Water damage ruins HD screen - Captivate Q&A, Help & Troubleshooting

I recently dropped my phone in water. It was only submerged for a few seconds, and the litmus paper inside the battery compartment wasn't even tripped. The sliding door on the USB port was open, however, so I suspect water got in either through that or the headphone jack. The screen is readable..barely. Every other horizontal pixel on the screen is a black line. Can anyone tell me if it's possible to recondition the screen, or if there is any way at&t would be able to tell that it's damaged from water as opposed to a fall? Thanks in advance.
Sent from my SAMSUNG-SGH-I897 using XDA App

Give it a few days to let it dry out. Even take the cover, battery, sim, etc. out. Hit it with a blow dryer. Not super hot, but enough to help drive water out of the internal circuits. My fuze fully recovered after like 4 days. Worth a shot.
Sent from my SAMSUNG-SGH-I897 using XDA App

If you haven't already read this thread, I'd suggest you do. Same sort of thing happened here.
http://forum.xda-developers.com/showthread.php?t=807606

Quick story, and then a possible solution.
2 years ago I was sitting on the toilet with my iTouch playing Crash Kart Racing. I stood up to finish my business, put my iTouch in my hoodie pocket and leaned over the toilet to flush. *PLOP* Yupp, iTouch in the toilet. Luckily it was in clean water but it was still damaged.
The screen was effed and everything. So I figured I'd just let it dry out. Here's the solution part. Stick your phone into a back of rice. Not cooked rice, raw, hard, rice. Rice absorbs moisture, it acts like a natural silica gel, you know, those packets you get in your shoe boxes. Let it sit for a few days and hopefully all will be well again.
Epilogue..... I still bought a new iTouch cause my battery wound up not lasting very long after that...

