Error on my froyo flash !!! (GETTING CLOSER to issue) - Captivate Q&A, Help & Troubleshooting

Hey guys,
i flashed my cappy from cog to the froyo but data and voice didnt seem to work, flashed back to stock then did a master clear and reflashed to froyo and same issue no data or voice, it shows the airplane mode although the setting says its off...
any suggestions?
EDIT: com.android.phone seems to be the problem, i cant access it using the *#... etc method...
how can i fix this?

I would try doing a master clear, then one-clicking. Also, some others said that simply rebooting may help. Also, is applicable, dont restore "system apps and data" from titanium backup, only "missing apps plus data" hope this helps

nope didnt work, i didnt even restore anything yet, its just weird because everything works flawless except voice and data....any help is appreciated

Settings
Wireless and Network
Mobile Networks
Access Point Names (is it empty? is there an entry but it doesnt have a green dot next to it?)
Menu button
Reset to Default
OR
if default does not work, try adding a NEW APN. you will find settings around the forums for APN

Go to settings and do a reset to factory in there. That fixes a similar error for me.
Sent from my SAMSUNG-SGH-I897 using XDA App

1.) Master Clear with current ROM
2.) Flash to stock JF6 using ODIN
3.) UPDATE TO JH7 using KIES MINI (I think this may fix the airplane mode issue)
4.) Flash to Froyo using ODIN'
This is exactly what I would do, let me know how it works for you buddy!

nope, i cant even access mobile networks it gives me an error "check simcard if its inserted" but it is, and when i flash back to jm or jh it works fine...

sarsourus said:
nope, i cant even access mobile networks it gives me an error "check simcard if its inserted" but it is, and when i flash back to jm or jh it works fine...
Click to expand...
Click to collapse
So only the update to JI6 (Froyo) causes the issue?
Maybe the link you downloaded from was corrupt? There was about 20 links last night haha.

yea only the ji6, cant be corrupt because i downloaded the orginal (was one of the first to download it) and a mirrored one.... still something fishy, be in mind i did have cog with voodoo and i never disabled it the lag fix... but im guessing the whole rom wouldnt work if that was the issue correct?

VooDoo would have been cleared when you did Master Clear, I believe.
Maybe try the Kies Mini update to JH7 and THEN flash the Froyo.
http://forum.xda-developers.com/showthread.php?t=794363

sarsourus said:
Hey guys,
i flashed my cappy from cog to the froyo but data and voice didnt seem to work, flashed back to stock then did a master clear and reflashed to froyo and same issue no data or voice, it shows the airplane mode although the setting says its off...
any suggestions?
Click to expand...
Click to collapse
just do a simple re-boot......it looses the baseband after froyo update...a simple re-boot gets the baseband back.....try it!

neo_31591 said:
just do a simple re-boot......it looses the baseband after froyo update...a simple re-boot gets the baseband back.....try it!
Click to expand...
Click to collapse
..If this fixes it I will be shocked haha.
That's the FIRST thing I do if I run into any problems on android

im trying the kies jh7 then flash method, but i did reboot several times and baseband never came back....should it be unplugged to pc or plugged?

Let me know how the Kies JH7 and then Flash method works for you; I think it SHOULD work because I was on stock JH7 when I flashed to Froyo JI6 and I have had nothing but a great experience since!

sorry guys neither method worked, im guessing its a simple stupid fix...... its getting frustrating ...........

I was reading other posts where guys were having that issue with phones that were not on att network. This seems to lock you onto att and no other network will work. At least that was the opinion of the other posts.

FOUND THE PROBLEM BUT CANT SOLVE IT !!!!
com.android.phone ---> is corrupted, i tried going into it and it doesnt let me giving me a FC..
any one got an dea how to resolve it?

