Hi,
I have a Blue-tooth hands-free set in my car.
I often need to walk away from my car during a phone call.
It also happens that I am a few yards/meters away from the car when I make or get a call. when this happens the audio goes to the BT headset, but I can't hear it or be heard because I'm not near it.
So how can I make an ongoing call move from the BT handsfree back to my phone?
It has to be done from the phone only. No pressing buttons on the headset itself etc. (as I explained, I might be far from the headset and the car may be locked, etc.)
ThanX in advance!
Related
I have searched and cant find any general way to switch a phone call on my BT handsfree back to my Tilt handset. For instance, if I try to leave my car after starting a call on my BT handsfree, I have to end the call and redial it away from the car. I wonder if anyone knows a way to toggle the BT signal back to the phone handset so that it no longer plays through the car system. but do not disconnect the call. Thanks very much!
Toggle Bluetooth during a call
pdafish said:
I have searched and cant find any general way to switch a phone call on my BT handsfree back to my Tilt handset. For instance, if I try to leave my car after starting a call on my BT handsfree, I have to end the call and redial it away from the car. I wonder if anyone knows a way to toggle the BT signal back to the phone handset so that it no longer plays through the car system. but do not disconnect the call. Thanks very much!
Click to expand...
Click to collapse
See this thread http://forum.xda-developers.com/showthread.php?t=321115 , post #4, for a small add-in to the phone menu that allows you to toggle bluetooth on and off while in a call. I've seen the website where this comes from, but can't remember or find it right now.
When in a call, goto Menu, there is an option to "Turn Hands-free Off".
Buy a decent carkit with this function. I have a bluetouch carkit and it has a button for private calls. So i can switch between the phone and the carkit.
cayotte said:
When in a call, goto Menu, there is an option to "Turn Hands-free Off".
Click to expand...
Click to collapse
Thats what I do!
Did you not notice it in the menu during a call?
Thanks very much
I appreciate the help - I am stuck with an internal BT system in my car that is vintage 2001 and has little flexibility - if I install a new unit, I loose teh system integration that was standard on the car.
I have searched and did not find the simple solution you all suggested - I am embarrassed that I missed the "turn-off hands free" option in Menu!! I will try this - hopefully it does not disconnect the call.
Thanks very much and happy holidays!
Hi,
I have a Blue-tooth hands-free set in my car.
Often I need to walk away from my car during a phone call.
It also happens that I am outside the car, a few yards/meters away from it when I make or get a call. when this happens the audio goes to the BT headset, but I can't hear it or be heard because I'm not near it.
So how can I make an ongoing call move from the BT headset back to my phone?
It has to be done from the phone only. No pressing buttons on the headset itself etc. (as I explained, I might be far from the headset and the car may be locked, etc.)
ThanX in advance!
OK this is a bit convoluted so please bare with me:
I have a motorola T605 installed, but do not have it hooked up to my car stereo. I use a 3.5mm cable from my Note 3 to my car stereo, and the T605 just for phone calls, BUT I do use the controls on the T605 to skip tracks.
The problem I have is it works great, until I make or receive a phone call, then the Bluetooth AVRCP profiles cease to work, and the volume keys, which were being used to skip tracks before the call, now only adjust the phone volume, and the T605 itself blinks Blue (indicating phone profile connected) instead of flashing yellow (indicating phone and media profiles connected) as it was before the phone call.
Once it happens the only way to restore it is to shut off the bluetooth car kit (ie turn my car off). Powering the bluetooth on the phone off/on does nothing, as when it reconnects it still only have the phone functionality.
When I look at the setting>Bluetooth menu on the Note, both before and after a call, it always says that both Phone and Media profiles are active and connected.
For the record I am using X-Note ROM.
Any suggestion? Thanks in advance everyone.
chris5h said:
OK this is a bit convoluted so please bare with me:
I have a motorola T605 installed, but do not have it hooked up to my car stereo. I use a 3.5mm cable from my Note 3 to my car stereo, and the T605 just for phone calls, BUT I do use the controls on the T605 to skip tracks.
The problem I have is it works great, until I make or receive a phone call, then the Bluetooth AVRCP profiles cease to work, and the volume keys, which were being used to skip tracks before the call, now only adjust the phone volume, and the T605 itself blinks Blue (indicating phone profile connected) instead of flashing yellow (indicating phone and media profiles connected) as it was before the phone call.