Related

After tilt was washed in landry machine

Accidentally, I put my tilt with clothes into the washer when I was doing laundry yesterday. Yeah, it does look much cleaner after one hour's wash with detergent, but I couldn't start it any more. After one day baking on top of the monitor, it was able to boot up, but the device will automatically shut off after showing the message " Sim Door is unlocked and the device will shut down in 10 seconds". I've checked the door, locked and unlocked it, but it doesn't work. Liquid has caused a short?
By the way, the warranty has expired, so I have to fix it all by myself. Would appreciate any suggestions
rubbing alcohol and toothbrush try cleaning the guts
Warranty would't cover this anyway. I'd eBay it as "for parts only" and buy something else. Good luck.
Most cell phones as I understand from a tech...they have "indicators" like small dots for example that change color when introduced to liquid. Quick way to say no to the customer in regards to warranty.
UR2L8 said:
Most cell phones as I understand from a tech...they have "indicators" like small dots for example that change color when introduced to liquid. Quick way to say no to the customer in regards to warranty.
Click to expand...
Click to collapse
They're called Liquid Damage Indicators (LDIs). They're behind the battery on pretty much every phone.
Friend of mine laundered her Treo. She let it air out on a windowsill for a week.
She let it sit on a couple of silicone packets she had from a camera box.
(Water WILL evaporate, but soap will NOT. I hope it is rinsed.)
It works fine now. Hope this helps.
zhiheng said:
Accidentally, I put my tilt with clothes into the washer when I was doing laundry yesterday. Yeah, it does look much cleaner after one hour's wash with detergent, but I couldn't start it any more. After one day baking on top of the monitor, it was able to boot up, but the device will automatically shut off after showing the message " Sim Door is unlocked and the device will shut down in 10 seconds". I've checked the door, locked and unlocked it, but it doesn't work. Liquid has caused a short?
By the way, the warranty has expired, so I have to fix it all by myself. Would appreciate any suggestions
Click to expand...
Click to collapse
Clean it with alcohol and toothbrush as GuySparkz said.
Best to use is isopropylalcohol, if not in specialized electro shop, you still can get it in pharmacy shop. but it will still not dissolve all parts of soap. You should use demineralised water for this, from gas station. yes water. then alcohol. demineralised water act like sponge to minerals and stuff from soup and regular water.
dissasemble it completelly, bath mainboard in dem. water for an half hour, use toothbrash don't be shy with it, then bath in alcohol half hour, now use toothbrush VERY carefully, without too much power. It could tear smd's away.
you can put it to bath on top of working wash mashine to use vibrations from it.
after bath I am using pressed air to drain and blow away drops which still contain unwanted substance, don't use the one from gas station because it contains condensed air drops, better use straw and blow on it fastly.
use fan during your presence or beware of breathing fumes too much and don't let fumes go to your eyes too. it's irritating.
don't bath battery, LCD, cameras, vibra device, keyboard, speaker and mic. use just brush.
if water get in touch panel, you'll probably need to get a new one.
if battery will stop working in few days, you can open and bath board inside it.
now to just drying method. it's risky, water is not 100% conductive, but rust which will be created after few days is and that could finish it off.
I cleaned plenty of phones & cameras after my friends been rafting with them with 100% success. only one camera which had been only drained and used for another 2 days was really dead.
You may want to try taking the battery out and washing it again with rubbing alcohol. It may sound stupid but soap will conduct electricity as it is an electrolyte albeit a bad one i think, this could be causing the short especially when these devices use such low voltage. Get all the residue off and let it air dry I did it once before with my Blue Angel. Dropped it into a blue toilet when i was deployed and I did that and it worked. And before I get a comments from the peanut gallery... My phone was not sh*$y or blue or anything like that just a phone.
Thanks for all you guys. your suggestions really helps!
In fact, I was going to wash it by alcohol.
Anyway, just want to try one more time before I open it.
It does boot up today W/O any error message, even though you still can see some weird areas on the screen.
It is really amazing!
Just to be safe, currently it was sitting in a big bottle of CaSO4 (moisture absorber), hopefully it can be fully cured.
zhiheng said:
Thanks for all you guys. your suggestions really helps!
In fact, I was going to wash it by alcohol.
Anyway, just want to try one more time before I open it.
It does boot up today W/O any error message, even though you still can see some weird areas on the screen.
It is really amazing!
Just to be safe, currently it was sitting in a big bottle of CaSO4 (moisture absorber), hopefully it can be fully cured.
Click to expand...
Click to collapse
One of the reason why using alcohol to clean is good is because it will evaporate itself (and whatever liquid or dust it mixed with) almost instantly when you apply on the surface. It's the best cleaning solvent.
This may also help you for your screen problem: http://www.dealextreme.com/details.dx/sku.14919
After rinsing pack it in white rice for several days, it will suck out all the moisture.
JohnnyGTO said:
After rinsing pack it in white rice for several days, it will suck out all the moisture.
Click to expand...
Click to collapse
very good advice
joihan777 said:
Friend of mine laundered her Treo. She let it air out on a windowsill for a week.
She let it sit on a couple of silicone packets she had from a camera box.
(Water WILL evaporate, but soap will NOT. I hope it is rinsed.)
It works fine now. Hope this helps.
Click to expand...
Click to collapse
The Treo seems to fair exceptionally well in regards to water damage. My father flushed his twice, both times he had to remove the toilet to retrieve it. He placed it overnight in front of an air vent and it worked flawlessly afterward and has been working for 6 months since it happened.

