After I replaced the framework-res.apk(modofied) in my phone, my phone restarted auto and still can not enter the system, the screen stuck in the 'X' screen, how could I recover the original framework-res.apk to my phone (I have backup the original one ) ?
pls help,help.......
Umm, boot into recovery and copy it over with ADB...
adb push your backed up framework file as soon as you see the boot animation.
if you don't have it get it from your ROM zip.
may be easier to nandroid restore if you have a recent backup.
adb show "device not found", how could I do?
Like I said, do it in recovery mode.
Are you in a command prompt from within you android ask folder.
E.g c:\ANDROIDSDK\tools
Then open a command prompt from that folder tree.
Then try adb devices
Sent from my Nexus One using XDA App
evilkorn said:
Like I said, do it in recovery mode.
Click to expand...
Click to collapse
Sorry,you mean that I should in the recovery mode, then link to my PC,then run the adb order ? my recpvery version is 3e, is it ok ?
lisalasu said:
adb show "device not found", how could I do?
Click to expand...
Click to collapse
adb logcat , should wait till adb is available. If it never shows a log then recovery/nandroid will be the only way.
britoso said:
adb logcat , should wait till adb is available. If it never shows a log then recovery/nandroid will be the only way.
Click to expand...
Click to collapse
Thought I fail to adb now, anyway,tks all for help
Related
I recently purchased an LG Phoenix by At&t, the problem I have is that I cannot leave ClockworkMod Recovery v5.0.2.0
I rooted it, restarted in recovery. and everything worked fine. I then upgraded my firmware, not sure what version though.. I backed up my phone before I upgraded into the new firmware. I then backedup my phone because it rebooted into recovery. Now everytime it boots it goes straight to Clockwork and I cant get out of it. I restored to my previous restore and it still doesn't work. What could I do? Should I install cwr 3? I read that cwr 5 has bugs and is known to brick phones..
Edit: Also the phone without the sd card still boots into clockworkmod menu
I have a ROM(Phoenix ULTIMATE) I'd like to flash but I'm not sure if I should right now considering I'm stuck at this menu.
Info- in my restores It says;
2011-10-04.21.37.48/
2011-10-04.21.56.13/
I'v tried both.
Another edit with potentially important info getting an error stating;
E: bad boot message "recovery"
Sorry If this is a n00b post.. I'm in sort of a rush because I'm moving in a few hours!
Edit; tried flashing the phoenix, didnt work.
installation was aborted
said i needed to switch to Edify scripting, and amend scripting is no longer supported.
What could I flash too to fix this, please help. I don't care if I lose data. Just need my phone back soon.
I have android SDK.
I was reading up on http://developer.android.com/guide/developing/tools/adb.html and http://forum.xda-developers.com/showthread.php?t=517874 here
Would I be-able to push somesort of boot file or firmware to my phone? Or something in that manner?
THIS:
fastboot erase boot
fastboot erase recovery
fastboot flash system system.img
fastboot flash boot boot.img
fastboot flash userdata data.img
fastboot flash recovery recovery.img
fastboot reboot
Seems to be perfect for what I should try, where could I get the stock imgs for my phone? (p505)
I moved this here temporarily for you to be assisted...after that it will be moved beck to the right forum
Good luck!!
M_T_M said:
I moved this here temporarily for you to be assisted...after that it will be moved beck to the right forum
Good luck!!
Click to expand...
Click to collapse
thanks
Really hope I can get this fixed soon.
Xery said:
I recently purchased an LG Phoenix by At&t, the problem I have is that I cannot leave ClockworkMod Recovery v5.0.2.0
I rooted it, restarted in recovery. and everything worked fine. I then upgraded my firmware, not sure what version though.. I backed up my phone before I upgraded into the new firmware. I then backedup my phone because it rebooted into recovery. Now everytime it boots it goes straight to Clockwork and I cant get out of it. I restored to my previous restore and it still doesn't work. What could I do? Should I install cwr 3? I read that cwr 5 has bugs and is known to brick phones..
Edit: Also the phone without the sd card still boots into clockworkmod menu
I have a ROM(Phoenix ULTIMATE) I'd like to flash but I'm not sure if I should right now considering I'm stuck at this menu.
Info- in my restores It says;
2011-10-04.21.37.48/
2011-10-04.21.56.13/
I'v tried both.
Another edit with potentially important info getting an error stating;
E: bad boot message "recovery"
Sorry If this is a n00b post.. I'm in sort of a rush because I'm moving in a few hours!