Start from scratch my friend:
1.) Re-Flash Stock ODIN JF6 and then update to JH7 using Kies Mini
2.) REDOWNLOAD Froyo JI6 using the same link I did:
http://www.ponack.net/designgears/I897UCJI6-OCD-REV02-Low-designgears.exe
3.) Before Flashing JI6 please do a master clear, factory data reset and FORMAT all your SD cards
Then that should solve any problems you have buddy!

just so i know im doing it right... can you tell me how to do a master clear please !!

To do a master clear, enable usb debugging on your captivate, go to the homescreen, open odin, plug in your device. Once it is recognized press master clear from the homescreen. It will clear it and reboot your device
Sent from my SAMSUNG-SGH-I897 using XDA App

Related

[Q] Please help me :(

I tried to upgrade to the new 2.2 froyo and all it gave me was the JM2, I had JM1 so I did it. Then the phone started to turn itself on and off again, so I did a factory reset from the recovery menu. Now nothing works and everything pops up with force close. I can't do anything but get back to the 3br. Please, I'm sure I'm getting freaked out for no reason but it's 4am here and I've been working on it for hours trying and looking for something.
did u have a lagfix installed on your phone before u started flashing to 2.1.1 ?
Very similar issue here - used regedit hack to get 2.2 - all I got was the JM2, phone was working fine, but I did factory reset hoping to clear all the old data, after this all I get is "Sorry!, The application TwLauncher (process com.sec.android.app/twlauncher) has stopped unexpectedly. Please try again"
I did have lag fix, but unnistaled it before upgrading to 2.2
How this could be solved ?
install via odin. Kies is a P.O.S
Got the same problem.
Installed Froyo using Kies and the registry hack. After rebooting I checked my Android Version: 2.1 Update 1. So I followed the instructions to do a factory reset. Now all I can do is boot the phone and type in my pin-code. Then there are lots and lots of popups telling me a process has stopped working ...
Can anyone help? Is odin really the only way to regain access to my phone?
Factory reset, clean cash, wipe internal sd-card
I already wiped the cache and also did a factory reset twice. When entering recovery mode I receive the error: "multisc: can not acces to /system/csc/DBT/system/"
How to wipe the internal sd card then?
I have the same problem! Have a brand new Vodafone handset (no lag fix etc.), ran the regedit patch and whilst I didn't get 2.2, I stayed on 2.1 update1 but unbranded. Was delighted to get rid of bloatware but after a factory reset, the same problem!
Using my registry settings, I flashed back to Vodafone firmware but the problem still remains
OK wiped and then even formatted the internal sd-card - did this from windows explorer whilst connected via usb.
I then did a wipe/factory reset, wiped the cache and then reboot.
Still the same problem!
I eventually got it to work
I flashed via Odin, the JPK firmware and that was stable enough to get some sleep. In the morning, I flashed JPM and then rooted and lag fixed. I took the lag fix and even the root off of it before trying to upgrade on Kies so I have no idea how that happened. I'm thinking that flashing with the new ROM is the only way to get it un-bricked after that but it's good anyway because now it has FroYo with root and lag fix even though I was originally trying to keep updates to official channels so to speak (guess I found out just how unsafe the official way is vs. the unofficial way).
Me too! Thanks for the advice, I ended up doing the same!
Only difference is I updated to JPM firmware as shown on this forum - works perfectly Likewise I would have preferred not to have to do the unofficial way - guess my warrranty is now void?
Out of interest, I found it hard to figure the difference between JPK and JPM but I seemed to conclude that JPM is a slightly more recent and technically the 'final' of Froyo?
Flashed via Odin and it started to work, finnaly.
Good question regarding formware versions - it is interesting for me also !

