While attempting to find if my product code had changed when inputting the "number" into the dialer, My Pcode said NOT ACTIVE. Instead of I9000.....
And so i tried to restore the UK product code with XEU, but not look still says.
Pcode: NOTACTIVE
Any help would be appreciated
Thanks
Dan
*bump*
i have the same problem
same problem.
some help?
I have the same problem.. going crazy.
Suggestions ?
Hi all,
I recently bought my phone (no provider, it was SIM Lock free), after entering the magic digit combinations i got the following.
*2767*4387264636#
SELLOUT SMS
[1]Sellout SMS: OFF
[2]PCode:Not Active
[3]Moderod
*#1234#
PDA:I9000XFJS2
Phone:I9000XXJPY
CSC:I9000XFJS3
Built info:2011.01.
The problem is how can I activate my Pcode? When I connect to PC, and I'm using Kies, it's written "This device ca not be updated". This phone was not rooted, I did factory hard reset, but the problem wa the same.
Any suggestions? THX
Related
Hi guys,
My phone is Galaxy S unlocked/unbranded. Bought it from a cellphones store.
Now, after pressing *#1234# I got this:
PDA: I9000DXJF4
Phone: unknown
CSC: I9000OLBJF4
My Phone is "unknown"! Is that normal?
Then, after I pressed *#272*<hh><mm>#, I got:
Sales Code: XSE (Indonesia code, I live in Indonesia)
and a list of three digit codes and two buttons: INSTALL and CANCEL
Is that normal? Do I have to press INSTALL to make my phone "known"?
I'm suspecting that this "unknown" phone type has relation with Kies now being unable to detect my phone. But, actually Kies was able to detect my phone after installation (on Win 7 64-bit) and ran for the first time.
Thanks for any help.
Hello,
I've a Galaxy-S, that I bought in UK from a T-Mobile guy. The phone was working perfectly in uk , I was using it on T-Mobile and everything was just great.
I even updated to Froyo using the Kies regedit trick.
Now I'm back in Italy. I inserted my SIM and everything works well, except for 3and data. I can only use WIFI. For the rest I can make calls, send sms and so on. I don't know why this is happening. If it was locked the telephone wouldn't start with the Italian sim at all.
By the way, I tried to get the unlock code using ADB, unsuccesfully anyway.
What do you suggest?
I forgot to mention:
PDA: I9000XXJPO
PHONE: I9000XXJPP
CSC: I9000OXAJPO
build info: 2010.10
Go to settings, under mobile networks enter the APN settings for your carrier. You can probably find it one the web somewhere.
I have strange problem. I can't connect to any 2g/3g network. My SGS is all the time in Airplane mode and in phone info menu I see "radio disabled". When I query the version info I get:
PDA: I9000XXJP2
Phone: Unknown
CSC: I9000OXAJP2
I'm most conserned about this Phone: Unknown. It had only proper value just after the phone was flashed. After phone turn off turn on it changed to this strange Phone: Unknown and I can't connect to any network (tried 3 differend SIM cards). Can anyone help me?
squider said:
I have strange problem. I can't connect to any 2g/3g network. My SGS is all the time in Airplane mode and in phone info menu I see "radio disabled". When I query the version info I get:
PDA: I9000XXJP2
Phone: Unknown
CSC: I9000OXAJP2
I'm most conserned about this Phone: Unknown. It had only proper value just after the phone was flashed. After phone turn off turn on it changed to this strange Phone: Unknown and I can't connect to any network (tried 3 differend SIM cards). Can anyone help me?
Click to expand...
Click to collapse
did u check apn?pm me on yahoo messange dharm_sinojiya will try something which solve yr problem
aadis said:
did u check apn?pm me on yahoo messange dharm_sinojiya will try something which solve yr problem
Click to expand...
Click to collapse
I can't access "Mobile networks" menu. It is dimmed. When I enter "Call settings->Voice calls" it says "Network or SIM card error". Another interesting thing is that when I try to check the IMEI (*#06#) it does not show the numer only "IMEI: "
squider said:
I can't access "Mobile networks" menu. It is dimmed. When I enter "Call settings->Voice calls" it says "Network or SIM card error". Another interesting thing is that when I try to check the IMEI (*#06#) it does not show the numer only "IMEI: "
Click to expand...
