I didn't notice this problem until the day before. My battery status is displaying 70% when the phone consider it to be fully charged.
I've drain it to 5% before charging overnight, but the status still display 70%.
I am not sure if this is a problem with my phone or the battery. Any help would be nice.
Try this but you need a rooted phone for it: http://forum.xda-developers.com/showthread.php?t=722862
it is just a status bar bug
the battery is probably fine
use Gauge Battery Widget instead to see the real stuff
http://forum.xda-developers.com/showpost.php?p=8124361&postcount=46
Thank you for the link!! I am trying that now.
This is not the status bar problem as I've test out some of the widget.
The phone would only charge up to 70% no matter how long it will remain on the charge.
Going into the battery info in setting also indicated it is at 70%.
At this moment I am draining my phone with max brightness and everything turn on.
Start off at 70% at 9:30am and now (2:00pm) is at 3%
So I guess I should try to charge it full with the phone off
Did you recently flash firmware to your phone? Make sure your battery is fully charged whenever you flash firmware because it will clear the battery data. It seems to me all you need is a battery calibration. There is a procedure posted somewhere. IIRC, you need charg up the battery to 100%, power down, charge 100%, power up again and repeat a few times.
I had the same problem.
After a day of charging the battery fully charged notification appears. As soon as I unplug it the battery immediatly jumps to 70%.
Is there a way to fix this? Perhaps reflashing when the phone is fully charged (which is currently 70%).
I tried the rm /system/data/batterystats.bin but did not remedy this problem.
Same problem here. It has been this way for a month. Tried calibration, different batteries, different ROMS....everything.
who can help?
using alternative battery widget is not an option if battery stats from settings also displays 70% max
this is very unusual problem - i would suggest:
1) install https://market.android.com/details?id=com.nema.batterycalibration (phone needs root)
2) drain battery to 0%
3) take out battery for 5-7 minutes
4) put it back and turn on and drain again
5) repeat untill phone will not turn on
6) while still off charge phone to 100%
7) disconnect charger power on the phone, let it boot and use the battery calibration app
8) now let the phone discharge with normal usage untill it powers off (do not reboot, power off during discharge)
9) put the phone to charger, turn it on and let it charge to 100% wo reboots/poweroffs
should be fine
let me try tomorrow..I have similar issue..
Sent from my GT-I9000 using XDA App
Today, over night charge from 70% to 79%
have you followed my tutorial from this post -> LINK
also can you dial *#*#4636#*#* pick battery information and make a screenshot, then another after a minute or two ...
I made this thread over in the captivate forums, it explains the issues in detail
http://forum.xda-developers.com/showthread.php?t=1279925
What rom/kernal are you guys using?...
Sent from my MB860 using xda premium
concentrate on points 2 to 5 of my 'tutorial' and for god sake use only original charger
and yes, what kernel
Hey Somator, I am trying your tutorial now. I drained my battery to 0% on my phone. I then would boot it up, it would register 1%, then turn off.
I then put my battery in a coworkers phone today and it read 40% when it previously read 0% on mine. So I depleted the battery on his phone, reinserted it into mine, and I am now currently charging it to 100% while it is off. I will let you know how the rest turns out.
I have tried calibration procedures on stock rom, MIUI, CM7, I9000, and I897 Roms.
drain the battery on his if you can and then charge on yours
after that wipe battery stats with https://market.android.com/details?id=com.nema.batterycalibration
//edit: oh you did exact that - well should be fine from now - still wierd why it just 'decalibrated' by so much in the first place
the original charge has helped me, everything is fine
In case someone is looking for an answer here (considering this is the thread that comes at the top of Google's search results), this is what worked for me:
1. Take the battery out.
2. Plug phone into wall charger.
3. Put the battery back in the phone.
4. Let it charge for an hour. Mine said 5% the entire time it was plugged.
5. Remove phone from charge. Remove battery. Put them all together again.
I hope this works for others.
Verizon note 4
$omator said:
using alternative battery widget is not an option if battery stats from settings also displays 70% max
this is very unusual problem - i would suggest:
1) install https://market.android.com/details?id=com.nema.batterycalibration (phone needs root)
2) drain battery to 0%
3) take out battery for 5-7 minutes
4) put it back and turn on and drain again
5) repeat untill phone will not turn on
6) while still off charge phone to 100%
7) disconnect charger power on the phone, let it boot and use the battery calibration app
8) now let the phone discharge with normal usage untill it powers off (do not reboot, power off during discharge)
9) put the phone to charger, turn it on and let it charge to 100% wo reboots/poweroffs
should be fine
Click to expand...
