Related
Going into the console from recovery, the sdcard folder exists, but is empty. I thought at first it wasn't mounting, but I am able to using the nandroid backup and recovery tool. I was using the console earlier to rename my nandroid backups so that I can differentiate them. After booting into the latest CM6 nightly, this happened.
Also after exiting console by typing 'recovery' and entering it again, I get stuck and am unable to type anything or get out without a hard reboot.
I appreciate the help.
Sent from my T-Mobile G1 using XDA App
funkeee said:
Going into the console from recovery, the sdcard folder exists, but is empty. I thought at first it wasn't mounting, but I am able to using the nandroid backup and recovery tool. I was using the console earlier to rename my nandroid backups so that I can differentiate them. After booting into the latest CM6 nightly, this happened.
Also after exiting console by typing 'recovery' and entering it again, I get stuck and am unable to type anything or get out without a hard reboot.
I appreciate the help.
Sent from my T-Mobile G1 using XDA App
Click to expand...
Click to collapse
try /mnt/sdcard
I don't seem to have an /mnt/ folder anymore.
I can see things on my sdcard when I go to flash zip or nandroid recovery. But not from console...
I tried to "mount -t vfat /dev/block/mmcblk0 /sdcard" but it says invalid argument.
Output of cat /proc/mounts is:
rootfs / rootfs rw 0 0
tmpfs /dev tmpfs rw,mode=755 0 0
devpts /dev/pts devpts rw,mode=600 0 0
proc /proc proc rw 0 0
sysfs /sys sysfs rw 0 0
/dev/block/mtdblock4 /cache yaffs2 rw,nodev,noatime,nodiratime 0 0
/dev/block
EDIT: I got it working, thanks. I flashed Clockwork recovery and then flashed Amon Ra over that. That was strange.
First of all, I'm experienced with android hacking/rooting/whatever but not so much with the galaxy tab.
So, I have this weird problem, whatever changes I make to a partition on the internal SD (including /data and /sdcard) doesnt actually gets applied to the internal SD. This include changes made by installing a app, using a file browser, using mass-storage, a shell command as root, reformat in recovery or even when using ODIN and just re-partitioning the whole thing.
Is this a known issue or does anyone have suggestions?
GSM P1000
edit: running XWJQ8 stock
Mount info:
Code:
# mount
mount
rootfs / rootfs ro,relatime 0 0
tmpfs /dev tmpfs rw,relatime,mode=755 0 0
devpts /dev/pts devpts rw,relatime,mode=600 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
none /acct cgroup rw,relatime,cpuacct 0 0
/dev/block/stl6 /mnt/.lfs j4fs rw,relatime 0 0
tmpfs /mnt/asec tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/obb tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /app-cache tmpfs rw,relatime,size=12288k 0 0
none /dev/cpuctl cgroup rw,relatime,cpu 0 0
/dev/block/stl9 /system rfs ro,relatime,vfat,log_off,check=no,gid/uid/rwx,iocharset=utf8 0 0
/dev/block/mmcblk0p3 /preload vfat ro,nodev,noatime,nodiratime,fmask=0133,dmask=0022,codepage=cp437,iocharset=
iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
/dev/block/mmcblk0p2 /data rfs rw,nosuid,nodev,relatime,vfat,llw,check=no,gid/uid/rwx,iocharset=utf8 0 0
/dev/block/stl10 /dbdata rfs rw,nosuid,nodev,relatime,vfat,llw,check=no,gid/uid/rwx,iocharset=utf8 0 0
/dev/block/stl11 /cache rfs rw,nosuid,nodev,relatime,vfat,llw,check=no,gid/uid/rwx,iocharset=utf8 0 0
/dev/block/stl3 /efs rfs rw,nosuid,nodev,relatime,vfat,llw,check=no,gid/uid/rwx,iocharset=utf8 0 0
Tried flashing CF-root and formatting from CWM. /data and /sdcard still have all their data after being formatted.
edit:
Tried fsck, umount, and more linux tools. nothings helps.
Im trying to get to the bottom of what sounds like exactly the same issue.
