Related
hello everyone
recently downloaded the middle east version of the SGS FW i9000JPJG8 since i couldn't find the original FW i9000JXJF1 , so i looked around and prepared myself.
everything downloaded and ready for the flash
used a youtube video looking at a detailed guide to flash my sgs
i downloaded the .512 pit file but the other 3 files r missing
i notice the big FW file has 3 files starting with CODE , CSC and another CSC files
my big FW file JPJG8 has got a folder ( OJP_JG9 ) and the files in it are
zImage
param.lfs
modem.bin
factoryfs.rfs
dbdata.rfs
cache.rfs
totally diff from the files i saw in the video , where do i go from here ?
any help is much appreciatted
You need help to search not to flash. Don't try things if your not able to. You will never finish it in a working way. Video is for dummies and if you use a vid just follow these steps and USE the files they using.
Well I know for sure I won't go ahead with it until I find the right procedure.
Thanx for your reply but I did search around and well I didn't find a different way than the way posted in here which is exactly the same as the video I found. Anyways I'm still looking around, if anyone could shed some light on this Q id be very grateful.
Thanx in advanced for any help
Sent from my GT-I9000 using XDA App
Basically you've come across a directory of extracted filesystems.
I recommend you avoid trying to use them and rather find another Firmware to flash that comes with the pre-packaged tarball files.
You might understand what I am referring to by looking here... http://screen.pixalgames.com/23-08-2010_5400.png
sturmeh said:
Basically you've come across a directory of extracted filesystems.
I recommend you avoid trying to use them and rather find another Firmware to flash that comes with the pre-packaged tarball files.
You might understand what I am referring to by looking here... http://screen.pixalgames.com/23-08-2010_5400.png
Click to expand...
Click to collapse
Thanx for your reply sturmeh
iv looked around for any other versions of the FW even same versions from diff sites and nothing seems to be different , same files , iv tried to even look for my current FW and had no luck finding it
Pda : I9000jpjf4
Phone : I9000jxjf1
CSC : I9000jpjf4
pretty much im going thru all this hassle for some arabic support , if i can find an FW which will show me msgs in arabic and allow me to type in arabic , id be very happy. i dont need Arabic in the phones menus what so ever. just need to be able to reply when needed.
Sounds like you extracted the actual tar file. Don't. Just flash it as the pda file. You don't have to flash all 3 files.
Hi All,
I Upgraded my Samsung Galaxy S to Froyo 2.2. All seems well but the performance does not seem all that great as well.
If i want to restore back to the Standard Manufacturer Firmware (i was on JG4) that comes out of the box with the I9000 what do i have to do? Any help here would be appreciated.
Download the firmware from samsung-firmwares and flash your phone with odin. There is plenty of flashing tutorials about to show you how to do it. Although if you managed to update to froyo then you properly already know how to flash it again
Sent from my GT-I9000 using XDA App
Restore
Hello. I managed to get the firmware from samfirmware.com for the original 2.1 (Asian version) but I couldn't get it to follow through. There would always be an error with regards to MD5 or something. What do I do? Thanks
Ren Hayashi said:
Hello. I managed to get the firmware from samfirmware.com for the original 2.1 (Asian version) but I couldn't get it to follow through. There would always be an error with regards to MD5 or something. What do I do? Thanks
Click to expand...
Click to collapse
I have the same problem as well, any helps here please?
Alot of the the DXJG4 firmware out there is corrupted.
So, try download DXJF4 from samfirmware.com (and flash with Odin with 513 pit) then uprade to DXJG4 through KIES.
NOTE: If KIES says "Device version's cannot be upgraded". Then you need to change your product code back to "XSO" (Search the forum on how to change product code.... about editing the nv_data.bin file)
My Flash history:
DXJF4-->DXJG4-->XXJPK-->DXJG4
I'm pretty new....