Click to collapse
I have Verizon note 4 that can not be rooted, any other options?
Related
I just got my captivate and it is clean except from root and sideload and have lead to my first issue. I put my phone on charge over night and went to bed. Then after I woke up I unlocked the phone and saw the phone fully charged sign. I then checked my battery percentage which indicated 100, but when I pulled the charger out it shows 59! I rebooted but it still shows it and I pretty much am sure that it is really 59 and not a miss reading. But why did not fully charge? IS there a setting that I did wrong because my hunch is that when the fully charged sign comes, it stops charging (the zigzag on battery goes of) and the battery drains and the phone never charges again. This is really retarded implementation! Does anyone else have the same problem or any solutions?
Sent from my SAMSUNG-SGH-I897 using XDA App
EDIT: PLEASE DON'T POST ANY RECALIBRATION THREADS IT IS NOT AN ISSUE ABOUT CALIBRATION (HENCE I HAVE DIFFERENT ISSUE ON THREAD TITLE) THE ISSUE IS FURTHER EXPLAINED THREE POSTS BELOW.
Have you tried any of these methods?
HOW TO: Reconfigure Battery Stats
When you flash a new ROM it may be necessary to reconfigure your battery stats.
Signs you may need to re configure:
1. . Using more then 10% battery in an hour or less
2. . While plugged into the charger you lock screen shows a different percentage charge then the battery icon
3. . After a full charge your battery icon only shows 99% and quickly drains.
4. . Any general weird battery activity
Step by step battery reconfigure process: (This is the process that has worked for me time and time again with ROM after ROM)
1. . Flash the Rom on a full battery. (skip to step 6)
2. . If you flashed on less then full plug into AC charger asap and charge to full while the phone is powered on
3. . Once the phone blinks full 2.1-battfull popup shows 2.2-battery sign shows on left of notification bar power off
4. . Charge till full while powered off. the phone will vibrate and the green battery will show 100% in white text
5. . Unplug phone and power on.
6. . Using Root Explorer or a comparable program navigate to (Mount R/W first): data>system> and delete file batterystats.bin
7. . Reboot
8. . While the phone reboots it will rebuild that file and the software and phone should now match.
9. . If any of the symptoms persist start at step 2 and repeat.
10. . As with any rechargeable battery fully discharging the battery once in a while isn't a bad idea
HOW TO: BATTERY Calibrate
1. Connect the phone to the charger with the phone powered on, and allow the phone to charge until it shows 100%
2. Disconnect the phone from the charger, and power it off.
3. Reconnect the phone to the charger with the phone powered off, and allow the phone to charge until the battery indicator shows 100% (you can use vol-up/vol-down to make the indicator come back up when the screen goes to sleep).
4. Disconnect the phone from the charger and power it on.
5. Once the phone is powered completely on, power it off again and reconnect it to the charger until the battery indicator shows 100%.
6. Disconnect the phone, power it on, and use it.
You should only need to use this sequence one time.
dfuse06 said:
Have you tried any of these methods?
HOW TO: Reconfigure Battery Stats
When you flash a new ROM it may be necessary to reconfigure your battery stats.
Signs you may need to re configure:
1. . Using more then 10% battery in an hour or less
2. . While plugged into the charger you lock screen shows a different percentage charge then the battery icon
3. . After a full charge your battery icon only shows 99% and quickly drains.
4. . Any general weird battery activity
Step by step battery reconfigure process: (This is the process that has worked for me time and time again with ROM after ROM)
1. . Flash the Rom on a full battery. (skip to step 6)
2. . If you flashed on less then full plug into AC charger asap and charge to full while the phone is powered on
3. . Once the phone blinks full 2.1-battfull popup shows 2.2-battery sign shows on left of notification bar power off
4. . Charge till full while powered off. the phone will vibrate and the green battery will show 100% in white text
5. . Unplug phone and power on.
6. . Using Root Explorer or a comparable program navigate to (Mount R/W first): data>system> and delete file batterystats.bin
7. . Reboot
8. . While the phone reboots it will rebuild that file and the software and phone should now match.
9. . If any of the symptoms persist start at step 2 and repeat.
10. . As with any rechargeable battery fully discharging the battery once in a while isn't a bad idea
HOW TO: BATTERY Calibrate
1. Connect the phone to the charger with the phone powered on, and allow the phone to charge until it shows 100%
2. Disconnect the phone from the charger, and power it off.
3. Reconnect the phone to the charger with the phone powered off, and allow the phone to charge until the battery indicator shows 100% (you can use vol-up/vol-down to make the indicator come back up when the screen goes to sleep).
