I have used CM 5.0.7 but I found a few bugs, 1 is where my widgets disappear and I cant put them on the homescreen.
I am currently using Cannon complete eclair, but it is not letting me install swype.
Which of the new 2.1 ROMS are the best currently?
I in no way take credit for the work that has been done, only testing the mated files..credit goes to MASTER { Devs4Android} and eugene373 {xda-developers}
Ok, so I've been experimenting with axura 2.0.1 and this is what I got working...I'm still testing this but have been running for 4 hours now
I will not be held responsible for anything that happens to your phone as a result of your actions..
Backup all data/files/apps to be safe
Things needed*
Odin { http://forum.xda-developers.com/showpost.php?p=8863820&postcount=138 }
Eugene's 2.2 froyo odin package { http://forum.xda-developers.com/showthread.php?t=833024 }
Axura 2.0.1 rom {cant find link, heres Axura 2.0.2: http://forum.xda-developers.com/showthread.php?t=821468 }
eugene's a11/a12 kernel {link located further down in posting}
1. Odin with eugene's 2.2 froyo package
2. Boot back into recovery
3. Flash axura 2.0.1 rom (reboot)
4. Boot into recovery
5. Flash eugene's a12 "or" a11 kernel(reboot)
6.boot into recovery
7. set up lag fix, tweaks,etc to your desired settings..
8. reboot, it will go to a menu, i suggest using the first option to backup and restore!!
11.DONE!! Enjoy....
***UPDATE***
Ok, so i paired Axura 2.0.3 with #805 kernel and it runs flawlessly!!!
same method as before just a different kernal.. so for future reference when Axura 2.0.3 becomes available to everyone look back for this post{BOOKMARK ME!!]
UPDATE!!!
Axura 2.0.1 rom is the less glitchy..{just released 2.0.4 "early" with the fixes applied, flashing now}
the best kernel available as of now is Eugene's a12/a11 oc/uv!!! has all available lag fixes, tweaks, and misc stuff built into the recovery, and the voltage app allows adjustment in individual speeds!!
100mhz
200mhz
400mhz
800mhz
1000mhz
1200mhz
http://eb-productions.proboards.com/index.cgi?action=display&board=samsungsgs&thread=28&page=1
So has anybody tried this yet? I'm gonna start on the newly "early"release of Axura 2.0.3...
Sent from my SGH-T959 using XDA App
htcfresh said:
So has anybody tried this yet? I'm gonna start on the newly "early"release of Axura 2.0.3...
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
It just drives me nuts that these kernels add the I9000 splash screen - but the 800 series, on up to 805 if tweaked correctly work great.
htcfresh said:
I'm still tedting this but have been ring for 4 hours now
Click to expand...
Click to collapse
Not trying to be mean but what are you trying to say?
Works exactly as described!!
Confirmed working on Axura 2.0.2, using the OP exact instructions... Quadrant Score 2072, Linpack 16.777, the I9000 splash screen doesn't bother me, but to each his (or her) own.
Thanks for posting this... works beautifully!
~m00n
i think axura 2.0.1 runs pretty quick already, but I tried this out for fun. It runs even quicker now =D no problems so far.
@mesajoejoe
My bad, I meant to say "I've been running this for 4 hours"...
Sent from my SGH-T959 using XDA App
Axura 2.0.3 work in progress..
No problem peoples...my goal was to find a oc 1.2 ghz kernel that will work with axura roms...trial and error!
i have access to the early releases and will be working on Axura 2.0.3 so hopefully i will have something ready when it hits the public..thanks for the feedback people!!
Sent from my bad a$$ galaxy s...please excuse my swype
htcfresh said:
No problem peoples...my goal was to find a oc 1.2 ghz kernel that will work with axura roms...trial and error!
i have access to the early releases and will be working on Axura 2.0.3 so hopefully i will have something ready when it hits the public..thanks for the feedback people!!
Sent from my bad a$$ galaxy s...please excuse my swype
Click to expand...
Click to collapse
It would be awesome to get Eugene's latest kernel (#106) working on Axura. Eugene stated that it should work on other roms as long as you include the zImage (duh) and the /system/init.rc. Tried doing it with a flashable zip as well as flashing just the kernel and then using adb to push the init.rc but still couldn't get it to boot. Maybe a much more talented individual could get this set up working.
