Database Develop

How to install CyanogenMod over GOT

Hello,
i have GOT 2.2, and now i want to install teh latest Cyanogenmod.
However i dont know were to include "update-0.04-10.12.08-cm-6.1.0-Milestone-signed.zip".
In my sd card i have 2 folders:
OpenRecovery
OpenRecovery-CFG
Should i put somewhere inthere the files downloaded?
Or should i delete them, and download another Open Recovery?
Thank you so much for the help!

here => Openrecovery\updates
Then in the OR you have to choose the option apply update.zip
/Edit: did u flash the 2.2.1 kernel first or is this already included in this zip?

kernel is included in the zip
(i update to CM6 from 2.1)
but you can flash 2.2.1 got if you want (i don't know why you should do this, but you can ^^)

When you say flash you mean sbf? Yes I used sbf and then used the update zip and GOT open recovery.
Thus now I should not delete any folder and just copy the new zip file in updates? There are some other files in there, should I delete them?
And then just apply the update zip through the known way when stating phone? And will see there the updates and choose cynam.
Sent from my Milestone using Tapatalk

Anyone please?
As i got really confused!
If i just delete the whole two folders and start from scratch would it be ok?
Or does the system need the Open Recovery Folders?

you can put the zip file into the folder"/OpenRecovery/updates"
then reboot your phone to recovery,choose "update.zip"
after that you can choose "update",find "update-0.04-10.12.08-cm-6.1.0-Milestone-signed.zip"
apply,then reboot.over

OK thanks when i apply the update this comes up:
Reboot System
Console
--- Stock Features---
Nandroid
Root Phone
---GOT Modding Menu---
Launch 2,1 Menu
Launch 2.2.1 Menu
Launch CM6 menu
---- Stock GOT Features Menu---
Miscellaneous
USB Mas Storage mode
Settings Menu
Wipe & Cleaning Menu
Open Recovery loader

ok found it it was in another menu!

So i suppose the same would happen for other ROMs as well?
For example MIUI?

MIUI is the same,but not every rom.
you should watch the notice carefully

and before and after your updating,
wipe is very important.
or mabe you can't pass the M picture

Well, with this Rom, I can't connect to google services.
Gmail is not in my applications and also I can't install it... market cannot load... when I press add account, it just goes to desktop...
Any ideas about what shall I do? Now I have nil contacts...
Sent from my Milestone using Tapatalk

[ROM] (OFFICIAL) [email protected]_2.3.3_v2- Power Menu +franco-kernel+New Boot+ How to Guide

First of all I must say thanks to all those people who's research helped me made my first Custom ROM Based on LG v20g and wanted to share it
ciaox
andy572
doktornotor
stormpack
janitux
tkirton
Thank you all
ROM FEATURES
_____________________________________________________________
ROM Name [email protected]_2.3.3_v2
New Changes in v2
Now Overclock your Stock ROM with franco.Kernel |.v1-PRE.RELEASE2| 2.6.35.10
Now Supports EXT4 but I would suggest using EXT2
Custom boot animation allowed and added android eats apple
Patched Lib SQLite 3 for Better IO speed
HEAP size set to 40
CM7 DSP manager added
stagefright player-disabled
added new tones
app2sd variation included (look in the download section-the first boot will take some time....so dn't be in rush )
Some apps and widget are removed(Can be installed by Flashing the zip file in the download section-This apps will be installed in data/app so that you can uninstall them later.)
Code:
AnalogClockWidget
BookmarksWidget
CalendarWidget
ClockWeatherWidget
ConnectionManagerWidget
DigitalAlarmWidget
DualClockWidget
Facebook
GenieWidget
Gmail
Maps
MemoWidget
MessageWidget
PhotoWidget
thinkdroid
Twitter
VoiceSearch
YouTube
OI File manager added
Rooted
BusyBox installed
Added /etc/init.d scripts support
No Apps2SD (Apps to EXT) To get that Try flashing Darktremor App2SD Make sure your EXT partition is EXT2,
EXT3-is not tested and EXT4 is not supported
to change the ext partition easily chk here
Bash shell support
/system/framework is deodexed
/system/app is deodexed
LG launcher
LG STOCK Keyboard
Zip Aligned apk
flashable with ClockWorkMod and amonRA....
HOW to Flash the ROM [email protected]_2.3.3_v2
_____________________________________________________________
Attention This can only be done in Windows PC
Download all of the file in the download section
Extract Romania V20G.zip to any folder
First connect your Phone through USB(Make sure you have all the USB Driver Installed)
Disable LG Virtual modem in the device manager reminded by Lawful123
Then open LGMDP THUNDER v1.5 (To download it look at the Download section and put it in a folder)
Click on Select Port
check your Phone and click on connect (If it doesn't Show your Phone then Go to Setting > application > development > and check USB Debugging )
Choose your Image Folder(Extracted Romania V20G folder) and all other file will be added automatically
Then un-check Recovery Image If you have CWM recovery (the recovery img in Romania V20G is CWM 3.1.0.0 recovery )
After That you will see a drop-down menu where the default value is None, Select Erase EFS APPS and click ok on the pop up.
Now click on start.......Wait LGMDP will backup your nv2 file(nv2-file includes e.g. you IMEI or MAC-Address..so your phone will not work without this !!! )
after that It will put your phone to emergency mode wait.....till LGMDP finds your phone and start the installing process.
Now Take a cup of Coffee and enjoy till its done
Then It will reboot your phone(if it doesn't reboot automatically then just press the power button) and restore the backed up NV2 file automatically(Do not I mean Do not Cancel this process or your phone will be bricked )
It will reboot(if it doesn't reboot automatically then just press the power button) after the NV2 file restoration is completed.
and your Done with LGMDP!!!!!
Now let the phone start up and configure if you want.
After this stage you can use the official v20G without any customization or root.
If you want Root and other posted features then Switch Off your phone and enter to the recovery and follow the below steps(hold down Home+vol dwn button and press and hold power button until you see the CWM recovery)
Flashing [email protected]_2.3.3_v2 via CWM Recovery....Process
[*]Enter into recovery
[*]and wipe all(wipe data/factory reset)
[*]wipe cache
[*]select mount-storage and format system
[*]install zip from sd card
[*]and flash [email protected]_2.3.3_v2.zip
[*]and enjoy!!!!!!
How to change ROM Easily
Answer is Mik's new-baseband-patch
In past if you wanted to install any Custom ROM after you flashed official 2.3.3, you had to use KDZ tool to go back to Official 2.2 to get the network working.
but now you can easily flash any custom ROM by recovery. and if you do not see network(as you won't) then flash new-baseband-patch and bingo now you have signal....
BTW If you face any GSM or DATA related Issue after flashing this patch then report this to mik not me........
Download Section
_____________________________________________________________
[email protected]_2.3.3_v2(MD5-3EA4E4584105D812B97F7D95A9877C7B)
[email protected]_2.3.3_v2_a2sd(MD5-4C0C208C4E3307332A6B7685A0CE397D)
Romania V20G(MD5-F6887E28209C595CFAF4C1A2B7478CA9)(Multiupload link will be added later)
LGMDP-v1.5.exe
Removed apps for [email protected]_2.3.3_v2.rar
Power Menu MOD with Circular Battery MOD (thanks to PaoloM70 and doktornotor )
Mik's new-baseband-patch
[email protected]_2.3.3_v1.2(MD5 hash-571B9C20C6B3A83634F3C0DDDF368F38
Help and Suggestion will be appreciated
Thank you

