Hey XDA-members,
I need some help with my nexus one and its driving me crazy that I can not get it to work as a Nexus should.
So here it is:
Android version: 2.2.1
Build Number: FRG83
Carrier: Wind Mobile
APN settings: internet.windmobile.ca
Ok so here is the problem:
1). So I have had this problem for some time and I thought I fixed it but it did not seem to work. I was running CM6 and I was cutting in and out of 3G/H (the symbol goes anyway and no data) . And so the same thing with 2.2.1. I have followed information on what to do and I am not able to fix the problem.
2). I am not able to get into recovery mode. each I hit the power button and the volume down key, enter into the menu select recovery mode I keep getting the Android with '!' and so I can not move to a ROM, wipe the phone nothing. Please help.
Well you need to root and install a custom recovery in order to load a custom rom.
Yes but I cannot get into recovery mode
Then install a custom recovery. If you want to go completely back to stock, follow the un root guide and start over.
I just tried that using the how-to's and so when i click on recovery mode still get the droid with a huge '!' above him.
What's the problem? You're getting to stock recovery. That's normal.
If you want custom ROM installed - root the phone and install custom recovery. You'll get there once you installed it. And you don't need to go to recovery to install the recovery, you do it from the loaded ROM.
Related
Hi Folks,
I had a CyanogenMod-6.1 for Nexus One :: V6.1.0-RC1 (10/28/2010) installed on my Nexus 1.
Prior to that i was using CM6.0 RC1 stable release. Did an upgrade (with full void and nandroid backup) to try out the new features.
However this afternoon, out of nowhere, my volume buttons and trackball started to malfunction.
i.e to say : I cannot adjust volumes in any part of the apps/phone and i can't select/click stuffs with the Trackball.
Hence, I thought of removing CM6.1. Here's the problem started.
#1. I can't boot into recovery. The phone itself will be stuck at the big "X" screen. After 5mins, it will boot into CM6.1
- Using ROM Manager i tried to reflash Clockwork Mod 2.5.1.0 for a couple of times but i still cannot get into Recovery.
Be it powering up with trackball held down, booting into recovery up via Rom Manager. Surprisingly, volume down was working together with power down was able to go into Bootloader
for me to select "Recovery", however, i still can't access Recovery.
#2. I tried using ./fastboot-mac flash recovery updatedclockwork.img also can't.
#3. I tried using Amon-RA. ./fastboot-mac flash recovery Amon-RA.img also to no avail.
#4. i used ./fastboot-mac update to load a StockFRF91 Froyo also can't get into recovery.
As of now, my phone is stuck continuously in bootloop, cannot access Recovery. I've tried almost 30+ fixes on XDA and other Android Forums but i still can't fix it.
Is there anyway, i can wipe everything inclusive of the "Corrupted Recovery" files and restore back my Nexus One?
Thank you all please save my phone! :'(
Dude I feel your pain. I have the exact same problem. I wonder if it is a CM6 issue?
Hello,
I have a nexus one that isn't working anymore. I was trying to install the cyanogenmod, but I guess I didn't do it correctly.
I was following the clockworkmod way from this: h t t p ://wiki.cyanogenmod.com/index.php?title=Nexus_One:_Full_Update_Guide
When flashing the rom something went wrong. After step 6 my phone didnt reboot, it just stayed off. Now it will only give me the nexus sign if i turn on the phone.
I can still acces the recovery menu when holding Power + volume down.
People told that I should go back to the stock rom.
Can anybody please help me?
*don't know if i've posted in the right category
When you get to recovery is it still clockwork or stock? If clockwork then try and flash cm6 again. If not you will have to download a stock rom push it to the sdcard as an update.zip and boot into the boot loader.
Sent from my Galaxy Tab, that makes phone calls
Since you can boot into recovery you have NOT bricked it for sure
As mentioned in the earlier post try to flash the CM ROM again
If you are unable to access the custom recovery (as in, the stock recovery is still in place), you can follow the manual instructions for installing ClockworkMod: http://wiki.cyanogenmod.com/index.php?title=Nexus_One:_Full_Update_Guide#Manual_Method
You can then follow the procedure for flashing the appropriate radio image: http://wiki.cyanogenmod.com/index.p...ll_Update_Guide#ClockworkMod_Recovery_process
And you can even install the ROM without using Rom Manager using this process: http://wiki.cyanogenmod.com/index.p...Update_Guide#Second_Method_.28via_Recovery.29
All of this is, as I'm sure you've noticed, posted on the same page that you linked. Hopefully this information will help you, now that you have been assured that your phone is not bricked.