Once it happens the only way to restore it is to shut off the bluetooth car kit (ie turn my car off). Powering the bluetooth on the phone off/on does nothing, as when it reconnects it still only have the phone functionality.
When I look at the setting>Bluetooth menu on the Note, both before and after a call, it always says that both Phone and Media profiles are active and connected.
For the record I am using X-Note ROM.
Any suggestion? Thanks in advance everyone.
Click to expand...
Click to collapse
Ok so the moto T605 is connected via bluetooth, and under bluetooth settings both phone and media are checked correct? BUT your sending the media via 3.5mm jack. I hope I read what you wrote right. If I did, I think you need to UNcheck the media box in bluetooth settings and just have phone connected. This way the music will play via 3.5mm until the phone rings. Then it will mute the 3.5mm and you'll hear the phone call over bluetooth connection. Also since the T605 is still connected via bluetooth it should still change your tracks.
Try that or tell me I read the whole post wrong and we'll try a different scenario. lol
I think you misunderstand. The audio is playing fine out of the 3.5mm jack. My goal is to keep the AVRCP connected so I can use hte button on the bluetooth car kit to control the audio player functionality of note 3 when not on a call.
I upgraded to the Moto-X for the touchless controls as I commute to work and back on my motorbike and I was really unsatisfied with alternatives floating around to simulate touchless control.
Now when I am in my car and using my bluetooth headset the voice control works just fine, I can navigate, call and send quick messages no problem
But on my bike I use a Viper RSv-131 helmet which has bluetooth built in and I listen to local radio or music whilst I'm riding but my Moto-X does not respond when I cay Ok Google now or when I press the button on my helmet either I can answer incoming calls fine but thats it.
Does anyone else use a Moto-X on a motorcycle/motorbike or even a regular bicycle with bluetooth and do you have similar problems?
Have you tried Google>Settings>Voice>Bluetooth headset
Solutions Etcetera said:
Have you tried Google>Settings>Voice>Bluetooth headset
Click to expand...
Click to collapse
Thanks Etcetra, I have bluetooth headset option turned on and it works using my BT headset in the car.
My gut reaction is my car headset is a regular over the ear BT headset but my helmet is like BT stereo headphones with a microphone and so I think it's a different kind of BT but I'm not an expert.
Any advice would be welcome
Check to see which profiles are connected on each device by going into Bluetooth settings and tapping the little settings icon next to the connection.
My helmet comes up as BLINK II and is ticked for phone and media audio
dr_strangetrick said:
My helmet comes up as BLINK II and is ticked for phone and media audio
Click to expand...
Click to collapse
That's unfortunate as it suggests an incompatibility issue between the two. It should certainly work using the phone profile.
Check with the helmet maker... maybe they have a firmware update available.
Turned off media audio and just tried phone audio but still the same: (
I just got a 2017 honda crv lx. When im on the phone in the car i want it to be able to switch to my headset when i walk away then back to the car once i get back in. Maybe there is a tasker profile for this?
Also why does the HU need bluetooth when the phone is plugged in to usb? Is there any way to not use bluetooth but still use android auto?
I have had some issues man...not totally similar to you but this is my issue.
Every time I start my car, Bluetooth connects as it should because I may not want to use AA (Android Auto) and may want to just listen to radio :silly: . I can listen to music from my phone. I can make and receive calls with no issue. My only requirement is that I have to lower the volume of the phone ringer to silent or else I hear the screech of death from the phone speakers when a call comes in. Not the normal situation or ideal at all. Anyway, i have tried to find a way to 1-Delay the time it takes for AA to connect to the HU or 2-Have the Phone go into Do Not Disturb when connecting to the car. I have not figured out a way to do either.
Well, if I decide to use AA, and click on the image on my HU (JVC-KW-M740BT), the same happens....no calls can come in without some sort of loud noise from the Phone speakers. everything else works.
I am just at a loss as to how to automatically set up the silent ringer on my phone when connected. I have been trying to use Llamalab's Automate app....and i have gotten close but no cigar.
If anyone can contribute solutions, to your problem or mine, that would be great.
I had to put in my phone type and such...
Phone:Nexus 6P
Version:8.1 Stock
Car:2015 Toyota Camry SE
Head Unit:JVC-KW-M740BT