Good for you
WOW.. Someone actualy posted instructions, good on you for taking the time to do that.
I think there is something in device manager that has to be disabled before doing the above steps.
I thought is was funny to see a stock rom hit in the 900 in quadrent. Will try the rom tomorrow.

Lawful123 said:
WOW.. Someone actualy posted instructions, good on you for taking the time to do that.
I think there is something in device manager that has to be disabled before doing the above steps.
I thought is was funny to see a stock rom hit in the 900 in quadrent. Will try the rom tomorrow.
Click to expand...
Click to collapse
Thanks for your suggestion but I never disabled it. but I will include in the instruction for safe keeping.

downloading now 1 request plz can u make some themes or themes chooser for ur cfw it will be more awosome

can i use INTERACTIVE DATA2SD with this rom

So what's different from doktornotors version. And is this flashable via Sd card

Hi, what are the differences between this and the one posted in the http://forum.xda-developers.com/showthread.php?t=1140862 ?

han-shinbi said:
Hi, what are the differences between this and the one posted in the http://forum.xda-developers.com/showthread.php?t=1140862 ?
Click to expand...
Click to collapse
It is already written here? "My" ROM is a stock rooted LG v20g with a2sd, no other changes done.

This may sound stupid but why can't you just flash the ROM why all these steps also can you add any other mods after you flash the rom??? Like franco tweaks or ungazes data2sd????
Sent from my LG-P500 using XDA Premium App

This ROM is an official one that's why I won't flash it. LG will never be better than mik, andy or franco. However, I have a question : where can I find the icon's of the settings app from your ROM ? I like them and I want to modify a little mik's ROM to add these icons for myself

dislplin01 said:
This may sound stupid but why can't you just flash the ROM why all these steps
Click to expand...
Click to collapse
Because it uses new baseband. So otherwise you will have no GSM. Answered over and over again.

doktornotor said:
Because it uses new baseband. So otherwise you will have no GSM. Answered over and over again.
Click to expand...
Click to collapse
...or otherwise your phone won't start like in my case

doktornotor said:
Because it uses new baseband. So otherwise you will have no GSM. Answered over and over again.
Click to expand...
Click to collapse
I didn't see it above and have not looked at your roms thread thank you for the answer
Sent from my LG-P500 using XDA Premium App

dark-k said:
This ROM is an official one that's why I won't flash it. LG will never be better than mik, andy or franco. However, I have a question : where can I find the icon's of the settings app from your ROM ? I like them and I want to modify a little mik's ROM to add these icons for myself
Click to expand...
Click to collapse
It's theme. Use Nt-sense CM7 theme.
Sent from my LG-P500 using XDA Premium App

for me its getting restarting every 5 minute!and its very hot! the display and the battery its on fire!!!!and the icons from top bar has inverted...its white...any idea?everytime i try to install something from market its getting restarting.....