[HELP] droped my diamond in toilet

heya guys,
today I was talking on the phone and the phone droped from my hand into toilet. I bring it out fast and removed the battery. I dont know what should I do now,. any advice!!!! will Vodafone accept it for waranty!!!
Usually for any electronic device, take as many bits out as you can an stick it somewhere warm for a day or 2, should get some if not all functionality back, I've dropped many things in the bath and had them back working again. Don't, however, try and power it on until it's had chance to dry out. The touch screen may be an issue though...not dropped any touch device in some water yet to test if the same rules apply....
Stick it in a bowl of (uncooked) rice, it'll help pull out the water faster.
whatever u do dont use any thing like a fan or blow dryer, cause that will just cause the water to go deeper into the phone, use a vaccum to suck the water out as much as possable,then like he said place the phone in a bowl of un-cooked rice for a day or two, good luck.
A little combo of what has been said: put it in a bowl of uncooked rice right at the counter where it gets a lot of sun (battery should be out obviously). The BIGGEST mistake you can do is test it out after a day when you "think" all the water is out. If it isn't and you turn it on, it could cause further damage. I know you're urgent to find out if it works or not, but give it three days with three days in the above conditions. You'll also probably need a new battery.
mp.goldfinger
will Vodafone accept it for waranty!!! - - -- no
Vodafone will not accept phone Warranty
The diamond has a sensor for water
Thanx guys......but I did turn it on today Bcause I really need a number everything is alright but the screens is still fuzzy. I wont use it for at least a week and see what will happend.
i hope you flushed the toilet before you dropped it.. =) otherwise there will be some.. sh*t inside the phone and its not easy to clean
yeah, definitely make sure its in rice, and sunlight doesn't hurt..
And the moral of this story
Don't take your phone out of your pocket when in the toilet.
It's also unhygienic.
Take care of your phone and your phone will take care of you.
I went to a festival where I was so drunk that my diamond went out of my pocket when I got ready to sleep in my tent. And next morning I fond the phone in a little water pool inside the tent. But all the functions still work after I let the phone dry for 1 day.
Uncooked rice (as been mentioned before) is the best solution.
Take your time, as been said before, it will take a long time before all the moisture is out.
Nowadays the chips are very small, water easily lodges between the BGA balls, and it takes a while to evaporate.
just leave it for a week in the bowl of uncooked rice (preferably on a warm sunny place.)
Remove stylus, back cover & battery before sticking it into the bowl.
It's not under warranty: it has a moisture sensitive sticker which turns red when it was in contact with water.
Because it isn't under warranty, I personally would take the device apart, and dry the parts seperately, but that isn't very easy if you haven't done this sort of disassembling before.
Revert to this only if you have absolute confidence (and the service manual ).
Best of luck!
Please keep us posted.
EquinoXe
The problem is long term, the moisture will cause corrosion on the fine
PCB tracks etc. even after its dry, Best thing to do is pull the device appart as best u can get a tooth brush and a can of CRC CO CONTACT CLEANER
blue and white can @ any good electrical wholesaler. spray all the circtry and componets not the screen. and scrub with a tooth brush dont knock
off any small componets and then let dry for a day or 2 best bet is to use compressed air to blow off excess liquid spray from under the chips..
I am in electronic repair hope this helps
This happend to my LG 2 years ago ...into the LOO and i done the process above and its still working today the quicker u dry the water off initialy the better..
thanx guys.....unfortunately I have to buy a new LCD for my diamond as all water has gone inside the LCD and damaged the sheets inside the LCD. I have removed all parts and I am waiting for LCD delivery that cost me 40£
Aww, that is unfortunate..
Hope the LCD transplant will bring it back to life.
I had almost the same issue, but in my case, what I did was that I droped some alcohol inside the power button when I was trying to clean the screen with a tissue and some alcohol. Now the power button works in a faulty way and it tries to reboot every time I click on it. It's like the single click is always a double click on the power button. Any suggestion on how to fix it? This happened to me like 2 months ago and it is still like this.
djfuego said:
Don't take your phone out of your pocket when in the toilet.
It's also unhygienic.
Take care of your phone and your phone will take care of you.
Click to expand...
Click to collapse
I dropped an iphone inside the toilet. It rang I went to pickup and it slipped out of my hands.
Apple replaced it though. They didnt even test if it was water damage. LoL
....and I might also suggest that you don't eat the rice later!
Aww thats pretty sick
Have done the same thing, about 2-3 years ago (luckly not with my HTC TD)
All the advice above is right about drying it out, but the main issue you'll have is impurities in the water which, once the water has evaporated will leave residue. The worst is actually salts. These will dislodge components in the phone, and usually it'll never be the same again. Often the water gets under BGA components that arent encapsulated, or between pins of components, and once the water evaoprates the salt cyrstals left behind expand into those gaps.
You can wash the pcb in distilled water, or certain alcohol solutions - depending on what residue there actually is. If you use normal water you'll just make it worse, because that has impurities in it too.
You could have done the same with the touchscreen, but you would need to dismantle it.
Sometimes you get lucky and it all works ok for months.. lets hope you're lucky