Click to expand...
Click to collapse
Are you on Ecliar , Froyo or Gingerbread ? Sorry , I don't know much but I would like to help
Forever living in my Galaxy Ace using XDA App
EmoBoiix3 said:
Are you on Ecliar , Froyo or Gingerbread ? Sorry , I don't know much but I would like to help
Forever living in my Galaxy Ace using XDA App
Click to expand...
Click to collapse
I didn't change anything, everything is stock I got it yesterday. Rooted it today and it's stuck in recovery. So I guess whatever stock is..
Xery said:
I didn't change anything, everything is stock I got it yesterday. Rooted it today and it's stuck in recovery. So I guess whatever stock is..
Click to expand...
Click to collapse
Try adb .
(If you know what it is)
Type these in:
adb shell
su
reboot bootloader
See if it works
Forever living in my Galaxy Ace using XDA App
I don't know what adb is. :c
Could you explain a bit more about it?
Xery said:
I don't know what adb is. :c
Could you explain a bit more about it?
Click to expand...
Click to collapse
Okay then .
Download and install the Android SDK Tools first
Forever living in my Galaxy Ace using XDA App
EmoBoiix3 said:
Okay then .
Download and install the Android SDK Tools first
Forever living in my Galaxy Ace using XDA App
Click to expand...
Click to collapse
OH Android SDK I have that, just updating.. another 30 minutes..
While we wait, could you explain to me what I'd do with it, and just some tips or things I could do?
Xery said:
OH Android SDK I have that, just updating.. another 30 minutes..
While we wait, could you explain to me what I'd do with it, and just some tips or things I could do?
Click to expand...
Click to collapse
If you have platform-tools , everything will be done in a flash
Forever living in my Galaxy Ace using XDA App
EmoBoiix3 said:
If you have platform-tools , everything will be done in a flash
Forever living in my Galaxy Ace using XDA App
Click to expand...
Click to collapse
"Installed Android SDK Platform-tools, revision 7"
Still installing a bunch of other things though..
"Downloading SDK Platform Android 3.2, API 13, revision 1"
Probably won't be done till tomorrow, horrible internet.
Xery said:
"Installed Android SDK Platform-tools, revision 7"
Still installing a bunch of other things though..
"Downloading SDK Platform Android 3.2, API 13, revision 1"
Probably won't be done till tomorrow, horrible internet.
Click to expand...
Click to collapse
All you need now is platform-tools . The rest can be cancelled .
Use cmd (best if used with administrative rights) to navigate to the Android SDK folder , then to platform-tools .
Once you get there , connect your phone through USB then don't touch it .
In cmd , type:
abd shell
su
reboot bootloader
Forever living in my Galaxy Ace using XDA App
EmoBoiix3 said:
All you need now is platform-tools . The rest can be cancelled .
Use cmd (best if used with administrative rights) to navigate to the Android SDK folder , then to platform-tools .
Once you get there , connect your phone through USB then don't touch it .
In cmd , type:
abd shell
su
reboot bootloader
Forever living in my Galaxy Ace using XDA App
Click to expand...
Click to collapse
How would I use the cmd to navigate to the SDK folder?
I see the cmd, I also see a window called Android SDK and AVD manager, What now?
Xery said:
How would I use the cmd to navigate to the SDK folder?
I see the cmd, I also see a window called Android SDK and AVD manager, What now?
Click to expand...
Click to collapse
Do this
Hold start button and R(on desktop)
Run will open
Type cmd in the box and press enter
A black window will open
CD to sdk dir
E.g.
If u installed sdk in C:\sdk
Then do this
cd C:\sdk\platform-tools
Then this
adb shell
reboot bootloader
cdesai said:
Do this
Hold start button and R(on desktop)
Run will open
Type cmd in the box and press enter
A black window will open
CD to sdk dir
E.g.
If u installed sdk in C:\sdk
Then do this
cd C:\sdk\tools
Then this
adb shell
reboot bootloader
Click to expand...
Click to collapse
Follow his instructions .
Forever living in my Galaxy Ace using XDA App
cdesai said:
Do this
Hold start button and R(on desktop)
Run will open
Type cmd in the box and press enter
A black window will open
CD to sdk dir
E.g.
If u installed sdk in C:\sdk
Then do this
cd C:\sdk\tools
Then this
adb shell
reboot bootloader
Click to expand...
Click to collapse
I opened the cmd, I'm not really suer where I installed SDK but I'm pretty sure it was c:\program files\android\android-sdk\tools
That seemed to work, whenever i type adb shell it says abd is not recognized as an internal or external command, program or batch.
