[Q] Restoring Korean Galaxy S to 2.1 - Galaxy S I9000 Q&A, Help & Troubleshooting

Hello, i have a Korean Galaxy S, Anycall SHW-m110s,
using steps I found in this forum I upgraded it to froyo firmware DI29, using odin.
The build seems to be an incomplete build and it is quite laggy and buggy. I would like to restore and revert back to the original build, android 2.1 eclair, ECLAIR.DI03, however I'm having trouble finding out how to do that.
If anyone would be so kind as to instruct me how to do this, or instruct me as to where I might be able to find out how to do this, I would be so very appreciative.
Thank you for your time.

dkurohige said:
Hello, i have a Korean Galaxy S, Anycall SHW-m110s,
using steps I found in this forum I upgraded it to froyo firmware DI29, using odin.
The build seems to be an incomplete build and it is quite laggy and buggy. I would like to restore and revert back to the original build, android 2.1 eclair, ECLAIR.DI03, however I'm having trouble finding out how to do that.
If anyone would be so kind as to instruct me how to do this, or instruct me as to where I might be able to find out how to do this, I would be so very appreciative.
Thank you for your time.
Click to expand...
Click to collapse
I assume you flashed di29 with odin. To go back you would flash di03 with odin the exact same way. If you do not have the rom you can search for "M110S-NPS-IMAGE-REV03-DI03-1545-USER.tar" and I am sure you will find it on numerous sites. After flashing di03 you will likely have to go into recovery mode and wipe fs and cache.

U risk bricking ur phone if u revert to eclair from froyo.
Sent from my GT-I9000 using XDA App

salmanslick said:
U risk bricking ur phone if u revert to eclair from froyo.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Of course there is always a risk but I have flashed the between dg14, di03 and di29 on an shw-m110s numerous times without any issues.
From my personal experience, as long as you are only flashing the PDA portion I wouldn't worry too much.

so how do i flash bak to eclair jm1 from froyo jp6 ? i read in different posts its possible , but all those who tried bricked their phones

salmanslick said:
so how do i flash bak to eclair jm1 from froyo jp6 ? i read in different posts its possible , but all those who tried bricked their phones
Click to expand...
Click to collapse
This thread is discussing a specific model sgs, shw-m110s. It has different hardware and firmware.
You are obviously using a different model. You should ask others who use a similar model.
Sent from my SHW-M110S using XDA App

koe1974 said:
This thread is discussing a specific model sgs, shw-m110s. It has different hardware and firmware.
You are obviously using a different model. You should ask others who use a similar model.
Sent from my SHW-M110S using XDA App
Click to expand...
Click to collapse
Has anyone figured out how to do this yet? Is there another thread dealing with it?
I have used KIES to update my SHW-M110S to Froyo
Baseband Version
m110s.sj26.1950.st
Kernel Version
2.6.32.9
Build Number
Froyo.sk05
I would like to revert it to ECLAIR also. I'm desperate and flash doesn't work!
I hope someone will chime in in response with a link to help out.
Thanks.

Related

[q] still no 2.2

Hi im on samsung Galaxy S vibrant from Bell.
Im sitll running 2.1 as no update has come through Kies for me for 2.2
I am using Kies 2.##.
My current firmware version is: PDA:JM2 / PHONE:JM1 / CSC:JM1 (BMC)
If you are impatient you could download JL2 (latest official Bell upgrade) and flash with Odin.
Otherwise...make sure you have latest version of Kies, etc...never used Kies myself so I can't help you troubleshoot that a whole lot
or bite the bullet and root the phone, use some custom ROMs
It's a little scary at first, but well documented and safe/stable nowadays
Lots of good options like Darky's, Ultimate etc. I've recently been playing with Doc&Stef's RomKitchen which is stable and well documented
http://forum.xda-developers.com/showthread.php?t=817703
Could be that you are not using a Bell ROM. JM1/2 is a European ROM. The Bell 2.1 roms were jg2 and jh2. When you boot the device does it flash a screen with "GT-I9000M "?
Sent from my GT-I9000M using XDA App
I dont know how I would be using a rom thats not canadas...as my phone is from canada?
Im not experienced with this type of stuff, so what is my bets and easiest option?
which part of canada are you, i can try to explain and help u if ur near
astralmaze05 said:
which part of canada are you, i can try to explain and help u if ur near
Click to expand...
Click to collapse
Im from Vaughan(thornhill...toronto)
SENORBERNS said:
Im from Vaughan(thornhill...toronto)
Click to expand...
Click to collapse
ok i can help u i just came from work, when ur free inform me so we can meet and update ur phone
dont worry im not gonna charge u make sure u backup ur contacts and other important files

Anyone have the link to the stock froyao 2.2 official?

