Related
I've been looking through the forum and googleing for a while. I can't seem to find any herocimg.zip's. I need one of these because my HTC Hero will not boot past the HTC screen nor go past the bootloader into recovery. If you have any suggestions on how to fix that problem they would be apprecaited. As of the moment I've only BEEN ABLE TO clear user data from the bootloader.
Agentx002 said:
I've been looking through the forum and googleing for a while. I can't seem to find any herocimg.zip's. I need one of these because my HTC Hero will not boot past the HTC screen nor go past the bootloader into recovery. If you have any suggestions on how to fix that problem they would be apprecaited. As of the moment I've only BEEN ABLE TO clear user data from the bootloader.
Click to expand...
Click to collapse
it's spelled hercimg, maybe that's the issue.
what would you like to be in the hercimg?
you can ruu to 2.31.651.7 with this one http://forum.xda-developers.com/showpost.php?p=9944755&postcount=9
My Hero hangs at the HTC screen, so I figured I'd try another rom. Like I said, the phone won't go into recovery. Just the voldown+power screen.
You need an HERCIMG.zip with a recovery.img inside. It will only work if you're S-OFF.
BTW, HEROIMG.zip is for the GSM Hero, not the Sprint CDMA one. If you're not S-OFF you need to follow aiwetir's link to get back to stock, re-root, and reflash your recovery..
c00ller said:
You need an HERCIMG.zip with a recovery.img inside. It will only work if you're S-OFF.
BTW, HEROIMG.zip is for the GSM Hero, not the Sprint CDMA one. If you're not S-OFF you need to follow aiwetir's link to get back to stock, re-root, and reflash your recovery..
Click to expand...
Click to collapse
or flash a recovery through ADB.
I didn't know you could use adb from hboot. Good to know.
Hi all,
I am newbie in this foruma nd new in Android. I am going to get the Incredible S later this week. I would like to try to root the Incredible S. I read some of the treads, but I am a bit confuse here, hope someone can help me out. Here are my questions.
1) Can I root my phone with Unrevoked3 ? If so can I use the S-On tools to put it back to s-on for warranty ?
2) Before I do the root, I would like to backup my Rom. All I need to do is go to Hboot and choose backup. It will save my rom image right? If any bad thing happen, I can S-On than put it back my rom and everything will back to the factory setting ?
3)How would I know if my phone been rooted? I saw a thread said if there is an Icon (superuser) in the menu it means I am rooted?
I know these are stupid questions, hope someone can help me out in here.
Thanks in advance
wilson0917 said:
Hi all,
I am newbie in this foruma nd new in Android. I am going to get the Incredible S later this week. I would like to try to root the Incredible S. I read some of the treads, but I am a bit confuse here, hope someone can help me out. Here are my questions.
1) Can I root my phone with Unrevoked3 ? If so can I use the S-On tools to put it back to s-on for warranty ?
2) Before I do the root, I would like to backup my Rom. All I need to do is go to Hboot and choose backup. It will save my rom image right? If any bad thing happen, I can S-On than put it back my rom and everything will back to the factory setting ?
3)How would I know if my phone been rooted? I saw a thread said if there is an Icon (superuser) in the menu it means I am rooted?
I know these are stupid questions, hope someone can help me out in here.
Thanks in advance
Click to expand...
Click to collapse
1. No, Unrevoked3 does not work on the Incredible S. You need to use AlphaRev/Unrevoked Revolutionary (http://revolutionary.io/)
2. You need to have a custom recovery in place such as ClockworkMod to backup image of your ROM. Revolutionary has an option to install ClockworkMod during it's procedure. In order to restore the phone to factory settings, you need to make sure you have a RUU (Rom Update Utility) that matches your phone's version.
3. After you install ClockworkMod, you will need to manually root and add superuser to your phone. http://forum.xda-developers.com/showthread.php?t=1122694
Thank you very much for the reply. I will definately giong to give it a try. Another question here, after I applied Revolutionary and the phone will become S-off. And I want to put back the factory image back, will the phone switch back to S-ON ?? From other threads, I think it will void the warranty if the phone is S-ON
Thank you very much
You can put your phone back to S-ON yes. Make sure you haven't updated your phone to 2.30.405.1 or you can't root or S-OFF your device.
Great thanks. So here is my steps for turn the IncS to S-Off and backup right ?
First I will have to use Revolutionary to turn the S-OFF
than I will use ClockworkMOd to backup my factory ROM (just in case i need to turn it back to S-ON and factory setting for warranty)
Once I am S-OFF i will be able to use one of the image for Root
Thank you very much for all the helps guys. I will give it a try and see how it goes.
wilson0917 said:
Thank you very much for the reply. I will definately giong to give it a try. Another question here, after I applied Revolutionary and the phone will become S-off. And I want to put back the factory image back, will the phone switch back to S-ON ?? From other threads, I think it will void the warranty if the phone is S-ON
Thank you very much
Click to expand...
Click to collapse
You have to flash RUU according to your IS version. It does full restore your device to factory state. So yes it includes S-on and Htc official Rom so it would be just like when it came out of the box.
Edit: What's your software number? You may check at Settings / About phone. You need that to flash properly RUU to your device.
Sent from my HTC Incredible S using XDA App
Hi thiagofbrito, thanks for the reply. Sorry I don't have my INcS yet, still waiting for it, but I will check the software #.
By the way , if I used clockworkmod. I can backup my ROM right? So if anything happen can I use that backup and rest it as Factory Setting with S-ON ?
Don't really undersatnd what is the RUU use for?
Thanks
wilson0917 said:
Hi thiagofbrito, thanks for the reply. Sorry I don't have my INcS yet, still waiting for it, but I will check the software #.
By the way , if I used clockworkmod. I can backup my ROM right? So if anything happen can I use that backup and rest it as Factory Setting with S-ON ?
Don't really undersatnd what is the RUU use for?
Thanks
Click to expand...
Click to collapse
Not exactly. ClockworkMod backup and restore only saves and restores the whole ROM image, but not the SecurityFlag setting (S-OFF/S-ON), so restoring a CWM backup will not return you to S-ON state.
This is where the RUU comes into play. As long as you have the RUU for your particular phone and carrier, that is what you would use to return the phone to a full Factory Setting complete with S-ON. In the Development section there is a thread that has alot of the shipped RUUs for the IncS.