A few more details noted here:
*edit to note I cant post external links*
My current guess is that at some point it's locked "read only". I'd just be happy with a working 2.3 tab at the moment. Forget any other roms lol.
If you get any further with it, I'd appreciate any answers you come up with. Visa versa if I beat you to it.
The_Double said:
First of all, I'm experienced with android hacking/rooting/whatever but not so much with the galaxy tab.
So, I have this weird problem, whatever changes I make to a partition on the internal SD (including /data and /sdcard) doesnt actually gets applied to the internal SD. This include changes made by installing a app, using a file browser, using mass-storage, a shell command as root, reformat in recovery or even when using ODIN and just re-partitioning the whole thing.
Is this a known issue or does anyone have suggestions?
GSM P1000
edit: running XWJQ8 stock
Click to expand...
Click to collapse
This exactly is my problem. Has someone here know the problem?
Thats three of us then. I'v found another two instances of the isue on "the Galaxy tab fourm" and posted a long log of trying to resolve it.
Those were both some time ago however and havent resurfaced. There is another thread on XDA comlaining of the same issue but no solutions or fix.
I', still trying to get this sorted so if I do encounter a resolution beyond "pay someone to fix it" then I will let you know.
Unfortunately I cant even do that as without knowing the cause I doubt I'd get it back repaired....
Any assitance would be very welcome, Im using just the browser on a p1000 as nothing else works.... Depressing lol.
I have exactly the same issues with a SGT-P1000 GSM. Tried everything but after reboot all data, that i wiped is back on internal memory. i could wipe partition and create ext4 partition with mini tool partition wizard, but just a couple of moments later after creating the partition successfully the partition changes back to fat32 and all data is back on internal memory, neverending story ...
Further research and a new error message suggests that there might be a link to the "system UIDs Inconsistent" error which has been reported across the forums for a variety of devices.
Im looking into it...
Hello! I have the exactly same issue. Has anyone been able to solve this?
I've tried cyanogen rom, the official (stock) ROM and that does not seem to solve my problem.
I've also tried, with a custom kernel, access the ADB shell as root on recovery mode and anything that I do, doesn't "stick". FDisk, file creation, file removal. NOTHING.
I'm a week like this and this post is the only reference I've found that has the exactly same problem that I do.
Please, do tell your findings.
Thanks,
- Sergio Moura
Little dont understand this, but i try to help
Maybe you can try dd command, i never using this for my tab but i often using in my linux..
dd if=/dev/zero of=/dev/path/your/sdcard
dd is unix or linux tools for low level format and can be used to make image file too. Please backup your data first, i dont responsible for your lose..
Sent from my GT-P1000 using Tapatalk 2
Oh and last thing, let me know if the problem still appear
Sent from my GT-P1000 using Tapatalk 2
Hi All,
(I've read tons of Threads here, but not yet found a solution).
My Galaxy Tab 10.1 is useless right now as it cannot write to internal storage.
Lots of apps crashing on use and doing a factory reset from the recovery menu does not help (Tablet is in exact same state aon reboot).