Title says it all. Ive tried looking through the development section and doing a serch but cant find it. I'm not looking for the deoxed ones jsut a straigh att bloatware rom.
nevermind that
TRusselo said:
heres a cwm upgrade version...
best i could find for you american... lol
I897UCJH7 - OTA System, Kernel, Modem - Clockwork Flashable - Rooted
Click to expand...
Click to collapse
that's 2.1
for some reason nobody posted a 2.2 kb1 stock rom. all us americans are too obsessed with flashing i9000 roms or heavily modded roms. the only way to kb1 stock on this board is flash 2.1 and use kies mini to update, assuming you havent messed anything up that will prevent kies from recognising the phone like info in the efs partition.
oh right... i get confused by your damn numbers... kb1...
we had JI2 (2.1.1) and JL1 (2.2)
you know how long it took me to hunt that wrong one down?
xpeppyx said:
Title says it all. Ive tried looking through the development section and doing a serch but cant find it. I'm not looking for the deoxed ones jsut a straigh att bloatware rom.
Click to expand...
Click to collapse
you want a CWM flashable version of it?
Can't he use kies? (keis, what ever it is lol)
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
I thought I saw a cappy stock ROM 2.2 on here when I soft bricked (I use a vibrant). They had all of them plus pre rooted versions and everything. Ill try to find it and post a link.
Sent from my robot vaccuum smartphone!
Here is a link. Just use the file as PDA and use your standard pit and you should flash back to stock 2.2. No problems reported either.
http://forum.xda-developers.com/showthread.php?t=963403
Here is another one..more of the same I suppose. Both are froyo stock though, and I'm pretty confident either will work. This one definitively says use 512 pit and use the tar file you download as the pda.
http://forum.xda-developers.com/showthread.php?t=751518
Caliesv said:
Can't he use kies? (keis, what ever it is lol)
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
Kies Mini, whoop there it is!
bdgiese90 said:
Here is a link. Just use the file as PDA and use your standard pit and you should flash back to stock 2.2. No problems reported either.
http://forum.xda-developers.com/showthread.php?t=963403
Click to expand...
Click to collapse
I used this one to upgrade from stock 2.1 to stock 2.2 using Heimdall a while back with no problems to speak of. The phone ended up developing the same lag as 2.1 eventually so I have since gone with one of the many lagfixed roms.

[Q] Anycall Galaxy S - bricked?

Hello,
my friend got a phone that at first sight i thought its the galaxy s i9000. but its the korean version of it with integrated dbm antenna.
but the problem he had was, that he tried to flash a gingerbread rom (for i9000) but came to me saying the phone does not boot anymore...
so i wanted to flash the correct firmware.. so i downloaded the latest one from http://m110sroms.info/ ...
but when i start the update with odin.. it stops with a FAIL at the very end of the flashing process.. i tried several times with and without closing Odin and with and without ticking repartition.. but it didnt help..
what is the problem? please help..
i downloaded another firmware but didnt worked either..
does he bricked the phone? is it possible to un-brick it?
please answers.. thanks
I don't know a lot about this, but I do know it's almost impossible to permanently brick your phone. So things could work out just fine . However someone with some more knowledge should help you out, since mine is insufficient. GL though.
i just tried almost every single firmware i found for this device but none of them worked
so please, if anyone does know a solution, feel free to post.
Maybe it's not i9000. There is a difference between models like i9000,i9000B... check it behind battery
Sent from my GT-I9000 using XDA Premium App
themate1987 said:
Maybe it's not i9000. There is a difference between models like i9000,i9000B... check it behind battery
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
yes its not the i9000 i know. its called SHW-M110S. like i said; its the korean version of the galaxy s, which has slightly different hardware.
unbenannt said:
yes its not the i9000 i know. its called SHW-M110S. like i said; its the korean version of the galaxy s, which has slightly different hardware.
Click to expand...
Click to collapse
I don't know if this helps (I can't read Korean and Chrome didn't translate it)
http://kr.samsungmobile.com/notice/anycallpopup/froyo_up.jsp
I got it from here, the comments at the bottom
http://www.samsunghub.com/2010/11/1...d-s-will-get-android-2-2-froyo-from-tomorrow/
This might be worth a look too if you haven't already seen it
http://www.samsunghub.com/tag/shw-m110s/
There's a link to a FROYO torrent here but I can't get page to display right, plus it's in Korean http://translate.google.com/translate?hl=en&sl=ko&tl=en&u=http%3A%2F%2Fmatpclub.com%2Fs%2F%3Fmid%3Dpxeboard31%26page%3D1%26document_srl%3D2429204&anno=2
Got it here
http://www.samsunggalaxysforum.com/samsung-galaxy-s-how-to/all-about-shw-m110s-(korean-version)/
Hope you find something useful in all that

[Q] German upgrade to ICS is safe?