The firmware versions you guys are talking about are I hope, all "software" version and not real hardware chip revisions?
thanks
why dont you just flash your phone with 2.2.1 or 2.3.3(latest).....i know 2.2 is quite unstable FW but 2.2.1 will help a lots......I dont think you need to downgrade the phone back to the stock FW to solve any problem
I want to be able to flash the KIES firmware trough odin. I allready managed to download GT-I9000_I9000XWJPA_I9000XENJP2_I9000XXJPP_I9000XWJPA_XW_XEN.zip.enc This is the firmware I installed trough kies and is currently on my phone. I want to create Odin separate file package in case I **** something up I can always return to my original firmware. Could someone provide the decryption code for http://fus.samsungmobile.com/Phone_...00XENJP2_I9000XXJPP_I9000XWJPA_XW_XEN.zip.enc . Many thanks in advance!
If you have upgraded via Kies you might be able to find the unecrypted rom in a temp directory of your computer.
Orcie keep me posted on your findings?
I already posted a Odin flashable JPA rom.
It is the same as the one from Kies, but it has been converted to a mid package to allow flashing with Odin.
CSC_I9000XENJP2-SINGLE
GT-I9000_I9000XWJPA_I9000XXJPP_CODE-MODEM_OSP-MID
Allready spotted that. Have the code now 55625. Richthoven how do you convert from single file to mid level package? I can tell what files need to go where but it seems that I need something extra?
Does anyone know a proven method to restore my product code through the nv_data file in the efs folder? Like many who flashed to Froyo on here, My code is showing as HKKOR and should be back to stock HKOPS (Australia). Or any other way if possible.
If not, will I be able to update to the official Froyo through Kies when it's released?
If you are with Froyo, Flash multi CSC JP3 through ODIN and select your area will set your Product Code. It worked for me.
use root explorer and delete both your nv_data.bin and nv_data.bin.md5 files and reboot.
correct product codes will be recreated from your .bak files.
kies checks your product code before upgrading, but there are patcher programs to take care of that, if you want.
both topics have been discussed to death previously, I kindly suggest you do some search before posting next time.
That sounds like it might work. Do you have a link for that JP3 Rom? and does it have to be JP3.
I had just flashed back to a clean JG4 just need to restore that product code.
Sorry, I just see that you're from Australia requiring OPS csc file.
JP3 csc file will not include Australia.
You have to find a multi csc file that include your area code.
Multi csc file ask to choose area amongst several, then when choosing correct area it set this area into the product code.
Hey guys, please, i have one btw question:
I have unbranded and unlocked product code I9000HKDDBT (Debitel,Germany), but i want put firmware XFJP7 with Multi CSC XXJP7 wich have Croatian APN settings...Can I make this without any dangerous ? At this moment im on firmware in my signature wich is not for my prod.code too, but fw work like a charm, and with staying my original product code in nv_data.bin without restoring (original from stock firmware).
Or: Can I put only Multi CSC XXJP7 with Odin (without PDA and MODEM files) on my presents (XWJP6) firmware?
P.S. What i must care, i will not to stay without Download and Recovery Mods (3-comb buttons) ?
Forwarding thanks on answer
Regards
MPM86 said:
That sounds like it might work. Do you have a link for that JP3 Rom? and does it have to be JP3.
I had just flashed back to a clean JG4 just need to restore that product code.
Click to expand...
Click to collapse
See this post : http://forum.xda-developers.com/showthread.php?t=787163
also found this :
http://forum.xda-developers.com/showthread.php?p=9352031#post9352031
MPM86 said:
That sounds like it might work. Do you have a link for that JP3 Rom? and does it have to be JP3.
I had just flashed back to a clean JG4 just need to restore that product code.
Click to expand...
Click to collapse
JP3 is seriously old rom.
dupel said:
JP3 is seriously old rom.
Click to expand...
Click to collapse
I know, badly. I'm just trying to prepare for the official froyo when it hits. I have a feeling it will be a disappointment, then I'll be back to a rooted JPO or something. I was still on JPK
Sent from my GT-I9000 using XDA App
Firstly, apologies if this is already posts elsewhere, but I have tried looking for this with no joy (there's aloooot of threads n here lol)
I recently upgraded to the leaked official 2.3.3 using odin (sbl version).