So, I've been using adb
Code:
C:\Program Files (x86)\Android\android-sdk\platform-tools>adb remount
remount failed: Operation not permitted
Here's the mount information from shell
Code:
[email protected]:/mnt/asec $ mount
mount
rootfs / rootfs ro,relatime 0 0
tmpfs /dev tmpfs rw,nosuid,relatime,mode=755 0 0
devpts /dev/pts devpts rw,relatime,mode=600 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
debugfs /sys/kernel/debug debugfs rw,relatime 0 0
none /acct cgroup rw,relatime,cpuacct 0 0
tmpfs /mnt/asec tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/obb tmpfs rw,relatime,mode=755,gid=1000 0 0
none /dev/cpuctl cgroup rw,relatime,cpu 0 0
/dev/block/mmcblk0p4 /system ext4 ro,relatime,barrier=1,data=ordered 0 0
/dev/block/mmcblk0p5 /cache ext4 rw,nosuid,nodev,noatime,barrier=1,data=ordered 0 0
/dev/block/mmcblk0p8 /data ext4 ro,nosuid,nodev,noatime,barrier=1,data=ordered,noauto_da_alloc,discard 0 0
/dev/block/mmcblk0p1 /efs ext4 rw,nosuid,nodev,noatime,barrier=1,data=ordered 0 0
/dev/fuse /mnt/sdcard fuse rw,nosuid,nodev,relatime,user_id=1023,group_id=1023,default_permissions,allow_other 0 0
So, I've tried to mount manually from adb shell:
Code:
[email protected]:/ $ mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
mount -o rw,remount -t yaffs2 /dev/block/mtdblock3 /system
mount: Operation not permitted
[email protected]:/ $
[email protected]:/ $ mount -o remount,rw -t rfs /dev/block/stl9 /system
mount -o remount,rw -t rfs /dev/block/stl9 /system
mount: Operation not permitted
But, I have no SU command:
Code:
[email protected]:/ $ su
su
/system/bin/sh: su: not found
I've got the su binary from downloading off this forum, but I cannot copy that up either (even to seemingly writable mount points)
Code:
C:\Program Files (x86)\Android\android-sdk\platform-tools>adb push su /cache
failed to copy 'su' to '/cache/su': Permission denied
Any hints to what I can do now?
Ro
Hey, this forum is for Samsung Galaxy Tab 7.
Here is link for SGT 10.1
http://forum.xda-developers.com/forumdisplay.php?f=1050
But looks like your device is not yet rooted correctly.
The easiest thing is to find pre-rooted kernel and flash them via odin.
Thanks for the reply, yappoe!
I was following a guide I found linked on a forum to get the Tablet Restocked to factory settings.
However, when I try to write via Odin, I get an error message on the tablet in Red
Code:
Bct_sync_Odin: Error to NvBuBctUpdate![err:0x140005]
DownloadPartition_Odin: Error to Bct_sync_Odin![err:0x140005]
Tegra_Nand_Write: Error to DownloadPartition![err:0x140005]
Obviously a write error, presumably as the File system is in Read-Only mode ?
Ro
Yes, because permission is not set correctly. You need root access to do that.
I really don't know much about G-Tab 10.1, and I don't know what you were trying to do or are trying to do.
But if you are trying to go back to stock firmware, you can follow this steps.. it works on most Samsung. (Note: Unless you are moving from Honeycomb to ICS or vice versa, you do NOT need to re-partition).
you can download any official firmware at http://fus.nanzen.se/
1. Download Fus Check Downloader 2.1 and downloaded a Firmware for your region. It will automatically decode the .enc2 file to.zip file
(or find your firmware at sammobile.com, you can skip step 2).
2. Extract the .zip file generated from decoding file to a folder and I got
tar.md 5 file.
3. Start Odin - put the .md5 to PDA and leave everything else as is.
4. Go to download mode on the G-tab
and click start. It takes about 6 to 7 minutes to do the flashing.
Can't guarentee if it would work, but good luck.
Once you get it work with STOCK, go to the Galaxy Tab 10.1 forum
and find the instruction there to ROOT
http://forum.xda-developers.com/forumdisplay.php?f=1050
Thanks yappoe,
That is a nice tool for firmware downloading.
Unfortunately I get the exact same error immediately when trying to write to the tablet via Odin.
Code:
Bct_sync_Odin: Error to NvBuBctUpdate![err:0x140005]
DownloadPartition_Odin: Error to Bct_sync_Odin![err:0x140005]
Tegra_Nand_Write: Error to DownloadPartition![err:0x140005]
I think I have a sort of chicken and egg situation where I my problem is my drive is mounted in read-only mode and I cannot change it without rooting/executing su
Ro
same situation
I have the same situation but with my omnia 2.
suddenly, the internal storage became read-only.
I have tried flashing the ROM and unchecking "preserve device contents".
I have tried spyware, malware, antivirus from PC via usb mode.
I have tried low-level format.
I have tried hard reset.
I have tried below cabs.
MoviPatch_Eng_100416
nueStorageManager-v1.1
Til now, i still have the problem.