mujju85 said:
can i use INTERACTIVE DATA2SD with this rom
Click to expand...
Click to collapse
i think u can use it but i havnt tested it.try using EXT2 partition.

untitledmangxg said:
for me its getting restarting every 5 minute!and its very hot! the display and the battery its on fire!!!!and the icons from top bar has inverted...its white...any idea?everytime i try to install something from market its getting restarting.....
Click to expand...
Click to collapse
try installing this rom by following the guide given in the 1st post.

i have done all steps like in first post....it was fault of interactive data2sd...dont install.....

untitledmangxg said:
i have done all steps like in first post....it was fault of interactive data2sd...dont install.....
Click to expand...
Click to collapse
Then its better to stick to a2sd. Later I will test d2sd and let you guys know if it works.
BTW I am using EXT2 Partition.

@cyber_avijit:
Do you want a private howto on adding powermenu? I'll give you one if u want.

[GUIDE] Installing CM7 nightly, GPS FIX *Update 7/30*, Kernels, and Camera app

For those STILL having GPS problems after trying to fix, go to bottom of post!! Included is a pic of a lock I was getting indoors with 17ft. accuracy.
So i've seen alot of people asking questions constantly about installing CM7, what is required to do so, and how to install all the fixes and different kernels. I'm hoping that by putting this thread up it will help anyone with questions so it will make installation and modification a breeze.
So first... You're going to need to pick up the latest nightly of CyanogenMod 7.
Here is the link to the thread on our forum:
http://forum.xda-developers.com/showthread.php?t=1061889
and here is a direct link to download the latest nightly:
http://download.cyanogenmod.com/?device=vibrantmtd
Currently the latest nightly is #69. (if you are curious to know what is changed in each nightly here is a link to the changelog: http://cm-nightlies.appspot.com/?device=vibrantmtd )
Copy the file to your internal sd card, then reboot into CWM. (If you don't have ClockworkMod installed, go to the market and download ROM Manager, then once installed open the program and install ClockworkMod Recovery for Vibrant MTD.
Once in CWM, just flash the zip file as you normally would anything else (go to Install ZIP from sd card, then choose ZIP and find the file, then hit yes to update)
Once done you should have successfully installed CM7, reboot and wait for the phone to load up.
At this point the install is done, and you can enjoy CM7, but unfortunatly your GPS won't work and battery life will be horrible... so now you must install the fixes.
First, download the Kernel. You can use either Bali-X found here:
http://forum.xda-developers.com/showthread.php?t=1181167
or Glitch, found here:
http://forum.xda-developers.com/showthread.php?t=1041532
For The Glitch Kernel there are 3 different versions. LL, ML, or HL. To be on the safe side HL is usually the most stable for people.
Download whichever kernel you please and also copy that to your phones internal sd card.
Next download the Kernel Cleaning Script, direct link to download here:
http://forum.xda-developers.com/attachment.php?attachmentid=628968&d=1308402560
Now after you've downloaded the kernel you wanted and the cleaning script, your also going to want the GPS fix, direct link to thread below:
http://forum.xda-developers.com/showthread.php?t=1172428
First lets fix the GPS before applying the kernel, here is a quick step by step:
GPS Fix! Update 7/30
Download the GPSFIX2.ZIP file and GPSD.ZIP file located at the bottom of my post (Make sure you unzip the file) and copy it to your SD card
2)Download a root file explorer like Root Explorer (not free) or ES File Explorer (free) in the market. If you use ES File explorer you must do the following to be able to change the system files:
FOR THOSE USING ES FILE EXPLORER
Open up ES File Explorer, in there hit your Menu key, then go to Settings.
Scroll down to till you see "Root Settings".
Under there you will see Root Explorer and Mount File System, check both of them, then hit the back button.
4)Once in the file manager, go to your root directory then go here: (if you know how to use file explorer or ADB you can simply copy the files to the corresponding locations and restart the phone if not keep following)
Go to the GPSFix2 folder on your SD card, then go to /data/gps/ and copy secgps file
Now go to to your phones root directory, and go to /data/gps and paste the secgps file in there
5)Now there are two other files to copy:
Go to the GPSFIX2 folder, then go to /system/bin/ and copy the AGPSD file
Go to the phones root directory and go to /system/bin/ and paste the AGPSD file in that directory
Lastly, go back to the GPSFIX2 folder, and go into /system/etc/ and copy the GPS file
Go to the phones root directory again, and go to /system/etc/ and paste the GPS file in there!
6)Now we need to copy the file from GPSD.ZIP (Make sure to unzip the file!!)
Copy the file from the GPSD folder, into: \system\vendor\bin\ the same way you did the other GPS Fix files.
7)Download AngryGPS file located here: http://forum.xda-developers.com/attachment.php?attachmentid=657133&d=1310879457
8) Install ANGRYGPS.APK, once installed go to your apps and open up AngryGPS. Go to:
Settings - General Settings - Change Operation Mode from MSBASED to STANDALONE. Once done, hit the home key.
As long as you've copied all the files, restart your phone and try things out!
Now your GPS should be working, but we still need to install the new kernel. Hopefully you've downloaded one of the two kernels listed above and copied them to your internal zip folder.
Finally, lets apply the kernel. Hold your power key and hit reboot phone, then a menu will appear, to either reboot or recovery, hit recovery (duh!).
Once in recovery you are going to want to apply the Kernel Cleaner script first. Go to apply update from zip, then choose zip file, then choose the kernel cleaner script... Once you've done that, go to choose zip again, and choose your kernel. DO NOT REBOOT INBETWEEN THIS PROCESS!!!!!
Let the kernel install, once done go ahead and reboot the phone.
If all went well within about 5 minutes your phone should be up and running again.
The last thing your going to need to do is install GAPPS, since CM7 obviously comes with none. You'll notice you have no market.
Here is the latest GAPPS, The zip is a flashable file through ClockWorkMod. Just go into clockwork, and find zip and install it like you did the rom and kernel. Reboot and you will have your market and GApps back.
http://goo-inside.me/gapps/gapps-gb-20110613-signed.zip
OVERCLOCKING AND UNDERVOLTING
You have to follow the instructions for either Glitch or Bali kernel here. SetCPU will NOT work for Glitch, and Voltage Control will NOT work for Bali.
OPTIONAL FOR GLITCH KERNEL (Bali below)
If you want to adjust CPU Voltage AND/OR Clock Frequency you are going to need to download VOLTAGE CONTROL from the Market. It is free as well. Make sure you use Voltage Control. Other cpu programs have been reported to have problems from what i've read.
If you are not sure what you are doing, then ask!
Here is my voltage control settings, this seems to be the best for stability:
Here are my settings in Voltage Control
1300: 1400mv -0mv = 1400
1200: 1350mv -0mv = 1350
1000: 1250mv -25mv = 1225
800: 1200mv -50mv = 1150
400: 1050mv -75mv = 975
200: 950mv -75mv = 875
100: 950mv -100mv = 850
OPTIONAL FOR BALI KERNEL
You must install SetCPU, which is available from the market, but is not free.
You can also download it here directly from for FREE, copy it to your SD Card and install the apk:
http://forum.xda-developers.com/attachment.php?attachmentid=648354&d=1310073004
I'm not sure of good overclocking/undervolt settings on the Bali kernel as I haven't fooled around with it more than to know that it works well with CM7.
**If someone has fooled with it please post up some results so I may put them here for recommendations.**
KNOWN ISSUES
Currently the Glitch V11 has a bug where the keyboard can pop up on random occasions. This will be fixed in V12. It's not a big deal.
Replacement Camera
In my post i've includedthe MIUI Camera APK.
You can just copy the MIUICamera.apk file to your SD card and install it. You will be able to use both the MIUI camera and the stock camera. The only problem is the video recorder of the MIUI camera doesn't record 720p. For that switch to the AOSP camera.
Hopefully taking some time to write this up can help alot of you follow a straight set of instructions instead of having to bounce around and look from topic to topic on what to do.
I'll continue to check on this thread and make sure if anyone has any questions I will try to help and answer them.

