Database Develop

Force WCDMA Only

Hi all,
Would like to check if anyone knows how could i set "WCDMA Only" (3G Only) on Galaxy S?
I can only Force 2G only via the settings menu, but not 3G only.
Managed to access the "Phone Info" menu via *#*#4636#*#*, selected "WCDMA Only" from the dropdown box.
However, nothing seemed to be set nor i see any button to save the choice?
Anyone happen to know how can i have it set? Or i could manually set it by applying some settings somewhere?
Thanks alot!

you cant force 3g... you would get no signal if you didnt have a 3g connection

boinger66 said:
you cant force 3g... you would get no signal if you didnt have a 3g connection
Click to expand...
Click to collapse
I know that. However, such settings are available in Nexus One.

i2umi said:
I know that. However, such settings are available in Nexus One.
Click to expand...
Click to collapse
It is also available on the HTC Desire :
WCDMA only
GSM/WCDMA auto
GSM only

*#*#197328640#*#* > debug screen > phone control > network control > band selection
You need to do this after each reboot though as it does not stick.

Is there a way to shortcut this with anycut?

-Double Post-
Sent from my GT-I9000 using XDA App (Which seems less than stable...)

The app Network simplifies the procedure quite a bit. Haven't actually gone into a low signal spot yet to see if it fully works as intended though.
Sent from my GT-I9000 using XDA App

thank you very much..i have been searching this high and low...you save my day..

Thank you so much! This helped me diagnose the SGS and see if I have 1900 3G in my area (1 bar). here's a tip that I used for quick access to the debug screen just as a trial and it actually worked
Enter ONLY *#*#197328640#*# then hit add to contacts (notice there is no * at the end).
Give it a name (Samsung Debug Screen) and tap to edit the number and enter the final * at the end.
Save and exit. Now whenever u want to enter debug mode to change the network or other stuff just type *#*# and it should appear. Tap on the contact and voila!

clubtech said:
*#*#197328640#*#* > debug screen > phone control > network control > band selection
You need to do this after each reboot though as it does not stick.
Click to expand...
Click to collapse
Awesome, thanks for this! Lots of fun debug info in there.
boinger66 said:
you cant force 3g... you would get no signal if you didnt have a 3g connection
Click to expand...
Click to collapse
My operator doesn't have a 2G network... all they have is 3G. There's no point in my phone looking for anything other than a 3G network.

Solution added to FAQ

sorry to ask if this is already answered but how exactly to i get to CONFIRM my wcdma only selection? i check it and nothing happens, data connection stays on "G" symbol. I know for sure that at the place where i tested i get NO 3g signal. which means probably that i should be losing all signal after choosing wcdma only. that does not happen. also if i close the phone info app and reopen it, choice gets back to default (3g/gprs).
any help appreciated... I really need this.

forcing to only 3g is a bad move, i tested it on my n1 and i kept dropping calls once 3g lost signal.

raspdeep said:
forcing to only 3g is a bad move, i tested it on my n1 and i kept dropping calls once 3g lost signal.
Click to expand...
Click to collapse
I know but i need it for the internet.. and i need it badly.. please help anyone as soon as possible. thank you guys

Its available in the new firmware I9000XWJM1
Hey, its there in I9000XWJM1 and tested working great as expected! However its a beta so you may see other issues. Not sure if its there in latest stable.

Just to confirm, i upgraded my firmware to XWJM5 today, and i noticed that in settings > wireless and network > mobile networks, there's a new menu 'network mode' in which there's 3 options - auto / gsm only / wcdma only. Nice touch!
In answer to the cynics, there are times when browsing, when the phone is borderline whether to give you 2g or 3g, it does come in handy, and it's safer too, as if i have to browse on 2g it makes me want to smash the phone up!!