Dropped Nexus One in a Glass of water. Help

I know, this is just extremely stupid of me to drop a $550 phone in water. Happened 12 hours ago.
I removed battery right away. The screen was on when I removed the phone from the glass, pretty much right away.
Left the phone overnight in the rice bucket. Then turned it on in the morning.
The phone powers up and everything, so far seems to work, including the speaker and ear piece (thats the side that dropped in water).
Make phone call, I can hear and other person can hear. Wifi seems to work. Screen scrolling and such works.
Only thing I am noticing right now is that the Lock Button seems to have itr own brain. It autopresses and "the power off" screen keeps coming on by itself. Also, pressing the Lock Button does not lock the phone anymore. All it does is brings me to the Power Off screen.
Any help? Should I just remove the battery and leave it in the rice bucket for maybe a few more days?
Thanks.
P.S: I am glad the phone still works, and I will give a lot of credit to BESTSKINSEVER full phone cover.
Let dry it some more without the battery.
Reminds me of the time I dropped my sony w810 in a tall glass of beer, Took me a few seconds to realize and get it out. Worked perfectly after drying.
What is the benefit of a rice bucket? I never heard of that being used to dry electronic devices before. I know one of my friends jumped into a pool with his old LG phone. He let it dry out for 24-36 hours and worked fine after that. He basically let it air dry.
bloke226 said:
What is the benefit of a rice bucket? I never heard of that being used to dry electronic devices before. I know one of my friends jumped into a pool with his old LG phone. He let it dry out for 24-36 hours and worked fine after that. He basically let it air dry.
Click to expand...
Click to collapse
Rice absorbs water, you see it in on the table in the salt in a restaurant to hold the salt dry so it won't stick togehter and won't come out
I am running the Rodriguez 2.2 Rom.
Anyways, all seems to work normal again. But, just to be on the safe side, I think I will leave it in the rice bucket a little more after I get home.
Btw, this morning, I was running the Signed FRF50 Modaco rom, then I did a full wipe and Nand Restore to the prior backup to Rod 2.2 Rom. No issues.
Wondering if the OLED screen on the Nexus One has anything to do with the screen "Still Fully Functional" compared to a normal LCD?
Thanks all for the response. Going to do just as you say.
Pics or it didn't happen!
Also, see if you can clean around the lock button with compressed air or blowing or something, having the battery cover removed. Might be a rice/dirt related problem.
my nexus one has been in the toilet, in the bath, and in a diet dr. pepper... bag of rice each time, and it's 100%, no humidity under the screen or anything..
ALL of the moisture stickers are triggered tho..
heh
Cubed Guru said:
I know, this is just extremely stupid of me to drop a $550 phone in water. Happened 12 hours ago.
I removed battery right away. The screen was on when I removed the phone from the glass, pretty much right away.
Left the phone overnight in the rice bucket. Then turned it on in the morning.
The phone powers up and everything, so far seems to work, including the speaker and ear piece (thats the side that dropped in water).
Make phone call, I can hear and other person can hear. Wifi seems to work. Screen scrolling and such works.
Only thing I am noticing right now is that the Lock Button seems to have itr own brain. It autopresses and "the power off" screen keeps coming on by itself. Also, pressing the Lock Button does not lock the phone anymore. All it does is brings me to the Power Off screen.
Any help? Should I just remove the battery and leave it in the rice bucket for maybe a few more days?
Thanks.
P.S: I am glad the phone still works, and I will give a lot of credit to BESTSKINSEVER full phone cover.
Click to expand...
Click to collapse
Dropped my phone in a pool, its still working fine. If you have problems with your lock button, oh well. Install Cyanogen and use the trackball awake setting.
i hope you put the phone in a bag of rice immediately!! that greawtly increases your chance of a working device. i've had this happen many times where i save a phone using this method. the rice absorbs moisture very quickly.
jaapschaap said:
Rice absorbs water, you see it in on the table in the salt in a restaurant to hold the salt dry so it won't stick togehter and won't come out
Click to expand...
Click to collapse
Silicia gel works even better. I keep a big bag of it in my safe to keep the moisture away from my gun.
BootsSiR said:
Silicia gel works even better. I keep a big bag of it in my safe to keep the moisture away from my gun.
Click to expand...
Click to collapse
Submerging your phone in Silica gel is probably as inadvisable as in water, though
bcpk said:
Submerging your phone in Silica gel is probably as inadvisable as in water, though
Click to expand...
Click to collapse
I'm certain he would mean beads, not necessarily in a fluid-form
I was thinking more of the powder sachets that you get in dried seaweed packets. Not sure exposing your phone to silicate beads is a great idea either, since it's a skin irritant.
The screen is pretty much sealed off. So i guess when water gets INTO your screen behind the glass you are pretty fecked..
put it in dry rice!! works 10/10 times for me.
Was on the phone after I had shoulder surgery with headset on. I had my N1 resting in my sling. Went to the sink to wash a cup, my N1 slid out and went straight to the drain were water ran on it for a few seconds. I left it in a sealed tupperware box with rice in it for 24hrs... Works like a charm
Cubed Guru said:
I know, this is just extremely stupid of me to drop a $550 phone in water. Happened 12 hours ago.
I removed battery right away. The screen was on when I removed the phone from the glass, pretty much right away.
Left the phone overnight in the rice bucket. Then turned it on in the morning.
The phone powers up and everything, so far seems to work, including the speaker and ear piece (thats the side that dropped in water).
Make phone call, I can hear and other person can hear. Wifi seems to work. Screen scrolling and such works.
Only thing I am noticing right now is that the Lock Button seems to have itr own brain. It autopresses and "the power off" screen keeps coming on by itself. Also, pressing the Lock Button does not lock the phone anymore. All it does is brings me to the Power Off screen.
Any help? Should I just remove the battery and leave it in the rice bucket for maybe a few more days?
Thanks.
P.S: I am glad the phone still works, and I will give a lot of credit to BESTSKINSEVER full phone cover.
Click to expand...
Click to collapse
Was it a glass of tap water or some sort of bottled water (distilled/filtered)?
I ask because tap water has all sorts of chemicals and when it drys, they are left behind. Like your shower gets that white build up on the walls (aka hard-water buildup) unless your doing the hanky panky in the shower and not cleaning up your mess. Whatever electronic board is near the power button could have a bridge residue causing it to act strange.
My girlfriend left her G1 out and my 2 year old son dropped in the dogs water bowl. I dried it out and left it in rice as well for 24 hours. 24 hours later I powered it up and the phone would act weird. Random keys being pressed. Random menu pop ups. I took it all apart and noticed white residue on some of the circuit boards. I cleaned them with rubbing alcohol and a soft mini tooth brush it stopped the randomness but I still needed to replace the LCD screen. Beyond my control.
Anyways good luck.
Sindroid said:
The screen is pretty much sealed off. So i guess when water gets INTO your screen behind the glass you are pretty fecked..
Click to expand...
Click to collapse
I can attest to this. I spilled coffee over the entire screen one morning. I swear I moved faster than the flash cuz I grabbed tissue and wiped it clean in like seconds. But everything was still fine and dandy after though. =)
You guys have such bad luck! :O Never dropped any electronic in any body of water lol. XD
Sistum Id said:
Was it a glass of tap water or some sort of bottled water (distilled/filtered)?
I ask because tap water has all sorts of chemicals and when it drys, they are left behind. Like your shower gets that white build up on the walls (aka hard-water buildup) unless your doing the hanky panky in the shower and not cleaning up your mess. Whatever electronic board is near the power button could have a bridge residue causing it to act strange.
My girlfriend left her G1 out and my 2 year old son dropped in the dogs water bowl. I dried it out and left it in rice as well for 24 hours. 24 hours later I powered it up and the phone would act weird. Random keys being pressed. Random menu pop ups. I took it all apart and noticed white residue on some of the circuit boards. I cleaned them with rubbing alcohol and a soft mini tooth brush it stopped the randomness but I still needed to replace the LCD screen. Beyond my control.
Anyways good luck.
Click to expand...
Click to collapse
I highly doubt that he was drinking a glass of distiled water. Drinking distiled water is not good for someone to drink. So more than likely it was tap/drinking water.