Strange Captivate issue

OK.. First of all I want you to know that I'm not a n00b and that 99% of the cases I know what I'm doing with my phone but this is a weird one
Problem no.1: The simcard keeps on "disconnecting", resulting in disconnection from the network. Since the first seconds I start the phone it does this. Sometimes it doesnt even accept my PIN as being incorrect, but in the notification bar the SIM+! icon disappears for a moment. This is after I screwed a ROM and returned to stock using the OCD JF6.
Problem no.2: It wont master clear! No matter what I do, it wont do it. I tried since the first second when ODIN detects the phone. I tried it when it fully loads the ROM, it just wont go.
Background: Before, I had installed Froyo JPA i9000 ROM with Reoriented kernel 2.1.2 (voodoo lagfix+color,bln). Everything was soooooo fast on that ROM (with around 100 apps installed) but I wanted to theme it. So I tried to deodex it using xUltimate. I followed the (logical) instructions found in a post here and it didnt want to boot anymore... well, it did but in a FCs symphony.
I did what I believed is right and I returned to stock but I forgot to pull out the SIM card... then these problems appeared.
Gimme a hint what could I do. I'm asking first here because a working PDA without a SIM is .. acceptable but a totally bricked one is worse so before I take any steps further I need your opinion.
Thanks a lot.
No one?
Sent from my SAMSUNG-SGH-I897 using XDA App
icezar1 said:
OK.. First of all I want you to know that I'm not a n00b and that 99% of the cases I know what I'm doing with my phone but this is a weird one
Problem no.1: The simcard keeps on "disconnecting", resulting in disconnection from the network. Since the first seconds I start the phone it does this. Sometimes it doesnt even accept my PIN as being incorrect, but in the notification bar the SIM+! icon disappears for a moment. This is after I screwed a ROM and returned to stock using the OCD JF6.
Problem no.2: It wont master clear! No matter what I do, it wont do it. I tried since the first second when ODIN detects the phone. I tried it when it fully loads the ROM, it just wont go.
Background: Before, I had installed Froyo JPA i9000 ROM with Reoriented kernel 2.1.2 (voodoo lagfix+color,bln). Everything was soooooo fast on that ROM (with around 100 apps installed) but I wanted to theme it. So I tried to deodex it using xUltimate. I followed the (logical) instructions found in a post here and it didnt want to boot anymore... well, it did but in a FCs symphony.
I did what I believed is right and I returned to stock but I forgot to pull out the SIM card... then these problems appeared.
Gimme a hint what could I do. I'm asking first here because a working PDA without a SIM is .. acceptable but a totally bricked one is worse so before I take any steps further I need your opinion.
Thanks a lot.
Click to expand...
Click to collapse
Problem 1: can probably be fixed by reflashing stock with the SIM card *not* in the slot (that's about my only guess, never seen that).
Problem 2: master clear must be done with the phone turned on *NOT* download mode. the phone must be fully booted with adb debugging enabled in settings.
xUlimate: it's a poorly written application and it's success ratio is probably about 50/50, another tool to look into is auto-deodexer. Also, both the framework AND the system apps need to be deodexed to have everything play nicely (gtg taught me this one)
id experiment. from what i gather you were able to flash jf6 but it was a bad flash. does it still have download mode? maybe try to flash again and then try to master clear? maybe try to flash another rom, then try to flash back to stock?
this doesn't sound like anything anyone has seen before so your best bet is to just try something.
Thanks a lot for the replies guys!
The master clear was tried from all phone statuses (booting; finished booting; after the phone operated for a while) except download and recovery (i know is not suppose to be done from there).
I did reflash to stock without the SIM, same issue.
I will try flashing again some other rom. I'll try more and ill post the result here
Sent from my SAMSUNG-SGH-I897 using XDA App
OK, so, it seems that for some reason, after stock restore there were still remaining of XEE CSC in the phone..
I loaded the JPA back and now is all fine.
I am having the same issue, unable to clear with CWM or odin, or within the OS in either the stock rom or axura 4 or 5...
Can you please elaborate on your solution?
CSC looks familar to me, thats an ODIN file right? If so, what part of the phone would that be (kernal, modem, OS)?
What do you mean by load JPA? Odin package or CWM? WHole rom or specific parts.
thanks...this has got me stumped
Well, my issue is that I cannot use 2.1 anymore (any 2.1, tried stock Captivate and JM8 from i9000), I don't understand what is wrong but my first bet is that the /efs partition got changed in some way when I loaded JPA i9000 ROM.
Froyo works fine, any ROM I load give me full functionality but on 2.1 the SIM gets disconnected all the time and after a while the phone reboots by itself. Just to make it clear, I never had the usual Captivate reboot issue, it started when this SIM problem appeared.
Note: my product codes are fine, in both nv_data.bin and nv_data.bak the product code is finishing in ATT and my IMEI is available in both 2.1 and 2.2 and is correct, so no IMEI corruption here.
Could someone give me a hint?? Would flashing to stock with phone EFS clear help?