jwleonhart said:
So i've seen alot of people asking questions constantly about installing CM7, what is required to do so, and how to install all the fixes and different kernels. I'm hoping that by putting this thread up it will help anyone with questions so it will make installation and modification a breeze.
I'll continue to check on this thread and make sure if anyone has any questions I will try to help and answer them.
Click to expand...
Click to collapse
Thanks,i did flash Glitch HL kernel,and latest nightly,but i have some questions,can i do gps fix later(after flashing kernel),and i found that my cpu`s max is still set on 1000Mhz,like in stock cm7 stock kernel,so is it necessary to change it(for example to 1200Mhz)for better battery life?
And again thanks a lot for posting this,you hepled me greatly and spared a lot of time in searching.

ranse85 said:
Thanks,i did flash Glitch HL kernel,and latest nightly,but i have some questions,can i do gps fix later(after flashing kernel),and i found that my cpu`s max is still set on 1000Mhz,like in stock cm7 stock kernel,so is it necessary to change it(for example to 1200Mhz)for better battery life?
And again thank a lot for posting this,you hepled me greatly and spared a lot of time in searching
Click to expand...
Click to collapse
You can do the GPS fix whenever you please. Just remember that everytime you flash a new nightly of CM7 you're going to have to apply the GPSD file again... Everytime you flash a new nightly it wipes all the old system data, GPSD is unfortunatly one of the casualties.
What program are you using for adjust your CPU frequency? You should be using this:
-Voltage Control : http://forum.xda-developers.com/showthread.php?t=829731
If you want to gain more battery life you shouldn't be increasing to 1.2GHz, that will not help your battery life any.
If anything leave it at the stock 1GHz frequency and apply undervolt to the processor... of course you will have to do some testing because undervolting can cause stability and lockup/reboots.
Here are my undervolt settings, so far no locks-up on this combo for about a week now:
Here are my settings in Voltage Control
1300: 1400mv -0mv = 1400mv
1200: 1350mv -0mv = 1350mv
1000: 1250mv -25mv = 1225mv
800: 1200mv -50mv = 1150mv
400: 1050mv -75mv = 975mv
200: 950mv -75mv = 875mv
100: 950mv -100mv = 850mv
Im running High Leak, using this daily at 1300mhz no problems yet... Running a good movie on your phone, like an mkv file will really let you know if your settings are stable.. I've found undervolting anything over the stock freq. doesn't seem to be stable.
Does this help you any??

