Related
When I try to enable Bluetooth, buttons becomes gray for a 5-10 seconds, appears message about switching on, and then - checkbox becomes unchecked.
In log:
Code:
ERROR/bluedroid(130): bt_enable: Timeout waiting for HCI device to come up
DEBUG/BluetoothService(130): Bluetooth state 11 -> 10
I have T-Mobile G1, I tried:
- Caynogen 6.0
- XTream Froyo 1.9.5
It looks like:
same here ! Who can answer ?
I also found this (http://androidcommunity.com/forums/f7/g1-bluetooth-will-not-turn-on-29197/) but im cyanogenmod 6.0.2 on Vendor Bravo .I Switched like 5 differents ROMs and always the same problem . I think we really have faulty bluetooth now
Must BT-module return any debug information ? Can I check it by software way ? Or really it can be completely dead ?
same issue
soar said:
Must BT-module return any debug information ? Can I check it by software way ? Or really it can be completely dead ?
Click to expand...
Click to collapse
same issue. after miui 28 update, cant enable bluetooth. tried restore everything, with nandroid, install format new roms etc...
i have this same problem with my x10, i have updated the baseband and have tried many custom roms with no success... my bluetooth hasnt worked since the stock 2.1 upgrade from SE and i really want it back... i dont know if anyone else is having this problem but i thought i would post here first and see if anything comes up... thanks
Hi there
I want to ask you about strange thing a saw after flashing my SGS with any other ROM than my stock PLUS GMS 2.1 Eclair JM2... It's a branded rom which i had when i bought phone in my shop. When i flash any other ROM (like Darky's or Doc's rom) GPS can't catch cold fix... Has problems with lock and sometimes it takes long time to see any satelites... When it get a fix, hot fix are ok later, but after about hour it has again problems with fix... Thats a little annoyng cause on branded ECLAIR GPS works great... I'm always making a wipe and format system before flash a new rom ald flashing roms with wipe option built in... Currently using Doc's v6.2 XXJPY 2.2.1 and same issues - problems with fix after no using gps... The worst is in the morning, after no using gps in more hours... Restarting GPS, restarting GPS status, and fighting with it and sometimes i cant catch fix gps in about 10 - 20 minutes or more... GPS isn't broken i thing if it's working on my stock branded rom... In LbsTestMode everything is seted up corrrectly... On flashed for test JPP radio (someone tells me that is best for GPS) where same problems... Is that normal after wipe that GPS needs few days to work properly? please help me anyone...
Having the same problem. Used pure JPY, GPS was blazing fast and acurate. Now with Doc 6.2 can't even lock to satelites.
if no one helps the only thing will be to flash stock JPY, and apply CWM and kernel with lagfix... But it may not helps... really no one knows whats going on with gps issues after wipe/flash?
Flash this via cwm and see if that fixes your GPS:
http://db.tt/6al5IRR
Sent from my GT-I9000 using XDA App
nope... didn't help... same problem...
Try this then:
http://db.tt/O5ompue
Flash via CWM then do another reboot.
If that fails, I give up
Sent from my GT-I9000 using XDA App
seems that it locks quite fast... 'll check again morning... but somethings strange. after few minutes of working gps is automaticly turning off? why? if im not moving and phone is not used and not moving it is normal?
i'm glad you're getting a quick lock with GPS now. As for your new problem, that is either application or settings related.
Since i've update my SGS to android froyo the Proximity sensor stoped working and the position sensor taken 30sec to turn the image...
I've used the test mode code to check hardware error, but there everything is working perfectly...
If I put the Android 2.1 the problem doesn't show up.
Does anyone have the same problem or solution?
Nobody has this issue?
Is quite strange... because if i put a Android 2.1 ROM everything works just fine, but with later version of android the sensors still working (using test mode from SGS Tools, I confirmed that the sensors are just fine), but the system takes a huge time (~30sec) to do something...
Please, if anyone knows anything that could solve this problem, please say something!
I think that in the first week that I had Froyo everything warked fine, but I'm not sure...
Is there any way to do a complete reset and set everything to default values including Hardware settings?
I've already done Factory reset and Full factory reset, by CWM and Code.
Nobody??? Anything???
Is this a genuine samsung rom you are using .
A flashed rom or a genuine Kies updated firmware .
jje
I'm now using a ROM official (sam***gfirmwares.co*) flashed by ODIN.
Should I try use Kies?
No i was just trying to rule out a flakey rom .
My usual suggestion is a wipe via ODIN
http://forum.xda-developers.com/showthread.php?t=882014
But i would stop at Eclair and see if its solved the problem if OK upgrade further .
jje
Its the same thing...