I need more detail because I'm a noob. :/
cdesai said:
Do this
Hold start button and R(on desktop)
Run will open
Type cmd in the box and press enter
A black window will open
CD to sdk dir
E.g.
If u installed sdk in C:\sdk
Then do this
cd C:\sdk\tools
Then this
adb shell
reboot bootloader
Click to expand...
Click to collapse
I opened the cmd, I'm not really suer where I installed SDK but I'm pretty sure it was c:\program files\android\android-sdk\tools
That seemed to work, whenever i type adb shell it says abd is not recognized as an internal or external command, program or batch.
I need more detail because I'm a noob. :/
EDIT: GOTIT! got the dir, i typed adb and it says device not found should i connect my phone correct?
Edit: okay,i did that, it just rebooted my phone and it went back into the CWR.. :c wut now?
Are you able to try and boot into bootloader? Try that. Also, try and flash a new ROM in recovery, test to see if it may be the ROM. Don't be afraid to backup again, you can always access the backups based on date.
-How cruel is the golden rule, when the lives we live are all golden plated-
What's bootloader?
I tried to flash my backups before the firmware update and it didn't work, I also can't find any wp505 roms.. I found a few but they wont help in my situation. Do you know any? My rom is stock as I only rooted and got stuck in cwr.
Thanks!
EDIT: I did do that adb shell, reboot bootloader, didnt work.
Xery said:
What's bootloader?
I tried to flash my backups before the firmware update and it didn't work, I also can't find any wp505 roms.. I found a few but they wont help in my situation. Do you know any? My rom is stock as I only rooted and got stuck in cwr.
Thanks!
Click to expand...
Click to collapse
First off, not to lecture you...but you definitely should look into these kind of things before flashing a ROM.
I haven't looked at the ROMs so I'm not sure. But whatever fancies you, it's just to troubleshoot the problem. The problem itself may actually be the recovery. Do you know how to do logcats in ADB? Try and do a logcat and boot up your device while connected to ADB.
So go "adb logcat". This should show you exactly what your device is doing. When it runs and goes straight to recovery paste all that information into a .txt document and upload it onto xda so others can take a look.
I'll try and help more tomorrow but I have to get some rest. Good luck on getting this fixed.
-How cruel is the golden rule, when the lives we live are all golden plated-
can you help me fix this problem
after wipe all data, cache and anotherthing wipe (it's name very hard to remember ).
I cant use recovery mode, my phone can open fastboot and bootloader, but can't open recovery mode (it's only show a android logo when i press "recovery")
please help me (
I could be wrong, but you should be able to use adb to push a new recovery on to your phone.
Try plugging your phone thru USB cord to your computer to see if you can run any adb commands. If you can I think you should be able to push a new recovery to your phone.
justflikwalk said:
I could be wrong, but you should be able to use adb to push a new recovery on to your phone.
Try plugging your phone thru USB cord to your computer to see if you can run any adb commands. If you can I think you should be able to push a new recovery to your phone.
Click to expand...
Click to collapse
can you show me more, i dont know adb commands, and push new recovery is "recovery clockwork" and "recovery RA". I tried apply them, but it's not work,may be i wrong in some thing, it's the first time i use android phone . throught usb, i have "fastboot usb"
please help me
http://wiki.cyanogenmod.com/wiki/Nexus_One:_Full_Update_Guide
but my phone cant connect with PC, atlthough i installed google usb driver.
i might be wrong but cant you just flash a original ruu, than root and reinstall recovery
#1)Go and download yourself a recovery.img file that is compatible with your device and put the image on the root of your SD card (that means on the main directory and not in a folder)
#2)Make sure you have a terminal emulator application installed from the market on your phone. If you don't...install one now.
#3)Open up your terminal and type in
Code:
su
to gain root access. If you are root the next line should show the
Code:
# symbol
#4)At the next line type in
Code:
flash_image recovery /sdcard/name-of-recovery.img
you will need to replace the code that says name-of-recovery.img with the exact name of the file on your SD card.
#5)Hit enter, wait a few seconds and viola ! you have a recovery again.
Good luck man.
hxq88 said:
but my phone cant connect with PC, atlthough i installed google usb driver.
Click to expand...
Click to collapse
Try the driver from this thread.
It helped me set up my ADB for the N1
http://forum.xda-developers.com/showthread.php?t=613217
#2)Make sure you have a terminal emulator application installed from the market on your phone. If you don't...install one now.
you mean install terminal from android market? my phone stop working in android logo screen, i cant do anything in android OS, include enable debugging?