Im using a micro sd instead.
Im planning on opening my phone and removing the internal memory chip instead lol.
I did open up my tablet.
The internal memory is part of a single mainboard.
(I think its the same in almost every device)
Looking into getting a replacement mainboard now.
It's possible to use an external SD card as the internal storage. This won't fix the internal storage, but your Tab will work again. See this thread.
ableeker said:
It's possible to use an external SD card as the internal storage. This won't fix the internal storage, but your Tab will work again. See this thread.
Click to expand...
Click to collapse
Cheers for the pointer, but the Galaxy Tab 10.1 doesn't have a place for an SD / micro SD card addition.
Ah. But you asked in the wrong forum.
Go to Galaxy tab 10.1 forum
Sent from my GT-P1000 using xda app-developers app
Yeah i asked a technician if he could do it, he said he has no idea where that chip is in the mainboard
Sent from my GT-I8160 using Tapatalk 2
supersaiyanx said:
Yeah i asked a technician if he could do it, he said he has no idea where that chip is in the mainboard
Click to expand...
Click to collapse
The mainboard cannot have components removed/added ... You have to replace the entire mainboard.
Dual-booting has always intrigued me. I dual-boot between Windows and Linux on one of my computers, dual-boot between stock firmware and RockBox on my Sansa Fuze v2, and I decided to find out how to dual-boot my Galaxy Tab 2 7.0". It took a couple days of work, but I have found one way to do so using the external SD card.
In the future, if I can work it out, I will provide a method for dual-booting using only internal storage. Update: I have successfully tested an internal dualboot setup. I will post details later.
Warning: While I am not aware of any specific way this could brick your device, stuff happens, so don't blame me. I've tested this and found no problems, but you may not be the same.
To use this method, you need a microSD card at least 8GB in size. If you use 8GB, though, you will have pretty limited space for storage, so a card 16GB or greater is advised.
Preparing SD Card
Repartition your microSD card using whatever program suits you. You need to shrink the first storage partition to make room for the new system partitions. The new partitions should take at least 5GB, so be sure to leave at least 5.25GB. You can always resize later if you need to.
After shrinking your storage partition, create four ext4 partitions in this order: system (min 800MB, recommended 1.25GB), cache (min 500MB, recommended 700MB), data (min 3GB, recommended 5GB), and EFS (min 21MB, recommended 32MB).
Verify your partitions on your tablet by inserting the SD card, booting into CWM, and running "parted /dev/mmcblk1" (no quotes) over ADB shell.
Flashing External ROM
Now you just need a ROM to flash. Most ROMs are not packaged to run from external SD card. You MUST either use a provided ROM or edit one yourself. I provide here a repackaged version of the 8/28 CM10 nightly which can flash to and run from your SD card. If you want to edit a ROM yourself, see the bottom of this post.
Boot into CWM and backup. You will need your backed up boot image if anything goes wrong.
Now flash your ROM. It will install to the external SD card on the appropriate partitions if you did everything right. Reboot: you should be in your new ROM.
You'll probably want a Google Apps package. See below for packages for external dualboot.
Using Your Dual-Boot Setup
Your internal and external ROMs do not share internal storage, due to the odd nature of the SD card fuse tool.Your external ROM has an "internal SD card" of its own. You may find a way to mount the internal /data/media to the external ROM's /sdcard. My new ROM conversion script will add attempt to mount the internal ROM's storage to /storage/intSdCard
The ROMs I provide here include a script in /system/bin called "bootinternal." Run this from a terminal emulator or adb to switch from the external ROM back to the internal one. I have attached a script called "bootexternal" to this post. Use it on your internal ROM to switch to the external one (remember to set the executable permission).
In order for the boot switching scripts to work, you must do some preparation. On your external ROM, place the internal ROM's boot.img in /sdcard/Boot/internal.img. For your internal ROM, place your external ROM's boot.img in /sdcard/Boot/external.img.
If you ever need/watch to switch ROMs manually, run the following commands in a terminal emulator or over ADB, replacing "boot.img" with the boot image of the ROM you are switching to:
Code:
cat boot.img > /dev/block/mmcblk0p5
reboot
Alternatively, you could switch boot images using Mobile Odin.