Sorry to tag onto this thread but 1 more question.....if the IS is already set up and now would like to get it rooted, following the procedure won't reset the device and clearing out the data right? I know using Unrevoked won't clear the data but not sure about this one. Kindly confirm
Scann69 said:
Sorry to tag onto this thread but 1 more question.....if the IS is already set up and now would like to get it rooted, following the procedure won't reset the device and clearing out the data right? I know using Unrevoked won't clear the data but not sure about this one. Kindly confirm
Click to expand...
Click to collapse
No, the S-OFF and rooting process will not wipe out your existing apps or data.
Hi, I just received my IS, the phone already S-OFF , android version 2.3.3 , but it has some app I don't want. I know that I need to rooted before I remove those, can I root this phone ? Or I need to follow the unrevoked 3 proceduce and flash the custom rom ?
Thanks
wilson0917 said:
Hi, I just received my IS, the phone already S-OFF , android version 2.3.3 , but it has some app I don't want. I know that I need to rooted before I remove those, can I root this phone ? Or I need to follow the unrevoked 3 proceduce and flash the custom rom ?
Thanks
Click to expand...
Click to collapse
Here is the procedure you should follow since you already have S-Off.
http://forum.xda-developers.com/showthread.php?t=1122694
Thanks tpbklake , I also download the RUU. which is 20.2805.30. Just incase I need the factory reset and I need to put back the RUU right, will it still S-OFF ?? Since my IS already S-OFF
Thanks
I read the forum, i am in HBOOT menu, but I don't see Fastboot USB
i saw Fastboot, than it load the SD image, i connect my phone to USB , but i don't see Fastboot USB mode , can someone help please ?
Thanks
wilson0917 said:
I read the forum, i am in HBOOT menu, but I don't see Fastboot USB
i saw Fastboot, than it load the SD image, i connect my phone to USB , but i don't see Fastboot USB mode , can someone help please ?
Thanks
Click to expand...
Click to collapse
You need to have the HTC drivers installed.
http://downloads.unrevoked.com/HTCDriver3.0.0.007.exe
I already did have the HTC driver installed. But when I boot the device in HBOOT, my PC wouldn't detect it right? or it suppose to detect it ? thanks
just tried again, now I can see the Fastboot USB, and when I do fastboot recovery (image) it showed writing recovery failed (remote not allowed)
is there something I missed ?
Thanks
wilson0917 said:
just tried again, now I can see the Fastboot USB, and when I do fastboot recovery (image) it showed writing recovery failed (remote not allowed)
is there something I missed ?
Thanks
Click to expand...
Click to collapse
No you haven't missed anything. The procedure instructions were for gaining S-Off using Revolutionary which installs a modified hboot that contains additional fast boot commands. So you must have a XTC clipped S-Off, so you simply need to install ClockworkMod by copying a PG32IMG.zip file to your SD card and letting the boot loader install it.
Shouldn't this be more like..
1. Download CMW's zip file (Available in this thread here)
2. Make sure the file is named "PG32IMG.zip" without quotes.
3. Put file in your SD card
4. Switch off phone
5. Pull out the battery and wait 5 seconds. Put the battery back in again. (This step is needed in case fast boot is enabled..)
6. Press vol down+power. HBoot (white screen with 3 android logos at the bottom) should load.
7. Wait a while.. it should pick up on your PG32IMG.zip automatically and install your custom recovery
8. Reboot into your OS and remove the zip
9. Go back into HBoot and then recovery. Use as you please (I suggest you take a backup first then proceed to flashing or doing anything else you might fancy )
Thanks for the reply. My HTC is not XTC cliped. I bought this at a retail store. When I checked the HBOOT is already S-OFF. So as you said, all I need to do is download the ClockMod and rename is as the zip file
Thanks
Hi tpbklake ,
Ok I tried to the instruction you provide earlier. I got the zip file, renamed and placed it on the SD card. HBOOT than I can see the HTC is saying Parsing the zip file, than i turn off the device and remove the Zip file from the SD card. And go back to HBOOT again choose recovery , and it show the red exclaimation mark . .. I don't know what happen in here, can someoen please help ?
Thanks
So far I've had no luck using custom ROMs as it just stays on the htc boot screen and does not work. I can confirm that 'MiUi' does work on my phone - however it is buggy and I don't like it.
I want cyanogenod or either android revolution HD but none of these work.
I thinkit has something to do with the HBOOT being 1.16.000, and the ROM version i'm after is 2.34.981.1 (virgin or optus branded) - am with virgin though in Australia.
I have a custom bootloader/recovery whatever you call it, I wipe the cache, dalvik cache and factory wipe, before installing all ROM's. I can't update to stock ROM either because there is none for hboot 1.16.000
So right now my phone is pretty much a paper weight until I can get it working again.
I prefer custom ROM's if there is any that work, if not I atleast want the stock ROM to work for now so I can use my phone. If someone can help me through the process to get it working it would be greatly appreciated. Thanks.
jakeyo said:
So far I've had no luck using custom ROMs as it just stays on the htc boot screen and does not work. I can confirm that 'MiUi' does work on my phone - however it is buggy and I don't like it.
I want cyanogenod or either android revolution HD but none of these work.
I thinkit has something to do with the HBOOT being 1.16.000, and the ROM version i'm after is 2.34.981.1 (virgin or optus branded) - am with virgin though in Australia.
I have a custom bootloader/recovery whatever you call it, I wipe the cache, dalvik cache and factory wipe, before installing all ROM's. I can't update to stock ROM either because there is none for hboot 1.16.000
So right now my phone is pretty much a paper weight until I can get it working again.
I prefer custom ROM's if there is any that work, if not I atleast want the stock ROM to work for now so I can use my phone. If someone can help me through the process to get it working it would be greatly appreciated. Thanks.
Click to expand...
Click to collapse
Hyun is looking for you at revolutionary irc channel.
Sent from my HTC Incredible S using Tapatalk
I know.. I have spoken to him.
jakeyo said:
I know.. I have spoken to him.
Click to expand...
Click to collapse
Any luck? still unable to flash anything?
jakeyo said:
So far I've had no luck using custom ROMs as it just stays on the htc boot screen and does not work. I can confirm that 'MiUi' does work on my phone - however it is buggy and I don't like it.