However, I would like to flash with stock software now to get the official upgrade on my Galaxy S via Kies.
Can someone please help or point me to a guide on doing this and where i can download the correct version. I assume its not as straightforward as simply downloading a stock version of Froyo and flashing as I did to upgrade.
My Current phone version is showing as PDA:JVK / PHONE: JVK / CSC:JVK (CPW)
I should point out that this is the first time ive flashed software on my phone, so ideally a step by step guide, if there is one out there
Thanks for any advice you can give
Ok first of all what you need to do is download an older firmware, preferably in 3 files.
Look here: www.samfirmware.com (you need to register, free)
or look here: http://forum.xda-developers.com/showthread.php?t=846913
when you have your selected firmware, you need to download a software called 'Odin', this is what we use to flash firmwares to our devices. Look here for a tutorial http://forum.xda-developers.com/showthread.php?t=723596
when you have 'Odin' and your 'Firmware' you may also need a 'PIT' file, this is explained in the above link. This will re-partition the device and restore the 'bad blocks' and remove any lagfix / altered file-systems ect ect.....
Because you are on Gingerbread at the moment, its possible that you have changed your boot loader, in order to restore this back to Froyo bootloader, i think the firmware you will need is JM1 ( you may need to search here / google for the correct answer)
anyway when the whole process is completed, you should be able to connect to KIES and flash the latest release.
Any problems just write back. im sure we can help get you going !!
azzledazzle said:
Ok first of all what you need to do is download an older firmware, preferably in 3 files.
Look here: www.samfirmware.com (you need to register, free)
or look here: http://forum.xda-developers.com/showthread.php?t=846913
when you have your selected firmware, you need to download a software called 'Odin', this is what we use to flash firmwares to our devices. Look here for a tutorial http://forum.xda-developers.com/showthread.php?t=723596
when you have 'Odin' and your 'Firmware' you may also need a 'PIT' file, this is explained in the above link. This will re-partition the device and restore the 'bad blocks' and remove any lagfix / altered file-systems ect ect.....
Because you are on Gingerbread at the moment, its possible that you have changed your boot loader, in order to restore this back to Froyo bootloader, i think the firmware you will need is JM1 ( you may need to search here / google for the correct answer)
anyway when the whole process is completed, you should be able to connect to KIES and flash the latest release.
Any problems just write back. im sure we can help get you going !!
Click to expand...
Click to collapse
I think that JM1 is eclair...
froyo works with the gingerbread bootloaders so you should just be able to flash a froyo rom i THINK.
Hi im also wanting to do the same looking at the samfirmware files would JS8 be ok to flash?
neoian1277 said:
Hi im also wanting to do the same looking at the samfirmware files would JS8 be ok to flash?
Click to expand...
Click to collapse
Any froyo ROM is fine as long as it contains the bootloaders as gingerbread ROMs have different ones.
Download your ROM. Check inside the PDA (sometimes code) tar. If you can't see by clicking on it find instructions how to untar it.
There should be a boot.bin and an sbl.bin if there is you're good to go. If not flash another one that has.
You can always reflash with your preferred froyo ROM after the initial flash has downgraded the bootloaders
This link tells you all you need to know about flashing with Odin.
http://samsunggalaxysforums.com/showthread.php/2921-How-to-use-Odin-to-upgrade-to-Froyo-from-Eclair
Sent from my GT-I9000 using XDA App
Ok, I tried flashing using the JPY firmware. The process seemed to go okay.
But only getting the 'S' logo for ages then the phone starts ocaasional quick vibrations and screen eventually goes black.
Have tried rebooting ans reseting.
Please help
First boot after a flash does take a long time and you may get the odd little vibration. The screen may go black for a little while. Be patient. If nothing happens after six or seven minutes pull battery try again. If still no good reflash.
You did check repartition in Odin? And use. 512 pit? You need the pit file for a reflash.