spark001uk said:
Just to confirm, i upgraded my firmware to XWJM5 today, and i noticed that in settings > wireless and network > mobile networks, there's a new menu 'network mode' in which there's 3 options - auto / gsm only / wcdma only. Nice touch!
In answer to the cynics, there are times when browsing, when the phone is borderline whether to give you 2g or 3g, it does come in handy, and it's safer too, as if i have to browse on 2g it makes me want to smash the phone up!!
Click to expand...
Click to collapse
LOL "safer"

@OP Although 'WCDMA only' mode may not be a good idea and hence not recommended but just to confirm
my current Build i9000XXJPH have following three modes
GSM/WCDMA (auto mode)
GSM only
WCDMA only

JM8 build also have this mode. I noticed that when I flash the i9000M (bell version) previously it didn't have these modes.

why no Edge network?

Hi all,
i am on O2 Germany network and using AT&T nexus one.
i get 2-3 bars of HSDPA(H /3G, 2-3Mbps) network at my work location but if i move little far from my seat (near to window) i get only GPRS(30-50 Kbps) network but my friends Iphone manages to get Edge network on same provider which my Nexus is not able to get.
can anyone tell me why is it happening so and also i have tested selecting EURO band under phone info settings but no use
TIA

go into the dialer and type *#*#4636#*#*, go to phone information and tell us what setting is selected under Set preferred network type

Jep4444 said:
go into the dialer and type *#*#4636#*#*, go to phone information and tell us what setting is selected under Set preferred network type
Click to expand...
Click to collapse
WCDMA Preferred

Sent from my Nexus One using XDA App

chowdarygm said:
WCDMA Preferred
Click to expand...
Click to collapse
hmm thats not the issue then as WCDMA preferred can still grab an Edge signal, have you tried turning 3G off and see if you can grab Edge anywhere?

i have switched off 3G too but still i am not getting Edge........
can anyone help me plzzzzzzzzzz

Bump.......for the convenience of all to see and help me out

Seems to me you're never going to get 3G, so I'd personally set it to one of the other options, not WCDMA. Don't have the phone in front of me but think the option to pick is clear if you're only going to get EDGE.

Does 2G work on Telus with Milestone?

I'm currently using CM 6.1.2 on my Milestone.
If I switch to 2G mode in the mobile network settings, I have no connection.
If I use the Toggle 2G app, it doesn't seem to really do anything. If I set 2G to use one of the options that don't disconnect me (WCDMA, CDMA or GSM 2g/3g) it still shows 3G in the status bar so I'm not sure what the point is in using the Toggle 2G app.

Wondering the same thing myself...
Does anyone knows the answer?

zeppelinrox said:
I'm currently using CM 6.1.2 on my Milestone.
If I switch to 2G mode in the mobile network settings, I have no connection.
If I use the Toggle 2G app, it doesn't seem to really do anything. If I set 2G to use one of the options that don't disconnect me (WCDMA, CDMA or GSM 2g/3g) it still shows 3G in the status bar so I'm not sure what the point is in using the Toggle 2G app.
Click to expand...
Click to collapse
I am not certain about this (i use rogers), but i believe that telus has no 2G (edge) network. They built a 3G only network just in time for the olympics to replace their cdma network:
So the toggler probably cant find a valid connection and retries 3G.
Manual mode cant find a network at all.
On rogers, i can fallback to 2g. This is normal according to what i think i know.
Sent from my Milestone using Tapatalk

thanks for the info.
That's what I thought so have given up on the idea of getting 2g to work
I guess when it comes to 3g and saving battery life, juice defender will have to do as it can turn off data when the screen is off but still have the phone working.

Well, I think I made some progress with this.
On my phone, I was also loosing the connection when switching from 3G to 2G but it's working now. I can get calls, it's only the data aver 2G that doesn't work now.
I have the Cronos rom on my phone, I can tell you what I did if you're interested.

Yes please do.
If it works on cm6 then at least I can also save juice by not using juice defender... oh the irony... lol
edit: hey look at all them Canadian flags, eh?!
Sent from my Milestone using Tapatalk

Took me a lot of time to find the right switches combination.
Anyway, I have Toggle 2G auto managing the 2G/3G and for the bottom 2 options:
2G network: WCDMA preferred (3G/2G)
3G network: GSM auto (PRL)(2G/3G)
If I check under Setting/About/Phone/Status, I see written mobile network type UMTS.