Click to collapse
im online on yahoo massanger if you like you can chat with me ,lets try something,may be it will fix your problem
aadis said:
im online on yahoo massanger if you like you can chat with me ,lets try something,may be it will fix your problem
Click to expand...
Click to collapse
Unfortunately I'm currently at work and I can't use yahoo massanger
squider said:
Unfortunately I'm currently at work and I can't use yahoo massanger
Click to expand...
Click to collapse
good luck,try to flash with other rom stock,and try your sim and then see and let me know its work or not,hope it will work good
You forgot to flash a modem hence you have.no radio.
Either flash a modem or you can flash a full firmware to.correct the problem.
Sent from my GT-I9000 using XDA App
you can flash with odin again the full firmware with the 3 tar files(pda,csc,modem) and the pit file and everithing will be ok
There is small progress. I flashed the 2.3.2 rom and now I can check IMEI. I was also asked for SIM PIN code and I can see SIM APs so SIM card seams to work, but still can't connect to any network :/
EDIT:
Problem solved I had selected invalid KOR CSC. After switching to XEO everyting works perfectly Thanks for help anyway. This forum rox
Can anyone help i have upgraded my phone after much trouble trying to unlock it via market apps & superoneclick neither worked and the phone ended up going into some dead mode and wouldnt fully load up.
So in still trying to end up with a network unlocked phone i have managed to upgrade my phone to GINGERBREAD.XXJVQ 2.3.4 which was successful and work perfectly over my broadband wireless network but when i try to make calls it tell me
"MOBILE NETWORK NOT AVAILABLE"
the mobile was previously on three uk network but is now debranded obviously with gingerbread
i tried a hard reset via *2767*3855* but still no change.
any help greatly appreciated many thanks in advance
Ged
Just look like your phone have been locked on three network.and your unlock is failed.
Did you try found any phone shop on market to unlock your phone?
probably just five pound for each one on Chinatown.
I was stay in UK for 3 year,and as I know, the Chinatown guys have special device for unlock phone ,one simply for all,whatever you upgrade rom,you will be never locked again.
I'm not sure about that really cause it also does this with my correct network sim card still installed......
You've checked your apn settings? Sounds top suspect to me.
If you've still got problems, flash ezbase gingerbread. Search dev section, full, simple instructions included.
I tried that it tells me i should
"insert a sim card to access network services"
Could you point me in the right direction so i know im using the right programs and files
Please check your IMEI number by dialing *#06# on the keypad. If it displays the correct imei number as displayed on the Phone box/ under the battery, then you are saved. If not you have lost your efs folder which contains the files which hold the imei data.
Did u get the phone with Gingerbread as stock rom? Try downgrading to an Eclair (2.1) ROM with Odin.
hello again peoples,
I'm very grateful for all your assistance but i just wasn't paying attention when i was putting my SIM card into my phone and put it in the wrong way round...!
i mean what happened to SIM card slots where sim cards only fit in one way...!
again thanks alot for all your assistance also i've ended up upgrading to Insanity 2.3.5
Thank s
Hello I just got a SIII Mini GT-I8190 From a friend who told me that it doens't accept sim cards.
Phone bought in greece and it's factory unlocked>
Thing is that Phone accepts sim cards(asking for pin code) but then it wont(?) Register to any network.
When it starts is says Emergancy call only and after a while it says nothing.
Imei is the same as in the backside sticker.
I Installed Cwm,rooted and installed that file http://d-h.st/oNG
From here http://forum.xda-developers.com/showthread.php?t=2526831
But didn't see any fix.
When i press *#1234# i take these:
AP :I8190XXANC2
CP :I8190XXANC2
CSC :I8190EURANC1
I suspect that is hardware related problem, but it would be nice if i could make all the moves so i know that it's hardware related and not software.
Btw Device is on official 4.1.2 firmware.
Any Help would be appreciated
Also let me know if u want any other infos and sorry for my bad english.
Regards