if i flash a custom kernel, bali for example, i need to do something else to flash a new version of cm7?
thanks

No, you can install a kernel on whatever nightly of CM7 you want. It's just best to have the latest nightly. I do remember hearing some of the earlier nightlys of CM7 like lower 30's were having trouble with different kernels...
Just remember that if you flash a new nightly you will have to fix the GPS and Kernel again though.
Everytime you update to a new nightly it deletes everything unfortunatly.

jwleonhart said:
No, you can install a kernel on whatever nightly of CM7 you want. It's just best to have the latest nightly. I do remember hearing some of the earlier nightlys of CM7 like lower 30's were having trouble with different kernels...
Just remember that if you flash a new nightly you will have to fix the GPS and Kernel again though.
Everytime you update to a new nightly it deletes everything unfortunatly.
Click to expand...
Click to collapse
ok! thanks for the fast reply

thanks for doing this!
quick question, when I try deleting the old GPSD file in order to move the new one it says I can not delete the file, then when I try to overwrite it, ES file explorer says I can not move the GPSD file. How exactly am I supposed to replace the old file with the new? I already have angry GPS installed and I also have installed the bali kernel. I've heard good things about bali and battery life so Im hoping it helps out, cause I've always had bad experience with battery life unless I shut off data. Any suggestions for good settings to use for bali?

cmrn89 said:
thanks for doing this!
quick question, when I try deleting the old GPSD file in order to move the new one it says I can not delete the file, then when I try to overwrite it, ES file explorer says I can not move the GPSD file. How exactly am I supposed to replace the old file with the new? I already have angry GPS installed and I also have installed the bali kernel. I've heard good things about bali and battery life so Im hoping it helps out, cause I've always had bad experience with battery life unless I shut off data. Any suggestions for good settings to use for bali?
Click to expand...
Click to collapse
i had this problem when i was using a es explorer downloaded from internet, and not from market. if you got it from internet, try removing it, and get it from market

infestedd said:
i had this problem when i was using a es explorer downloaded from internet, and not from market. if you got it from internet, try removing it, and get it from market
Click to expand...
Click to collapse
alright I just tried uninstalling/reinstalling es file explorer and the same thing is happening, any other suggestions?

Should I take any extra steps, if I want to odin back to UVJFD from CM7?

cmrn89 said:
alright I just tried uninstalling/reinstalling es file explorer and the same thing is happening, any other suggestions?
Click to expand...
Click to collapse
In settings select "mount file system".

Make sure its in write mode not just read only mode.
Sent from my SGH-T959 using XDA App

I Dl'd the angrygps.apk, installed it, but its not showing up in my app drawer...any ideas why?
Sent from my SGH-T959 using XDA App

Ok regarding ES FILE EXPLORER....
I'm going to update my first post as well, but here is what you must do.
Open up ES File Explorer, in there hit your Menu key, then go to Settings.
Scroll down to till you see "Root Settings".
Under there you will see Root Explorer and Mount File System, check both of them.
Now you can go ahead and write to the system files... Before they were read only which was why you couldn't touch them.

devine might said:
Should I take any extra steps, if I want to odin back to UVJFD from CM7?
Click to expand...
Click to collapse
If you want to go back to the stock rom just odin back to stock. It will erase all the old settings.....

david_rowe said:
I Dl'd the angrygps.apk, installed it, but its not showing up in my app drawer...any ideas why?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Can anyone else confirm it won't show up in the app drawer? Works perfectly fine for me, and to others who I have helped with this.....
EDIT:
Do me a favor, see if its actually installed. Go to Menu, Manage Apps, then see if AngryGPS is on the list under downloaded.

jwleonhart said:
Ok regarding ES FILE EXPLORER....
I'm going to update my first post as well, but here is what you must do.
Open up ES File Explorer, in there hit your Menu key, then go to Settings.
Scroll down to till you see "Root Settings".
Under there you will see Root Explorer and Mount File System, check both of them.
Now you can go ahead and write to the system files... Before they were read only which was why you couldn't touch them.
Click to expand...
Click to collapse
thanks finally was able to do it. and angry gps worked fine for me

awesome guide!
You should add the permissions to GPSD file to the guide. It does't work with the default permissions.

already did lol. I'm updating as I go. Just put up latest GAPPS also.

