Database Develop

from hard spl to stock rom

i have a tmobile wing and have a hard spl on it how do i go stock again??????

unpapi_4u said:
i have a tmobile wing and have a hard spl on it how do i go stock again??????
Click to expand...
Click to collapse
Back to the stock SPL? The only thing I can think off and it MAY NOT WORK OR BRICK YOUR DEVICE because I haven't tested it is using USPL to flash the stock RUU and hopefully that will overwrite the SPL.

From my understanding, the stock Tmo Wing RUU does have SPL and will over write it back to stock.

duprade said:
From my understanding, the stock Tmo Wing RUU does have SPL and will over write it back to stock.
Click to expand...
Click to collapse
Except that the HardSPL is coded not to let another SPL overwrite it. Using USPL should overwrite this lock.

duprade said:
From my understanding, the stock Tmo Wing RUU does have SPL and will over write it back to stock.
Click to expand...
Click to collapse
can't you strip the rom of the spl like on the wizard roms?

systematic said:
can't you strip the rom of the spl like on the wizard roms?
Click to expand...
Click to collapse
Yes. That will let you use any ROM, but if he wanted to go back to the stock SPL for warranty reasons, that would be the way to go, I would hope.

any one have USPL?

unpapi_4u said:
any one have USPL?
Click to expand...
Click to collapse
go to the open touch thread, you can find it in the first post there.

its not there.......anyone have a direct link?

unpapi_4u said:
its not there.......anyone have a direct link?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=351966

i tried installing it but in step three the ruu dose work period.......any other way...or shuold i give up?

unpapi_4u said:
i tried installing it but in step three the ruu dose work period.......any other way...or shuold i give up?
Click to expand...
Click to collapse
I'm sorry. Please restate your post. I didn't quite understand it.

i found a eaiser way and u dont need a uspl all u need to do is get the stock ruu and run it. your phone is going to restart...simply put it back into bootloader mode without taking off the usb and your done!!!!!

unpapi_4u said:
i found a eaiser way and u dont need a uspl all u need to do is get the stock ruu and run it. your phone is going to restart...simply put it back into bootloader mode without taking off the usb and your done!!!!!
Click to expand...
Click to collapse
This will not overwrite HardSPL.

hey it just worked for me maybe some poeple should test it out 2

unpapi_4u said:
hey it just worked for me maybe some poeple should test it out 2
Click to expand...
Click to collapse
I don't understand. You HAD the HARDSpl installed in your phone? You ran the stock RUU and it automatically wrote the HardSPL even though the HardSPL was purposely coded not to allow that?

SO you say when installing a official RUU WITH SPL.nbh - the HArd-SPL will be overwritten??
Please clarify your devicesttings.

i tried it again and i missed a step (my bad)
here are the steps that worked for me......
step 1 :run the uspl (in the botton link of these steps) but in step 3 of the uspl program the ruu isnt going to work..
step 2 : put ur phone in bootloader run the stock ruu and at 1% the phone is going to restart and get out of bootloader..
step 3:simply put it back into bootloader (without disconnecting it to your computer) and let the stock ruu run...after go thru the steps...the align the screen put a pasword ect.. let it update the windows (if u dont want it to update then just soft reset the phone before it starts) and then your done.
http://forum.xda-developers.com/showthread.php?t=351966

just thot i'd co-sign for unpapi_4u
verified: wing can go from hard-spl to stock spl via uspl
1. download uspl aka flash center and wing factory ruu
2. copy RUU_signed.nbh and SPL.nbh from wing factory ruu to flash center
3. run it
completed successfuly with no intervention, didnt have to put in boot loader
after flashing i checked (soft reset while holding camera button)
spl was 4.10.0000

Bootloader--Stuck
Hi,
After trying the above, I now get the bootloader screen... showing IPL 4.17.0001 and SPL 4.10.0000.. Try flashing it with
Stock--RUU_Herald_DOPODASIA_WWE_1.7.707.3_02.69.90_Ship_R.exe [Error 226 Flash Write] &
HTC_P4350_WWE_4.17.405.2_4.1.13.44_02.94.90_Ship.exe [Invalid Vendor ID] & RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe [Invalid Vendor ID].
I also tried alot of the cooked rom v4.0/V4.4/OpenTouch 2.4/
HERALD.ASERG.23F.WM6.RUS.PS6.rar but also get error message as file corrupt [#270]
I had the hardSPL installed before this..Trying to got back to stock rom because I am selling the phone. Do you guys have any suggestion?
Which ROM can I use to make it work.
My phone is the Dopod C800
Thanks in advance..
Eddie