I want cyanogenod or either android revolution HD but none of these work.
I thinkit has something to do with the HBOOT being 1.16.000, and the ROM version i'm after is 2.34.981.1 (virgin or optus branded) - am with virgin though in Australia.
I have a custom bootloader/recovery whatever you call it, I wipe the cache, dalvik cache and factory wipe, before installing all ROM's. I can't update to stock ROM either because there is none for hboot 1.16.000
So right now my phone is pretty much a paper weight until I can get it working again.
I prefer custom ROM's if there is any that work, if not I atleast want the stock ROM to work for now so I can use my phone. If someone can help me through the process to get it working it would be greatly appreciated. Thanks.
Click to expand...
Click to collapse
If you go to the development section of the HTC Incredible 2 forum, attn1 has a script tool that uses the latest Revolutionary/Unreovked exploit to downgrade the ROMand HBOOT to a version that is supported by Revolutionary.
If you look at the script, it is pretty simple. You would just need to use an older Virgin Mobile RUU.zip instead of the Inc2 version. It looks like the 2.12.981.2 would be the one to try.
Hang on a second, how did you S-off the Hboot 1.16?
I thought you need S-off to be able to flash a custom Rom...
How did you install Miui?
Am I missing something here?
Doesnt matter if you need S-ON or S-OFF, as long as you get permissions to access root files.
Someone installed a custom bootloader so I can install custom ROM's, and it just works.... apparently the radios are locked though.
So, another day gone by and my phone is still not working. I can use MiUi, but I ran out of data on my 3g sim and wifi doesnt work, so now I have no internet on it.
katu2006 said:
Hang on a second, how did you S-off the Hboot 1.16?
I thought you need S-off to be able to flash a custom Rom...
How did you install Miui?
Am I missing something here?
Click to expand...
Click to collapse
I'm pretty sure no soff will cause the issues he is experiencing, though he doesn't seem to be listening
no, you're all just noobs.
It was the boot.img, we swapped it with the MiUi then put back the original one, now it boots up on cyanogenmod7.1 and works completely fine.
Can access root files, can take screenshots, everything is normal.
and I have s-on.
jakeyo said:
no, you're all just noobs.
It was the boot.img, we swapped it with the MiUi then put back the original one, now it boots up on cyanogenmod7.1 and works completely fine.
Can access root files, can take screenshots, everything is normal.
and I have s-on.
Click to expand...
Click to collapse
Yes im a noob that has been using android since 2009..
You seem like a supreme douche.
Weren't you the one who was crying about wanting to go back to his iphone lol
jakeyo said:
no, you're all just noobs.
It was the boot.img, we swapped it with the MiUi then put back the original one, now it boots up on cyanogenmod7.1 and works completely fine.
Can access root files, can take screenshots, everything is normal.
and I have s-on.
Click to expand...
Click to collapse
You're calling us noobs, but you don't even know what was done on your phone...
What's the following sentence supposed to say?
"It was the boot.img, we swapped it with the MiUi then put back the original one"
To get a custom Rom, you actually have to INSTALL it...To get the custom Rom installed, you need CWM recovery. But if you have HBoot 1.16.000, you can't have a custom recovery yet.
In less your "friend" did a downgrade of the HBoot to 1.13.000, it's unlikely that you have CWM recovery on your phone. Even so, to my knowledge HBoot 1.16.000 does a version check and won't let you downgrade it.
So, the question remains, how did you get CWM recovery on your phone?
katu2006 said:
You're calling us noobs, but you don't even know what was done on your phone...
What's the following sentence supposed to say?
"It was the boot.img, we swapped it with the MiUi then put back the original one"
To get a custom Rom, you actually have to INSTALL it...To get the custom Rom installed, you need CWM recovery. But if you have HBoot 1.16.000, you can't have a custom recovery yet.
In less your "friend" did a downgrade of the HBoot to 1.13.000, it's unlikely that you have CWM recovery on your phone. Even so, to my knowledge HBoot 1.16.000 does a version check and won't let you downgrade it.
So, the question remains, how did you get CWM recovery on your phone?
Click to expand...
Click to collapse
This thread is awesome
no, if I hold down power down and power button I see S-ON and HBOOT 1.16.0000
He typed in commands to give it root permissions, not sure exactly as he remote controlled my computer and typed it in. Then yes, he flashes CWM onto the phone then I installed revolutionary.
Firstly, I went onto the HTC dev site (created an account) and followed the steps to unlock the bootloader. In the end, it was successful, and once it's finished it will wipe the phone (AND WILL STILL SAY s-on)
So then the bootloader is now unlocked, and he did various commands in fastboot. My guess is that he installed CWM from there and it just worked.
at first, cyanogenmod would not boot, so he copied the (boot.img that is working) from MiUi and repled it with cyanogenmod's. The phone booted up and worked. Then he put it back how it was and it now works. Strange, but something must've given it a kick.
I'll repeat myself.
HBOOT 1.16.0000
S-ON
Cyanogenmod &.1 (stable)
Full root access
Need I say more to prove it?
As far as I know, I just cannot flash radios, which actually require the S-OFF....
sorry if I come across as rude, just a long day..
Talk to aftab565 he has the same hboot as you and has arhd running. Sounds like your phone was temp rooted and flashed and I would advise against letting people you don't know take remote access of your pc.
Hopefully it works for him I couldn't help.
Just replied to his thread.
And I know I was aware. I had full control though (could press a certain key to disconnect the connection - and only gave a temporary password) He was only typing in CMD things to do with the phone that I've heard of before
(ADB shell, fastboot recovery etc) and in the end worked well. He said my job is done and disconnect himself, so good guy
Didn't take my eyes off the screen either.
jakeyo said:
Just replied to his thread.
And I know I was aware. I had full control though (could press a certain key to disconnect the connection - and only gave a temporary password) He was only typing in CMD things to do with the phone that I've heard of before
(ADB shell, fastboot recovery etc) and in the end worked well. He said my job is done and disconnect himself, so good guy
Click to expand...
Click to collapse
You gotta give props to these guys for donating their time. Every day there's more talk about h-boot 1.16.0000 so I figure if devs want to keep devin there'll be a rev released eventually.
I really appreciate the amount of work hes done, in total I recon he's spent about 6 hours trying to help me getting it to work.