Hi, I know there's a thread saying that the version XLPY is bricking phones. I just connected my Note to the Kies and it asked if I wanted to upgrade. I thought it was a newer version of Gingerbread, so I clicked to upgrade.
So far the phone is good, no problem at all.
(This phone was ordered on amazon.de and sent from germany).
Anyone with a german phone can confirm to me if there are problems and if I should go back to gingerbread or if it's safe to keep this ICS? Thank you,
Marco Silva.
it should be safe if upgrade thru samsung kies.
if you still afraid of that, flash another stock rom thru odin3.
http://forum.xda-developers.com/showthread.php?t=1424997
Do you speak from self experience or did you read about it somewhere?
Sent from my GT-N7000 using XDA
MarcoFSilva said:
Do you speak from self experience or did you read about it somewhere?
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
I'm not using german version, but it should be safe to use official ICS as long as you don't do factory reset or wipe in recovery. If you wanna do that juz follow the posted link.
The German version is -not- safe. I'm pretty much in the same boat, new Note owner, did the OTA update.
The Kernel version you get is 3.0.15-N7000XXLPY-CL474507
As far as I gleaned from reading on here, that version is fully capable of bricking the phone on a wipe/factory reset.
Ok thanks ill swap it then. Thanks for the help.
Sent from my GT-N7000 using XDA

[Q]

Hi All
I am from Bangladesh and looking for some HELP!!!
I have just bought one Samsung Galaxy Tab GT-P1000 from one of my friend. He used it for last one year. It was pretty much ok with all the settings. I am always little bit curious about new machines and when I got it I thought it was not updated with all the setting. Like a stupid I have tried to root it with CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS.TAR and it showed “FAIL” and went dead. After that I downloaded another file dbdata.rfs.tar and made it active again. But unfortunately everything erased down from my tab.
After that I got someone from UK who helped to setup The Overcome Experience in my Tab. Everything is fine except my IMEI what is shown fake as 004999010640000
Model # GT-P1000
Firmware Version # 2.3.6
Baseband Version - P1000XXJPZ
Kernel Version # 2.6.35.7, Overcome-v4.0.0 # 40
Build Number # Overcome 7 Series v4.1.0
I don't know what else to try. I have searched the forums here and it seems that the answer is not there or I am not in the right page.
I would appreciate any help or other ideas!!!!
Regards
Noor
The answer is there.
Usually is by flashing stock ROM.
You may want to try overcome's GB stock safe v5.
The link is in my signature.
After flashing stock, check your IMEI. hopefully it is restored.
Sent from my GT-P1000 using xda app-developers app
priyana said:
The answer is there.
Usually is by flashing stock ROM.
You may want to try overcome's GB stock safe v5.
The link is in my signature.
After flashing stock, check your IMEI. hopefully it is restored.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Hi Priyana,
Thank you so much for your quick response! The same I have followed to install my Overcome Experience (as per XDA policy couldn't paste the link here)
If you insist I can again reinstall it from your given link or if you adv to install any other operating system like gingerbread or jelly bean or any other OS. Actually frankly speaking I am very new on this. Thanks again and waiting fro your suggestion.
Regards
Noor
I don't insist.
But so far the only way to recover IMEI is either by having a backup of your efs,
Or by restocking.
Some people here couldn't get back their IMEI even after restock.
Not sure why.
But it is up to you to try or to leave it.
Upgrading to higher os won't help.
Sent from my GT-P1000 using xda app-developers app
priyana said:
I don't insist.
But so far the only way to recover IMEI is either by having a backup of your efs,
Or by restocking.
Some people here couldn't get back their IMEI even after restock.
Not sure why.
But it is up to you to try or to leave it.
Upgrading to higher os won't help.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Thanks Priyana! Actually my EFS folder is empty. Is the Overcome Experience is the latest OS?
well, overcome 4.1 (the ROM) is a modified samsung stock 2.3.6
So in a sense, yes, it is the latest that is close to the official released but better in performance.
Samsung didn't update the OS for P1000 anymore, so if you want ICS or JB, it will have to come from CM/AOKP/Paranoid etc

Categories

Resources