ATT Htc Fuze

I unlock my htc fuze to a newer version, but I have to send my phone back in so that I can get another one. I want to know what do I have to do so that the phone can be and ATT version so that I will not be charge for unlocking my phone and how?

use the search function

"UPDATE: STEP BY STEP HOW TO RETURN TO STOCK SPL - FOR WARRANTY REASONS ONLY!
0. be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!
1. download the stock spl package from this post.
2. also download the original hardspl from the attachments in this post.
3. run the hardspl exe but do not click anything in RUU yet. just let the hardspl EXE extract the files for flashing.
4. the SPL you want to revert to is a .NBH file, put the NBH in the extracted hardspl package, overwriting the original NBH file in it!
5. continue with the RUU (or if needed, run SSPL-Manual.exe manually, then run RUU when it goes to black screen), it goes to 100%, reboots, done.
+6. to verify, volume down + reset, see version number on tricolour screen, should now just say 1.90.0000.
that's it."
From: http://forum.xda-developers.com/showthread.php?t=410150

SPL just says "Loading..."

I'm trying to flash my unlocked Rhodium from MicroSD. It gets through the tricolor screen, to the white screen that says "Loading..." and just stays there.
The SPL version says SPL-0.79.0000
Do I have to upgrade the SPL for this to work?

hi,
have you installed hardspl to your device?
are you trying to flash stock/shipped rom or custom roms?
read these threads first:
1. hardspl
2. flash your first rom

Mine came unlocked, so yes, it has HardSPL.

dementio said:
Mine came unlocked, so yes, it has HardSPL.
Click to expand...
Click to collapse
Do you mean Sim-unlocked?
That's not Hspl.
If your TP2 has Hspl it should look like in the attached picture.
You get to the tricolor screen by shutting the phone off (hold powerbutton until promted on screen and choose shutdown) and then press and hold the volumedown button and press the powerbutton. Release both buttons when you see the tricolor screen.
If not.... Then you have to install HSPL first and then flash stock/Custom ROM.

Yes, it's hard unlocked.
Without trying to sound pissy/cocky, I've done this quite a few times with my old Kaiser, but I had it totally unlock it myself, this one came that way.

Are you using the new USB cable it came with? I had that problem and realized my old regular USB cable was not fully compatible with the TP2. Activesync worked fine with it but it won't flash for some strange reason. Then tried with newer style USB cable with no problems. opps, nevermind. sd flashing, huh... my works fine. I guess make sure its fat32 and no corrupted zip. thats all i can think of. I'm sure you already tried that though.

make sure the nbh file is RHODIMG.nbh If that fails, the zip archive is corrupted or you're still locked.

The file could be corrupted and I never actually thought of that since I haven't run into it before. I'll have to try again with a new file tomorrow.

I think you are confused as to the difference between "unlocked and Hard Spl'ed, these are two completely different things! if your phone came unlocked then that means it was SIM unlocked or not locked to a specific carrier! Hard Spl is not "unlocked" it is a passive form of Spl that allows us to flash non OEM ROM's to our devices! Go into the bootloader and look to see if your SPL version is 0.85 Olinex just to humor me! The fact your very first post in this thread says you Spl is 0.79.000 means you are in fact not Hard Spl and will need to flash Hard Spl to get any custom ROMs on your phone!

If you phone came with Hard SPL you must have bought it from someone who already put Hard SPL on your phone. No body ships phones with Hard SPL!
Check in the bootloader for the version amd if it doesn't save OliNex, you need to re-flash Hard SPL ask per the instructions.
Thread closed - please discuss ROM flashing problems in mskip's thread or Hard SPL problems in the Hard SPL thread.
Dave

Flashing Back to Stock ROM

can anyone give me a step by step on how to flash my ROM back to STOCK?

if you want it for warranty reasons then you will need to flash the SPL also to stock. you can just download the latest ROM from HTC website and flash it. it will give you the stock ROM on the existing SPL.

