Database Develop

I Need Helping Making A Custom update.zip

So I guess my question is, "Can anyone help me?"
I used custom ringtones, and I don't like using them from the SD card, it creates lag, takes longer to load the ringtone, etc, so I keep them on my /system/media folder. Normally to accomplish this, when I install a new ROM update, I edit it and resign it, with my media folder, rather than the ROM's.
My predicament however, is that I don't know how to change the file structure for the update, I know there are files in the update that say, this and this folder exist, where this goes, etc. This is what I don't know how to do.
All I need the update to do is contain the media (/system/media) folder, so I can just add all my ringtones and notifications to this update, and flash it after I flash whatever update/rom, etc, instead of always having to be at my computer to create a custom version of every rom I use.
Could anyone please care to help? I'd be ever grateful.

You can use the attached file.
Just edit the files in the ROM
zip it
put the zipped ROM in the same folder as the attached files
run sign.bat
FLASH

ID# said:
You can use the attached file.
Just edit the files in the ROM
zip it
put the zipped ROM in the same folder as the attached files
run sign.bat
FLASH
Click to expand...
Click to collapse
is this just to be used for signing? i already know how to sign files. i need someone to edit w/e files are inside the rom that tell its structure (this folder exists, and gets flashed here, this folder goes here, etc). i cant just take a cm rom and delete everything i dont need then flash it. it will get errors in recovery.

Make a folder called media in the root of your update, and create the proper descending folders in media (i.e. audio/ringtones, etc). Place your notifications/ringtones/alarms etc in the proper folders. (I am sure you understand this already)
Open your update-script file for the update and add the line
Code:
copy_dir PACKAGE:media SYSTEM:media
That should do it.
Note that if in the update-script you already have an entire system folder being copied over via
Code:
copy_dir PACKAGE:system SYSTEM:
then you need only add the folder media to the folder /system in the update.

cloverdale said:
Make a folder called media in the root of your update, and create the proper descending folders in media (i.e. audio/ringtones, etc). Place your notifications/ringtones/alarms etc in the proper folders. (I am sure you understand this already)
Open your update-script file for the update and add the line
Code:
copy_dir PACKAGE:media SYSTEM:media
That should do it.
Note that if in the update-script you already have an entire system folder being copied over via
Code:
copy_dir PACKAGE:system SYSTEM:
then you need only add the folder media to the folder /system in the update.
Click to expand...
Click to collapse
Thanks man, but my buddy actually just helped me out with this, but yeah thats exactly what I needed to know. Thanks a ton mate

Signing a bootanimation.zip

Hi,
i want to have the stock bootanimation on my N1 which is running CM7 #96
I have this attached bootanimation and want to sign it, so that i can flash it.
I dont want to push it to system/app via rootexplorer and change permission and reboot anymore.
How do i do that? Or can somebody get it done for me?

It's a little more complicated than just signing it - in fact, you don't need to sign it, you need to create a flashable zip which will install the file.
I find the easiest way is to add the file to a gapps package in the right directory structure, so that everything gets flashed in a single zip. You would need to look at the install script in the gapps package, and make sure it first removes the existing animation, and then check to see if it installs the whole /system structure, or individual files. If it installs individual files, you will need to list your animation...

[Q]I9001 Battery mod

Hello everyone,
Can someone please inform and post a thread link of a battery mod that works on the i9001? By battery mod I mean small zip file that is installed from recovery and changes the stock battery meter

You can make it yourselt.
1. Use Root Explorer to get your framework-res.apk file
2. Go to http://uot.dakra.lt/ to customize it yourselt.
3. Go to http://forum.xda-developers.com/showthread.php?t=1253707 to download the Root-i9001-Signed.zip
4. Put the modified framework-res.apk in the above zip file and delete the unneeded files.
5. Update the updater-script file, resign the zip file.
6. Flash the zip file in recovery.
Do you like this one?

