How do i flash JPA or JPO firmware - Galaxy S I9000 Q&A, Help & Troubleshooting

Hi i currently have JM1 on my SGS but want to try the latest 2.2 firmwares, when i've downloaded them they arn't in the usual CSC PDA & Modem files that are used with odin, so how do i go about flashing one of these new firmwares.

ixon2001 said:
Hi i currently have JM1 on my SGS but want to try the latest 2.2 firmwares, when i've downloaded them they aren't in the usual CSC PDA & Modem files that are used with odin, so how do i go about flashing one of these new firmwares.
Click to expand...
Click to collapse
Please check the first few posts of the threads from where you downloaded the ROM's, they usually give a very detailed instructions. On a thread like THIS, there are a lot of chances that people will only give THAT part THAT they think is important.

yo
there is only 1 file you set in odin as "PDA" file, use the "803 pit" file and flash as normal..
good luck
cyff

Thread reported.
This is a DEVELOPER FORUM.
Please read stickies and instructions for the specific ROM you are flashing. The info is everywhere, it won't be spoon-fed to you.

Related

[Q] Where can I find PDA/Modem/CSC files?

I'm trying to install the DocRambone series on my Samsung Galaxy S, but when I get to HOWTO#1 it says:
"2.Select the PDA/Modem/CSC/.PIT files in Odin. (.PIT and PDA are required. CSC and Modem are HIGHLY recommended. They may be necessary depending on the PDA! Try flashing all three BEFORE reporting bugs, if you only used one initially!)"
Now, the .PIT file I've already found(I chose the 512 since I understand that the 513 is for older versions and 803 is for Froyo). But I don't know where to find the other things, meaning PDA, CSC and Modem? Which ones should if pick(if there is more than one) and why?
If they are on my phone already, how do I mount them in Odin?
My firmware version is
PDA: I9000XWJM2
Phone: I9000XXJM1
CSC: I9000NEEJM1
Thanks alot
/JohnTheOne
Anyone who can help me?
Which Version Froyo? It sounds like you like to flash Froyo..
ok
You must make a Clean Stock Froyo Install.. I think u choose XXJPK take the files at the Tut..! ;D And then you can flash the "Custom Rom" via update.zip
Think thats it is what u mean..
I'm not flashing Froyo, I'm flashing for DocRomboe which is 2.1 (I think?) .. but like I said, the guide sais what I said above.. I need to find PDA, CSC and modem files, because (accordimg to the guide) Odin needs those files.. I'm following the big faq guide, so if anyone could tell me what to do, I'd appreciate it
Sent from my GT-I9000 using XDA App
So.. Who can help?
Sent from my GT-I9000 using XDA App
Oh come on, I really wanna do this soon !!
Read the Docrombone thread again and see what rom it is for. Its a mod. Now go find the rom it wants, something like say JM5 or JM8? do a search and you'll see people link it. Or goto http://www.samfirmware.com/ and make a account to view the firmwares there. I have no idea what rom that mod wants since you are the one wanting to install it
If you are looking for MODEM and CSC files specifically for 2.1, you can pull the ones from Richthofen's post here
-OR-
If you want to maintain your JM1 MODEM/CSC files, like the above poster suggested, visit Samfirmware