Never left me by myself, he always helped me through every step and was always there if I needed help. I've now got CM7 thanks to him. If he didn't fix it, I would have a useless phone because I couldn't even put on the stock ROM because of my HBOOT im guessing (I did an OTA update to get 1.16.0000 therefore too new to download)
I think SOME of the custom roms do have support for 1.16.0000 and what you only need is the boot file from them to boot up your non-booting ROM then you're all good.
ok, just to put some closure and sanity on this thread.
Firstly I'm probably bettery know as hyuh on #revolutionary, and it was me who was connected to his PC.
I use teamviewer to connect to people remotely, this allows anyone who doesn't like the look of *anything* I do to diconnect me...The user in front of the PC has full control of my session and I remind them to close teamviewer after we're done.
Secondly to those who think you need to be S-OFF to install a custom ROM or custom recovery, this is simply not true in the case of the 1.16 hboot. If you follow the HTC unlock procedure then you will have sufficient access to the phone to do this, it is not S-OFF just an unlock. Your phone will be in state "S-ON unlocked" This allows certain partitions on the emmc to be written to, and this sufficient for custom ROMs.
Really all that is requird is:
Code:
fastboot flash recovery <recovery.img>
then follow the normal flashing procedures.
In jakeyo's case CM7 would not boot, but MIUI would. When I say it would not boot I do not mean a boot loop here, I mean no boot period. At this point I had expected to need to rebuild a boot image for CM7 for him suspecting that HTC had done something different in the new hboot with paritions or the boot image offset.
The reason for flashing the MIUI boot image on top of CM7 was simple, to get to adb in the boot image. However seeing nothing particularly strange in the boot sequence ( other than the mismatch and resulting bootloop) I decided to reflash the CM7 boot image through fastboot.
The phone booted fully this time without issues.
It appears that the boot image simply did not flash properly from recovery the first time but I don't have a vivo to troubleshoot further.
A couple of things:
1. Don't take the OTA for 1.16 hboot if you haven't already done so.
There is currently no unofficial unlock/S-OFF
There is no RUU to fix the phone if you screw up.
There is nothing in the OTA you can't get in other ways.
2. If you're on 1.16 and want custom ROMs and aren't worried about warranty, go ahead and do unlock from HTC, but bear in mind:
There is no RUU, so you can't go back to stock
You can't flash radios
You can't superCID or similar ( but not needed since there is no RUU )
2a. You don't need any existing root method to exist, there is no exploit involved in any of this, this will work irrespective of the current status of a root expoit existing or not.
2b. The phone does not have to be listed by HTC as being supproted. Any phone with a suitable hboot can be unlocked.
if this:
Code:
fastboot oem get_identifier_token
returns an identifier code then the phone can be ulocked.
globatron said:
ok, just to put some closure and sanity on this thread.
Firstly I'm probably bettery know as hyuh on #revolutionary, and it was me who was connected to his PC.
I use teamviewer to connect to people remotely, this allows anyone who doesn't like the look of *anything* I do to diconnect me...The user in front of the PC has full control of my session and I remind them to close teamviewer after we're done.
Secondly to those who think you need to be S-OFF to install a custom ROM or custom recovery, this is simply not true in the case of the 1.16 hboot. If you follow the HTC unlock procedure then you will have sufficient access to the phone to do this, it is not S-OFF just an unlock. Your phone will be in state "S-ON unlocked" This allows certain partitions on the emmc to be written to, and this sufficient for custom ROMs.
Really all that is requird is:
Code:
fastboot flash recovery <recovery.img>
then follow the normal flashing procedures.
In jakeyo's case CM7 would not boot, but MIUI would. When I say it would not boot I do not mean a boot loop here, I mean no boot period. At this point I had expected to need to rebuild a boot image for CM7 for him suspecting that HTC had done something different in the new hboot with paritions or the boot image offset.
The reason for flashing the MIUI boot image on top of CM7 was simple, to get to adb in the boot image. However seeing nothing particularly strange in the boot sequence ( other than the mismatch and resulting bootloop) I decided to reflash the CM7 boot image through fastboot.
The phone booted fully this time without issues.
It appears that the boot image simply did not flash properly from recovery the first time but I don't have a vivo to troubleshoot further.
A couple of things:
1. Don't take the OTA for 1.16 hboot if you haven't already done so.
There is currently no unofficial unlock/S-OFF
There is no RUU to fix the phone if you screw up.
There is nothing in the OTA you can't get in other ways.
2. If you're on 1.16 and want custom ROMs and aren't worried about warranty, go ahead and do unlock from HTC, but bear in mind:
There is no RUU, so you can't go back to stock
You can't flash radios
You can't superCID or similar ( but not needed since there is no RUU )
Click to expand...
Click to collapse
Get a mod to make a hboot sticky there will be floods of this crap further down the road.
Hello everyone,
This is my first post so I hope I don't end up being a "typical noob".
I'll try give the full info but keep it concise.
Background:
1) Carrier Unlocked HTC One M7 Originally on Rogers.
M7_UL PVT SHIP S-On RH
HBoot-1.44.000
Radio - 4A.14.3250.13
Open DSP 26.120.274.0202
emmc-boot
2) The phone was working perfectly after being hard reset, and configured without a sim.
3) After it was activated by the telco, the keyboard would would no longer work. Dialpad fine... menus fine... but no keyboard would pop up when selecting text fields. Did a full factory reset, and also tried clearing the Sense Touch data cache via Settings->App.
4) After trying various possible solutions I found online, I finally decided to try start from scratch by installing stock firmware.
WARNING: i'm the second owner of the phone. For warranty I would have had to send the phone to HTC. I suspect the HTC warranty won't apply to me anyhow. I suggest that in this situation, people just get the phone fixed on warranty if they have that option
First Steps:
A1) I unlocked the bootloader via HTCDev and used adb to flash CWM Touch Recovery.
A2) Restored the "M7 CWM Nandroid Backup / CID ROGER001 / 1.29.631.17 (Rogers - Thanks to Whampahoofus)"
A3) Phone now works correctly at this stage, but is still bootloader unlocked/tampered + CWM Touch Recovery
A4) While I may eventually flash the phone to an official Developer Edition
I would like to reinstall a factory recovery.img, then use revone to get rid of the bootloader "tampered" flag and relock it. (for OTA Updates, and the usual warranty concerns)
A5) I tried flashing both the boot.img and recovery.img from "OTA_M7_UL_JB_50_Rogers_WWE_1.29.631.17_R-1.29.631.4_release_318662" to get back to stock recovery, but I got a Red triangle.