4. Disconnect the phone from the charger and power it on.
5. Once the phone is powered completely on, power it off again and reconnect it to the charger until the battery indicator shows 100%.
6. Disconnect the phone, power it on, and use it.
You should only need to use this sequence one time.
Click to expand...
Click to collapse
Ill try that but the thing is that I didny flash any roms so i don't know if it is a calibraion problem. Also can anyone confirm that the battery stops charging once full while connected into charger?
Sent from my SAMSUNG-SGH-I897 using XDA App
http://forum.xda-developers.com/showthread.php?t=765656
PROBLEM
EDIT: I did some more searching and found that some people said they have this problem and some people don't?!? Pretty much what happens is that when it hits 100% it stops charging so then it drains over night without charging again. This is STUPID! But just to make sure this is a stock problem I want to test if this happens to people here. Can you please post if this happens to you or not? (also post if your on a custom rom)
joeshmoe08 said:
EDIT: I did some more searching and found that some people said they have this problem and some people don't?!? Pretty much what happens is that when it hits 100% it stops charging so then it drains over night without charging again. This is STUPID! But just to make sure this is a stock problem I want to test if this happens to people here. Can you please post if this happens to you or not? (also post if your on a custom rom)
Click to expand...
Click to collapse
It's never happenned to me stock or custom ROMS, it really looks like you need to callibrate your battery. I've experienced a similar issue as you and a simple callibration fixed it. I've never had it stop charging when plugged in after a full charge.
Rhiannon224 said:
It's never happenned to me stock or custom ROMS, it really looks like you need to callibrate your battery. I've experienced a similar issue as you and a simple callibration fixed it. I've never had it stop charging when plugged in after a full charge.
Click to expand...
Click to collapse
Really??? Ok I will try recalibrating, but I don't know how my calibration got messed up since I really didn't flash any roms.
I think ( dont know for sure) this happens when you first get the phone and do not charge it fully before first power on. I think android stores this half chrged battery as full and starts the cycle from their so it never actually charges.
i would use rom manager delete battery status pull battery for 5 min then put battery in and charge from the wall till it sais full and repeat this over once
Sent from my SAMSUNG-SGH-I897 using Tapatalk
bwill87 said:
I think ( dont know for sure) this happens when you first get the phone and do not charge it fully before first power on. I think android stores this half chrged battery as full and starts the cycle from their so it never actually charges.
i would use rom manager delete battery status pull battery for 5 min then put battery in and charge from the wall till it sais full and repeat this over once
Sent from my SAMSUNG-SGH-I897 using Tapatalk
Click to expand...
Click to collapse
Ya thats actually a likely explanation. Recalibrating now. Almost to the point to remove battery stats.
Hey,
I just installed CyanogenMod 7 on my milestone using openrecovery. Everything was working perfectly, but the battery was draining like there's no tomorrow.
Started at 50% when I first booted, I downloaded a couple of apps from the Market, and went down to 20% (in the space of about 10 minutes). So I plugged in the phone charger (USB into back of my computer), and then while configuring settings, battery went to 4% (it was checking in 1% increments, which I have since found out that drains the battery). The phone then died. So, the phone was using WAAAAAY more power than the USB port could supply. Anyway, thought I'd let it charge for a while, then go back into the settings, and remove the 1% increments, to try and get normal battery life.
The phone recharges, and automatically reboots. Its still on 4%, but I went in, turned off the 1% increments. Phone dies again.
Charges about 10 minutes, reboots itself again. During this period, I did some research, and found that the battery draining can be caused by excessive CPU usage, resulting in the screen staying on even when it's off (?).
But, alas, no luck. I don't have enough battery to flash the stock SBF.
All I really want is:
a) a way to just have the thing charge without turning itself on, and
b) a workaround to get at least half-decent battery on CM.
Thanks,
David.
[Disclaimer: not guaranteed to work, I don't take responsibility for anything you do your phone!]
Try deleting your /data/system/batterystats.bin before trying this procedure out. You can use an app like Root Explorer to do this. If you're unable to, proceed with bump charging.
Try bump charging:
1. Remove battery, put it back in after a good 2-3 minutes and connect phone to a wall charger. Make sure the phone is still switched off while it's charging.
2. After it finishes charging completely (green LED), let the charger be switched on and connected - remove the battery alone (without switching off charging).