[Q] Loss of Network Service

I have the SGS GT-I9000M from Bell, was running Froyo 2.2
Decided today to dabble around with rooting and roms.
Followed all the directions to installed Darky's v9.2 Extreme Edition w/ Voodoo 5.4.1 kernel.
Everything went flawlessly and everything runs slick. Except for one small issue.
Now I seem to be losing network connectivity. Sometimes it will remain on "Bell", other times it will just display "No Service" or "Emergency Calls Only".
Have I missed something or done something incorrectly?
Any insight on this would be great.
Thanks in advance.
Also, is there a way to revert back to stock 2.2 if necessary?
Revert to stock via Odin
Darky problems check Darkys posts and FAQS .
jje
Tried and failed.
Went through every Darky's post I could find and can't seem to see anything like this being mentioned.
I even tried the Resurrection version, now my phone is a brick.
Does nothing but reboot over and over at the start.
Can't get into Recovery, only Download mode..
Suggestions?
Go to sam firmware.com download the android version 2.1 update 1 ughj2 or whatever its called. when its done downloading put your phone in download mode but first open up odin. select 512 pit and check repartion. Choose the firmware as pda and connect your phone to the computer and press start wait until odin finish flashing it and comeback and tell us what happened
I was able to get the phone working again, pretty much what you just said.. but with 2.2
Only issue is now I have no data network connectivity.
Zero options for it in the settings, and I've even called my cell provider..
They keep telling me to wait a few minutes and it will reconnect..
It's been a few hours..

[Q] Need help connecting to data!

Im new to flashing roms, so bare with me. I flashed my first rom last week, using Andromeda3 and Ursa Minor #2 kernel, everything worked great except, i couldnt connect to 3G/H, even though it showed up on notification bar, tried looking for answers, i ended up flashing different modems to no avail. So, i flashed back to stock eclair, used kies mini to upgrade to Froyo 2.2 UCKB1, Data worked. I then flashed UCKB2 rom, data didnt worked) i tried wiping cache and all that, still no data connection, btw, wfi worked. So i flashed back to UCKB1, again, everything worked perfectly. The other day, i flashed Fusion XI and GB bootloaders, i must say i like this rom very much, but again still couldnt connect to 3G/H, everything else worked, although i havent tested the GPS yet, i am getting amazing DL/UL speeds through wifi. Anyway, i searched XDA for any answers i could find and pretty much tried them all, seems like only KB1 3G will work, but any custom rom out there, data hasnt worked even though i see it in notification area, i'd use market and browser, but would say could not connect. Am i doing something wrong/ missing a step?? I really like Fusion XI and dont want to flash back to stock. Any help would be appreciated.
Didnt know where else to post this, seems like other people dont have the data connection issue :/
That's weird.
Try flashing the kb1 modem on fusion.
I did try flashing the KB1 modem, but that too, didnt work. it only works if i go back to stock KB1 for some reason.
where do you live? what Carrier are you with?
have you checked your APN settings?
fill in your location and carrier/ device info in your signature/ xda user information.
I Live in Southeastern Pennsylvania. And currently have AT&T as my carrier. I tried APN settings, but not sure what to set it too, i have used APN Manager from the Market.
Try resetting ur apn settings to default. Then reboot.
Sent by XDA Premium App
how do u reset apn settings?
Settings, wireless and networks, mobile networks, access point names. Now hit the menu key and reset default apn well be on the bottom left...
Ok, tried that, still a no go connecting to data. I just flashed stock 2.1 then 2.2 update through Kies mini, i no longer have data connection even on official stock roms could this be a hardware issue??? gps sucks. ran a gps test using the app from market. other than that, everything else is working. what did i do wrong?