Questions:
Q1): Does anyone know of a stock recovery.img I can use with Rogers firmware ? (SEE UPDATE BELOW)
Q2): Is there some trick to getting the OTA recovery/boot images I tried....working ? Is there some cache reset of somthing that needs to be done after flashing the stock recovery/boot imgs ? (SEE UPDATE BELOW)
Thanks in advance !
same issue
I too am looking for a rogers ruu or even the M7 CWM Nandroid Backup / CID ROGER001 / 1.29.631.17 (Rogers - Thanks to Whampahoofus) since bugsys page is down.
bump
LRail said:
Hello everyone,
This is my first post so I hope I don't end up being a "typical noob".
I'll try give the full info but keep it concise.
Background:
1) Carrier Unlocked HTC One M7 Originally on Rogers.
M7_UL PVT SHIP S-On RH
HBoot-1.44.000
Radio - 4A.14.3250.13
Open DSP 26.120.274.0202
emmc-boot
2) The phone was working perfectly after being hard reset, and configured without a sim.
3) After it was activated by the telco, the keyboard would would no longer work. Dialpad fine... menus fine... but no keyboard would pop up when selecting text fields. Did a full factory reset, and also tried clearing the Sense Touch data cache via Settings->App.
4) After trying various possible solutions I found online, I finally decided to try start from scratch by installing stock firmware.
So far:
A1) I unlocked the bootloader via HTCDev and used adb to flash CWM Touch Recovery.
A2) Restored the "M7 CWM Nandroid Backup / CID ROGER001 / 1.29.631.17 (Rogers - Thanks to Whampahoofus)"
A3) Phone now works correctly at this stage, but is still bootloader unlocked/tampered + CWM Touch Recovery
A4) While I may eventually flash the phone to an official Developer Edition
I would like to reinstall a factory recovery.img, then use revone to get rid of the bootloader "tampered" flag and relock it. (for OTA Updates, and the usual warranty concerns)
A5) I tried flashing both the boot.img and recovery.img from "OTA_M7_UL_JB_50_Rogers_WWE_1.29.631.17_R-1.29.631.4_release_318662" to get back to stock recovery, but I got a Red triangle.
Questions:
Q1): Does anyone know of a stock recovery.img I can use with Rogers firmware ?
Q2): Is there some trick to getting the OTA recovery/boot images I tried....working ? Is there some cache reset of somthing that needs to be done after flashing the stock recovery/boot imgs ?
Q3) If I eventually decide to install the Developer Edition firmware.. will the phone be effectively be a Dev phone ? (OTA updates... factory recovery/locked bootloader... no ID issues in the future..)
Thanks in advance !
P.S. For pure curiousity.... Am I correct in believing that revone can't clear the "tamper" flag and lock the bootloader with the custom recovery ?
Click to expand...
Click to collapse
double post
omgkush said:
I too am looking for a rogers ruu or even the M7 CWM Nandroid Backup / CID ROGER001 / 1.29.631.17 (Rogers - Thanks to Whampahoofus) since bugsys page is down.
bump
Click to expand...
Click to collapse
A lot of the RUUs and nandroid files were apparently "saved" to "Crushalot's" site: htc1guru.com
you can also get the file links in this thread: http://forum.xda-developers.com/showthread.php?t=2428276
I used that nandroid backup. I don't think a Rogers RUU exists (yet).
UPDATE ON MY PROGRESS:
1) I had success with using revone to get my M7 S-Off and removed the tampered flag in the bootloader.
I suspected that SuperSU wasn't working right becaue i hadn't been getting a root permission popup window on the phone.
On I reinstalled SuperSU, I got the root rights popup window when running revone, and it then worked.
2) I have realized that the firmware.zip, which is contained in the OTA update, contains the factory recovery and boot image I needed.
(I kept thinking that it was an incremental update and not a complete image or something, due to it's size.)
Therefore, instead of flashing the images individually, I used the firmware.zip from the OTA update to do a complete firmware update.
3) The Red triangle I was getting was, normal. I couldn't find clear info, so I assumed it was a bad sign because the only time i had seen the factory recovery was when it was upating with a red circle/arrow. So.. I thought the red circle/arrow was the icon you wanted to see.
Eventually I found a thread for a different HTC Phone, that also works for the M7
Result: You can use the volume up + power buttons to enter the recovery once the red triangle appears.
4) After installing the firmware (extracted from the OTA update), I used revone to set the phone back to S-ON, then locked it.
5) The OTA update then automatically installed, as a stock phone would.
6) After the OTA update, for some reason the tampered flag is back. I'll be using revone today to fix that.
UPDATE 2
:
6) After the OTA update, for some reason the tampered flag was back. I unlocked the phone, used revone to to get S-OFF, then used revone to reset the tamper flag and relock the bootloader, and then "fastboot oem writesecureflag 3" to set S-ON.
After 2 reboots the Tampered flag was back !
I'm suspecting that for the tampered flag to stay off I need to keep it S-OFF, which defeats the whole idea of trying to return it to stock.
Any ideas ?
Anyone working for Rogers want to leak an RUU ? hehe
Did you use CWM to flash the firmware.zip in step 2? I'm trying to follow your steps to get back to stock to obtain my stock rogers update but i'm getting lost as to what you're using to flash, recovery or fastboot.
LRail said:
A lot of the RUUs and nandroid files were apparently "saved" to "Crushalot's" site: htc1guru.com
you can also get the file links in this thread: http://forum.xda-developers.com/showthread.php?t=2428276
I used that nandroid backup. I don't think a Rogers RUU exists (yet).
UPDATE ON MY PROGRESS:
1) I had success with using revone to get my M7 S-Off and removed the tampered flag in the bootloader.
I suspected that SuperSU wasn't working right becaue i hadn't been getting a root permission popup window on the phone.
On I reinstalled SuperSU, I got the root rights popup window when running revone, and it then worked.
2) I have realized that the firmware.zip, which is contained in the OTA update, contains the factory recovery and boot image I needed.
(I kept thinking that it was an incremental update and not a complete image or something, due to it's size.)