Its quite awkward, because only apendds in Froyo...
why not try a custom froyo rom, head over to doc's kitchen and cook yourself one up. also try lagfix, and any other speed up tweaks. how does the phone respond normally ?? without the sensors ? is it quite speedy or does it lag ??
The phone work just fine but when i turn the phone it take a lot of time to twist the image... I can even still interact with the screen until it turns...
The proximity sensor takes a lot of time too...
No one else has this problem?
Hi,
Can anyone help me out, i recently installed the new cm7 RC1 for INCs...yesterday i disable the flash function in the camera...and now when i switch it on it doesnt come on at all!
I have used a torch app to see that the back led is still functional, but no camera apps seem to be able to enable it.
how anyone else had the same problem and fixed it?
--want to delete this thread!!-- please ignore and mods could you delete please
Hi
we have 3 galaxy s in our household, 2 of them have a working gps and will lock on, the other one finds about 3 GPS but never locks on .
we are using GPS test from the andriod market to test the phone.
The faulty phone using gps test says inview 3-5 inuse 0) We have sent the phone back to phones4u (UK) and thet sent it to an accridited repair centre.
It came back and the report said it was a software bug
we then retested with gps test and it was only finding 3-5 inview and 0 inuse according to gps test.
All they have done is i think they have just reinstalled the phone back to 2.2 and sent it back to me.
Can you give me any advise on how to fix this please
install jvr -> http://forum.xda-developers.com/showthread.php?t=1139050
Whats the differance between JVR and JVO?
My mums phone is running JVO and the GPS is running fine
can you go from 2.2 straight to JVR?
it has been a bit fixed in jvp/q/r - better signal streanght (snr - signal to noise ratio) due the files updated by samsung - not much but always worth to use latest best files
thats why i always recommend latest firmwares wo any kernels
as samsung never releases sources to latest firmware releases
so you will revert some kernel changes introduced in newer version and not present in kernel builed from older sources
same goes with system files - but in most cases kernels are not touching those
and yes you can go to 2.3.4 jvr straight as long as you will use 3 file firmware and do it as it is said in the thread i linked
Thanks
i will download jvr europe with 512 pit and give it a try will update thread asap
looking forward for your feedback
Many Thanks for your help so far, I have just flashed the Faulty phone with the Links you Provided
However after running GPS Test - its finding 6-8 GPS In View - however its not using any (6+ Inview - 0 Inuse)
is there anything else we could try?
Or do you think the phone is faulty?
what do you mean by
I have just flashed the Faulty phone with the Links you Provided
Click to expand...
Click to collapse
you are posting in i9000 forum not mentioning that you have any other phone model, do you have any other phone model them i9000 ???
if you have i9000 try this
http://forum.xda-developers.com/showpost.php?p=17340205&postcount=1484
you need to be rooted
$omator said:
what do you mean by
you are posting in i9000 forum not mentioning that you have any other phone model, do you have any other phone model them i9000 ???
if you have i9000 try this
http://forum.xda-developers.com/showpost.php?p=17340205&postcount=1484
you need to be rooted
Click to expand...
Click to collapse
My Apologies
I have an I9000 SGS
Do I download both links or just the bottom one?
Then Just Copy and paste the files over righting
still i do not understand
I have just flashed the Faulty phone with the Links you Provided
Click to expand...
Click to collapse
download both - jvr is stock sgs1 gps gr3 is one used in nexuss and soem say it is better
i am testing the gr3 atm so cant speak but it seems better
Which zip do i install First and try
Nevermind
GPS_JVR is Stock
Installing GPS_GRK39C as we speak
Ive Installed the files (I think )
How long do you have to wait on average for it to find the First GPS?
depends, should be something around minute. ive got fix after flashing in about 20 seconds
but it depends on snr in your location, and so many other variables
btw enable data connection/wifi so phone can download agps data
without that it infact can take couple of minutes
Does the Phone Download the agps data automatically?
yup =) as long as there is active data connection/wifi
use those apps to test and download agps:
GPS Status & Toolbox
GPS Test
GPSTest
$omator said:
yup =) as long as there is active data connection/wifi
use those apps to test and download agps:
GPS Status & Toolbox
GPS Test
GPSTest
Click to expand...
Click to collapse
What is a decent Program to Copy and paste the Files all together?
what files geez
Sorry - i arn't making my self Clear - The GPS Modified Files ?
you mean /data/gps/ ??
why you want to save that ??
any file explorer that can mount there
Ok - Seems we have a Working GPS
Once GR3 has been Released - Can you Upload it please?