Update: I would skip using my prepackaged ROMs now, because I have uploaded a converter script that will actually do a better job. These will configure the "bootinternal" and "bootexternal" scripts automatically.
If you ever need to wipe your data, cache, or dalvik cache, see the next post for CWM zips.
Downloads
Roms for External SD Card:
CyanogenMod 10 Nightly (8/28/2012)
AOKP P3113 Stable
Note that these are probably unnecessary now, because I provide a script to convert ROMs automatically on Linux.
Google Apps Packages for External SD Card:
Gapps for Jelly Bean - Use for CM10, AOKP, etc
Gapps for Ice Cream Sandwich - Use for stock, RomsWell, etc
If I ever have time, I plan to upload SD card images which you can use to partition your external SD card automatically.
---
Repacking a ROM for Dual-boot from SD Card
Note: You no longer need to do this manually. I have uploaded a script which automates the conversion process. See the next post for download.
First, you need to extract and unpack the boot image. There are tools and scripts available for this, so find one.
Once the boot image is unpacked, you need to edit init.espresso.rc on the ramdisk. Find where the partitions are mounted and change the code to look like this (yours may look slightly different depending on the ROM, but just be sure to replace the default partition mounts with those of your SD card partitions):
Code:
#mount ext4 /dev/block/platform/omap/omap_hsmmc.1/by-name/FACTORYFS /system wait rw
mount ext4 /dev/block/mmcblk1p2 /system wait rw
#mount ext4 /dev/block/platform/omap/omap_hsmmc.1/by-name/FACTORYFS /system ro remount
mount ext4 /dev/block/mmcblk1p2 /system ro remount
#mount ext4 /dev/block/platform/omap/omap_hsmmc.1/by-name/DATAFS /data wait noatime nosuid nodev crypt discard,noauto_da_alloc
mount ext4 /dev/block/platform/omap/omap_hsmmc.1/by-name/DATAFS /data2 wait noatime nosuid nodev crypt discard,noauto_da_alloc
mount ext4 /dev/block/mmcblk1p4 /data wait noatime nosuid nodev crypt discard,noauto_da_alloc
#mount ext4 /dev/block/platform/omap/omap_hsmmc.1/by-name/CACHE /cache wait noatime nosuid nodev nomblk_io_submit,errors=panic
mount ext4 /dev/block/mmcblk1p3 /cache wait noatime nosuid nodev nomblk_io_submit,errors=panic
#mount ext4 /dev/block/platform/omap/omap_hsmmc.1/by-name/EFS /efs wait rw
mount ext4 /dev/block/mmcblk1p5 /efs wait rw
Repack the boot image and stick it back into the ROM. Then edit the updater-script, and change all references to the internal system partition (/dev/block/mmcblk0p9) to the external system partition (e.g. /dev/block/mmcblk1p2). If any other partitions are referenced, change them as well.
Optional: insert the "bootinternal" script in /system/bin and the a script to mount the internal storage in /system/etc/init.d.
Your ROM is ready to go. Flash and be happy!
Thanks to Johnsel for helping me edit the boot image and pointing me to sendust7's work on the Atrix, who I also thank for his precedent.
CWM Zips for Wiping External Partitions
If you ever need to wipe /data, /cache, or dalvik on your external dual-boot partitions, you can use these CWM zips to do so.
Update: Here is a script to automate the conversion of a ROM from standard to external dualboot.
interesting... gonna try this later...
Nice guide! Dual boot with stock and cm9/10/AOKP would be ideal.
Confirmed?
Sent from my GT-P3113 using Tapatalk 2
scottx . said:
Nice guide! Dual boot with stock and cm9/10/AOKP would be ideal.
Click to expand...
Click to collapse
Agreed! Is it possible to dual boot stock and AOKP?
IFLATLINEI said:
Agreed! Is it possible to dual boot stock and AOKP?
Click to expand...