[Q] How to downgrade I9000 from 2.3.3 to 2.2 stock

Firstly, apologies if this is already posts elsewhere, but I have tried looking for this with no joy (there's aloooot of threads n here lol)
I recently upgraded to the leaked official 2.3.3 using odin (sbl version).
However, I would like to flash with stock software now to get the official upgrade on my Galaxy S via Kies.
Can someone please help or point me to a guide on doing this and where i can download the correct version. I assume its not as straightforward as simply downloading a stock version of Froyo and flashing as I did to upgrade.
My Current phone version is showing as PDA:JVK / PHONE: JVK / CSC:JVK (CPW)
I should point out that this is the first time ive flashed software on my phone, so ideally a step by step guide, if there is one out there
Thanks for any advice you can give
Ok first of all what you need to do is download an older firmware, preferably in 3 files.
Look here: www.samfirmware.com (you need to register, free)
or look here: http://forum.xda-developers.com/showthread.php?t=846913
when you have your selected firmware, you need to download a software called 'Odin', this is what we use to flash firmwares to our devices. Look here for a tutorial http://forum.xda-developers.com/showthread.php?t=723596
when you have 'Odin' and your 'Firmware' you may also need a 'PIT' file, this is explained in the above link. This will re-partition the device and restore the 'bad blocks' and remove any lagfix / altered file-systems ect ect.....
Because you are on Gingerbread at the moment, its possible that you have changed your boot loader, in order to restore this back to Froyo bootloader, i think the firmware you will need is JM1 ( you may need to search here / google for the correct answer)
anyway when the whole process is completed, you should be able to connect to KIES and flash the latest release.
Any problems just write back. im sure we can help get you going !!
azzledazzle said:
Ok first of all what you need to do is download an older firmware, preferably in 3 files.
Look here: www.samfirmware.com (you need to register, free)
or look here: http://forum.xda-developers.com/showthread.php?t=846913
when you have your selected firmware, you need to download a software called 'Odin', this is what we use to flash firmwares to our devices. Look here for a tutorial http://forum.xda-developers.com/showthread.php?t=723596
when you have 'Odin' and your 'Firmware' you may also need a 'PIT' file, this is explained in the above link. This will re-partition the device and restore the 'bad blocks' and remove any lagfix / altered file-systems ect ect.....
Because you are on Gingerbread at the moment, its possible that you have changed your boot loader, in order to restore this back to Froyo bootloader, i think the firmware you will need is JM1 ( you may need to search here / google for the correct answer)
anyway when the whole process is completed, you should be able to connect to KIES and flash the latest release.
Any problems just write back. im sure we can help get you going !!
Click to expand...
Click to collapse
I think that JM1 is eclair...
froyo works with the gingerbread bootloaders so you should just be able to flash a froyo rom i THINK.
Hi im also wanting to do the same looking at the samfirmware files would JS8 be ok to flash?
neoian1277 said:
Hi im also wanting to do the same looking at the samfirmware files would JS8 be ok to flash?
Click to expand...
Click to collapse
Any froyo ROM is fine as long as it contains the bootloaders as gingerbread ROMs have different ones.
Download your ROM. Check inside the PDA (sometimes code) tar. If you can't see by clicking on it find instructions how to untar it.
There should be a boot.bin and an sbl.bin if there is you're good to go. If not flash another one that has.
You can always reflash with your preferred froyo ROM after the initial flash has downgraded the bootloaders
This link tells you all you need to know about flashing with Odin.
http://samsunggalaxysforums.com/showthread.php/2921-How-to-use-Odin-to-upgrade-to-Froyo-from-Eclair
Sent from my GT-I9000 using XDA App
Ok, I tried flashing using the JPY firmware. The process seemed to go okay.
But only getting the 'S' logo for ages then the phone starts ocaasional quick vibrations and screen eventually goes black.
Have tried rebooting ans reseting.
Please help