jwleonhart said:
Can anyone else confirm it won't show up in the app drawer? Works perfectly fine for me, and to others who I have helped with this.....
EDIT:
Do me a favor, see if its actually installed. Go to Menu, Manage Apps, then see if AngryGPS is on the list under downloaded.
Click to expand...
Click to collapse
Yeah I know its installed but I can't open the application
Sent from my SGH-T959 using XDA App

[NAND][NANDROID] ATTISOID first release [29.2.2012]

Hi Guys! I finally can release my first customized themed ROM from SP3DV build! This is my daily use ROM and think it is so good to share it.
I'd prefer to shared the NANDROID (backup restore) but maybe upload the usual installing .zip file in next days. The major advantages of this rom is that it can boot with SD CARD inserted (It work for me and hope to work with any SD CARD type). Also use an app (tasker) that prevents rebooting after any missed call.
FEATURES:
- Based on CyanogenMod 7.1 Android 2.3.7
- This is a MOTO BLUR themed rom. (I don't use the BLURHOME launcher becouse it is so heavy for X1. Instead I use a blur theme for Great GO LAUNCHER EX)
- Changed Bootanimation with a 3D CYANOGENMOD7.
- JAVA enabled (For installing .jar files).
- New WALLPAPERS.
- 3 new AOSP themes Added (MOTOBLUR, ANASTASDROID, ROVER BLACK).
- Customized framework-res.apk.
- US text-to-speech (tts) Added.
- Changed the default FONT with the CHINT font.
- used the last Zargloub's kernel (gf111062 - 28.2.2012).
- CPU Max and Min frequency customized (128~614MHZ).
ADDED:
- Go launcher ex with BLUR theme, Go locker, Go locker themes, Go taskmanager, Go weather.
- Gauge battery widget.
- X-plore.
- Smart keyboard pro.
- Multitasking pro (With long press of home key it appears).
- Ucbrowser and Ucxunlei (a great chinese downloading app).
- Audio effect.
- TASKER (A good replacement of chinese Newding) [Great Thanks to BORKISHA and other guys that introduce it].
REMOVED:
- Stoke Android Keyboard.
- Old CMWALLPAPERS.
- CM7 old themes.
- Newding
BUGS:
THIS ROM IS UNROOT! So there are some bugs like wifi problems!
IF YOU DONT HAVE THE CLOCKWORKMOD recovery flashed to your XPERIA X1, please see the link blow till flashing CLOCKWORKMOD recovery. [thanks to Kerfooly]
http://forum.xda-developers.com/showthread.php?t=1329379
HOW TO INSTALL:
1- Download the .7z file from the provided link.
2- Extract it and put the folder clockworkmod in the root of your SD CARD.
3- Reboot in recovery and choose backup and restore.
4- select restore.
5- select the date-time provided. then select yes-restore.
6- reboot and enjoy without need to eject your SD CARD when booting!
7- After that ANDROID boots, launch the TASKER app and select your ringtone and SMS notification from your SD CARD!
Special Thanks to:
- SP3DEV
- Sun Dream
- Kerfooly
- Zargloub
- jerrytan93
Download link:
*** Link removed due to unlicensed paid software included in this release ***
-DM

IMPORTANT NOTE:
There are not something special in that build! just can find a way to prevent SD CARD checking while boot! I find that if the build be unroot it can't stuck while boot! I try 4zroot for unroot but it can't reroot! When the build be unroot some bugs appear! If the unroot-reroot problem solves, can say that the SD CARD problem finally can be solved!

first one unbelivable it really works with sdcard inserted nice job attisa!!!!
my simcard can't get detected with this rom

wow...really this build can used daily ??

Thanks for your rom
Do you have Install zip for it
because I need to add my files specially my ringtones
thanks again

mahmoodifar said:
Thanks for your rom
Do you have Install zip for it
because I need to add my files specially my ringtones
thanks again
Click to expand...
Click to collapse
I'd post the installer .zip file in some next days! But for now you can modify the TASKER app to use your ringtone! because this app use the SD CARD ringtones to prevent reboot when phone rings!

Elibl said:
first one unbelivable it really works with sdcard inserted nice job attiso!!!!
my simcard can't get detected with this rom
Click to expand...
Click to collapse
I have no idea why your simcard can't detected. Did you try reboot or replacing the simcard?! I think you do it! Hope that the .zip file don't have this problem!

Hi, thanks for this. I've just installed it. Whats wrong with wifi? its showing an "error" message and its not finding any network. Also, are GAPPS included ?

Could you tell us what did you do to fix SDcard problem to fix another roms because I really like IceDroid
Thanks

mahmoodifar said:
Could you tell us what did you do to fix SDcard problem to fix another roms because I really like IceDroid
Thanks
Click to expand...
Click to collapse
The simplest way is that use 4zroot.apk for unroot-reroot the device!

attisa said:
The simplest way is that use 4zroot.apk for unroot-reroot the device!
Click to expand...
Click to collapse
thanks a lot! and what's the reason for the boot problem? do you know it?

attisa said:
The simplest way is that use 4zroot.apk for unroot-reroot the device!
Click to expand...
Click to collapse
So, just load it up, click unroot then reboot, then run again and chose reroot?

for me it gives force closes and system is totally messed after unroot and i'm not able to reroot...
but boot works with sdcard inserted...