[Q] Tab won't turn on-possible water damage. Any hope?!

Hi everyone,
My little sister accidentally dropped my 2-week old Galaxy Tab. I bought the Tab from someone on craigslist so I don't have a receipt or anything which I guess means I won't even be able to try getting it replaced or fixed by Samsung.
I searched the web and didn't find any info from anyone with similar problem so I don't even know if there is anything I can try or where to start.
The Tab itself appears fine physically, the screen did not even crack, but I cannot get it to power on.
Any advice, guidance, tips, tricks?! Anything at all will be greatly appreciated.
Keeping my fingers crossed...thanks for your time.
I think your only hope is to open the tab, to see if something get loose (battery etc...)
Sent from my GT-P1000 using XDA App
ok so I just pried the tablet open to check if battery was loose as you suggested and found something very interesting - nothing appeared loose but i noticed some small drops of water so i think the kid might have actually spilled something on my tablet (instead of or aside from dropping it)!
Now what?! Any advice on possible water damage? Is this irreparable?
if you're sure its water dmg, you could try putting the tab in a bag of rice for a couple days to dry it out, then try again to turn it on.
Other than that i guess you could look on ebay for a replacement part what you expect was water damaged...
Unfortunately for you a tab can be under water or under warranty but not both, and dropped tab=dropped warranty. The good news there is that you could still probably contact samsung to get a quote for fixing it. Its not a warranty repair so you'd be paying them either way.
edit: and if you've already pried it open and can remove the battery while drying it out - i'd do that. If it shorted it could start bulging or something and cause more damage. I second the let it dry in rice or even air dry for a while. Then if there is no sign of battery damage, charge it for a bit (keeping an eye on it for shorts) and see if you get the charging screen or if it powers on.
I have dropped many phone in water over the years. In fact i dropped my tab in my pets water dish.
If you havent damaged it beyind repair by opening it, my fix is to get a big ziplock bag, fill it with rice, bury the tab in the rice for a day. Leave in cabnet. Rice will suck all the moisture out.
Oh and by the way since you have it open, can you check what kind if internalbsd card it has? Does it look replaceable?
Hit the thanks button if I.have helped.
Sent from my GT-P1000 using XDA Premium App
ok I took it apart carefully following a tutorial vid on youtube. I cleaned what i'm assuming is liquid damage residue (white powdery substance?) with electronics cleaner and a qtip. Then buried it a container of rice and put it in a cabinet just as you guys suggested. Do you think 24 hours is enough time to let it sit before trying it?
I'm not sure how long the water was in there because there were only a few drops that hadn't dried and then the white powdery stuff which I assume is from the liquid. All info I came across gave procedures for treating electronics immediately after contact with liquid so not sure if this will work since it seems to have been sitting in there for a bit. I'm crossing my fingers and will post back.
sserpentine: what is an internalbsd? let me know what to look for and I'll take pics and post here for you
Lol, replacing the internal sd would be amazing! I can only imagine the possibilities.
Sent from my SGH-T959V using XDA Premium App
My niece put my tablet in the water what should I do