First boot after a flash does take a long time and you may get the odd little vibration. The screen may go black for a little while. Be patient. If nothing happens after six or seven minutes pull battery try again. If still no good reflash.
You did check repartition in Odin? And use. 512 pit? You need the pit file for a reflash.
Maybe md5 your firmware to check you didn't get a corrupted download.
If you can still get download mode don't worry you will be able to sort it. Most people on xda brick their phones most weeks!
Sent from my GT-I9000 using XDA App
well i reflashed the 2.3.3 leaked and its working for now, will try again tomorrow, getting a bit late.
Was wondering about whether I should try the JM1 instead of JPY. But, on the Sammyfirmware website they only had XW***JP1 which I understand is not for UK/Europe (mine is XX)?
But thanks everyone for your help so far, i may be back on in tears tomorrow
You can use any firmware - they were released with different codes in different regions but if you use a multi CsC like the one in the jpy ROM it doesn't matter because its the csc file that does the regional settings not the PDA file
Sent from my GT-I9000 using XDA App
Hmmm well showing on Samsungs FB page that the ginerbread update has been pulled (by Google)
Guess i'm sticking with the leaked version for now
Sorry to muscle in on this thread but I'm trying to go back from GB 2.3.3 to Froyo 2.2.1. I've flashed JPY with Odin, used repartition, 512 pit and registry patch 1.82 to XEU, phone works fine. Well, Kies then recognises that there is a new firmware (JPY as it happens) and starts the upgrade process, I then get an error message saying that this version can't be updated
Any ideas??
MTIA
maybe you will find some info in this post.....
http://forum.xda-developers.com/showthread.php?t=1044534
Anybody tell me what is lagfix and why it is used for?
and why different kernels are used
Galaxy S XWJVB
richard2311 said:
maybe you will find some info in this post.....
http://forum.xda-developers.com/showthread.php?t=1044534
Click to expand...
Click to collapse
We now have two threads on the same subject but as this was started first I'll continue with this one.
Thanks for the suggestion, I flashed JPU but unable to connect to Kies so flashed the 1 file JPY but still got the same error message with Kies. Maybe I'll try reinstalling Kies and see what happens.
OK, I've reinstalled Kies, changed the product code in the phone with *#272*IMEI# to XEU and now Kies tells me that I have the latest firmware - great bring on the official version of GB.
can anyone give me a link of jpy firmware with bootloader?
the ones from samfirmare.com are WITHOUT bootloader...
Okay, seems that Samsung have finally released Gingerbread.....again. So am gonna make another attempt at downgrading to Froyo so I can get the official Gingerbread update.
However, because of the issues I had with my last attempt, I would like to make sure I am doing it correct.
Current Phone Software
Model: GT-I9000
Firmware Ver: 2.3.3
Baseband Ver: I9000XXJVK
Kernal Ver: 2.3.35.7-I9000XXJVK-CL75655 [email protected] #2
Build Number: GINGERBREAD.XXJVK
I believe the version I installed included the bootloader
The phone was purchased in the UK on T-Mobile but supplied through Carphone Warehouse
Steps:
Downloaded: I9000XXJPY (single file) & 512.pit from Samfirmware (does this contain bootloader? If not, will it cause an issue in updating on Kies?)
Remove sim & memory card
Start phone in Download mode
Plug in USB
Open Odin v1.3
Select .tar file as PDA
Select 512.pit file
Re-Partition - Not Ticked
Auto Reboot & F.Reset Time - Ticked
Click Start
Wait for installation to complete and phone to restart
Hopefully i've provided all the info required, but if not, please post or PM me. If anyone could please check my steps above and let me know if i'm doing this correct or not before I go ahead.
Much appreciated
hi there,
as i know, to run a 2.3.3 rom on SGS , we need to flash a new bootloader right?
but what if i wanna roll back to 2.2.1? do i need to do somthing to re-install a bootloader for 2.2.1?
cuz in most tutor of installing a 2.2.1 rom did mention DO NOT touch the "Phone Bootloader Update" option of odin3
thanks.
I have found a method to downgrade successfully and created a new post with the step by step guide
http://forum.xda-developers.com/showthread.php?t=1100906
Sent from my GT-I9000 using Tapatalk