Click to collapse
Absolutely. If you're running stock, just follow the instructions to partition your SD card, then flash the provided AOKP package and (I assume you would) the gapps package. You should boot right into to your external AOKP installation. Then just copy your stock boot image to /sdcard/Boot/internal.img and run "bootinternal" from a Terminal Emulator or adb shell to return to stock.
BRILLIANT !!!
A few suggestions:
Possible to have a GUI to switch ROM or even better to have it at boot (through kernel).
Script to Automate the process of converting any(P31xx) ROM to dual-boot. It will take away pressure off you.
Thanks !
thanks for the tutorial.
silentvisitor said:
BRILLIANT !!!
A few suggestions:
Possible to have a GUI to switch ROM or even better to have it at boot (through kernel).
Script to Automate the process of converting any(P31xx) ROM to dual-boot. It will take away pressure off you.
Thanks !
Click to expand...
Click to collapse
The GUI may or may not happen, since I, while familiar with partitions and scripting, don't know much about Java or Android development. I'll look into it, though. Having it run at boot through the kernel is beyond my skills. The closest I could do would be an init.d script.
As for a script to automate the conversion process, that seems doable. It only involves two files (init.espresso.rc in the boot image and the updater-script), so I could see that happening. I'll try to do something with that.
This is very interesting!
But I think it is better if we can install dual-boot like CM10 and some porting of Linux desktop version, chrome OS (love it) and other
I follow this thread!
Update: I've added a script that automatically converts ROMs to external dualboot format. I advise using this script instead of my provided ROMs. Just open a terminal in the script's directory and run:
Code:
./convert.sh rom-to-convert.zip
It will automatically edit the boot image and updater script, as well as configure the dualboot scripts. Go back to the second post to download.
Dual-boot question
Sorry for offtop, but your work is very interesting for me. I have GT-P6800 (Tab 7.7) and will try your method on my device. What can i do for it? May be change numeration of partitions inside a script? And firmware counter will be ticked or not? And my current firmware in internal memory will be untoched? Thanks for your work again!
partola1 said:
Sorry for offtop, but your work is very interesting for me. I have GT-P6800 (Tab 7.7) and will try your method on my device. What can i do for it? May be change numeration of partitions inside a script? And firmware counter will be ticked or not? And my current firmware in internal memory will be untoched? Thanks for your work again!
Click to expand...
Click to collapse
I would assume our tablets are very similar, so my method probably would work as is. To be sure, extract the updater-script from your rom and send it to me, along with the boot image, and I'll check it out. Your firmware counter will not be increased, and your current firmware should not be affected.
marry me. I just asked the dual boot question like a week ago lol
Macadamia Daze said:
I would assume our tablets are very similar, so my method probably would work as is. To be sure, extract the updater-script from your rom and send it to me, along with the boot image, and I'll check it out. Your firmware counter will not be increased, and your current firmware should not be affected.
Click to expand...
Click to collapse
Hi, this is my p680 kernel & updater-script:
http://hotfile.com/dl/170647189/80fec16/P6800.ZIP.html
Please, check it!
Also, i have some questions:
as you know, only 4 primary partition allowing on sdcard. I create 1 partition primary fat32 and 4 partitions logical ext4. Is this ok?
And how can i check partitions directly on tab? Terminal emulator not understand parted command, and from recovery TWRP 2.2.0.0 terminal asking me about from which directory execute commands. I try few directories, but parted/dev/mmcblk1 command show nothing to me.
Thank you for your adwise.
partola1 said:
Hi, this is my p680 kernel & updater-script:
http://hotfile.com/dl/170647189/80fec16/P6800.ZIP.html
Please, check it!
Click to expand...
Click to collapse
I'm having problems unpacking your boot image. Run the command "mount" on your tab and give me the output. I looked in your updater-script, though, and that seems compatible.
as you know, only 4 primary partition allowing on sdcard. I create 1 partition primary fat32 and 4 partitions logical ext4. Is this ok?
Click to expand...
Click to collapse
I was able to put 5 primary partitions on my SD card. Are you using an MBR partition table or GUID partition table? You need to use GUID to have 5 primary partitions. Anyway, I don't know if it will make a difference for logical partitions. Once you can check the partitions from your tab, I'll be able to tell you if it will work.