I need restore my recovery mode, and my prolem is Pc cant see phone
hxq88 said:
#2)Make sure you have a terminal emulator application installed from the market on your phone. If you don't...install one now.
you mean install terminal from android market? my phone stop working in android logo screen, i cant do anything in android OS, include enable debugging?
I need restore my recovery mode, and my prolem is Pc cant see phone
Click to expand...
Click to collapse
Did you have ADB working before? Try using the driver from the link I posted.
Have you tried the passimg method?
baseballfanz said:
Did you have ADB working before? Try using the driver from the link I posted.
Have you tried the passimg method?
Click to expand...
Click to collapse
i typed ADB devices on command prompt, it'show
View attachment 763802
and it's my driver after update from your link
View attachment 763803
what is passimg method, is the way rename room.zip => PASSIMG.zip
You did have debugging turn on correct?
Not sure what else to suggest except the passimg method, worth a shot.
Sent from my Transformer TF101 using Tapatalk
And... if you try to install a stock rom? When starts the HBOOT automatically detect the rom and ask to install. One time you've installed the rom, root & install recovery
I think that work because, It happens to me 1 week ago.
My phone recently lost its ROM, and is now stuck on the 'HTC quietly beautiful screen', i did manage to get it into clock work mode recovery and have a backup of my old rom on a usb, however, when i plug in the USB before starting the phone it doesn't show up, meaning i cannot restore. Please help! Any help or feedback is much appreciated! :good:
When you're in recovery, you have to use the command:
Code:
adb devices
for see your phone.
After use adb command like push or sideload for put a rom into the phone
Guich said:
When you're in recovery, you have to use the command:
Code:
adb devices
for see your phone.
After use adb command like push or sideload for put a rom into the phone
Click to expand...
Click to collapse
Thanks, but how would i do that on a mac?
That's why I have parallels!
I had this problem the other day and I fixed it by going to data/media in recovery and installing an old Rom that was downloaded. I could then restore afterwards.
Sent from the one and only HTC One
Shadow Samurai said:
That's why I have parallels!
I had this problem the other day and I fixed it by going to data/media in recovery and installing an old Rom that was downloaded. I could then restore afterwards.
Sent from the one and only HTC One
Click to expand...
Click to collapse
Yes, but i cannot copy anything to my device, and when i attempt to use adb, it says "error: device not found"
Check the thread in my signature
Sent from my HTC One using xda app-developers app
MacHackz said:
Check the thread in my signature
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
i have tried following your help, but when i type ./adb devices it says
"adb server is out of date. killing...
* daemon started successfully *
List of devices attached
"
it doesn't show the serial code
g4slyness said:
i have tried following your help, but when i type ./adb devices it says
"adb server is out of date. killing...
* daemon started successfully *
List of devices attached
"
it doesn't show the serial code
Click to expand...
Click to collapse
Is it turned on booted into Android, or in recovery?
MacHackz said:
Is it turned on booted into Android, or in recovery?
Click to expand...
Click to collapse
Yes
You have the latest adb binaries installed??
Sent from One with Tapa4 Beta
Guich said:
You have the latest adb binaries installed??
Sent from One with Tapa4 Beta
Click to expand...
Click to collapse
I am not sure what a binary is (HTC One is my first android phone so I'm new) but if it is the recovery mode, i only installed it about a week ago
Do you have the folder containing the adb and fastboot files on your Desktop? And do you have HTC Sync installed? It will load the proper drivers, even though I heard it may not be necessary anyway.
This method worked for me on my Mac. It is very simple using Terminal.
You don't actually have to download the whole SDK, just download the file attached in the threat, which is this http://forum.xda-developers.com/attachment.php?attachmentid=1396782&d=1350078941
Place it on your Desktop, and follow the instructions. After ADB successfully lists your device, move the ROM file to your android folder and use the following command: adb sideload rom.zip of course replacing 'rom.zip' with whatever your rom's name is. You can also use adb push if you want to move your Nandroid backup to your device, but I am not sure where it will be located on the device itself afterwards.
Oh and you should be in TWRP > Advanced > ADB Sideload mode if you want to sideload the ROM. I am not sure how it works on CWM but it should be the same way.
TarekElsakka said:
Do you have the folder containing the adb and fastboot files on your Desktop? And do you have HTC Sync installed? It will load the proper drivers, even though I heard it may not be necessary anyway.