Hmm... I had those 2 settings reversed when using toggly2g
I will try that.
Right now, my mobile network type shows up as HSPA.
Your post prompted me to find the difference and came up with these 2 useful pages just before my head exploded.
Awesome thread: http://www.howardforums.com/showthread.php/1600012-HSPA-vs.-UMTS
Handy chart at the bottom of http://en.wikipedia.org/wiki/Universal_Mobile_Telecommunications_System

s0ulreaver said:
Well, I think I made some progress with this.
On my phone, I was also loosing the connection when switching from 3G to 2G but it's working now. I can get calls, it's only the data aver 2G that doesn't work now.
I have the Cronos rom on my phone, I can tell you what I did if you're interested.
Click to expand...
Click to collapse
Is this not the same then as just shutting off data?

Caz666 said:
Is this not the same then as just shutting off data?
Click to expand...
Click to collapse
Not sure but I don't think so. You can turn off the data but have the phone connected to the 3G network, right?
I think you could get data over 2G but it's just very slow, right?
With Telus I don't think they allow data over 2G.
zeppelinrox, I wonder why yours shows like this, what do you have active under those settings?
What ROMs are you guys using?

zeppelinrox said:
Hmm... I had those 2 settings reversed when using toggly2g
I will try that.
Right now, my mobile network type shows up as HSPA.
Your post prompted me to find the difference and came up with these 2 useful pages just before my head exploded.
Awesome thread: http://www.howardforums.com/showthread.php/1600012-HSPA-vs.-UMTS
Handy chart at the bottom of http://en.wikipedia.org/wiki/Universal_Mobile_Telecommunications_System
Click to expand...
Click to collapse
When I'm on 2G it shows as UMTS
With 3G (mobile data enabled) I see it alternating from 3G/UMTS to H/HSPA.

I'm on CM6.
My phone always shows HSPA except if I set it to use 2G then it shows GPRS - which is when I have no data and no phone signal.
I did use the Telus baseband file in AOR though... I wonder how it will behave if I use the Canada baseband....
Also, here's a neat trick....
dial *#*#4636#*#*
A Testing App will show up....
Select Phone Information and then goto the bottom.
You can set your preferred Network type.
Ok so that listbox shows all the different options.
The only options that will save are:
GSM only (2g - I get nothing - shows as GPRS)
WCDMA only (3g - shows as HSPA)
GSM auto (PRL) - (3g - shows as HSPA as well)
All the other options either are not selectable or just revert back to GSM auto (as is the case with WCDMA preferred)
I just did a few speed tests and I seem to get faster speeds with GSM auto than I do with WCDMA only
Gonna try that Canada baseband now....
Edit: Same thing. Except the speed test is slower for both WCDMA and GSM autio so best off using the Telus baseband.

The dial trick doesn't work. I dial the sequence as a phone number, right?
It disappears then nothing changes.

ah.. yeah sometimes it takes 2 or 3 tries...
do you use adw launcher?
If so, you can actually create a shortcut for it... I figured it out today.
1 Press and hold on homescreen and select Custom shortcut
2 Press "Pick your activity"
3 Select the second item on the list ie. Activities (with the ADW icon)
4 Wait for all stuff to load, scroll down to Settings, and press the arrow next to it to see the long list of activites that Settings.apk can do.
5 Scroll down near the end of the list, you will see Testing(.TestingSettings)
6. Select that and press OK on the next window.
I also made one for Battery History, which is actually part of the Testing app but is usually only accessible through Spare Parts.

I still can't get the trick to work... doesn't do anything on my phone
Right now I'm on the 2501 rom (latest 2.2.1 from Motorola) and I can say it's the best I've tested so far!
Outstanding battery life!