Just like me
Wifi doesn't work anymore

what kind of crap you posted attisa didn't you tried it before?
but solution is near...
wifi is also messed up for me...
EDIT: oh ok i understand this is the mod you did to the rom but i prefer to remove sdcard than to have no su rights and no wifi
but pretty good the solution is near
you only should mentioned the problems more clearly and earlier...

I think all of these problems are as result of shell rooting
If there is a way to could full root the NAND roms, all problems will gone (missed call reboot, SDcard, wifi, ...)

If it ok I share tasker and it's settings
What are the Phone Offhook and Phone Idle ?

Sorry OP, but i have to close this. Next time, do not include paid software in your release..

Add native android SIP stack for Wifi & 3G calls in ICS - Galaxy Note-GT-N7000

This is just to help people like me that use their mobile for internet calls. As you know, it is disabled in GNote ICS and the old method here http://forum.xda-developers.com/showthread.php?t=1109962 does not work for ICS ROMs.
TESTED ON
LPY
LPF
LP8
LP9
LQ2
LQ3
Kingdroid 2.0
Kingdroid 2.1
Kingdroid 3.0
GNote i717 Team Perfection ICS (UCLE2)
Criskelo V7
MIGHT WORK FOR YOUR ROM IS THE SIZE OF YOUR framework-res.apk IS: Size: 18.7 MB (19,623,222 bytes), Size on disk: 18.7 MB (19,623,936 bytes)---checked under windows.
I will attach a modified framework-res.apk for GNote ICS ROM and the Internet call settings menu file.
Just a little changelog of what the modified framework-res.apk can do
Enables internet call (Wifi & 3G)
Enables all orientations (your phone rotates all round)
Rotating Lockscreen (Landscape + Portrait)
Screen stays off on USB/Charger disconnect
Just download one of the .zip files below extract and copy android.software.sip.voip.xml (its in this folder \system\etc\permissions) file to /etc/permissions using ES file explorer, Root explorer or any root browsing app. You can also push this file via ADB but you must be rooted in order to do any of these. After copy framework-res.apk (its in this folder \system\framework) to /system/framework, you can also push this. Your phone will freeze and quickly reboot, if not reboot manually but give it enough time to copy the files.
You should have internet calling now and all the other extras.
NOTE: Always backup incase something goes wrong, I am not to be held responsible for any bricks.
However, if anything goes wrong, just push back Stock framework-res.apk or if not reflash Non-wipe ICS ROM.
This framework-res.apk is specifically tested on the GNote ICS ROMs listed above, use it in any other ROM at your own risk.
--------------------------EASIER STEP FOR NON-ROOTED ROMS--------------------------
To simplify these steps, I have made a flashable zip. Download one of the .zip files and put it in your sdcard (external)---Do not extract pls.
Boot into recovery (Vol up + Power button + Home button all together)
-------ALREADY HAVE CWM DO THIS-------
Scroll down to 'Install zip from sdcard'
Then 'Select zip from Internal/External sd'
Find the zip where you saved it and select it
Select Yes to install.
NOTE: CWM uses Vol up & down to scroll and Home button to select
----------STOCK RECOVERY DO THIS---------
Download CWM Touch
Copy to External sdcard
Boot into recovery
Scroll down to 'Apply update from external sdcard'
Locate CWM and select it
Select Yes to install
CWM Touch will load automatically
Click 'Install zip from sdcard'
Click 'Select zip from Internal/External sd'
Locate the zip where you saved it scrolling with your finger or with volume button
Click on it and select yes to install.
NOTE: Stock recovery uses volume up & down to scroll and Power button to select while CWM Touch uses hand + Vol up & down for scrolling and Touch and Home button to select.
When all is done, go back and select Reboot system.
If you have any questions post it here.
THERE ARE FOUR DIFFERENT WAYS TO GET THIS DONE
1. Copy using root explorer
2. Push using ADB
3. Install using CWM Touch temporary
4. Install using CWM kernel installed on your phone.
FOR STEP
1. You must have root and root explorer app, just download the file, extract and copy each to their respective directories (refer to the step above).
2. Push the two files using ADB but you need root in order to do this.
3. Install temporary CWM Touch via stock recovery and flash the zip. This does not install CWM in your phone, it disappears as soon as you reboot.
4. Install CWM kernel for your ROM and use it to flash the zip.
DOWNLOADS
framework-res.apk----------> SIP + Orientation Mods for Copy or Push
SIP xml file---------> android.software.sip.voip.zip, for Copy or Push
Enable SIP + Other Mods----------> SIP + Orientation Mods for CWM
Enable SIP only with this----------> SIP Only for CWM
Stock framework-res.apk----------> Stock in case you want to revert back.
KingDroid-2.0---------> Enable SIP in KingDroid 2.0 ROM
KingDroid-2.0-REVERT ----------> Revert back in case of issues 2.0
KingDroid-2.1----------> Enable SIP + CRT effects in KingDroid 2.1 ROM
KingDroid-2.1-REVERT----------> Revert back in case of issues 2.1
Kingdroid-3.0----------> Enable SIP in KingDroid 3.0 ROM
GNote-i717-Team Perfection ICS (UCLE2)----------> Enable SIP in GNote-i717-Team Perfection ICS (UCLE2) ROM
Criskelo-V7----------> Enable SIP in Criskelo-V7 ROM
If this worked for you in another ROM just post it here so others will have confidence in flashing it.

