta.
Click to expand...
Click to collapse
Thanks for the feedback. TO add to the list of bugs for this version, I found that with SPB Mobile Shell 3 and HTC Home installed, after making a phone call it seems to have a memory leak.
As for the request of a WM6.5 for the treo, I'll start working on one next week. I have exam finals this weekend.

The link is not valid. Anyone care to post new link?