[solved] Is this Odin setup correct to flash JVO?

Hello,
1) if I wanted to flash to JVO with Odin, is the setup in the attached pic correct (especially the files on PDA, PHONE, CSC and repartition ticked)?
2) Wasn't there a bootloader I needed to flash? I think I read somewhere the bootloader changed with GB.
Landorin said:
Hello,
1) if I wanted to flash to JVO with Odin, is the setup in the attached pic correct (especially the files on PDA, PHONE, CSC and repartition ticked)?
2) Wasn't there a bootloader I needed to flash? I think I read somewhere the bootloader changed with GB.
Click to expand...
Click to collapse
1)Yup
2)The bootloaders are included in the file you have ( See where it says sbl in the file name of the PDA )
Yeah saw that SBL and that made me suspicious whether that file really should go into the PDA slot and leave the bootloader slot blank.
Landorin said:
Yeah saw that SBL and that made me suspicious whether that file really should go into the PDA slot and leave the bootloader slot blank.
Click to expand...
Click to collapse
Nope leave it EXACTLY as you have it there mate and you are good to go.
and repartition has to be ticked as well, right?
Landorin said:
and repartition has to be ticked as well, right?
Click to expand...
Click to collapse
Yes.
You are using a pit file so you need repartition ticked.
Thanks a lot for the quick help!
Landorin said:
and repartition has to be ticked as well, right?
Click to expand...
Click to collapse
no don't repartition unless you want to in which case you need ONE EXTRA FILE: 512.pit!! You sound like a newbie so depending where you are coming from -stock firmware-wise, by all means repartition but you must obtain the 512.pit that you add to odin and flash with the rest of the rom. WARNING: this will wipe all your data and apps and repartition your phone including the sd card. make sure that you remove any external SD cards if you have one and the SIM card too...for peace of mind
UPDATE: oops! England has beaten Algeria...in cyberworldcup
I'd consider myself as noob, yep.
I thought I have to repartition when upgrading from JPY (2.2.1) to JVO? I don't know when this has to be done. Just saw the PIT file recommended for JVO on samfirmware and somehow assumed I have to repartition.
So what should I do, what's the difference if I do or not do it?
I backed up all data and wiped the phone before so there's not much on it right now (and no lagfix or so used, just stock rom with CF kernel).
Landorin said:
I'd consider myself as noob, yep.
I thought I have to repartition when upgrading from JPY (2.2.1) to JVO? I don't know when this has to be done. Just saw the PIT file recommended for JVO on samfirmware and somehow assumed I have to repartition.
So what should I do, what's the difference if I do or not do it?
I backed up all data and wiped the phone before so there's not much on it right now.
Click to expand...
Click to collapse
if you're sure that you used the same pit file as before i.e; 512.pit then you don't have to repartition at all.....if in doubt then repartition. BTW which pit file did you see on samfirmware.com? Should I assume that this is your first rom flashing from stock JPY? Also, make sure that you use the JVO rom that includes GB bootloaders.
Before? I never flashed a full ROM via Odin, only kernel (CF), thus I never re-partitioned myself.
Until now I used KIES always to flash ROMs.
If re-partitioning works like on a HDD I guess then this can be skipped unless something changed partition wise from Froyo to GB?
So do I need to re-partition at all?
Hey guys, gonna steal the end of this thread.
Currently I am on 2.2:
PDA: JPA / PHONE: JPP / CSC:JP7 (MET)
I want to use ODIN to upgrade to STOCK 2.2.1 and for it to change the CSC to XEU so that 2.3.3 (and future updates) will be done through kies automatically.
Can somebody confirm how I do this? Which file do i need to d/l - all three? And do I (and why) need to repartition?
Thanks in advance
Unregistered. said:
Hey guys, gonna steal the end of this thread.
Currently I am on 2.2:
PDA: JPA / PHONE: JPP / CSC:JP7 (MET)
I want to use ODIN to upgrade to STOCK 2.2.1 and for it to change the CSC to XEU so that 2.3.3 (and future updates) will be done through kies automatically.
Can somebody confirm how I do this? Which file do i need to d/l - all three? And do I (and why) need to repartition?
Thanks in advance
Click to expand...
Click to collapse
If you used Kies anyway, why not use it now to update to 2.2.1? Afaik you can change the CSC with market apps (think I read that somewhere but someone may want to confirm this). Anyways, you could just stick with your normal CSC as GB will be released to the rest of Europe anyway.
Currently, it's uncertain whether there will be more updates after GB afaik.
But yes, our question remains: do we have to re-partition at all if we only used Kies so far to update ROMs?
Landorin said:
If you used Kies anyway, why not use it now to update to 2.2.1? Afaik you can change the CSC with market apps (think I read that somewhere but someone may want to confirm this). Anyways, you could just stick with your normal CSC as GB will be released to the rest of Europe anyway.