quest221 said:
You can make it yourselt.
1. Use Root Explorer to get your framework-res.apk file
2. Go to http://uot.dakra.lt/ to customize it yourselt.
3. Go to http://forum.xda-developers.com/showthread.php?t=1253707 to download the Root-i9001-Signed.zip
4. Put the modified framework-res.apk in the above zip file and delete the unneeded files.
5. Update the updater-script file, resign the zip file.
6. Flash the zip file in recovery.
Do you like this one?
Click to expand...
Click to collapse
If you use manveru0's kernal and recovery you can now flash the update files as they come from the kitchen

quest221 said:
You can make it yourselt.
1. Use Root Explorer to get your framework-res.apk file
2. Go to http://uot.dakra.lt/ to customize it yourselt.
3. Go to http://forum.xda-developers.com/showthread.php?t=1253707 to download the Root-i9001-Signed.zip
4. Put the modified framework-res.apk in the above zip file and delete the unneeded files.
5. Update the updater-script file, resign the zip file.
6. Flash the zip file in recovery.
Do you like this one?
Click to expand...
Click to collapse
Hmm... yes, nice, but I'm not in to designing things. I was looking for something that has been already created

what's the version of your Rom?

quest221 said:
what's the version of your Rom?
Click to expand...
Click to collapse
Firmware version : 2.3.4
baseband version I9001XXKP4
Kernel Version : [email protected] #7
Build Number : GINGERBREAD.XXKP4
I use Go launcher (from my opinion it's the best), if you think otherwise please post the better launcher, I am opened to experiment others.
Many thanks,
Ciprian

I don't have a I9001XXKP4 Rom in my hard drive. If you can send your your framework-res.apk, I can make one for you.

quest221 said:
I don't have a I9001XXKP4 Rom in my hard drive. If you can send your your framework-res.apk, I can make one for you.
Click to expand...
Click to collapse
I would like something like http://img225.imageshack.us/img225/9943/smoothbatt.png if it is possible.
I have attached framework-res.apk

opps a

hey guys!
just used this. twice great kitchen, really revamped some of the more boring icons on stock roms. thanks for the tip!!

1framework-res_I9001XXKP4_signed.zip is the file that I updated the updater-script so you can flash it in the in-build recovery.
1framework-res_I9001XXKP4_original_signed.zip is your original file. If there are any issues, you can flash it back in the in-build recovery.
How to:
Copy the zip file to the internal SD card, not the external one, go to recovery, flash it.

quest221 said:
1framework-res_I9001XXKP4_signed.zip is the file that I updated the updater-script so you can flash it in the in-build recovery.
1framework-res_I9001XXKP4_original_signed.zip is your original file. If there are any issues, you can flash it back in the in-build recovery.
How to:
Copy the zip file to the internal SD card, not the external one, go to recovery, flash it.
Click to expand...
Click to collapse
Thanks, exactly what I needed. I flashed it and all is ok

quest221 said:
1framework-res_I9001XXKP4_signed.zip is the file that I updated the updater-script so you can flash it in the in-build recovery.
1framework-res_I9001XXKP4_original_signed.zip is your original file. If there are any issues, you can flash it back in the in-build recovery.
How to:
Copy the zip file to the internal SD card, not the external one, go to recovery, flash it.
Click to expand...
Click to collapse
can i use it on 2.3.6 rom?

nope because you will end up in a bootloop by flashing this
its only for XXKP4

urm, Ive tried to do as you told in post number 2(by cooking it according to my own preference)
but my problem starts from step number 5
5. Update the updater-script file, resign the zip file.
Click to expand...
Click to collapse
I already received the cooked file
but I dont know how to change the update script and end up failing to update using the zip file.
can you please help me?
or link me to a place that really can help me to learn better on changing the update script.

try this one, I updated the updater-script, you can compare it with the one from kitchen.
PS: Forgot to update the update-binary file, now try the new one. It should work.

Thanks!!!! But I got an error that states
E:error in /tmp/sideload/package.zip
(status 2)
I wonder whats wrong.
looked in a thread
http://forum.xda-developers.com/showthread.php?t=1194245&page=3
and from what I understand it seems to be a problem with the update binary. But Im just an end user and this is too much for me.
anyway maybe Ill try to flash the cranium ROM and try to cook again a new one and use your update script.
cheers!!