This method worked for me on my Mac. It is very simple using Terminal.
You don't actually have to download the whole SDK, just download the file attached in the threat, which is this http://forum.xda-developers.com/attachment.php?attachmentid=1396782&d=1350078941
Place it on your Desktop, and follow the instructions. After ADB successfully lists your device, move the ROM file to your android folder and use the following command: adb sideload rom.zip of course replacing 'rom.zip' with whatever your rom's name is. You can also use adb push if you want to move your Nandroid backup to your device, but I am not sure where it will be located on the device itself afterwards.
Oh and you should be in TWRP > Advanced > ADB Sideload mode if you want to sideload the ROM. I am not sure how it works on CWM but it should be the same way.
Click to expand...
Click to collapse
Thanks, i have tried this method already and am in Clockworkmod recovery, i don't have TWRP
After rebooting for a cyanogenmod update which failed to install, my phone will not boot into Cyanogenmod - only clockwork.
I have precious data on the phone that I need to extract, mainly pictures.
ADB only recognizes the phone as "offline" and I cannot pull any files from it.
Any suggestions? Thanks a lot guys.
icer22x said:
After rebooting for a cyanogenmod update which failed to install, my phone will not boot into Cyanogenmod - only clockwork.
I have precious data on the phone that I need to extract, mainly pictures.
ADB only recognizes the phone as "offline" and I cannot pull any files from it.
Any suggestions? Thanks a lot guys.
Click to expand...
Click to collapse
did you cleared cache?
When you are trying to use adb your phone is in cwm recovery?
alray said:
did you cleared cache?
When you are trying to use adb your phone is in cwm recovery?
Click to expand...
Click to collapse
Yes I've cleared the cache and rebooted with the same results - just boots back into Recovery Mode.
And yes, when I am using ADB I am in Recovery Mode. I can't get past that.
icer22x said:
Yes I've cleared the cache and rebooted with the same results - just boots back into Recovery Mode.
And yes, when I am using ADB I am in Recovery Mode. I can't get past that.
Click to expand...
Click to collapse
Do you have a nandroid backup on your phone?
Also is all your drivers properly set and updated on your cumputer? Can you post a screenshot of Windows devices manager with the phone info?
Are you using the original usb cable? Some usb cables only have GND and 5V pins (no data). Also be sure to use usb 2.0 and a usb port directly from your motherboard (not in front of your computer) and don't use any usb hub.
Well I got it recognized by ADB now.
What is the file structure like in order to pull files from the phone?
What commands can I use in ADB to pull the main sd directory?
icer22x said:
Yes I've cleared the cache and rebooted with the same results - just boots back into Recovery Mode.
And yes, when I am using ADB I am in Recovery Mode. I can't get past that.
Click to expand...
Click to collapse
oh and when you are in bootloader, is fastboot working?
Code:
fastboot devices
does it says fastboot usb or only fastboot (in red)
I nerver used adb to pull files so idk. Maybe somthing like ''adb pull /sdcard/ C:\something'' ?
maybe you can find here
or use twrp to make a backup of your data, then pull the backup to your computer
alray said:
oh and when you are in bootloader, is fastboot working?
Code:
fastboot devices
does it says fastboot usb or only fastboot (in red)
I nerver used adb to pull files so idk. Maybe somthing like ''adb pull /sdcard/ C:\something'' ?
Click to expand...
Click to collapse
Thanks man. That helped.
If anyone ever finds themselves in this situation, make sure your SDK packages are updated to the latest Android OS version. This is why ADB was recognizing my device as offline.
Also, running the command adb pull /sdcard/ C:<somewhereonyourPC> will pull all the data from your HTC one.
icer22x said:
Thanks man. That helped.
If anyone ever finds themselves in this situation, make sure your SDK packages are updated to the latest Android OS version. This is why ADB was recognizing my device as offline.
Also, running the command adb pull /sdcard/ C:<somewhereonyourPC> will pull all the data from your HTC one.
Click to expand...
Click to collapse
oh nice to see adb pull /sdcard/ C:<somewhereonyourPC> was the right syntax :laugh:
For the sdk packages you should always make sure it is updated before doing anything to the phone. Same for drivers. An ''adb devices'' and ''fastboot devices'' won't hurt before messing with the phone to make sure everything set correctly.
Now I presume you'll be ok to flash your rom again?1
I have accidently bricked my device, I rooted the phone and installed the Freedom Flex TWRP. I then thought to take the OTA for KitKat which ended up bricking my Flex. Whenever the phone turns on it boots past the LG logo and straight into TWRP. I tried sideloading the DFUSE stock att rom but I get an error saying "cannot read sideload". I have no other options, any help is appreciated.