3. After a few seconds, you will see a "?" on your screen, after which you insert the battery back in (while charger is still switched on).
4. Wait till charging completes again (green LED).
5. Plug out charger, wait for 2-3 minutes and plug charger back in and start charging again. It should now be fully charged.
6. Turn phone on while charging, after booting into CM, try OC'ing it to 800MHz interactive governor, apply settings on boot and restart your phone.
Hope this fixes your problem. Good luck!
Anyone can feel free to correct me if I'm wrong.
rampee said:
[Disclaimer: not guaranteed to work, I don't take responsibility for anything you do your phone!]
Try deleting your /data/system/batterystats.bin before trying this procedure out. You can use an app like Root Explorer to do this. If you're unable to, proceed with bump charging.
...
Click to expand...
Click to collapse
I had the same problem some time ago and tried all this to no avail. I even changed to froyomod for some time, but CM7 is far superior so I just came back to it. The problem happened again this morning just after using google maps. I then rebooted and uninstalled all google maps updates. Seems to be working o far.
hey, yeah, just one problem with that - i can't boot into android for longer than about 3 seconds, and now there is no way to revert, as the bootloader says Battery Low.
Can't you boot into recovery, flash another rom and then reboot into android?
Don't charge from usb, use wall charger. That way, the system will boot only to charge-only screen, android system itself not running.
Hey, kabaldan, I found that out.
Charged 100% using the bump method instructed above. Battery life is still worse than useless, 50% in about a half hour.
will performing those other steps help?
Can you try another fully charged Milestone/Droid battery?
If that doesn't work it might be a problem with your phone's hardware. I know it might be a long shot, try cleaning your phone's and your battery's leads (connectors) if they might've accumulated rust/dust or something. Not sure.
Don't know if this is a similar problem but mine goes down in % pretty fast too but then it can stay for 1% for half a day
No, mine definitely dies. At around 5%, although I did turn off the 1% increments, because I heard they guzzled battery.
The battery life is getting progressively better, but as soon as I use 3G, or open any half-decent games, it drops to about 40% in ~.00001 seconds.
Although, to be fair, I didn't get great battery life on stock rom, either. And my ram always seem chokkas. Like usually only have about 50mb, and I'm not running anything too hectic.
Unfortunately, I think I'll get the Samsung Epic as soon as they bring out the GSM version. I just want an android phone with an unlocked bootloader, insanely large screen, and hardware keyboard, not to mention ~20 days battery life. Is that too much to ask?
Hey all,
Noob question. I recently went to JVP (doc kitchen) and tried out multiple kernels (speedmod, fugu, tegrak). I only noticed this issue after going to tegrak's kernel so suspect it's kernel related.
The issue I'm having/suspect is that after "100% charge" the battery would start to be consumed (even if it is plugged in). This is most noticeable if I'm at my desk at work all day (phone on charge) or when I leave my phone charging overnight. When I disconnect to go home/go to work, I can see the battery is at 85% or similar (as if the phone wasn't on charge). If I was to disconnect it as soon as it hit "100%" it'll be at 96/97/98% as expected.
I'm not an expert and logcat confuses the heck out of me to be honest, but would anyone know what strings I can search for to determine if the phone "stops charging" when it hits 100%? I'd prefer it to be on a trickle charge (ie keep the battery at 96/97/98%) so that when I disconnect, I have a near full battery.
Is this a kernel issue? or a battery level calibration issue?
TIA
cheddarchi said:
Hey all,
Noob question. I recently went to JVP (doc kitchen) and tried out multiple kernels (speedmod, fugu, tegrak). I only noticed this issue after going to tegrak's kernel so suspect it's kernel related.
The issue I'm having/suspect is that after "100% charge" the battery would start to be consumed (even if it is plugged in). This is most noticeable if I'm at my desk at work all day (phone on charge) or when I leave my phone charging overnight. When I disconnect to go home/go to work, I can see the battery is at 85% or similar (as if the phone wasn't on charge). If I was to disconnect it as soon as it hit "100%" it'll be at 96/97/98% as expected.
I'm not an expert and logcat confuses the heck out of me to be honest, but would anyone know what strings I can search for to determine if the phone "stops charging" when it hits 100%? I'd prefer it to be on a trickle charge (ie keep the battery at 96/97/98%) so that when I disconnect, I have a near full battery.
Is this a kernel issue? or a battery level calibration issue?
TIA
Click to expand...
Click to collapse
Please do this procedure and see... once u finish ur 2 or 3 cycle u'll get the result...