Hi,
Is there any posibility to change framework-res.apk file without CWM? I don't want to instal CWM becouse of it has a problem with front side cam and I need this cam. It's can't be overwritten when the phone works. Maybe some adb and push command is possible.
Could you help me by describing the whole procedure? Sorry for my English.

@quest221
Can you maybe make one for Android 2.3.5 like the screenshot @ page 1?
I have baseband I9001XXKPF, Build XXKPG

I update the zip file with the new update-binary file.
Is there any posibility to change framework-res.apk file without CWM?
Click to expand...
Click to collapse
Yes, I just use the recovery from Samsung, not the third-party.
Check the post #2, that's the steps. Also replace the update-binary file with the one in my zip file.
Can you maybe make one for Android 2.3.5 like the screenshot @ page 1?
Click to expand...
Click to collapse
Upload your framework-res.apk file.

[Q] how to create cm7.2 odin flash fw

hi guys i am running cm7.2 nightly on my captivate and i want to create an odin flashable firmware of cm7.2 rom on windows xp for backup purpose please give me a full tutorial on doing this

I believe it isn't possible. I was asking around for ICS and from what i gathered it isn't.

Two things you could do.
1.download the newest nightly that you want to base it on.
2. Use Root Explorer and EXTRACT ALL.
3. Then go to the extracted folder for the nightly, and delete out the SYSTEM folder.
4.Now MAKE SURE you have your phone set up EXACTLY how you want it to look like. Reboot the phone once that is done.
5. Now with root explorer navigate to /system and long press on the system folder. Choose COPY
6. Navigate to the extracted folder (which should be like sdcard/speedsoftware/extracted OR something like that) and go into the folder where you deleted out SYSTEM folder earlier. Now long press and choose PASTE.
7. Back out until your back at the extracted folder name, long press on it and choose RENAME. Pick the name you want it to be. (I usually use something like: CM7.2RockRattRedRemixThemed02-10-2012).
8.Long press on the name again and choose ZIP THIS FOLDER.
9. GO TO ZIPPED FOLDER.
10. Move the zipped folder to your sdcard, reboot to recovery and flash it to make sure it works.
11. If it worked just copy or or move that .zip file to your computer for backup.
Or I can upload the one I have created so you can see it and test it out. I have made some other changes so it is partially already themed, has the theme chooser. apk File I use instead of the stock theme chooser .apks that come with the original cm7. I use zip themer to set up certain things so they are automatically themed when just flashing the build i created. Hope this helps you get an idea of a pretty bazsic way of making your own cwm flashable cm7 rom already personalized. Oh I also delete of some of the apps that come in cm7 and just put my own personal apps into the system folder so I already have them built in.
Sent From My KickAss ATT SGS2 SPORTING CM7

RockRatt said:
Two things you could do.
1.download the newest nightly that you want to base it on.
2. Use Root Explorer and EXTRACT ALL.
3. Then go to the extracted folder for the nightly, and delete out the SYSTEM folder.
4.Now MAKE SURE you have your phone set up EXACTLY how you want it to look like. Reboot the phone once that is done.
5. Now with root explorer navigate to /system and long press on the system folder. Choose COPY
6. Navigate to the extracted folder (which should be like sdcard/speedsoftware/extracted OR something like that) and go into the folder where you deleted out SYSTEM folder earlier. Now long press and choose PASTE.
7. Back out until your back at the extracted folder name, long press on it and choose RENAME. Pick the name you want it to be. (I usually use something like: CM7.2RockRattRedRemixThemed02-10-2012).
8.Long press on the name again and choose ZIP THIS FOLDER.
9. GO TO ZIPPED FOLDER.
10. Move the zipped folder to your sdcard, reboot to recovery and flash it to make sure it works.
11. If it worked just copy or or move that .zip file to your computer for backup
Click to expand...
Click to collapse
thanks for your effort and reply but i want to create odin flashable fw not cwm, i know how to create cwm flashable rom, but anyway thanks for your reply

You could DD'ing a back up of all partitions and then tar'ing it, then flashing it in ODIN

Aren't the partition blocks different on AOSP?

