Hi,
i flashed my SGS with JM6. Because of the near release of 2.2 officialy over kies i asked me, if it will be possible for me to update the SGS over kies.
I ask this because the JM& is not a officially firmware.
kind regards
srkonus
Related
Hi every one
i just got my official froyo update via Kies ..
but alot of applications are in spanish.. can any one know why ???
Please help
Probably your phone is from Spanish. I bought mine and its from Germany so I've uptated to Froyo while everyone else in Poland are still waiting for official Froyo update.
hello,
i saw on tweakers.net that the update for the samsung galaxy s is avaleble.
i got now version 2.2.1 i want to update it to 2.3.3 when i start kies and i connect my phone. it dosnt say there is a update. i saw on the internet that it isnt avaleble in the netherlands. how long i need to wait till i can update my galaxy? i can i do it now. i only want the original updates and no custom roms.
xorium
You will just have to be patient. It was released but then taken down, so just got to wait.
Samsung temporarily pulled the update due to unspecified "issues" so who knows how long you will have to wait.
I'd just download and flash the official update with Odin but that's up to you.
What if I install Galaxy S Gingerbread ROM (XXXJVK) and later I want to update it through Kies with the last version that will be further published by Samsung? Would that be possible or I would need to perform any kind of 'rollback' before update it?
Also, is there an official Galaxy S ROM for 2.3.3 ?
Thank you. New here.
willian7 said:
What if I install Galaxy S Gingerbread ROM (XXXJVK) and later I want to update it through Kies with the last version that will be further published by Samsung? Would that be possible or I would need to perform any kind of 'rollback' before update it?
Also, is there an official Galaxy S ROM for 2.3.3 ?
Thank you. New here.
Click to expand...
Click to collapse
\Kies will only update original firmware .
You will need to roll back to a later firmware and spoof Kies to believe its your original rom to get update .
Also, is there an official Galaxy S ROM for 2.3.3 use JVK or later from samfirmware .
jje
Thanks, JJE.
Hum, not sure now. It seems too much work
;/
Hi, i have a SGS and these are my data:
*#1234#
PDA: I9000XWJPH
PHONE: I9000XXJPP
CSC: I9000OXXJP9
BUILD: 2010.12
*2767*4387264636#
PCODE: GT-I9000HKYEUR
but kies don't want to upgrade my phone... I would only use the official way
Can you help me??
psaico said:
Hi, i have a SGS and these are my data:
*#1234#
PDA: I9000XWJPH
PHONE: I9000XXJPP
CSC: I9000OXXJP9
BUILD: 2010.12
*2767*4387264636#
PCODE: GT-I9000HKYEUR
but kies don't want to upgrade my phone... I would only use the official way
Can you help me??
Click to expand...
Click to collapse
IS THERE AN UPGRADE FOR YOUR PRODUCT CODE
if not Kies can not upgrade something that does not exist yet .
jje
Yesterday I received a new firmware for my Swisscom 3G Galaxy Tab when i launched Kies.
First it asked me to update Kies, then after system reboot, it suddenly asked my if i'ld like to update to the new firmware. Anxious of getting Gingerbread, I chosen yes.
Guess what ...
No Gingerbread but Froyo 2.2.1
GT-P1000
Baseband: P1000XXJMI
Kernel: 2.6.32.9
Build: Froyo XWJMJ
Kies did not give me any further updates after this.
So, still, no GB
Cheers
Martin
Gingerbread has started rolling out and you can now update to it via Odin.
| Don't Revive Me Bro! |
Oh my God. I taught it was gingerbread already...
Sent via Galaxy Tab
I need GINGERBREAD!!
FabioMC said:
I need GINGERBREAD!!
Click to expand...
Click to collapse
Did you read the 1st reply to the OP?!
is there a way not to do a full wipe when installing gingerbread?
I heard that firmware 2.2.1 must be installed before gingerbread can be deployed. So it is probably good that you installed it.
Now if you really want gingerbread today go to the developers section and install the Overcome rom. In its thread you'll find a great guide if followed the installation is very simple.
Sent from my GT-P1000 using XDA App
MartinMu said:
Yesterday I received a new firmware for my Swisscom 3G Galaxy Tab when i launched Kies.
First it asked me to update Kies, then after system reboot, it suddenly asked my if i'ld like to update to the new firmware. Anxious of getting Gingerbread, I chosen yes.
Guess what ...
No Gingerbread but Froyo 2.2.1
GT-P1000
Baseband: P1000XXJMI
Kernel: 2.6.32.9
Build: Froyo XWJMJ
Kies did not give me any further updates after this.
So, still, no GB
Cheers
Martin
Click to expand...
Click to collapse
Same here.
But on my Tab it still says Froyo 2.2, but the kernel is the same, as well the baseband and Build.
I was hoping for GB...
Hi i have the following firmware this is an official firmware
PDA:JPE/PHONE:JPB/CSC:JPA (KOR).
but this is froyo 2.2 and i understand that there is an official update of 2.3.3 and i would like to update to it but the problem is Kies says
This version of the device cannot be updated
can someone please direct me to a proper official firmware so that i can enjoy the gingerbread benefits and i tried to look around for any good sources but none are helpful and also i read that there are force close issues with the 2.3.3 on some apps is this serious? tks
jackandjill20101 said:
Hi i have the following firmware this is an official firmware
PDA:JPE/PHONE:JPB/CSC:JPA (KOR).
but this is froyo 2.2 and i understand that there is an official update of 2.3.3 and i would like to update to it but the problem is Kies says
This version of the device cannot be updated
can someone please direct me to a proper official firmware so that i can enjoy the gingerbread benefits and i tried to look around for any good sources but none are helpful and also i read that there are force close issues with the 2.3.3 on some apps is this serious? tks
Click to expand...
Click to collapse
I think kies is the only official way to upgrade your SGS.
So, wait for Kies fixing this problem or go to http://www.samfirmware.com/WEBPROTECT-i9000.htm and flash one with odin
so the samfirmware is an official as in not my region but i am still ok with it as i am from singapore and malasiya has already got it... tks for the quick reply though
Hi. Can anyone please help me.
I have a new galaxy GT-I9000HKYORS. I live in New Zealand and am trying to update via Kies to Gingerbread 2.3.3. Kies keeps telling me that the current firmware is up to date. It is Froyo 2.2. I know Gingerbread is available but I just cannot get it.
Does anyone know why?
Thank you.
Which Kies version do you have? You need the newest do download Gingerbread for Galaxy S
fuss132 said:
Which Kies version do you have? You need the newest do download Gingerbread for Galaxy S
Click to expand...
Click to collapse
Doesn't kies show if update is available..?