Therefore, instead of flashing the images individually, I used the firmware.zip from the OTA update to do a complete firmware update.
3) The Red triangle I was getting was, normal. I couldn't find clear info, so I assumed it was a bad sign because the only time i had seen the factory recovery was when it was upating with a red circle/arrow. So.. I thought the red circle/arrow was the icon you wanted to see.
Eventually I found a thread for a different HTC Phone, that also works for the M7
Result: You can use the volume up + power buttons to enter the recovery once the red triangle appears.
4) After installing the firmware (extracted from the OTA update), I used revone to set the phone back to S-ON, then locked it.
5) The OTA update then automatically installed, as a stock phone would.
6) After the OTA update, for some reason the tampered flag is back. I'll be using revone today to fix that.
UPDATE 2
:
6) After the OTA update, for some reason the tampered flag was back. I unlocked the phone, used revone to to get S-OFF, then used revone to reset the tamper flag and relock the bootloader, and then "fastboot oem writesecureflag 3" to set S-ON.
After 2 reboots the Tampered flag was back !
I'm suspecting that for the tampered flag to stay off I need to keep it S-OFF, which defeats the whole idea of trying to return it to stock.
Any ideas ?
Anyone working for Rogers want to leak an RUU ? hehe
Click to expand...
Click to collapse
Tampered will come back the second you flash a recovery. Best to stay S-OFF
I've been in a similar situation where I had to send my phone in for repair and couldn't get the tamper flag to stay off.
I found out it was because I was trying to remove the flag and lock the bootloader and S-On on 1.29.631.17
What I had to do was restore using CWM back to 631.4 then flash stock recovery then remove flag, lock bootloader, then S-On.
The tamper flag should stay off you can try rebooting a couple of times then boot into bootloader to check.
Then I ran the OTA updates and i'm on 631.17 at the moment and my tamper flag is still off.
Hope this helps.
PS. I believe the latest JB4.3 OTA update upgrades the hboot to 1.55 so revone would not work on it. Not planning to try it myself but if anyone can verify this would be great
ysl00 said:
I've been in a similar situation where I had to send my phone in for repair and couldn't get the tamper flag to stay off.
I found out it was because I was trying to remove the flag and lock the bootloader and S-On on 1.29.631.17
What I had to do was restore using CWM back to 631.4 then flash stock recovery then remove flag, lock bootloader, then S-On.
The tamper flag should stay off you can try rebooting a couple of times then boot into bootloader to check.
Then I ran the OTA updates and i'm on 631.17 at the moment and my tamper flag is still off.
Hope this helps.
PS. I believe the latest JB4.3 OTA update upgrades the hboot to 1.55 so revone would not work on it. Not planning to try it myself but if anyone can verify this would be great
Click to expand...
Click to collapse
Thanks for the heads up. If I get a bunch of free time I may just test that after doing a new full backup.
Not sure about the Rogers 4.3 OTA.
I'm running currently the phone with Developer Edition ROM+CID and can confirm that it's 4.3 OTA updates hboot to 1.55.
After the update my phone is still s-off.
I have previously rolled back to an older hboot via a firmware flash.
Since the phone is still S-OFF, I assume I can do that again if needed.
EddyOS said:
Tampered will come back the second you flash a recovery. Best to stay S-OFF
Click to expand...
Click to collapse
Thanks For the reply Eddy.
Recovery flashing sets the tampered flag even if it's a factory recovery from an OTA being flashed ?
I agree on the S-OFF normally.
This was a test to see if I could get it back to full stock for warranty if needed, and S-OFF would not be acceptable in that case.
please help!
PLEASE! I have been trying to get Rogers stock Canada back on my HTC since the day after release lol..
I have this nandroid backup but can't figure out how to flash it... I also can't relock to try and flash a legit version
So pleaseeee how do I install this!!! I am using cwm I tried making a folder called backups in clockworkmod dir but it doesn't pickup the nandroid backup... Help plz!!!!
So what do I do with the M7 CWM Nandroid Backup CID ROGER001 1.29.631.17 2013-06-03.zip
I can't flash it and it won't recognise it as a backup, how do I even install it?
Nobody has mentioned how to use this zip, it isn't a tar file or flashable so what do I do with it?
millarrjm said:
PLEASE! I have been trying to get Rogers stock Canada back on my HTC since the day after release lol..
I have this nandroid backup but can't figure out how to flash it... I also can't relock to try and flash a legit version
So pleaseeee how do I install this!!! I am using cwm I tried making a folder called backups in clockworkmod dir but it doesn't pickup the nandroid backup... Help plz!!!!
Click to expand...
Click to collapse
Esposition said:
So what do I do with the M7 CWM Nandroid Backup CID ROGER001 1.29.631.17 2013-06-03.zip
I can't flash it and it won't recognise it as a backup, how do I even install it?
Nobody has mentioned how to use this zip, it isn't a tar file or flashable so what do I do with it?
Click to expand...
Click to collapse
Simply doing a web search for info would have given you the answers on many many webpages and some youtube videos.
http://bit.ly/1a6d88A
http://bit.ly/1a6ewZ5
Quick answer:
1) Nandroid backups are created and used by the custom recovery "clockworkmod"
2)You need to install a CWM custom recovery (i like the touch version), then unzip the nandroid backup file to the /clockworkmod/backup/ folder. It will create a new folder there. I used the program "Android File Transfer" to copy the files from my laptop to the phone.
3) Once the backup file is on your phone, to restore the backup, you simply boot into recovery and restore the backup as explained in those web pages or youtube videos.
If you have specific things you have tried.... folder names... etc. then ask a question in detail.
You will then have a much higher chance of getting a correct answer (or even an answer at all)
Hope that helps a bit...
Cheers
PS:
millarrjm
FWIW: Simply asking general questions with "pleaseee" and a bunch of exclamation points is a quick way to be ignored (especially in this forum meant for people with some technical skill) See this video (which you should have seen on signup to the forum) for info: http://www.youtube.com/watch?v=JmvCpR45LKA
re.
LRail said:
Simply doing a web search for info would have given you the answers on many many webpages and some youtube videos.
http://bit.ly/1a6d88A
http://bit.ly/1a6ewZ5
Quick answer:
1) Nandroid backups are created and used by the custom recovery "clockworkmod"
2)You need to install a CWM custom recovery (i like the touch version), then unzip the nandroid backup file to the /clockworkmod/backup/ folder. It will create a new folder there. I used the program "Android File Transfer" to copy the files from my laptop to the phone.