I found another way to run Testing App.
With Google gesture search you can set it to launch Settings actions
Let it scan and then write "testing" on the screen
Edit: oh crap I mistyped the code.
Its *#*#4636#*#*
I had 4536 before so I fixed it
Sent from my Milestone using Tapatalk

zeppelinrox said:
I'm currently using CM 6.1.2 on my Milestone.
If I switch to 2G mode in the mobile network settings, I have no connection.
If I use the Toggle 2G app, it doesn't seem to really do anything. If I set 2G to use one of the options that don't disconnect me (WCDMA, CDMA or GSM 2g/3g) it still shows 3G in the status bar so I'm not sure what the point is in using the Toggle 2G app.
Click to expand...
Click to collapse
Well, after doing some more tests and trying different apps (2G/3G switchers) I can say those apps work only if your cell phone company has both 2G/3G network.
In Montreal, only Rogers has both.
Easy to test (btw: I'm using the FroyoMOD rom): go in "Settings" -> "Wireless & Networks" -> "Mobile Network Settings" and check "Use only 2G networks".
See if your cell phone company is listed when you do a search under "Network Operators". If it's not, don't bother using a 2G/3G switcher.
When doing this, in Montreal I see only Rogers listed. If I uncheck "Use only 2G networks" I see all 3 of them: Bell, Telus and Rogers.
Hope this helps!

[Q] Reenable 4g after disabling it?

I am running the AOKP-targa-milestone-4 mod of ICS and i set my phone mode to just cdma because data kept dropping. Now 3g and wifi are completely stable and i would like to change the mode back to cdma/lte but my bionic wont let me, i press on the cdma/lte mode and it reverts back to just cdma. Any i can do to re enable 4g?

Go to the dialer, enter *#*#4636*#*# then tap "Phone Information" and then under "Set Preferred Network Type" and you should be able to find an option that looks like either
1. CDMA/LTE Auto (PRL)
2. GSM/CDMA Auto (PRL)

projektorboy said:
Go to the dialer, enter *#*#4636*#*# then tap "Phone Information" and then under "Set Preferred Network Type" and you should be able to find an option that looks like either
1. CDMA/LTE Auto (PRL)
2. GSM/CDMA Auto (PRL)
Click to expand...
Click to collapse
Thanks a bunch, ill try that-----It worked well, thanks a bunch! Also the app Phone Info in the market does the same thing! Hopefully 4g just doesnt drop now!

[Q] Id like to turn off 4g and just have 3g

hi guys id like to be able to turn 4g at work and just have 3g does anyone have a idea on how I can do this, on a none rooted phone

Onetearfalls said:
hi guys id like to be able to turn 4g at work and just have 3g does anyone have a idea on how I can do this, on a none rooted phone
Click to expand...
Click to collapse
Open your dialer and type *#*#4636#*#* the testing menu should open.
Select Device info.
Now scroll down to where it says "LTE/GSM auto (PRL)".
Now scroll up to where it says "WCDMA preferred" and select it. Your network should now say HSPA:11.
Don't switch to "LTE only" as voice and text wont work since LTE is data only, at least until At&t deploys VoLTE.
The note 3 should retain your selection until you reboot. This also work on the Note 2.

speedy1979 said:
Open your dialer and type *#*#4636#*#* the testing menu should open.
Select Device info.
Now scroll down to where it says "LTE/GSM auto (PRL)".
Now scroll up to where it says "WCDMA preferred" and select it. Your network should now say HSPA:11.
Don't switch to "LTE only" as voice and text wont work since LTE is data only, at least until At&t deploys VoLTE.
The note 3 should retain your selection until you reboot. This also work on the Note 2.
Click to expand...
Click to collapse
That no longer works on AT&T Samsung devices made after the S3 and onward. The disabled that dial code to make their network more uniform and controlled.

Solarenemy68 said:
That no longer works on AT&T Samsung devices made after the S3 and onward. The disabled that dial code to make their network more uniform and controlled.
Click to expand...
Click to collapse
The screenshots I posted came from my at&t note 3.