And how can i check partitions directly on tab? Terminal emulator not understand parted command, and from recovery TWRP 2.2.0.0 terminal asking me about from which directory execute commands. I try few directories, but parted/dev/mmcblk1 command show nothing to me.
Click to expand...
Click to collapse
Use CWM instead of TWRP.
Macadamia Daze said:
I'm having problems unpacking your boot image. Run the command "mount" on your tab and give me the output. I looked in your updater-script, though, and that seems compatible.
Click to expand...
Click to collapse
Hi, this is result of mount command:
Code:
[email protected]:/ $ export PATH=/data/local/bin:$PATH
[email protected]:/ $ mount
rootfs / rootfs ro,relatime 0 0
tmpfs /dev tmpfs rw,nosuid,relatime,mode=755 0 0
devpts /dev/pts devpts rw,relatime,mode=600 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
none /acct cgroup rw,relatime,cpuacct 0 0
tmpfs /mnt/asec tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/obb tmpfs rw,relatime,mode=755,gid=1000 0 0
none /dev/cpuctl cgroup rw,relatime,cpu 0 0
/dev/block/mmcblk0p9 /system ext4 ro,noatime,barrier=1,data=ordered 0 0
/dev/block/mmcblk0p7 /cache ext4 rw,nosuid,nodev,noatime,barrier=1,data=ordered 0 0
/dev/block/mmcblk0p1 /efs ext4 rw,nosuid,nodev,noatime,barrier=1,data=ordered 0 0
/dev/block/mmcblk0p10 /data ext4 rw,nosuid,nodev,noatime,barrier=1,data=ordered,noauto_da_alloc 0 0
/dev/block/mmcblk0p4 /mnt/.lfs j4fs rw,relatime 0 0
/sys/kernel/debug /sys/kernel/debug debugfs rw,relatime 0 0
/dev/fuse /mnt/sdcard fuse rw,nosuid,nodev,relatime,user_id=1023,group_id=1023,default_permissions,allow_other 0 0
tmpfs /mnt/sdcard/extStorages tmpfs rw,dirsync,nosuid,nodev,noexec,noatime,nodiratime,size=0k,mode=755,gid=1000 0 0
/dev/block/vold/179:9 /mnt/sdcard/extStorages/SdCard vfat rw,dirsync,nosuid,nodev,noexec,noatime,nodiratime,uid=1000,gid=1023,fmask=0002,dmask=0002,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
[email protected]:/ $
Also, i get CWM instead TWRP. But CWM have not possibility entering commands at all.
If you had troubles with unpacking CM10 kernel, any way for update it to booting from sd?
Thank you.
Why duplicate the efs partition?
And what makes it need such a big cache partition?
Sent from my GT-P1000
partola1 said:
Hi, this is result of mount command:
Code:
[email protected]:/ $ export PATH=/data/local/bin:$PATH
[email protected]:/ $ mount
rootfs / rootfs ro,relatime 0 0
tmpfs /dev tmpfs rw,nosuid,relatime,mode=755 0 0
devpts /dev/pts devpts rw,relatime,mode=600 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
none /acct cgroup rw,relatime,cpuacct 0 0
tmpfs /mnt/asec tmpfs rw,relatime,mode=755,gid=1000 0 0
tmpfs /mnt/obb tmpfs rw,relatime,mode=755,gid=1000 0 0
none /dev/cpuctl cgroup rw,relatime,cpu 0 0
/dev/block/mmcblk0p9 /system ext4 ro,noatime,barrier=1,data=ordered 0 0
/dev/block/mmcblk0p7 /cache ext4 rw,nosuid,nodev,noatime,barrier=1,data=ordered 0 0
/dev/block/mmcblk0p1 /efs ext4 rw,nosuid,nodev,noatime,barrier=1,data=ordered 0 0
/dev/block/mmcblk0p10 /data ext4 rw,nosuid,nodev,noatime,barrier=1,data=ordered,noauto_da_alloc 0 0
/dev/block/mmcblk0p4 /mnt/.lfs j4fs rw,relatime 0 0
/sys/kernel/debug /sys/kernel/debug debugfs rw,relatime 0 0
/dev/fuse /mnt/sdcard fuse rw,nosuid,nodev,relatime,user_id=1023,group_id=1023,default_permissions,allow_other 0 0
tmpfs /mnt/sdcard/extStorages tmpfs rw,dirsync,nosuid,nodev,noexec,noatime,nodiratime,size=0k,mode=755,gid=1000 0 0
/dev/block/vold/179:9 /mnt/sdcard/extStorages/SdCard vfat rw,dirsync,nosuid,nodev,noexec,noatime,nodiratime,uid=1000,gid=1023,fmask=0002,dmask=0002,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
[email protected]:/ $
Click to expand...
