As the title says guys i cannot for the life of me find where the USB settings are on JPM i.e Mass storage; Kies etc etc.
Any help?
Settings --> Wireless and Network --> USB Settings.
LOL thanks
me = dumbass XD
Related
im trying to connect my usb and it doesnt work i want to update to the official 2.1 since the other roms arent helping.... i just had this usb problem since i used aloyhius L please help when it connects it just chargers i tryed on 2 cords ... i got ask me on and off and i used disk drive and charge only modes
its still a problem ... its charging but doesnt read connection
make sure you have usb debugging enabled if you're trying to load a rom.... go to:
Settings > Applications > Development > Check the usb debugging box.
Try this widget. Put it on your homescreen then plug in your USB cord and hit it.
http://www.androlib.com/android.application.at-abraxas-mountusb-qqE.aspx
http://community.sprint.com/baw/thread/32304?start=0&tstart=0&reqsorting=dec
i think its a problem with the 2.1 upgrade
Anyone else having problems with your PC not recognizing the phone? Even after selecting mass storage in the usb settings, when i plug the phone in to the PC the little usb notification in the notification isn't showing up.
donwonlee said:
Anyone else having problems with your PC not recognizing the phone? Even after selecting mass storage in the usb settings, when i plug the phone in to the PC the little usb notification in the notification isn't showing up.
Click to expand...
Click to collapse
Have you installed the Samsung drivers?
yeah i've tried installing the drivers. the phone isn't even putting the usb icon in the notification tray anymore. just starts charging and that's it. i go to usb settings/mass storage and nothing. any ideas?
I got that too, I just put the usb cable in another usb port on my computer and tadaaaa: problem fixed
I had this issue and read in a forum (not sure where wish I did to give credit) where u need to format your internal SD memory (the built in 16 gig SD) I did that and it started to work again.
Sent from my SAMSUNG-SGH-I897 using XDA App
donwonlee said:
Anyone else having problems with your PC not recognizing the phone? Even after selecting mass storage in the usb settings, when i plug the phone in to the PC the little usb notification in the notification isn't showing up.
Click to expand...
Click to collapse
How about Menu > settings > applications > usb settings > ask on connection.....
Palmetto_X said:
How about Menu > settings > applications > usb settings > ask on connection.....
Click to expand...
Click to collapse
I had/have this problem sometimes too. choosing "ask on connection" usually works. I find that if you select anything other than "mass storage" then exit out, then go back in and choose mass storage, it works again.
Usually only have to do it once after a factory reset or on a new phone
I find my connection to be hit or miss. The pc picks up the drivers fine but doesn't mount the phone as a drive. Kies is a pain to get going too. I read on here that you need .net framework 4 and also no file names over 16 characters, and without kies I think you need to be in debug mode on application settings. I still need to try the short file names and see if it improve it but I never really hook up to a pc anyway, my father has win 7 and I have kies on his computer. I have linux mint 9 on my own so I rarely get to fitz with it on a windows machine.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
I'm having this problem, can't get usb debugging mode to turn off. It immediately turns on when I turn it off. It's as the just says, "yeah, you can uncheck it, but I'm gonna leave it on."
HI,
I got my phone updated to 2.2.1, since then whenever i connect my phone to pc through USB cable, ph automatically connects in kies mode.
earlier it used to give three options: media player, kies, mass storage.
I have SGS I9000 in Germany.
Can anyone pls help?
Home button -> Settings -> wireless & network -> usb settings. Choose what u like.
Swyped from another GALAXY
My Galaxy Tab when connected to PC via Samsung KIES runs fine... but when I connect it as Mass Storage, it doesn't show up in My Computer... I even tried re-flashing the TAB again to overcome kratos and the default stock rom... to no avail... need help...
To make things a bit clearer, here's the setup...
USB Debugging set to OFF / PC running Windows 7
USB Settings set to SAMSUNG KIES
PC detects the TAB as GT-P1000 and I can access the internal storage... though a tad bit slow when transferring data & stuff...
USB Settings set to MASS STORAGE
PC detects the TAB -> TAB displays USB Connected -> press CONNECT USB STORAGE
PC detects TAB as Android UMS Composite USB Device -> note without drive letter
After sometime, I've finally found the culprit... here's my solution:
#1 - Set USB Settings to MASS STORAGE -> Connect TAB -> PC detects TAB but doesn't show TAB as USB Device
#2 - run the program diskmgmt.msc via Windows Start Button->Run->diskmgmt.msc
#3 - Disk Management loads all detected hard drives & USB media... saw my TAB's icon without the drive letter... (it seems Win7 had a hard time assigning one, maybe because I've got lots of USB drives)
#4 - Right-click on the TAB's icon and on the context menu choose -> Change Drive Letter and Paths...
#5 - Simply assign a drive letter and voila! Your TAB's detected again as USB Mass Storage
When you try to use mass storage do you go into menu, settings, wireless and network, usb settings, and change it to mass storage?
Sent From Githrog's Tab
yes... it was working fine the last time I've connected the TAB as usb mass storage... but after the next time... it was no longer displaying on my computer...
same here.. using kratos overcome ROM.. my laptop detects the said removable devices but when i double click on it, it says it needs to be formatted.. =/
I am not sure if this will work, but see if USB debugging is on. If so, turn it off.
Sent from my SCH-I800 using XDA App
Already tried both, but to no avail... what could be the problem..?
Same to me and now I am back to the stock ROM though still no USB charging as original
icarusjun said:
My Galaxy Tab when connected to PC via Samsung KIES runs fine... but when I connect it as Mass Storage, it doesn't show up in My Computer... I even tried re-flashing the TAB again to overcome kratos and the default stock rom... to no avail... need help...
To make things a bit clearer, here's the setup...
USB Debugging set to OFF / PC running Windows 7
USB Settings set to SAMSUNG KIES
PC detects the TAB as GT-P1000 and I can access the internal storage... though a tad bit slow when transferring data & stuff...
USB Settings set to MASS STORAGE
PC detects the TAB -> TAB displays USB Connected -> press CONNECT USB STORAGE
PC detects TAB as Android UMS Composite USB Device -> note without drive letter
After sometime, I've finally found the culprit... here's my solution:
#1 - Set USB Settings to MASS STORAGE -> Connect TAB -> PC detects TAB but doesn't show TAB as USB Device
#2 - run the program diskmgmt.msc via Windows Start Button->Run->diskmgmt.msc
#3 - Disk Management loads all detected hard drives & USB media... saw my TAB's icon without the drive letter... (it seems Win7 had a hard time assigning one, maybe because I've got lots of USB drives)
#4 - Right-click on the TAB's icon and on the context menu choose -> Change Drive Letter and Paths...
#5 - Simply assign a drive letter and voila! Your TAB's detected again as USB Mass Storage
Click to expand...
Click to collapse
That is fantastic, now I know how to fix this problem if it should ever arise for me, once I get my new laptop of course... my current pc is running xp so im not sure if this would be the same presedure to fix. Very nice explanation
Sent from Githrog's Charm
I've just installed an SD card and have noticed that no matter what I change it to in the "USB connection methods" from the notification panel while USB is plugged in, it always seems to default back to "USB flash drive" when i plug the USB back in.
Is there a way to change this default value?
I seem to be missing the menu in Storage to get to this menu in the settings.
Using MyRom 1.2 - EMUI 2.3