Thanks for quick replies. I've contacted a guy with a lot of knowledge about these kind of thinks and helped me fixing me phone. I dont know exactly what went down but I will give it a try.
My first mistake was thinking that I rooted my phone (using the one click method). Don't know if thats the right way to do it, but in the end it wasn't rooted and I tought it was.
The guy rooted my phone, did the AmonRa recovery install and installed the Ethernom Rom for me. Great to have my phone back to working and great Rom btw.
Hi
I successfully flashed Froyo onto my stock Captivate yesterday using Odin in download mode - but it was not w/o a a hiccup or two.
I wanted to to try the Paragon ROM but it appears that the only way is flash it is to place it in the SD of the phone and then boot into recovery, then choose reinstall packages.
So, reading I found that I would need to flash back to stock to do this, so that is what I did. Then I copied the files I needed to the phone and rebooted into recovery mode. Thats when the fun started.
No matter what, I could not select anything using the power button and went into the reboot loop for a while. I was very frustrated. Finally, I figured out how to get into Download mode using the adb reboot download trick and successfully flashed back to stock.
So my question is - Is there anyway to flash those new custom ROMs with Odin?
Odd issue, after second stock flsh had problem continued
Hi
I'm trying to flash a custom ROM, to be specific: http://forum.xda-developers.com/showthread.php?t=1524108 , but I have a few problems.
Almost one year ago my Home button stopped responding which made almost all multitasking useless and I had to use d back button in order to get back to my home screen that obviously then exited wtv app I was using. Two days ago I managed to spill some water on my phone while I was listening to music through its speaker and 10 min later the phone suddenly shut off. The phone went into a bootloop and whenever I removed the battery and put it back in, the phone automatically booted back into the bootloop, as if the power button was constantly being pressed. Considering that my Home button doesn't work and now also my Power button, I couldn't enter recovery and when I entered Download Mode via my USB JIG the phone went in and out of Download Mode every 5 sec or so which made it impossible for me to flash back to stock with Odin and then flash CWM etc etc...
I decided to open my phone and cut over the Power button cable since I assumed it was already dead (I let the phone dry for 24 hours without any help before I did) and then when I put back the battery the phone didn't boot by itself. I plugged in the USB JIG and Download Mode is now working again. I have flashed a 2.3.4 stock ROM (JVP) and I'm using a CF-Root kernel with CWM 3.
I installed ROM Manager (Superuser came with the kernel) and I have checked that the phone is rooted, but whenever I try to flash a ROM through ROM Manager the phone doesn't boot into CWM and then tries to flash the ROM, it boots into Recovery e3.
I know I have CWM installed considering I've tried this without flashing CWM with ROM Manager, and with CWM from ROM Manager.
The ROM won't be flashed due to an error stating that the Signature isn't verified.
Is there any way for me to be able to flash the ROM with another method or to get the ROM Manager to work properly? I know my phone is in a pretty bad state considering I don't have a working Home button or Power button, but it works fine with stock ROM where I use an app that makes it possible for me to unlock my screen with my volume buttons.
Basically, my question is... how can I flash custom ROMs without a home/power button, and why isn't ROM Manager working?
Thanks in Advance
PS. I have to flash a kernel through Odin everytime I want to boot my phone, is there anyway to boot the phone without having to flash over and over again?
I'm unclear as to whether you can enter download mode and flash through odin.
If not, perhaps you could try mobile ODIN off the play store and see if that works.
The reason why i'm saying so as if you can enter download mode i'd flash this (darky's rom) rom.
It's rooted, has CWM installed and is just a one step odin process to a nice stable rom.
Perhaps you could try 'rom toolbox' to enter recovery and download, get it from the app store.
And as you're phone is pretty broken, i assume you probably wanna flash one rom and stick with it. So either flash the rom i just linked you to or this (gamerzrom ninja) one.
Gamerzrom ninja however requires you to flash stock JVU in odin, then semaphore 2.5.0 kernel in odin, then enter CWM and wipe data, cache, dalvik cache and then flash the gamerzrom zip file.