Click to collapse
Your essential partitions are the same, but are referenced differently. I will need to make a slight alteration to the conversion script.
Also, i get CWM instead TWRP. But CWM have not possibility entering commands at all.
Click to expand...
Click to collapse
You do it through ADB.
If you had troubles with unpacking CM10 kernel, any way for update it to booting from sd?
Click to expand...
Click to collapse
I'm looking into the boot image, but let's try something out. In the terminal emulator, run "cat /dev/block/mmcblk0p5 > /sdcard/full-boot.img" (without quotes). Then upload that file.
cdesai said:
Why duplicate the efs partition?
Click to expand...
Click to collapse
When I first ran across it, I wasn't sure what it was, so I added it for safety.
And what makes it need such a big cache partition?
Click to expand...
Click to collapse
I'm not sure. I decided to keep it close to the original cache partition size, which was 700+ MB. However, I've found in another setup that I can get by with half that. In my internal dual-boot setup, I have a 384MB cache partition.
Hi !
I installed CM11 on my XperiaV and all the apps like Whatsapp or FB messanger can not save pictures or files.
Read a lot of the threads regarding this problem but could not fix it.
The folder /data/data/com.whatsapp is there, but I think all the apps want to access sdcard0 for that???
But that is in read only filesystem mounted.
mount shows that:
/dev/block/vold/179:33 /mnt/media_rw/sdcard1 vfat rw,dirsync,nosuid,nodev,noexec
,relatime,uid=1023,gid=1023,fmask=0007,dmask=0007,allow_utime=0020,codepage=cp43
7,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
/dev/fuse /storage/sdcard1 fuse rw,nosuid,nodev,relatime,user_id=1023,group_id=1
023,default_permissions,allow_other 0 0
/dev/block/vold/179:15 /mnt/media_rw/sdcard0 ext4 rw,dirsync,context=ubject_r:
sdcard_external:s0,nosuid,nodev,noexec,noatime,data=ordered 0 0
/dev/block/vold/179:15 /mnt/secure/asec ext4 rw,dirsync,context=ubject_r:sdcar
d_external:s0,nosuid,nodev,noexec,noatime,data=ordered 0 0
/dev/fuse /storage/sdcard0 fuse rw,nosuid,nodev,relatime,user_id=2800,group_id=2
800,default_permissions,allow_other 0 0
So the external card is FAT and the internal is ext4 over fuse...
Cyanogenmod 11 (11-20141112-SNAPSHOT-M12-tsubasa)
Android 4.4.4
Kernel: 3.4.0-perf-g9a1a169
Any help would be awesome because that is really a bad thing those apps can not save anything!
THX
Rainer
Flash the uninstaller zip from my CM12.1 thread. Link is in my signature.
WhiteNeo said:
Flash the uninstaller zip from my CM12.1 thread. Link is in my signature.
Click to expand...
Click to collapse
getting an Error:
Warning: no file contexts
set_metadata_recursive: some changes failed
Error executing updater binary in zip
any thoughts?
THANK YOU SOOOOO MUCH!!!!!
with adb and this commands you mentioned in your post it works:
chmod 777 /mnt/media_rw/sdcard0
chown 1023:1023 /mnt/media_rw/sdcard0
great!!!
THX
Rainer