Is it possible to flash axura 2.03 and flash the kernel by using CW? I believe kernels can be induvidually flashed right without odin correct? Thanks.
htcfresh said:
1. Odin with eugene's 2.2 froyo package
2. Boot back into recovery
3. Flash axura 2.0.1 rom (reboot)
4. Boot into recovery
5. Flash eugene's#802 kernel(reboot)
6. Download oclf 2.0 from market
7. Install ext 2 tools
8. Restore boot image
9. Install 2.2+ lag fix(phone will reboot)
10. Change scheduler to your preference (not necessary)
11.DONE!! Enjoy....
Linpack average... 16.5
Quadrant average..2019
Click to expand...
Click to collapse
So I'm already on Axura, so I can just jump right to the flashing of eugenes kernel through cw recovery, correct? Don't get why I'd have to odin eugenes froyo package. I hate odin if you haven't guessed by now lol.
Also, which one is supposed to be better? 802 vs. 805
joe.kerwin said:
So I'm already on Axura, so I can just jump right to the flashing of eugenes kernel through cw recovery, correct? Don't get why I'd have to odin eugenes froyo package. I hate odin if you haven't guessed by now lol.
Also, which one is supposed to be better? 802 vs. 805
Click to expand...
Click to collapse
Yeh I hate odin also. I believe we should be able to flash in cw. I dont see why one would have to flash eugenes rom also. Im curious. Anyone care to expound. Thanks!
Correct...if your already on Axura your fine, except if you have any voodoo lag fix our oclf lag fix..you would have to remove them first...I personally like #802..but to each his own
Sent from my SGH-T959 using XDA App
jcc332006 said:
Is it possible to flash axura 2.03 and flash the kernel by using CW? I believe kernels can be induvidually flashed right without odin correct? Thanks.
Click to expand...
Click to collapse
Yes as long as it is a flashable .zip
Kernel and not made for odin..but thus far out of all the kernels eugene's #80x kernels are the only ones that work and are cwm flashable..
Sent from my bad a$$ galaxy s..please excuse my swype...
After I install the ext2 files, it says I already have a lagfix installed. I followed your procedure correctly but with Axura 2.0.3 and kernel #802.
I had voodoo installed before but I flashed disable-lagfix.zip before I did any of this.
Xencer said:
After I install the ext2 files, it says I already have a lagfix installed. I followed your procedure correctly but with Axura 2.0.3 and kernel #802.
I had voodoo installed before but I flashed disable-lagfix.zip before I did any of this.
Click to expand...
Click to collapse
did you restore boot image!?! if so i dont have an answer, other then odin and reinstall axura rom and this time use the newest working kernel, build a5 #120..links in the first post now..
Im getting reboot issues with the a5#120 kernel anyone else?
shaw89614 said:
Im getting reboot issues with the a5#120 kernel anyone else?
Click to expand...
Click to collapse
What kind of reboot issues? Were you running a rom other then axura when you flashed 2.0.3? Best bet is to odin and do it all fresh and only flash one at so time with reboots between flashes...and disable any lag fixes!!
Sent from my SGH-T959 using XDA App
How's the battery life on this?
802 gave good battery life with 2.0.3 for me
Is it just me or has the kernel manager quit working?
Luke
Some people were having problems with the kernel manager lite included in bamf 1.6.2 If that is what you are using try uninstalling it and reinstalling the market version. I would also suggest upgrading to kernel manager pro!
I recently rooted my NC to CM7 using the latest stable rom. While I was rooting it I forgot to download Dalingrin's (sp?p) So, I want to install it now. I dowloaded to file to my SD card, and I rebooted into recovery mode. Then I navigated to the file and opened it up and rebooted. Now for the stupid question; How do I know if it installed? I don't see any additional icons or anything. If it did work, how do I access the settings? The main thing I want it for is to fix the sound through the headphones and speaker.
Sent from my DROIDX using XDA App
Look at the performance settings, if you can oc to 1200, then you have the new kernel.
The "stock" cm7 is capped at 925.
Unless I'm wrong, I don't think the latest Dalingrin's OC kernel works with the Stable ROMs until 7.1 is released, right now it's only the nightlies.
See the pink text under Kernel Downloads:
http://forum.xda-developers.com/showthread.php?t=925451
I guess that explains why it didn't seem to do anything Thanks guys.
You could try flashing the older .29 kernel, I think that one works with the stable releases. Sorry, I didn't think of that earlier.
If I purchase the full (premium) version of ROM Manager will I be able to update from Cog4 to Cog5 through the app? Or is it always best to just wipe it and load the newest?
Just FYI I loaded my first and only ROM in Jan and haven't done anything since.....
No. And Cog 5 is close to be dead if not already. Sadly Desing Gears has moved on.
Edit: Also you need Gingerbread bootloaders to run ANY gingerbread rom except Cm7 and MIUI