Click to expand...
Click to collapse
Tried changing the CSC but it's didn't work. I'm with meteor and they are useless. So what i want is the stock 2.2.1 for UK and ireland as if it was d/l form kies and be on my way
Unregistered. said:
Hey guys, gonna steal the end of this thread.
Currently I am on 2.2:
PDA: JPA / PHONE: JPP / CSC:JP7 (MET)
I want to use ODIN to upgrade to STOCK 2.2.1 and for it to change the CSC to XEU so that 2.3.3 (and future updates) will be done through kies automatically.
Can somebody confirm how I do this? Which file do i need to d/l - all three? And do I (and why) need to repartition?
Thanks in advance
Click to expand...
Click to collapse
Official Samsung GB for UK has already rolled out, it's called XXJVO and believe me once you've done your first ODIN rom flashing you will never stop flashing other..(custom roms and kernels) if there're any geeky tendencies inside you and just waiting to be released... see this thread and all your fears will be assuaged!
http://forum.xda-developers.com/showthread.php?t=1011901
Widget21 said:
see this thread and all your fears will be assuaged!
http://forum.xda-developers.com/showthread.php?t=1011901
Click to expand...
Click to collapse
Thanks! There it says:
"Note: Re-partition is not a must, use it only if you need to change partition sizes on the device, but in most cases you will not need to repartition at all." question answered.
@Unregistered: you could use I9000XXJPY from samfirmware, JPY was the one that was offered to me by Kies back then (German unbranded SGS). But someone may want to confirm this to you first, as I see lots of others 2.2.1 ROMs there and not sure what the difference is. Samfirmware offers a single file and once extracted you should have 3 files.
I just wonder why the 2.2.1 ROM files do not show on that website which CSC is used, maybe it's universal or something?
Well, I guess Widget21 has a point here. If you are willing to flash now with Odin, you might be willing to do it with GB too, then the CSC won't matter (it doesn't matter much anyway as I learned).
Just be sure your 3 button combo is working and that you connect with direct USB.
Landorin said:
Thanks! There it says:
"Note: Re-partition is not a must, use it only if you need to change partition sizes on the device, but in most cases you will not need to repartition at all." question answered.
@Unregistered: you could use I9000XXJPY from samfirmware, JPY was the one that was offered to me by Kies back then (German unbranded SGS). But someone may want to confirm this to you first, as I see lots of others 2.2.1 ROMs there and not sure what the difference is. Samfirmware offers a single file and once extracted you should have 3 files.
I just wonder why the 2.2.1 ROM files do not show on that website which CSC is used, maybe it's universal or something?
Well, I guess Widget21 has a point here. If you are willing to flash now with Odin, you might be willing to do it with GB too, then the CSC won't matter (it doesn't matter much anyway as I learned).
Just be sure your 3 button combo is working and that you connect with direct USB.
Click to expand...
Click to collapse
Is it JPY or JPX for UK (XEU)?
I dont want to flash gingerbread. Not yet anyway.
Landorin said:
Thanks! There it says:
"Note: Re-partition is not a must, use it only if you need to change partition sizes on the device, but in most cases you will not need to repartition at all." question answered.
@Unregistered: you could use I9000XXJPY from samfirmware, JPY was the one that was offered to me by Kies back then (German unbranded SGS). But someone may want to confirm this to you first, as I see lots of others 2.2.1 ROMs there and not sure what the difference is. Samfirmware offers a single file and once extracted you should have 3 files.
I just wonder why the 2.2.1 ROM files do not show on that website which CSC is used, maybe it's universal or something?
Well, I guess Widget21 has a point here. If you are willing to flash now with Odin, you might be willing to do it with GB too, then the CSC won't matter (it doesn't matter much anyway as I learned).
Just be sure your 3 button combo is working and that you connect with direct USB.
Click to expand...
Click to collapse
JVO has multiCSC and UK's xeu is included in it so no need to worry about changing CSCs...remember the 'Thanks' button is there for a reason
@Unregistered: yeah, sorry, that's what I meant. If you wanna flash GB in the future you might want to do it with Odin and then the CSC shouldn't matter anymore.
For some reason, I'm unable to find out the CSC on the file and it's not listed. The JPY I downloaded from samfirmware recently has DBT as CSC (Germany). If you download the JPX file and extract it the CSC file might tell which region it is (as in my case).
@Widget21: I used my thanks feature up for today (5 max). I'll try tomorrow again.
I just downloaded this:
http://hotfile.com/dl/100618077/49a97b4/I9000XXJPY.rar.html
JPY_JPY_JPY.tar. I thought i was getting the three files. Where do i go from here