Maybe md5 your firmware to check you didn't get a corrupted download.
If you can still get download mode don't worry you will be able to sort it. Most people on xda brick their phones most weeks!
Sent from my GT-I9000 using XDA App
well i reflashed the 2.3.3 leaked and its working for now, will try again tomorrow, getting a bit late.
Was wondering about whether I should try the JM1 instead of JPY. But, on the Sammyfirmware website they only had XW***JP1 which I understand is not for UK/Europe (mine is XX)?
But thanks everyone for your help so far, i may be back on in tears tomorrow
You can use any firmware - they were released with different codes in different regions but if you use a multi CsC like the one in the jpy ROM it doesn't matter because its the csc file that does the regional settings not the PDA file
Sent from my GT-I9000 using XDA App
Hmmm well showing on Samsungs FB page that the ginerbread update has been pulled (by Google)
Guess i'm sticking with the leaked version for now
Sorry to muscle in on this thread but I'm trying to go back from GB 2.3.3 to Froyo 2.2.1. I've flashed JPY with Odin, used repartition, 512 pit and registry patch 1.82 to XEU, phone works fine. Well, Kies then recognises that there is a new firmware (JPY as it happens) and starts the upgrade process, I then get an error message saying that this version can't be updated
Any ideas??
MTIA
maybe you will find some info in this post.....
http://forum.xda-developers.com/showthread.php?t=1044534
Anybody tell me what is lagfix and why it is used for?
and why different kernels are used
Galaxy S XWJVB
richard2311 said:
maybe you will find some info in this post.....
http://forum.xda-developers.com/showthread.php?t=1044534
Click to expand...
Click to collapse
We now have two threads on the same subject but as this was started first I'll continue with this one.
Thanks for the suggestion, I flashed JPU but unable to connect to Kies so flashed the 1 file JPY but still got the same error message with Kies. Maybe I'll try reinstalling Kies and see what happens.
OK, I've reinstalled Kies, changed the product code in the phone with *#272*IMEI# to XEU and now Kies tells me that I have the latest firmware - great bring on the official version of GB.
can anyone give me a link of jpy firmware with bootloader?
the ones from samfirmare.com are WITHOUT bootloader...
Okay, seems that Samsung have finally released Gingerbread.....again. So am gonna make another attempt at downgrading to Froyo so I can get the official Gingerbread update.
However, because of the issues I had with my last attempt, I would like to make sure I am doing it correct.
Current Phone Software
Model: GT-I9000
Firmware Ver: 2.3.3
Baseband Ver: I9000XXJVK
Kernal Ver: 2.3.35.7-I9000XXJVK-CL75655 [email protected] #2
Build Number: GINGERBREAD.XXJVK
I believe the version I installed included the bootloader
The phone was purchased in the UK on T-Mobile but supplied through Carphone Warehouse
Steps:
Downloaded: I9000XXJPY (single file) & 512.pit from Samfirmware (does this contain bootloader? If not, will it cause an issue in updating on Kies?)
Remove sim & memory card
Start phone in Download mode
Plug in USB
Open Odin v1.3
Select .tar file as PDA
Select 512.pit file
Re-Partition - Not Ticked
Auto Reboot & F.Reset Time - Ticked
Click Start
Wait for installation to complete and phone to restart
Hopefully i've provided all the info required, but if not, please post or PM me. If anyone could please check my steps above and let me know if i'm doing this correct or not before I go ahead.
Much appreciated
hi there,
as i know, to run a 2.3.3 rom on SGS , we need to flash a new bootloader right?
but what if i wanna roll back to 2.2.1? do i need to do somthing to re-install a bootloader for 2.2.1?
cuz in most tutor of installing a 2.2.1 rom did mention DO NOT touch the "Phone Bootloader Update" option of odin3
thanks.
I have found a method to downgrade successfully and created a new post with the step by step guide
http://forum.xda-developers.com/showthread.php?t=1100906
Sent from my GT-I9000 using Tapatalk