3) Once the backup file is on your phone, to restore the backup, you simply boot into recovery and restore the backup as explained in those web pages or youtube videos.
If you have specific things you have tried.... folder names... etc. then ask a question in detail.
You will then have a much higher chance of getting a correct answer (or even an answer at all)
Hope that helps a bit...
Cheers
PS:
millarrjm
FWIW: Simply asking general questions with "pleaseee" and a bunch of exclamation points is a quick way to be ignored (especially in this forum meant for people with some technical skill) See this video (which you should have seen on signup to the forum) for info: http://www.youtube.com/watch?v=JmvCpR45LKA
Click to expand...
Click to collapse
I tried that. CWM version 6.+ doesn't save to the backup folder anymore. And won't read a restore I put in it either... Ie. The rogers off the bugzylawson site.
bklam said:
Did you use CWM to flash the firmware.zip in step 2? I'm trying to follow your steps to get back to stock to obtain my stock rogers update but i'm getting lost as to what you're using to flash, recovery or fastboot.
Click to expand...
Click to collapse
Hello bklam,
Sorry, I missed your question.
No. I used CWM only to restore the "Whampahoofus"' nandroid backup.
That backup is "almost" 100% stock. Unfortunately it contains a custom recovery and won't (in my experience) work for normal OTA updates.
To solve this I decided to extract the factory firmware from one of the old Rogers OTA ("unrar" will extact the files from the OTA), and flash that.
To flash it I used the quick instructions in the 1st post of this thread-->http://forum.xda-developers.com/showthread.php?t=2182823
(I believe there were more details instructions on firmware.zip flashing in another thread but I can't find it at the moment)
Note to other readers: There can be confusion about the word "firmware". Some people use it describe the Rom.
In this case, I'm referring to the hboot, boot and recovery images in a single special file called firmware.zip. I believe in some cases it can also include the radio software too.
If I ever get a chance to get this 100% tested and figured out, I'll post a step by step method.
At this point it's just a overview of what I tried, and looking for other members advice.
Unfortunately, as you can see from my posts, it didn't work 100% for me. It gave me the stock Rogers HTC One Rom/software with OTA updates, but the bootloader still had the tampered flag.
Check out ysl00's post above. He/She evidently had it working 100% without the tamper flag.
Not sure if Rogers has a 4.3 OTA yet, but that might fix the flag since it includes a firmware update along with the OS update.
Post back with your results !
Did you see my above reply lrail? .. just saw u post after thought you might have missed ot!! Thanks so much fpr the help and replies. You are the man!
figured it out.
I thoight the explorer I was using showed all files on phone. TO FIX this issue download root explorer and you can see the other directories... Goto data>media>clockworkmod>backups .. it isnt in the sd dir on your phone.
millarrjm said:
Did you see my above reply lrail? .. just saw u post after thought you might have missed ot!! Thanks so much fpr the help and replies. You are the man!
Click to expand...
Click to collapse
Sorry about that. No I didn't see it until just now. I guess thats the problem with having 20 browser tabs open at once. hehe
millarrjm said:
I thoight the explorer I was using showed all files on phone. TO FIX this issue download root explorer and you can see the other directories... Goto data>media>clockworkmod>backups .. it isnt in the sd dir on your phone.
Click to expand...
Click to collapse
Good to hear. I read your post. I thought..."Is he using a root file manager ?" then read your next post….
I was also going to suggest a guaranteed way to determine where the CWM backups are being stored on a phone.
This way it doesn't matter which version of CWM, which phone or if the back directory exists yet.
Simply create a test backup and see where it goes. Then copy the Nandroid backup that you want to restore, there.
I should mention that I'm currently running my phone as a Developer Edition (Brightstar) 4.3 with OTAs, S-OFF, and unlocked.
It's works perfectly. Only the Carrier ID (CID) needed to be changed. The MID is the same.
I assume that a brightstar RUU will work on it now, even if the phone was locked and S-ON.
I have a few more things I want to tweak on it, then I'll likely make a backup and try restore it to stock rogers again so that I can create a clear how-to.
What's interesting, is that the Developer Edition OS seems to be the same as the Rogers Edition OS (without the rogers apps which can be uninstalled).
The only reason I think it might be a better choice is that the Dev Edition should get OTA updates earlier than the Rogers Edition.
I tried the custom Viper Rom 2.6.x but couldn't get an LTE connection. I suspect that was due to APN settings, but I didn't confirm that.
Anyone got the Viper Rom fully working on a Roger HTC M7 ?
Alright so I've successfully re-installed that nandroid backup and enabled s-off, re-locked, and removed the tampered notification.
When I try to do the OTA update it just hangs at the bug fix1. It default opens and tries to install it through cwm recovery, I've never done any OTA updates before so I assume this is normal?
How can I fix it hanging at bug fix1?
Esposition said:
Alright so I've successfully re-installed that nandroid backup and enabled s-off, re-locked, and removed the tampered notification.
When I try to do the OTA update it just hangs at the bug fix1. It default opens and tries to install it through cwm recovery, I've never done any OTA updates before so I assume this is normal?
How can I fix it hanging at bug fix1?
Click to expand...
Click to collapse
The OTAs don't work with custom recovery. You need the factory recovery
Hi, I have an Unlocked 32GB HTC One (BS_US001) and I'm having a hard time trying to find info about stock recoveries.
My phone currently is on stock 4.1.2, bootloader unlocked, S-Off and rooted. I was using the TWRP recovery, used to root my phone. Since the 4.3 update came out, I was searching for the stock recovery to proceed with the update, but too many different files seems to exist. I just want to install the right recovery and apply the 4.3 update, no full ROM flash.
Yesterday I flashed this recovery file (9MB) and got icons similar of those on the right of this image.
Today, I flashed this one (7.9MB) and got something like this, the little android icon.
Later, I've found another one (9.8MB).
Edit: and another one, a few bytes shorter than the third.
But now I'm little afraid of flashing again, just for the sake of it.
So, first of all, which one is the right file for my phone (yet another one)?