[Q] Roms with GKG3 based firmware

Hey everybody,
Im kinda new to droid development, and have played around with it a little (flashing roms, kernels, rooting etc) however, im curious why there are roms based on pretty much every other firmware other than GKG3. I might sound like a n00b for asking about this but its mainly for my knowledge. I figured KG3 would be fairly common as it is one of the North American firmwares, but I must be incorrect? Anyways any insight on this would be great. Also a quick question, seeing as I am a Bell I9000m SGS owner does it matter if I put firmware from say Europe on my phone? I have noticed that my signal decreases when I put a rom on that is JVR based? Curious if this causes my phone, seeing as the modem is being changed to JVR, to think that I am out of country and will inflict long distance charges. This probably sounds like a dumb question, and I dont really believe LD charges will apply, but some confirmation would be nice as google didnt really help me out on this one.
Thanks!
KG3 is 2.3.3 and although it was just issued to Bell and other N.American customers, the rest of the Anfroid world has been using 2.3.4 for 6 months and some have moved to 2.3.5. The roms you see here are cutting edge and most use the latest firmware. The last official and stable release was JVR a 2.3.4 firmware and there are many good roms for JVR. It is easy to keep your KG3 modem in place and the KG3 CSC file and just upgrade your system to a custom JVR kernel and JVR rom.
I tried flashing galaxian's jvr kernel and it just bootlooped so maybe I'm doing this wrong? I kept my stock modem and CSC, flashed kernel using oden, factory reset was done as well as a cache clear prior to the flash and all I'm getting is a bootloop so I'm not entirely sure what I'm doing wrong any advice would be appreciated! And again thanx for the info in the previous post!
Sent from my GT-I9000M using XDA App
yes you flashed just the kernel, you must first flash the stock rom and then any custom kernel for the same firmware -- you need the stock rom to install the correct bootloaders prior to flashing the custom kernel
so in odin, flash JVR stock in pda, KG3 in phone and CSC
tick auto re-boot
then flash the custom kernel of choice in odin under pda
Awesome thanks for the tips! Will give this a try
Hi guys - you guys might be able to help with a wee problem.
upgraded FW today via kies to 2.3.3 KG3 from froyo 2.2 with speedmod kernel.
in the process though i lost root but worse is i now don't have 3BR, when i used to. I still have 3 button download mode though.
I want to root again and flash a different kernel (for root but also for performance/tweaks) but worried to without 3BR ie. how will I access tweaks/enable root etc without it!?
Any ideas/advice please? Thanks
first flash a complete 2.3. firmware, either 2.3.4 JVR or 2.3.5 JVT. This should re-install basic 3BR functionality. I think you have not got the necessary bootloaders in the jump from froyo to GB and a complete stock install should correct this. Do tick re-partition and use 512 pit, do check auto-boot: let the phone boot and right itself. Check for 3BR and do a system reset.
Then flash KG3 modem and CSC. Your phone should then be functional.
Then flash a kernel with root inbuilt to it.
If you use the GTO Tornado kernel you can also clean your system completely as this stage instread. If you use another kernel, do the factory reset, davlik cache clean etc. prior to flashing the kernel as suggested above.
Do the clean prior to re-installing your apps.
lgsshedden said:
first flash a complete 2.3. firmware, either 2.3.4 JVR or 2.3.5 JVT.
Click to expand...
Click to collapse
Thanks! will give this a go but have only ever really flashed a kernel before with odin so want to be doubly sure about these steps if that's ok? apologies for my noobish ignorance
- only found a 2.3.4 JVR at samfirmware - getting this and the 512pit file. This should be fine?
- then flash a KG3 modem and CSC - any idea where I get those files from? - the ones i've got now i only got through kies (and when i do get em, when i do this in odin do i only use the phone/csc boxes and leave pit empty/uncheck re-partition?
thanks again mate.
Edit: forgot to say my reason for questioning the JVR is because the one i have is listed as European...where as I have a bell mobility but in australia - does this matter? latest FW for aus/america is JVN 2.3.3
no problem: always better to ask for help first then assitance fixing a problem when it all goes pear shaped.
There is a thread on the KG3 firmware with lots of these questions answered: http://forum.xda-developers.com/showthread.php?t=1211939 and also the basic resource for firmware posted by Ramad here: http://forum.xda-developers.com/showthread.php?t=1102881 -- scroll down and you will find KG3 under N.American, he also has a nice set of illustrations for using odin.
You can also source a cwm zip for the KG3 modem from perka's stash here and on the market (free app) -- useful to havce the modem in cwm zip form as then you can just install a new stock firmawre such as JVR or JVT and add the modem in recovery.
lgsshedden said:
no problem: always better to ask for help first then assitance fixing a problem when it all goes pear shaped.
Click to expand...
Click to collapse
Thanks so much again - that looks like a hefty bit of reading to be done there via your links so before I do that, just one more Q please - and apologies if the answer for this is somewhere in the links you've provided.