- Charge your battery full, bump charge to get the highest level possible ; note that it's not a big deal if it shows 97% when you unplug after bump-charging
- Drain your battery to 0% until it shuts down by itself (without plugging the charger or connecting the phone to a pc)
- Wait 2 minutes and reboot the phone to ensure the battery is completely flat (it might reboot fully, half way, not at all, don't worry) until it dies again
- Remove the battery and wait 2 minutes
- Replace the battery and plug the charger without switching the phone on until it shows 100%
- When phone shows 100%, boot in recovery (volume up + home + power) and go to > Advanced > Wipe Battery Stats > Confirm (move up/down using the volume keys)
- Reboot the phone and unplug the charger when the "battery full notification" comes (wait for the notification before you unplug the charger)
- Now use your phone until the battery is flat again and charge full (no need to have it turned off, unless you it to charge faster). Repeat 2 or 3 times and your battery will be calibrated
- Only wipe battery stats once, run a few cycles of full charge / discharge and after that just use your phone as normal (i.e. no need to deplete / charge fully anymore).
When I charge my phone and it says the battery is full and 100%, but after I unplug the charger, I only get 98% of battery. It is not really a problem but i'm just wondering if anyone else has this also.
Sent from my LG-P970 using XDA App
Seems to be phone battery calibration, happens to me too. Try not to unplug the charger immediately after 100%, let it overcharge for few minutes more.
Sent from my LG-P970 using Tapatalk
Also happening to me... It's because battery calibration...
This is the normal behavior of overcharge protection.
imagine you battery is charged till 100%, the overcharge protection now disable charging till the battery is loosing a few % of its charge, but the "battery memory" doesnt recognize this respectively doesnt refresh its state so your battery indicator will always show 100% until you unplug the phone.
if you unplug the phone at 100% it might be, that the battery memory is refreshing after loosing one more % of charge and now recognize, thats it wasnt at 100% at all and show you the current charge.
e.g. if you charge your phone when its off-state, this behavior shouldnt take place and the phone should charge till exactly 100%. important for recalibrating the battery.
Here, if you have root use this
https://market.android.com/details?id=com.liteup.calibratebattery
You can also load up clockwork recovery anf clear battery stats.
If no root access, fo the following.
1.Power on let fully charge
2.turn phone off while still plugged in
3. Remove battery and power cord and push power button for 5 secs
4. Replace battery amd power cord
5. Let fully charge again.
Once charged, power up while pluged in, once phone is fully loaded un plug and monitor battery,
None root battery calibration should be finished.
Sent from my PC36100 using xda premium
When it happens to me... I inmediatly replug the charger and wait... the second time I umplug I get 100% and It seems to repair the issue for the future charges.
i noticed this too! sometimes i do get 100% after charging. But most of the times its 98% immediately after unplug! And i have my battery calibrated too!:/
same issue
any solution for this guys?. I've calibrated my battery so many times and it is not fixing the 98% charge when unpluggin
mine's not...
try screen-on charging...
go to settings>deveLopment>check stay awake(charging)
if you're in Gingerbread version (2.3.4) when battery reached 99%, you"LL need to wait 1 more hour to make it fuLLy charged...
that's it!
tried and tested by most android users...
just charge it without using to avoid excessive heat of your device... :good:
What about first time using battery? Charge the battery 100% first or let it drain to 0% then fully charge?
I bought 2400mah battery, but cant get significant performance, fully charged first time use..
I think you were ripped off.
we will miss you Nicholas.... /s
If your going to buy an aftermarket battery. You get what you pay for. I ordered a mugen 1800mah delivered in 4 days from Hong Kong. My synopsis Bloody brilliant!
Waiting for my Jiayu g2s to be delivered
Hello Everyone,
I've just flashed CM9 stable version and wanted to calibrate my battery.
First, it's not charged to 100% even though I've charged it overnight. Then I've tried to calibrate it.
(1. Charge your phone to 100% full.
2. Reboot to CWM (recovery)
3. Scroll down using volume keys and choose advanced
4. Choose wipe battery stats
5. Reboot phone.
6. Without charging your phone at all... let it die completely until it shuts off.
7. Plug your phone in and without a break let it charge to 100%)
However, that did not work for me. It still charges to 98%, no matter charging overnight. I can't see 100%, even 99%
Any ideas?
Edit: And one more question: Doing a full wipe removes battery stats file?
Thanks in advance
ufuuuck said:
Hello Everyone,
I've just flashed CM9 stable version and wanted to calibrate my battery.