Second, I flash recoveries through fastboot command line (fastboot flash recovery recovery.img). Can this method and command brick my phone?
Third, how the stock recovery behaves on your phone? Both times, when I flashed the files and entered in recovery mode, my phone would boot 2 or 3 times straight into recovery mode again, until it boot itself properly, into the system. Also, recovery mode goes from the green to the red icon and awaits until I reboot the phone again.
Thanks in advance.
Final edit: For the sake of others lost in the lack of good info, I'm editing this old post.
I found some crap advices here and there. One of them was the need to relock the bootloader to accept OTAs. It doesn't make any sense, but if you are seeking help, you will take **** as good advice. Don't do it.
Another bad advice was about the stock recovery. Just open the last update you got (Downloads folder on your phone or get the OTA from HTC website) and extract the recovery.img file. Flash it and you have the proper stock recovery for your phone.
All of this is about the stock HTC One - no custom roms, no xposed changes, nothing. The only thing I did prior to this was to flash TWRP and root. That's how I want my phone for now - stock with root.
I kind of went through this today. Ended up just wiping it, running a RUU and reapplying OTAs.
I'll tell you this… after I went through this I attempted to salvage the stock recovery before rerooting etc. I was stuck trying to get fastboot to boot a recovery instead of flash one. I did find an alternate way to harvest the recovery. I got it out of the ota. I'm not done testing it yet, but my phone was still showing tampered. Flashed cwr and called it a day at that point
Sent from my HTC One
Thank you for your answer. I'm trying to avoid the whole RUU thing, but I'll keep it as a last resource, for sure. Also, I'm trying to understand more about this piece of software called recovery.
The one I sent you is pulled directly from stock 1.29.1540.16 for Dev. edition, which comes with an unlocked bootloader as well. Also, it's signed, which will allow it to be flashed whether you're s-on or off. Assuming your MID is PN0712000, with CID BS_US001, this recovery is your stock and will work. Hope it helps.
kibmikey1 said:
The one I sent you is pulled directly from stock 1.29.1540.16 for Dev. edition, which comes with an unlocked bootloader as well. Also, it's signed, which will allow it to be flashed whether you're s-on or off. Assuming your MID is PN0712000, with CID BS_US001, this recovery is your stock and will work. Hope it helps.
Click to expand...
Click to collapse
I've been running into similar issues. For the previous 2 OTA's (1540.3 --> 1540.16 & 1540.16 --> 1540.17), simply reflashed stock recovery, ran the OTA, it updated, then I flashed TWRP again. For the most recent OTA (3.22.1540.1, I think), that seems to not be working, but I can't seem to find the right recovery. I've found 1540.3's recovery, but not 1540.16 (or .17 if there was a new recovery in that OTA). Where did you end up finding it?
Thanks!
bjg222 said:
I've been running into similar issues. For the previous 2 OTA's (1540.3 --> 1540.16 & 1540.16 --> 1540.17), simply reflashed stock recovery, ran the OTA, it updated, then I flashed TWRP again. For the most recent OTA (3.22.1540.1, I think), that seems to not be working, but I can't seem to find the right recovery. I've found 1540.3's recovery, but not 1540.16 (or .17 if there was a new recovery in that OTA). Where did you end up finding it?
Thanks!
Click to expand...
Click to collapse
I pulled it directly from my decrypted RUU zip of 1540.16.
Here, there are some of stock recovery.
Check if there is the right version for you.
You have to check the versionmain on your phone
kibmikey1 said:
I pulled it directly from my decrypted RUU zip of 1540.16.
Click to expand...
Click to collapse
Would you be willing to share it? I haven't found a decrypted version of the 1540.16 RUU since Bugsy's hosting server stopped hosting downloads (The new thread only has 1540.3 last I checked).
Guich said:
Here, there are some of stock recovery.
Check if there is the right version for you.
You have to check the versionmain on your phone
Click to expand...
Click to collapse
Thanks, looks like for the dev edition, those sites only have the new recovery from the Android 4.3 updated (3.22.1540.1), though
bjg222 said:
Thanks, looks like for the dev edition, those sites only have the new recovery from the Android 4.3 updated (3.22.1540.1), though
Click to expand...
Click to collapse
Is the 3.22 in the folder
Guich said:
Is the 3.22 in the folder
Click to expand...
Click to collapse
In the Dev Edition folder, 3.22 is all that's there. Have you had any luck finding the 1.29.1540.16 recovery? That's the one I need.
bjg222 said:
In the Dev Edition folder, 3.22 is all that's there. Have you had any luck finding the 1.29.1540.16 recovery? That's the one I need.
Click to expand...
Click to collapse
1.29.1540.16 Developer Edition signed stock recovery.
Has anyone else flashed stock recovery while on custom ROM? I was pleasantly surprised to discover my SD card was wiped Is this normal, and was there some way I could have figured out this was what was going to happen? I don't really understand what stock recovery does/is for. The only other time I'd flashed stock recovery was after restoring to stock ROM from nandroid.
kibmikey1 said:
1.29.1540.16 Developer Edition signed stock recovery.
Click to expand...
Click to collapse
Awesome, thanks!
bjg222 said:
Awesome, thanks!
Click to expand...
Click to collapse
Have you had any luck with this? I have a DE 64gb and I'm in the same situation you were/are, I'm on stock recovery but I can't accept the OTA unlike the other 4.1.2 ones. Always gets stuck on the red triangle !.
arikah said:
Have you had any luck with this? I have a DE 64gb and I'm in the same situation you were/are, I'm on stock recovery but I can't accept the OTA unlike the other 4.1.2 ones. Always gets stuck on the red triangle !.
Click to expand...
Click to collapse
If you're rooted, unroot through SU, then do a factory reset and try it again.
kibmikey1 said:
If you're rooted, unroot through SU, then do a factory reset and try it again.
Click to expand...
Click to collapse
I haven't been rooted since one of the last 4.1.2 updates, because that's when I went back to stock recovery. I was able to accept those OTA packs, why is this one different? I'm really trying to save factory resets or RUU's for the absolute last ditch effort, in fact I'm more likely to stick with 4.1.2 until I can find a way to do this.
help
I have att htc one dev edition, its in soft brick state and i cny get it to do anything, i have tried running the recovery kit, and that get to the end then error 131...
could somebody please suggest some help for me please, thanks in advance