Solved thanks to jacktackle!
His steps:
from the TWRP terminal command type
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
then hit enter (it should copy some file. if nothing happens then twrp backup is only option.) if there is some activity then type the next command.
where you have to change only the last word
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc
then hit enter and reboot
Good news. U can get to recovery you are not bricked. Even better news it is a easy fix. I was in the same boat.
To fix it:
Download the stock JB zip room. It is large, about 1.7 Gig. Make sure it downloads correctly.
Copy the file in your adb directory.
Boot into recovery and connect your phone to the computer.
Adb devices should give you the device info. Afterwords enter:
adb push <name of the zip> /sdcard/
It will take about 10 minutes for it to complete. In the meantime you will see no activity. Wait.
After it completes, do a factory reset and install the zip as normal.
Done.
Reboot, do a factory reset from the settings, accept the ota and root with stump root.
johny101010 said:
Good news. U can get to recovery you are not bricked. Even better news it is a easy fix. I was in the same boat.
To fix it:
Download the stock JB zip room. It is large, about 1.7 Gig. Make sure it downloads correctly.
Copy the file in your adb directory.
Boot into recovery and connect your phone to the computer.
Adb devices should give you the device info. Afterwords enter:
adb push <name of the zip> /sdcard/
It will take about 10 minutes for it to complete. In the meantime you will see no activity. Wait.
After it completes, do a factory reset and install the zip as normal.
Done.
Reboot, do a factory reset from the settings, accept the ota and root with stump root.
Click to expand...
Click to collapse
Its not showing up, re installed drivers about 3 or 4 times now, im going to try to update adb drivers.
Im running Windows 7 Ultimate x64bit
Edit: Didn't work doesn't even show up in device manager.
Going to try it on my WIndows 8 laptop
Mine was on Win8 laptop but if all fails just connect it to a Linux box and it should work fine.
johny101010 said:
Mine was on Win8 laptop but if all fails just connect it to a Linux box and it should work fine.
Click to expand...
Click to collapse
Same problems, tried to sideload but i get "cannot read sideload" and adb push shows device not found. I don't have a linux box, but is there any other to fix this? I hear the pop up sound whenever I plug the phone into my WIn8 Laptop but nothing comes Up (i.e. USB/adb/etc.)
What happenes if you enter <adb devices> ?
52me52 said:
Same problems, tried to sideload but i get "cannot read sideload" and adb push shows device not found. I don't have a linux box, but is there any other to fix this? I hear the pop up sound whenever I plug the phone into my WIn8 Laptop but nothing comes Up (i.e. USB/adb/etc.)
Click to expand...
Click to collapse
This LG fLEX is full of problems thanks for XDA Developers site for retriving so many devices and next is you in the list brother.
Ok it's very easy.
do you have a backup of twrp? saved somewhere? if not ask any one on the forum with d950 varient who have a backup can help you to upload it.
after you get a twrp backup, come back to me. it's a piece of cake then.
in the mean time, try this from TWRP recovery
from the TWRP terminal command type
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
then hit enter (it should copy some file. if nothing happens then twrp backup is only option.) if there is some activity then type the next command.
where you have to change only the last word
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc
then hit enter and reboot
jacktackle said:
This LG fLEX is full of problems thanks for XDA Developers site for retriving so many devices and next is you in the list brother.
Ok it's very easy.
do you have a backup of twrp? saved somewhere? if not ask any one on the forum with d950 varient who have a backup can help you to upload it.
after you get a twrp backup, come back to me. it's a piece of cake then.
in the mean time, try this from TWRP recovery
from the TWRP terminal command type
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
then hit enter (it should copy some file. if nothing happens then twrp backup is only option.) if there is some activity then type the next command.
where you have to change only the last word
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/misc
then hit enter and reboot
Click to expand...
Click to collapse
edit: Tried the terminal emulator thing and it worked! Thank you SO much!
52me52 said:
edit: Tried the terminal emulator thing and it worked! Thank you SO much!
Click to expand...
Click to collapse
wellcome anytime. glad that we can help the needies
same boat as op but cwm
Hi I have tripped and stumbled down the exact same path as the op, but with cwm. Will this fix work for me?
I could really use someone's help with this, there is no terminal emulator in cm and my computer reads my D950 in device manager as a D959.. I don't know what to do to fix it..