S Pen drop into water !!! Help solve

Hi guy, jusy now my S Pen accidentally drop into water, now the problem is the S Pen is very sensitive, when my S Pen haven't touch and far betwwen 0.3-0.4mm to the screen, the screen auto detect it and written...it is annoying~
Anyone have great solution to solve it?
Very appreciate your helping as well...
Tq
Sent from my GT-N7000 using XDA Premium App
Let the pen dry fully before using it on your Gnote
Try a hair dryer on low heat. I rescued a phone that had dropped in water that way!
Sent from my GT-N7000 using xda premium
be lucky that it wasnt the note itself wait and hope, or you need to buy a new one
leong19921992 said:
Hi guy, jusy now my S Pen accidentally drop into water, now the problem is the S Pen is very sensitive, when my S Pen haven't touch and far betwwen 0.3-0.4mm to the screen, the screen auto detect it and written...it is annoying~
Anyone have great solution to solve it?
Very appreciate your helping as well...
Tq
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
Grab a container and fill it half way with rice. Dried rice ... then put the pen in the middle of the container and fill it up to the top with dried rice. What happens is dried rice sucks out the moisture out of devices. My buddy fixed his IPhone this way. Hope this helps you. Make sure that the container doesn't have leaks otherwise rice sill absorb moisture out of the air instead of the pen.
Just buy a new one, if can afford to but the Note and Im sure 20 bucks is a bargain.
Colingajewski said:
Try a hair dryer on low heat. I rescued a phone that had dropped in water that way!
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
marlip said:
Grab a container and fill it half way with rice. Dried rice ... then put the pen in the middle of the container and fill it up to the top with dried rice. What happens is dried rice sucks out the moisture out of devices. My buddy fixed his IPhone this way. Hope this helps you. Make sure that the container doesn't have leaks otherwise rice sill absorb moisture out of the air instead of the pen.
Click to expand...
Click to collapse
blue ribbon for colin!!! great job and the right thing to do...a fan will work too in some cases...as long as its moving air it evaporates the liquid faster....
not so much for marlip... rice is 100% a myth.... and no i dont care what you have read, its wrong... if the rice is not touching the liquid it is not absorbing it... sure it picks up some evaporation as it evaporates on its own(no help from the rice i will add again) but it is doing nothing but getting rice dust in areas it doesnt need to be in... moving air people.... whether it is warm or just a fan...moving air will evaporate liquid faster than non moving air.... bag of rice =non moving air.... and again if the rice is not touching the liquid it is not absorbing it...just the normal evaporation that would happen in a container without the rice is all that is happening..
not looking for a fight just trying to help people fix things the right way... ive been repair tech for 20+ years and revived thousands of phones and revived thousands that werent revived by rice... so i do have a clue...
btw if itas a phone just drying it wont fix it...there will be corrosion on the board, and like rust corrosion doesnt stop until you stop it...it may work for a while but it will start getting quirky and issues will arise so it needs cleaned and treated too...
I think i will have to agree... Air circulation will help much more than rice. I look back at my first mobile phones and remember how many of them got soaked and i had to unscrew them apart and just leave them in front of my "ULTIMATE HI-POWER USB FAN" live long nokia 3310
So my opinion bro just look for an s-pen dissasembly guide, follow it carefully, leave your s-pen in front of a fan and forget about rice... Just because ur phones made in asia dosent mean the regions main dish will fix its problems... Will be silly if i poured beer over my BMW's scratches to make em dissapear
Good luck with you s-pen mate!!! Hope to see you drawing in no time
Sent from my GT-N7000 using xda premium
Leong, I posted a long time ago about how to address a water incident. This is the best tried and true method :
If your phone gets dropped in water immediately remove from the water,
Remove the battery as quickly as possible Then
Dry off the best you can, if you can open the unit up (you have the skill to do so then do so)
Then immerse in 91% Iopropol Alcohol (200proof drinking alcohol is actually better but rarely can find reagent grade drinking alcohol)
The reason for doing this 1st is the water molecules bind to the alcohol which immediately limits the potential damage. Then, after a few minutes (3-15 min depending) then dry off with paper towels and q-tips the best you can and then
Either use a fan (hair dryer) on it for a time and then put in rice or Millet and leave for a day or 2. Then use the Hair dryer to blow off any dust. reassemble and test, most the time you will be successful, it all depends how bad the incident was and how fast you got the battery out of the phone.
This is the standard way of addressing a water incident in underwater photography. I have done this personally more times than I want to admit, I do underwater photography and you can imagine the panic you get when your $3000.00 camera /housing starts to get a leak in the ocean @ 90 feet underwater, worst part is salt water destroys the coating on your lenses, which is insult to injury.
Either way the important thing to to be patient and make sure it is totally dry (ergo 1-2 days) Also storing it in the grain is best @ 75-85 deg F doesn't need more heat just higher than the 60's deg
I know everyone always says OMG putting a electronic in Alcohol..... read up on the science/ chemistry... and you will find this is pretty normal thing as long as there is no battery or power source connected to the item.
Hope you fix it
leong19921992 said:
Hi guy, jusy now my S Pen accidentally drop into water, now the problem is the S Pen is very sensitive, when my S Pen haven't touch and far betwwen 0.3-0.4mm to the screen, the screen auto detect it and written...it is annoying~
Anyone have great solution to solve it?
Very appreciate your helping as well...
Tq
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
Can't we all just get along?
There is no constructive purpose for name calling, folks. kawgirlval69 stated in her post that she was not trying to argue with anyone, she was just trying to help. Nobody really cares what will or will not work in theory. As compelling as that science lesson was I always prefer real-world experience to theory.
Last night my SGN went swimming in the hot tub and my daughter told me to burry it in an airtight can of rice (which I did using silicone sealant). By the way, I was thinking the same thing another poster suggested (if only it was only the S-Pen that fell in!)... Anyway I quickly dove in head first after it (forgetting about the wireless headphones that were around my neck) and eventually emerged with the device, although not until after it had sunk all the way to the bottom! Immediately I ripped off the back and pulled the battery, then shook as much water out of all the ports as I could. I used a hand dryer for once over but knew that wouldn't help with any of the water deep inside the device so I took my daughter's advice and buried it inside a sealed can of rice for 18 hours. I would have disassembled the device immediately but I had time constraints due to work obligations so I hoped that the rice would do it's job.