Yess, but you can look them up then dd them, and DL the pit with heimdall, and create an ODIN FW flasher

Boot.img vs zImage. Way around?

decompile the boot.img and grab the zImage from the decompiled boot.img

b-eock said:
You could DD'ing a back up of all partitions and then tar'ing it, then flashing it in ODIN
Click to expand...
Click to collapse
can you please tell me step by step tutorial, i also dont know about dd'ing and do not use heimdal so cannot create pit file

[Q] CWM Recovery: patching backups; updating CM

Some simple (I hope) questions. Let's say I do a full CWM backup and copy the complete backup directory to my desktop. If I now want to change something inside this backup can I simply change the relevant .tar.a file(s), write their new checksums into nandroid.md5, copy everything back to the sd card and expect the whole thing to work?
No 2: I have just let the HD+ update itself to cm-10.1.3-ovation (final) and all went swimmingly. However, I saw that the update is not done incrementally, instead the whole zip is downloaded and the /system tree simply overwritten with its contents. I had put some bits and pieces into /system/app and /system/bin and modified a few files inside of /system, all of which changes were of course gone. So a better update strategy might be to download any new version from the CM website to a desktop machine, patch the .zip file there and then have CWM install it. Can CWM install such an update file like any other .zip or is the update.zip route the correct way?
Or perhaps the best way to update in such a scenario is to download the .zip, sync it with an existing CWM backup (as in the first question) and restore the backup?!

If you get the md5 sum right editing the tar should work.
You can edit the downloaded zip before you flash it and it will still install. But editing after install is about the same amount of work.
What I used to do on the Nook Color was to modify the gapps zip to add the /system changes I wanted and then reflashed the gapps every time I flashed a new ROM. That way gapps were refreshed and the new changes were inserted in /system. Or, you could make your own zip to flash only your changes. The easiest way to make one is to edit the gapps zip to put your changes in and then delete the gapps files from the zip.
Do these zip changes with archive software without totally unzipping and rezipping.
Edit: Since some of my changes were modifications to build.prop, I developed a script to edit the new ROM's build.prop on the fly as part of the zip. That way build date, etc stayed right. If you want, I can use PM to send you a copy of my old edited gapps for you to study. However, since you are on CM10.1 stable, you will probably not be updating again.
Sent from my Nook HD+ running CM10.1 on emmc.

> If you get the md5 sum right editing the tar should work.
Okay, thanks for the confirmation.
> You can edit the downloaded zip before you flash it and it will still install.
But how do I trigger that install, once in CWM? That was my 2nd question.
> But editing after install is about the same amount of work.
Not in my case as I have a) no MTP and b) can easily auto-sync huge directory trees with a powerful command line tool.
I think the best way forward is to ignore the installing of new install .zips via CWM, however this is done. Instead I'll produce a nandroid-compatible backup directory and "restore" that.
Thanks again for your help.

TooMuchSloeGin said:
> If you get the md5 sum right editing the tar should work.
Okay, thanks for the confirmation.
> You can edit the downloaded zip before you flash it and it will still install.
But how do I trigger that install, once in CWM? That was my 2nd question.
> But editing after install is about the same amount of work.
Not in my case as I have a) no MTP and b) can easily auto-sync huge directory trees with a powerful command line tool.
I think the best way forward is to ignore the installing of new install .zips via CWM, however this is done. Instead I'll produce a nandroid-compatible backup directory and "restore" that.
Thanks again for your help.
Click to expand...
Click to collapse
You don't trigger it, you manually boot to CWM and manually install it. Go to install zip from SD and choose where you put it.
And by editing after install, I meant editing /system once it is installed on the Nook.
Sent from my Nook HD+ running CM10.1 on emmc.