i was just trying to read up about why the samfirm file extracts only to a single .tar file called JVR_JVR_JVR and how to use that in Odin and came across this thread:http://forum.xda-developers.com/showthread.php?t=1075278
my Q is - in this thread he makes a strong point of stating not to tick repartition and not to put the .pit file...but you say to do so.
am i missing something obvious?
well different people different perspectives on re-partition and pit.
Tick re-partition and flash the pit file. Leave it un-ticked and do not flash pit file. That's the only key: do one or the other.
As I understand it, the reason to re-partition is that it re-sets the base file system upon which you are now flashing the stock firmware -- seems a basic step whenever you move firmware versions e.g. 2.2 to 2.3, 2.3.3 to 2.3.4 to 2.3.5 -- not so much if you are installing a rom or kernel within that family of firmware.
Since I always then convert the file system to ext2 to speed up the system and I use damain's kernel to clean the system, I do use the pit file whenever I flash a new stock firmware to clear the basic file system and further aid removal of legacy files that could complicate the install.
---------- Post added at 09:28 PM ---------- Previous post was at 09:24 PM ----------
BTW the samfirmware files do extract using 7zip into the component parts for use in odin: pda (rom) phone (modem) and CSC. You then flash a custom kernel in the pda section if you use one for performance and root.
thanks lgssheddon, for the info here and in the PM.
Will crack on now with reading all the links you provided.
I just have to say a big fat D'oh! - why oh why could I not find the answer to what was bothering me most ie. apparent loss of recovery mode. The very first post in the first thread you linked gave me the answer - that it is now a 2BR (and tried it on my phone et voila, by magic I can get into recovery again!). Don't know how I could not find this thread even when I searched "KG3"!!
Thanks again for your help. i'l llet you know how i get on once i digest all this info
doktorV said:
Hi guys - you guys might be able to help with a wee problem.
upgraded FW today via kies to 2.3.3 KG3 from froyo 2.2 with speedmod kernel.
in the process though i lost root but worse is i now don't have 3BR, when i used to. I still have 3 button download mode though.
I want to root again and flash a different kernel (for root but also for performance/tweaks) but worried to without 3BR ie. how will I access tweaks/enable root etc without it!?
Any ideas/advice please? Thanks
Click to expand...
Click to collapse
The 3 button recovery has changed for KG3. I believe it used to be upvol home and power. I do believe now it is volup, voldown, and power. This should work for you to get you into recovery to flash whatever you like. Also the samfirmware for JVR is branded with Swisscom and doesnt work very well for using it with a KG3 modem and CSC, with my experience anyway. I would recommend to go to a JVQ PDA and use KG3 for your Phone and CSC. Also after you have installed this make sure to check what your country code is and install it. Hope this helped
lgsshedden said:
[/COLOR]BTW the samfirmware files do extract using 7zip into the component parts for use in odin: pda (rom) phone (modem) and CSC. You then flash a custom kernel in the pda section if you use one for performance and root.
Click to expand...
Click to collapse
The firmware that he is referring to doesn't. It is only one file meant for the PDA section of ODIN. Not entirely sure why they did this but i was running into problems with it as well. If you know how to play around with the core files you could in theory extract it to its root and put multiple files into .tar files (ex. select factoryfs.rfs, param.lfs etc. and place it under one .tar) but thats a lot of playing around and potentially dangerous if not done correctly.
not sure which download you are referring to but there was a branded version of JVR and a generic one on samfirmware: I have the one that does not have the swisscom logo and it certainly was extracted by 7zip into its component files (pda/phone/CSC) as they are still on my pc in that format.
You can also source stock firmware from Ramad's thread.
And I stand by my comment that for anyone using KG3 as a modem, JVR is the most stable official release available, much better than JVQ. JVT has a lot of promise and will be a better firmware than JVR but it is not yet had all the bugs sorted and while there are Gold Rom version for JVR any JVT rom is still at a beta stage and should not be used yet by someone just starting to flash custom firmware (IMO).
Hi again,
Q for lgssshedden really but if anyone can help i'd appreciate it!
have had 2 crashes now with Tornado Aureus RC1 - few little bugs/glitches eg with ringtone changing etc then on a reboot it won't go past the Tornado start screen with the big flame.
First time I just reflashed stock KG3 then reflashed the Tornado kernel, no problem. This time when I try to flash the Tornado kernel (either Aureus RC1 or Gold) it just bootloops at startup even though the flashing seems to go ok.
So now i'm back to (yawn) stock KG3 2.3.3. Really just want to root it again but with Tornado not seeming an option i'm finding it hard where to turn to root.
Thanks in advance!