That is quite a few steps and with you're phone so broken it may be easier to just do the first one which is one ODIN process, however the latter rom i suggested is more optimized and has more power overall, ram, etc etc.
Your call
Thanks for your reply.
The DarkyROM might come in handy considering it's flash-able through ODIN. The other ROM really isn't much of an option for me as I cannot do anything in CWM other than navigate up and down due to the fact that my Home/Power buttons don't work.
I'm able to get into CWM without much of a problem, but I just get stuck there...
The reason I want the ROM I linked to is because it has built in on-screen buttons, which then will make it possible for me to finally have my Home button back.
Is there no way to flash a ROM without the use of CWM? or without actually entering CWM and doing so manually?
[SOLVED -- Read my last post]
Posting on forum was my last resource, but I've tried literately almost everything I can possible find.
I already bricked my phone and had to unbrick, do everything (update firmware etc) all over again.
I am at a point where I am afraid to do something new to my phone now without knowing what they are...
Please bare with me, I am not familiar with exactly what flashing is or whatnot, I just followed the instructions and got where I am....
K, recently I decided to wipe my phone CLEAN and update to new CyanogenMod 9 from factory mode.
So, I have Captivate, I897. It was ECLARE with 2.1 firmware.
I have updated to 2.3.5 (Gingerbread [I897UCKJ2]), Rooted.
I had to Flash BACK to KK4_stock_kernel.tar for me to use WIFI again because I had issue after Rooting my phone, I couldnt access the WIFI.
I installed Clockwork mod (Free version).
My goal is to install CyanogenMod 9, and part of the process requires me to enter the CMW Recovery Mod.
I dont even know what this looks like, but all I know is whenever I boot my phone, after the AT&T logo animation it seems to go into this "messed up" screen, where as if my phone is broken. Stays there for 3 seconds and then continues to boot back to its OS.
In ROM manager, it says Flash ClockworkMod Recovery (You must have the clockworkmod recovery installed to flash and restore ROMs!)
Another option within ROM manager is, Reboot into Recovery (Boot into Recovery mode for manual management.), which if I do access it, it takes me back to that AT&T logo animation and that "messed up" screen again, but this time it stays there. Where all kinds of colored pixels are on my screen as if my screen is broken. It will only continue to boot back to my OS if I press power button or some sort.
Im guessing that's my Recovery Mod, which my phone for some reason cannot see?
So I tried "Download ROM (Upgrade to ROM Manager (premium) to access the full list of ROMs!", hoping this may cure that messed up screen effect, which I think is the Recovery Mod for all I know... When I click to install, it gives me Confirm Phone Models. None are my phone model for me to install.. (It only gives me Google Nexus S / Google Nexus S 4G / Samsung Epic4G / Samsung GalaxyS i9000).
Earlier, I was looking at this, http://forum.xda-developers.com/showthread.php?t=1127578
which is a way to fix recovery mod(?) But I have NO idea how to even install those files... Maybe not the .tar file but the other one.
Please help? Am I the only one experiencing this kind of problem? Couldnt find anywhere else on youtube / google / forum..
Thank you VERY much in advance, really appreciate it..
-Dan.
danroh said:
I had to Flash BACK to KK4_stock_kernel.tar for me to use WIFI again because I had issue after Rooting my phone, I couldnt access the WIFI.
-Dan.
Click to expand...
Click to collapse
This is your likely problem right here. The Kernel that is installed during the rooting process and typically when you install custom roms is what is responsible for installing and therefor you being able to access the CWM recovery. Flashing back to the stock kernel likely messed things up for you.
http://forum.xda-developers.com/showthread.php?t=1300843
Now if you follow that link it will take you to several one click options for flashing your phone to stock gingerbread but with a kernel containing CWM. Also keep in mind that it is possible you could have wifi issues if you've had them in the past, but if your goal is to get to CM9 just ignore the wifi for the time it shouldn't be an isuse in the end.
Hey OP,
See this.... TRusselo's Flashing Guide
Sent from my SAMSUNG-SGH-I897 using xda premium
You need Gingerbread bootloaders.
Thanks guys! I figured out the problem and solved it!
Like you guys said, I didnt have the bootloader. The gingerbread I installed was the no bootloader version. After reinstalling to the one with bootloader, I was able to access the recovery mod and that "rainbow screen" glitch was no more.
Thank you!