Networks detected but will not register

So I had some escapades today, I had my SGS running jellybean, then I tried to change the screen density and bang, bootloop. I panicked and after some odin fiddling managed to get it booting Darky using odin. I was in a room with no signal at the time so I thought nothing of not having any signal, even so I then went ahead and used recovery to reinstall my Jellybean rom since that's a bit nicer than the 2.3 Darky.
Long and the short of it is, I can search for networks in my options and it will find them, but when I tell it to connect to one it says "Can't connect to this network right now. Try again later"
I have tried later and surprise surprise it didn't work. I have tried installing a different radio, clearing the dvalik cache and fixing permissions as well as a few other things. Please can anyone suggest something, this seems to be a very uncommon scenario and it's stressing me out that I can't find any solutions.
alzrnb said:
So I had some escapades today, I had my SGS running jellybean, then I tried to change the screen density and bang, bootloop. I panicked and after some odin fiddling managed to get it booting Darky using odin. I was in a room with no signal at the time so I thought nothing of not having any signal, even so I then went ahead and used recovery to reinstall my Jellybean rom since that's a bit nicer than the 2.3 Darky.
Long and the short of it is, I can search for networks in my options and it will find them, but when I tell it to connect to one it says "Can't connect to this network right now. Try again later"
I have tried later and surprise surprise it didn't work. I have tried installing a different radio, clearing the dvalik cache and fixing permissions as well as a few other things. Please can anyone suggest something, this seems to be a very uncommon scenario and it's stressing me out that I can't find any solutions.
Click to expand...
Click to collapse
check apn settings?
slaphead20 said:
check apn settings?
Click to expand...
Click to collapse
Yeah I've checked them and unfortunately they all seem to be in order still, though there are a lot more settings than any website offers things to put in them
same problem
i am having this same problem on all cyanogenmod 7,9,10. i have tried many radio and modem flashes. i can scan and see networks, but i can never connect to them.
have you made any progress?
Problem is EFS folder which tends to do with IMEI.
To fix it you need to copy the backup EFS folder from your SDCARD to the root of your device. (/)
If you don't have a backup you'll have to ODIN back to stock and re-root....etcetera
Sent from my GT-P7500 using xda app-developers app
thx
thank you for the response. I put it back to stock lastnight before bed so i will give this a try.
i have the gti9000m from bell in canada. I updated it through kies to 2.3.3 gingerbread and it all went badly. It would boot up and load to the os be on for a bit then reset. It turned out to be wifi problem, running it on airplane mode stopped it from rebooting. Then if i tried to turn on wifi it would quickly reboot.
So then i tired all the cyanogenmods, which worked it stopped rebooting all the time. however the wifi would connect and work for about a minute then it would drop. doing the
1.turnOn gps
2.turnOn wifi
3. turnOff gps
this would let the wifi work again for about a minute. I tried all the wifi fixer apk, and a bunch of wifi.zip mods, and then ping the router gateway constantly, none solved this problem. Very annoying because i need the wifi working for develpoment of apps. I have spent a great many hours on this problem. lots of people seam to have this problem but no solutions have wokred for me.
So, my questions are....
1. does your wifi work?
2. how the heck do i get mine to work?
back to stock
After going back to stock then upgrading connecting to network operators is fine.
wifi is still broken though

Categories

Resources