First, it's not charged to 100% even though I've charged it overnight. Then I've tried to calibrate it.
(1. Charge your phone to 100% full.
2. Reboot to CWM (recovery)
3. Scroll down using volume keys and choose advanced
4. Choose wipe battery stats
5. Reboot phone.
6. Without charging your phone at all... let it die completely until it shuts off.
7. Plug your phone in and without a break let it charge to 100%)
However, that did not work for me. It still charges to 98%, no matter charging overnight. I can't see 100%, even 99%
Any ideas?
Edit: And one more question: Doing a full wipe removes battery stats file?
Thanks in advance
Click to expand...
Click to collapse
Once it shows charged on 98%, just remove the charger and then plug it again, it'll start charging again and maybe it'll go till 99% or 100% and will show charged again ..
doing full wipe doesn't remove battery stats
ishangoyal said:
Once it shows charged on 98%, just remove the charger and then plug it again, it'll start charging again and maybe it'll go till 99% or 100% and will show charged again ..
doing full wipe doesn't remove battery stats
Click to expand...
Click to collapse
I will try it tomorrow.
Thanks anyway.
Wiping battery stats is a myth. Your battery may just be starting to go, it is old now.
Sent from my GT-I9000 using xda premium
Maybe try this way:
Wait til charged to, in your case 98%, shutdown phone.
Reconnect charger.
Don't boot phone, wait until charged to 100%.
Boot normally.
If this doesn't work, try to wipe bat stats and repeat this solution.
Sent from my GT-i9001 using xda premium
ufuuuck said:
Hello Everyone,
I've just flashed CM9 stable version and wanted to calibrate my battery.
First, it's not charged to 100% even though I've charged it overnight. Then I've tried to calibrate it.
(1. Charge your phone to 100% full.
2. Reboot to CWM (recovery)
3. Scroll down using volume keys and choose advanced
4. Choose wipe battery stats
5. Reboot phone.
6. Without charging your phone at all... let it die completely until it shuts off.
7. Plug your phone in and without a break let it charge to 100%)
However, that did not work for me. It still charges to 98%, no matter charging overnight. I can't see 100%, even 99%
Any ideas?
Edit: And one more question: Doing a full wipe removes battery stats file?
Thanks in advance
Click to expand...
Click to collapse
charge phone to 100% 3 times and clean battery stats - works !
ishangoyal said:
Once it shows charged on 98%, just remove the charger and then plug it again, it'll start charging again and maybe it'll go till 99% or 100% and will show charged again ..
doing full wipe doesn't remove battery stats
Click to expand...
Click to collapse
yeah that worked for me. thanks.
commercially nilsctu
As far as I know, battery calibration by wiping battery stat's is not working. I've read an article about that when someone's been interviewing with one of Google's Android developers and she said that it's like deleting your browser history, it won't speed up your internet. Same goes with battery stats. It's only information about how long you've charged your battery last time, when you've plugged ur phone etc. etc.
It's more like placebo effect, you delete battery stats and you think it's "living" longer but it's not.
Not charging to 100% is (1)Kernel or (2)ROM issue to not showing correctly battery percentage (besides that battery should be full, it's only showing bad variables)
Grzechu789 said:
Not charging to 100% is (1)Kernel or (2)ROM issue to not showing correctly battery percentage (besides that battery should be full, it's only showing bad variables)
Click to expand...
Click to collapse
It could also be one of the duff chinese replacement batteries that always show 3923nV.
I have just had 2 bilitong batteries that will only charge to 99% and have a vastly lower capacity than claimed.
The 'cameron seino' battery i have also reports 3923 mV all teh time but does charge to 100% (update after full charge - cameron gives correct voltage and early testing shows excellent performance)
The original battery shows everything correctly and still charges to 100%
the only aftermarket battery which iv seen to charge up properly and give the expected life span is one made by a company called anker. I would personally go for an anker battery if I could not source a genuine Samsung one.
slybunda said:
the only aftermarket battery which iv seen to charge up properly and give the expected life span is one made by a company called anker. I would personally go for an anker battery if I could not source a genuine Samsung one.
Click to expand...
Click to collapse
I agree that a new genuine battery is the best option - full stop.
The oversize cameron battery i am currently testing in my desire is proving a mix of good and bad. Definate improvement in battery life, although still problems in reporting correct mV, and rattles a bit in the oversized back (should be easily fixable)
Gonna get around to antutu battery tesating the 2 year old original 1400mAh, poor bilitong 1650mAh (ROFL) and 2400mAh cameron