The first chance I got this afternoon I pulled my phone out of the rice and took it apart. There was water EVERYWHERE inside -- big puddles in every nook and cranny! In fairness I can't say if there would have been more or less water at that point without the rice, but that is all academic considering the fact that leaving ANY standing water on electronic components for that much time is a bad idea due to the corrosion factor that another poster mentioned, corrosion I noticed already developing on a few metal brackets and such.
After complete disassembly and thorough drying (with said hand dryer) of each individual part I cleaned the slightly corroded areas and put the device back together. I fired it up no more than an hour ago and so far everything seems to work fine.
As for the S-pen, if there's a way to disassemble it and thoroughly dry it by hand I would do that, or just wait for it to dry on its own which may take several days. As yet another poster suggested it might be worth it just to buy a new one if you can't get that one working... and just be glad it wasn't your phone you dunked!
Oh, and if any are curious, I may have saved my phone but my wireless headphones didn't make it (sniff).
[edit] Apparently the name-calling post was removed? Anyway I appreciate Oka1's reply -- I didn't even think about using alcohol but that's actually a great idea! A bit too late for me now but I'll have to remember that for next time.
@ oka... good way to do it... just a tip from experience.. you dont need the millet or rice after... air dry or fan or etc... overnite will evaporate everything doing things as you described... just saving a step....
@ajax... thank you for actually reading what i wrote.. thanks for having my back...
kawgirlval69 said:
blue ribbon for colin!!! great job and the right thing to do...a fan will work too in some cases...as long as its moving air it evaporates the liquid faster....
not so much for marlip... rice is 100% a myth.... and no i dont care what you have read, its wrong... if the rice is not touching the liquid it is not absorbing it... sure it picks up some evaporation as it evaporates on its own(no help from the rice i will add again) but it is doing nothing but getting rice dust in areas it doesnt need to be in... moving air people.... whether it is warm or just a fan...moving air will evaporate liquid faster than non moving air.... bag of rice =non moving air.... and again if the rice is not touching the liquid it is not absorbing it...just the normal evaporation that would happen in a container without the rice is all that is happening..
not looking for a fight just trying to help people fix things the right way... ive been repair tech for 20+ years and revived thousands of phones and revived thousands that werent revived by rice... so i do have a clue...
btw if itas a phone just drying it wont fix it...there will be corrosion on the board, and like rust corrosion doesnt stop until you stop it...it may work for a while but it will start getting quirky and issues will arise so it needs cleaned and treated too...
Click to expand...
Click to collapse
I know that this thread is a little long in the tooth, but I thought I might add this: a mom and pop company called CPR+ (cell phone rescue) uses the following protocol to repair water damaged phones:
1: Place the phone in a hermetically sealed container with long grain brown rice: the atmospherics inside will naturally pull moisture from the device into the drier air in the container.
2: Replace corroded parts and hip joints on the logic board, and glue.
The rice doesn't work because its rice...it works only when placed in a sealed container by transferring moisture from the device to the air in the container. The rice is there to absorb water from the atmosphere...not the device directly. A zip local bag will work too.
A friend of mine is a son of the family who owned the store. He also made a living for two years buying water damaged iPhones and reselling them after using the rice method.
I've saved two of my phones, my fathers phone, and my cousins Droid this way. So far I'm 4-0. Three out of four of those devices, others tried using a hair dryer, a fan, and just leaving them out for 3 days-- 7 in the case of my dads Motorola Tundra. The Tundra wound up with a seeping battery after a hair dryer was brought to it. In most cases I'd just buy a new battery, regardless.
3 days in a zip lock bag--untouched for the whole period, ressurected one phone after the first try, and the other 3 phones after other methods were tried.
As good as anecdotal evidence gets without a double blind test, dontcha think?
The pens are actually very resilient. I had an accident involving my pen and the toilet (don't ask), by necessity I immersed the whole pen in a cup full of regular alcohol, wrapped it in a tissue paper for a while to let it dry, and it works just fine. I had to immerse it several times in alcohol before I felt somewhat comfortable with using it again.
I left my wife's iPhone in a bag of rice on a mildly warm radiator for 2 days. It worked.
However, using a hairdryer seems to make a lot of sense. You want to get rid of the water asap. Not leave it slowly evaporate like I did.
Sent from my GT-N7000 using Tapatalk 2
Just buy a new one buddys
I droped an old nokia in water once.
i followed the same procedure of immidiately removing from water and removing the battery as soon as i could.
Then I just took the entire thing apart and wiped it clean with tissues. Then i just kept it in the sum for abot 15 mins (depends on how strong the sun is). once every thing was dry and seems to be properly cleaned. I just took some rubbing alcohol and cleaned it once again. Dats it.
Assembled every thing and voila!! :fingers-crossed: every thing worked. Not sure how advisable it is to keep electronic components in the sun, but it worked well for me.
---------- Post added at 11:02 PM ---------- Previous post was at 10:31 PM ----------
Hope this helps someone in need :fingers-crossed:
Well, the S-pen from my Note 10.1 in 2014 not only fell in the water, as it was washed along with clothing. Once you find it inside the machine, to shake to get the water with soap and became a wash in running water. After this, I used a blow dryer for a few minutes and let her into the compartment in the Note for 2 days. After this, the pen started functioning normally ... would be lucky? rs
leong19921992 said:
Hi guy, jusy now my S Pen accidentally drop into water, now the problem is the S Pen is very sensitive, when my S Pen haven't touch and far betwwen 0.3-0.4mm to the screen, the screen auto detect it and written...it is annoying~
Anyone have great solution to solve it?
Very appreciate your helping as well...
Tq
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
I am your first thanker. However, that is weird.
I think that the water causes a short circuit in the pen which lets it think that there is pressure.

Categories

Resources