[Q] An advice please...ROM for GT-P1000

Hello everybody
I have Galaxy Tab 7" GT-P1000 WiFi/3G
Model number:
GT-P1000
Firmware version:
2.2
Baseband version:
P1000JXJM2
Kernal version:
2.6.32.9
[email protected] #1
Build number:
FROYO.JVJM5
Click to expand...
Click to collapse
As you see it's the old good froyo, but I think it's time for changing
And that's my question, To WHAT ?
First, you have P1000, that means you have phone functionality. Not only wifi/3G.
Second, there are many posts asking theis questions over and over again...
and usually Priyana answers them with the exact answers. So I'm going to borrow his/her answer:
Go to team overcome and follow their installation instruction "From froyo"
http://www.teamovercome.net/
There you will have a choice "GB-Stock-safe" (Gingerbread stock pre-rooted)) and Overcome Rom (Based on GB2.3.6 pre-rooted).
if you want to try the new ics later on, I suggest install gb-stock-safe and continue install the overcome KERNEL only. Don't install Overcome ROM.
The instruction maybe overwhelming and you may get bootloops if you do a wrongthing. So follow it carefully.
G
Thank You
I know that post of teamovercome forum and still have headache from reading it
It's very complicated so I think it's good idea to stay with the Froyo.
I guess sticking to Froyo will work.... but I think there are more apps available if you are on ICS...
Sent from my GT-P1000 using XDA
nurusz said:
Thank You
I know that post of teamovercome forum and still have headache from reading it
It's very complicated so I think it's good idea to stay with the Froyo.
Click to expand...
Click to collapse
Then I think you're on wrong site and should stick yo updating through Samsung Kies.
I'm on the right site
TheATHEiST said:
Then I think you're on wrong site and should stick yo updating through Samsung Kies.
Click to expand...
Click to collapse
I think you're wrong and I'm on the right site
I'm a beginner as you was a long time ago.
By the way, does the Kies can update the firmware to some thing else than Froyo ?
I don't think so
nurusz said:
I think you're wrong and I'm on the right site
I'm a beginner as you was a long time ago.
By the way, does the Kies can update the firmware to some thing else than Froyo ?
I don't think so
Click to expand...
Click to collapse
Hey man, you need to decide if you want to do more with your g-tab or not.
BUT words of warning: DON'T jump into the swimming pool if you're afraid getting drowned.
I was exactly like you just last year and of course as everyone else here, I started by simply learn how to root my Tab. With froyo, it is as easy as ONE MOUSE CLICK after you downloaded the correct .exe program on your computer.
Most countries already get GB upgrades via Kies ranging from 2.3.3 to 2.3.6. Some unlucky countries stuck in froyo and that's when they come to xda forum to learn new things.
THANKS
My Tab is already rooted.
What you means by " ranging from 2.3.3 to 2.3.6", the kernal version or the firmware version ?
I upgraded once time only using the Kies but it's still Froyo as you see in my post.
You are right abut the swimming therefore I need to prepare myself good enough to start that process.
the best roms!
try these two masterpieces of dizgustipated:
boca msi
or
blindmooke
just go to the respective rom's thread in this section for instructions.
but first, as the posters before me said, you have to follow the instructions in www.overcome.net. when you get to the part of flashing the rom, use the above-mentioned roms instead of overcome.
happy flashing!
Here, a very easy to follow going to Gingerbread stock, follow carefully:
You can download any official firmware at http://fus.nanzen.se/
1a. Download Fus Check Downloader 2.1 from the above site. Using the Fus Check downloader, download a Firmware for your region. It will automatically decode the .enc2 file to.zip file
(For your case choose GT-P1000)
Extract .zip file to get .md5 or .tar
1b. Download Odin3-v1.85
1c. Download this pitfile from following link:
http://forum.xda-developers.com/attachment.php?attachmentid=631856&d=1308653969
1d. Download this dbdata from the following link:
http://forum.xda-developers.com/attachment.php?attachmentid=935230&d=1331091172
2. Start Odin - put the .md5/.tar to PDA
Put the pitfile from step 1b to the PIT
Check re-partition. Leave everything else as is.
3. Go to download mode on the G-tab, connect to ur computer
and click start on Odin. It takes about 6 to 7 minutes to do the flashing.Once done flashing it will reboot but mostlikely you still have problems with your tab.
4. Reboot to download mode again. Reset Odin (make sure re-partition unchecked), put dbdata from step 1c to PDA, leave everything else as is. Reconnect your G-Tab to computer, click start on Odin.
5. When Dbdata is successfully put into your G-tab, reboot to recovery mode, do a factory reset wipe, and data cache wipe.
Reboot system, wait for about 5 minutes for the tab to boot up, you should be all set.
Note: as always, you are responsible for your own device. I'm not responsible if anybody break his/her device following the above instruction.
yappoe, Thank You very much
1- Please check the links for the pitfile and the dbdata file -Error 404 Page Not Found
2- Can I choose another country than the one where the Tab was purchased ?
3- In the zip file there is another file called SS_Dl.dll. What about it ?
Gb has better video player and music player 5.1 . Can play sky go too. Theres lots of ways to get it looking like ics. Whilst still on gb.
Sent from my GT-P1000 using XDA Premium App
nurusz said:
yappoe, Thank You very much
1- Please check the links for the pitfile and the dbdata file -Error 404 Page Not Found
2- Can I choose another country than the one where the Tab was purchased ?
3- In the zip file there is another file called SS_Dl.dll. What about it ?
Click to expand...
Click to collapse
1c. Download this pitfile from following link:
http://forum.xda-developers.com/attachment.php?attachmentid=631856&d=1308653969
1d. Download this dbdata from the following link:
http://forum.xda-developers.com/attachment.php?attachmentid=935230&d=1331091172
Try again.
Yes you can download roms for other countries. People like firmwsre for germany or netherland because they are the latest (2.3.6).
disregard the .dll file.
TNX a lot

Categories

Resources