Can you do the same for Indian ics version?
Edit: This framework works on ddlp8, it also changes swipe lock to default ics lock.
With this the device SOS going to deep sleep
Can someone on lpy check if device goes into deep sleep after setting voip?

jaskiratsingh said:
Can you do the same for Indian ics version?
Edit: This framework works on ddlp8, it also changes swipe lock to default ics lock.
With this the device SOS going to deep sleep
Can someone on lpy check if device goes into deep sleep after setting voip?
Click to expand...
Click to collapse
I ll need your framework-res.apk

mrcasmir said:
And others I have not noticed yet
Click to expand...
Click to collapse
What are the others changes?
I ask that because I don't like install something on my phones without have all the informations/changelog.

tdomikael said:
What are the others changes?
I ask that because I don't like install something on my phones without have all the informations/changelog.
Click to expand...
Click to collapse
Well there are other options I changed from false to true and vise versa and then changed it from Phone device to Tablet device. I noticed most changes in the dialogue boxes and graphical interface.
Well its your call, if you want it then go for it.

So, if I understand, after apply your modifications, my phone will most look like tablet device than phone device?
There is no performance or battery changement (no bad surprise with anormal drain battery ou low performance), but just appearance modification.
I'm right?
And an other question : Is there possibility to just add native SIP in ICS, without apply others modifications?
PS : apologise for my english

tdomikael said:
So, if I understand, after apply your modifications, my phone will most look like tablet device than phone device?
There is no performance or battery changement (no bad surprise with anormal drain battery ou low performance), but just appearance modification.
I'm right?
And an other question : Is there possibility to just add native SIP in ICS, without apply others modifications?
PS : apologise for my english
Click to expand...
Click to collapse
You sound so scared, well I will add SIP only version in a few minutes. Just check back in 10

mrcasmir said:
You sound so scared
Click to expand...
Click to collapse
scared? Not really, I just like understand what I do. I think it's the best thing to do for progress.
For example, after read your post, I know that is possible to change option. So I actually trying know how to change the false/true options. I don't know where find the files where they are, and after how to open, look and try to understand them.
I'm "noob", so I think it will take me a long time!
mrcasmir said:
well I will add SIP only version
Click to expand...
Click to collapse
Thanks a lot!!

mrcasmir said:
I ll need your framework-res.apk
Click to expand...
Click to collapse
DDLP8 framework is uploaded at the below location:
http://www.multiupload.nl/XY6SR86687

jaskiratsingh said:
DDLP8 framework is uploaded at the below location:
http://www.multiupload.nl/XY6SR86687
Click to expand...
Click to collapse
Have just compared the two files, there are thesame. Just go ahead and install this one they use thesame framework-res.apk

tdomikael said:
scared? Not really, I just like understand what I do. I think it's the best thing to do for progress.
For example, after read your post, I know that is possible to change option. So I actually trying know how to change the false/true options. I don't know where find the files where they are, and after how to open, look and try to understand them.
I'm "noob", so I think it will take me a long time!
Thanks a lot!!
Click to expand...
Click to collapse
Here is the SIP only version https://rapidshare.com/files/3975298779/SIP-only-ICS-LPY.zip
Just flash via recovery, follow the guide above

Thanks a lot!!
Edit : Working perfectly

Tested with poivy.com account, no problems!
I also figured to enable the "Ask for every call" option in order to use the sip voip with the dialer XD

mrcasmir said:
Enables internet call (Wifi & 3G)
Enables all orientations (your phone rotates all round)
Rotating Lockscreen (Landscape + Portrait)
Screen stays off on USB/Charger disconnect
Tablet like dialogue boxes
Click to expand...
Click to collapse
How did you enable 4 way Rotation ?

mrcasmir said:
Have just compared the two files, there are thesame. Just go ahead and install this one they use thesame framework-res.apk
Click to expand...
Click to collapse
Thanks. Will use it
Sent from my GT-N7000 using XDA

Thanks! :thumbup: it's ok on the Kingdroid 2.0 fantastic!
Inviato dal mio GT-N7000 con Tapatalk 2

Can we configure SKYPE and use the native android SIP to make calls via SKYPE? i hate opening Skype every time i want to make Skype call to india from here..

sharan.mu said:
Can we configure SKYPE and use the native android SIP to make calls via SKYPE? i hate opening Skype every time i want to make Skype call to india from here..
Click to expand...
Click to collapse
Sorry, Skype is not supported.

Works great very positive feedback

Confirmed, this mod is also working on LQ2 firmware without any issues.
Sent from my GT-N7000 using Tapatalk 2