End of the post http://forum.xda-developers.com/showpost.php?p=2710548&postcount=1.
Remember you will also need to go back to stock spl if for warranty purposes.

i have another problem, when in bootloader it wont change from serial to usb but was a week ago

7896zx said:
i have another problem, when in bootloader it wont change from serial to usb but was a week ago
Click to expand...
Click to collapse
nevermind what i said there, for sum reason it works again now

I've kinda got thesame question. I flashed a stock rom (latest EU rom from HTC site), then stock SPL (1.14) and then the stock rom again. Is this enough to be able to claim warranty without HTC finding out about custom roms/boatloaders?
Thanks

accountabc said:
I've kinda got thesame question. I flashed a stock rom (latest EU rom from HTC site), then stock SPL (1.14) and then the stock rom again. Is this enough to be able to claim warranty without HTC finding out about custom roms/boatloaders?
Thanks
Click to expand...
Click to collapse
That depends. What was your original rom and spl? Are you entitled (via location) to use the new EU rom, eg if you live in America then this may not be acceptable to HTC.
When you boot up the new rom, are the screen colours ok as this will tell you if you have the right spl for your rom? If you have the latest EU rom, I doubt that 1.14 spl would be the right one, but it could be I guess. With the stock rom, you should also get the stock radio. So provided you have the stock rom available to your area, with the correct matching spl and the radio, there is no way to tell of your exploits

Thanks for your reply
The problem is that the screen of my device won't turn on anymore (Device powers on, I can connect with activesync, digitizer works fine) so i have no way of checking if I have the right SPL or not...
I also have no idea what my stock rom/spl/radio version was.. I live in the Netherlands, and through the official HTC site i flashed the latest rom, which included a radio (a radio version was part of the filename). What I'm trying to find out is:
Could 1.14 have been my stock SPL, or was that version never used on any Dutch Blackstone?
If the spl doesn't match the rom (wrong colours) that isn't much of a problem; I can tell them I tried to update my rom because I thought maybe my screen would work again after I installed the latest ROM... But if I have a SPL that was never even used I don't think they will buy that

According to the wiki there are 2 Dutch roms - one would require a 1.14.0000 spl and the other a 1.54.0000 spl. So I guess either of those would do.
When you flashed the rom from the website, where you still using hspl or uspl? Depending on the rom you flashed you will need to flash the matching spl. Do you have the full notation/naming of the rom you flashed. This should give an indication of which spl you will need.

As much as I appreciate ClydeB1 for assisting you, I fail to see a reason for this thread. A thread already exists for flashing advice, i.e. the dummies guide. Also the HardSPL thread exists and has advice on how to flash back to stock. So depending on your query post in either of these.
The initial query and reason this thread was created has been answered, so no need for this thread to remain open. Thread closed

Downgrade SPL and to Stock to return to Orange

Hi, I'm due to return my Touch HD back to Orange for a swap for a replacement handset, but I would like to make sure I return it back with the original Stock ROM and SPL.
If I switch on my phone with the vol key pressed, it shows that I have:
SPL-1.56.OliNex
And I am currently using the latest MaryOne ROM.
I have downloaded: RUU_BlackStone_Orange_UK_1.14.405.3_Radio_52.49a.25.26_1.09.25.14_Ship which I believe was the original Stock ROM for my phone. It appears that this ROM is the older 1.14 version.
Before flashing my device with this ROM, do I need to downgrade my SPL first? Or is there a way to make the phone use the Stock SPL? (The reason I ask this is because I remember reading the "dummies guide" and it said that in order to use the newer 1.56+ ROM's I had to upgrade the SPL, so my guess is I may need to downgrade now to install a 1.14 ROM?)
Could anyone clarify for me?
Thanks,
WizzKidd

wizzkidd said:
Hi, I'm due to return my Touch HD back to Orange for a swap for a replacement handset, but I would like to make sure I return it back with the original Stock ROM and SPL.
If I switch on my phone with the vol key pressed, it shows that I have:
SPL-1.56.OliNex
And I am currently using the latest MaryOne ROM.
I have downloaded: RUU_BlackStone_Orange_UK_1.14.405.3_Radio_52.49a.25.26_1.09.25.14_Ship which I believe was the original Stock ROM for my phone. It appears that this ROM is the older 1.14 version.
Before flashing my device with this ROM, do I need to downgrade my SPL first? Or is there a way to make the phone use the Stock SPL? (The reason I ask this is because I remember reading the "dummies guide" and it said that in order to use the newer 1.56+ ROM's I had to upgrade the SPL, so my guess is I may need to downgrade now to install a 1.14 ROM?)
Could anyone clarify for me?
Thanks,
WizzKidd
Click to expand...
Click to collapse
You are correct, if you are using a rom based on 1.14 you need to match the SPL or you'll get screen issues etc. You can either use HSPL 1.14 or return stock 1.14 SPL. All info can be found in this thread including how to return to stock rom & SPL (bottom of first post - section called 'How to reflash Stock/Shipped SPL - STEP BY STEP - FOR WARRANTY REASONS ONLY!')
Post further queries in that thread
Thread closed