This is just a simple clockwork mod .zip that will install the Blackmod theme.
This version is for DL09, and includes the full power menu, and accurate battery.
www.androiddoes.net/sonofskywalker3/themes/Blackmod_EnhancedDL09.zip
Thanks:
stanrc for the blackmod theme
tigers4life and utermensh for their work on the power button options
frost for all his help with my themes
and everyone else who helped me along the way
Will this go over JT's rom with the soft key backlight already added?
ellisz said:
Will this go over JT's rom with the soft key backlight already added?
Click to expand...
Click to collapse
Yes, this is designed to replace only the theme, and it will overwrite whatever theme/mod's you already have. so if you've got the 10 or 32 seconds backlight it will change to 15. haven't added those two options to the theme yet. you may be able to flash them over this theme without it changing, but i haven't tested it. if you do let me know.
So far so good. I love the black bar and the power off options.
Thanks
I'm assuming if I flash the Accurate Battery Mod/theme that's posted in this forum (the circular battery gauge with a percentage), it will revert the top bar back to gray again like I've seen in other themes. Can you add the accurate battery mod to the theme so this doesn't happen?
Protonus said:
I'm assuming if I flash the Accurate Battery Mod/theme that's posted in this forum (the circular battery gauge with a percentage), it will revert the top bar back to gray again like I've seen in other themes. Can you add the accurate battery mod to the theme so this doesn't happen?
Click to expand...
Click to collapse
I'll take a look at it. should be able to unless it's resources overlap.
Ok, the second attachment should do it. If something is wrong with it let me know.
Thank you for this. I tried for an hour the other day to get accurate battery working on my blackmod framework, I kept getting fcs and the occasional notification bar without a battery icon.
Edit: After flashing the accurate battery .zip, I discovered it does not pull up the power menu when the button is held, just hangs for a minute and then reboots if pressed again. I'm gonna play with it when I get home and see if I can isolate the issue.
Sent from my SCH-I500 using XDA App
found an error, on mine it reboots when you hold the power button instead of pulling up the power menu. working on it. this is tougher than it looks
I flashed and reflashed this a few times(via clockwork) now to try and get it to work but I don't get the power options or soft key backlight changes. Any ideas?
*edit* I used the first .zip without the battery mod
*edit* I rethemed it after flashing the super clean rom from JT and it worked just fine. When I flashed the puzzle unlock .zip to switch my lock screen the power options changed back to stock.
sonofskywalker3 said:
found an error, on mine it reboots when you hold the power button instead of pulling up the power menu. working on it. this is tougher than it looks
Click to expand...
Click to collapse
My power menu pulls up as expected. I am using the 1st file you posted today.
ellisz said:
My power menu pulls up as expected. I am using the 1st file you posted today.
Click to expand...
Click to collapse
Thank you for the heads up. Turns out that was a mistake I made while trying to get the accurate battery mod working with it. they don't play nice together so I'll have to work on it another time, but the file without the battery mod should continue to work fine.
Do I need to disable voodoo before flashing this via clockwork?
redlinegts85 said:
Do I need to disable voodoo before flashing this via clockwork?
Click to expand...
Click to collapse
No it will work fine with voodoo.
And for anyone who wants the puzzle lock screen with this theme, you can simply create a file in /data/local named enable_glass_lock and it will turn on the puzzle screen, no need to flash a clockwork zip that will remove the power options.
Just flashed this. Love how it looks, but I don't have the reboot options in the power down menu.
.edit sorry
jbrdr985 said:
Just flashed this. Love how it looks, but I don't have the reboot options in the power down menu.
Click to expand...
Click to collapse
I haven't run into this before. Is it showing the black power down box with only 3 options, or is it still standard color?
I think I have the same problem as jbrdr985...black bar, but only the standard 3 power options.
Sent from my SCH-I500 using XDA App
mikaelchen357 said:
I think I have the same problem as jbrdr985...black bar, but only the standard 3 power options.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Try downloading it through ROM Manager and see if it works. You don't have to be on the Blackhole custom rom, just choose the themes section under sonofskywalker3 and pick Blackmod Enhanced
Have you done something like this for DJ05?
Related
I don't need a lot of added functions, but I would love the ability to go "back a level in menus"
Maybe its I am new but can find no reference to the ability.
Can anyone help?
rgreenpc said:
I don't need a lot of added functions, but I would love the ability to go "back a level in menus"
Maybe its I am new but can find no reference to the ability.
Can anyone help?
Click to expand...
Click to collapse
Not sure if you are running stock or some other mod, if you are rooted you can get the Button Savior app or Softkeys app. both present the standard android keys on the screen for you to use.
I will take a look at softkeys.
rgreenpc said:
I will take a look at softkeys.
Click to expand...
Click to collapse
I ended up using Button Savior, because its got the option of having the button displayed permanently (unless you "x" it out).
You can swipe to the left on the taskbar to go back.
I'm not running any extra virtual key apps... What I want to do... is have the physical N button do a BACK on 1 click, and HOME on 2 clicks... Or normal click BACK, and LONG click HOME...
I've looked through some of the settings - can't tell how to set that up (if at all).
Any thoughts?
Why not use the soft keys built in to CM7?
Sometimes the status bar is gone... either because something causes it to hide, or because I hide it.
MHotovec said:
Why not use the soft keys built in to CM7?
Click to expand...
Click to collapse
The best setup so far (imho), is to set the soft keys show up at volume button press.
Since the power button or N button tend to fail sometimes.
By doing that, you can hide soft keys with no fear and just presse volume button to bring they back to the screen, flawless.
@blauson
I hate doing that because if I need to change volume I need to leave the app, go into settings, and change it manually. :/
Somehow my "n" button got turned into a back button. Weird. Would much rather haave it be a menu button. but I dont even know how it changed in the first place! lol
DiscoPh3v3r said:
@blauson
I hate doing that because if I need to change volume I need to leave the app, go into settings, and change it manually. :/
Somehow my "n" button got turned into a back button. Weird. Would much rather haave it be a menu button. but I dont even know how it changed in the first place! lol
Click to expand...
Click to collapse
I run phiremod so it's in: settings, phiremod settings, tablet tweaks, choose unhide button
DiscoPh3v3r said:
@blauson
I hate doing that because if I need to change volume I need to leave the app, go into settings, and change it manually. :/
Click to expand...
Click to collapse
My volume still works when I use it to recall the status bar.
Rodney
rhester72 said:
My volume still works when I use it to recall the status bar.
Rodney
Click to expand...
Click to collapse
Really? Then I will have to see what's up, last time I was always running around the settings and stuff to change the volume.
Blue6IX said:
I run phiremod so it's in: settings, phiremod settings, tablet tweaks, choose unhide button
Click to expand...
Click to collapse
I am using Rooted Stock 1.2, way better battery life IMO.
rhester72 said:
My volume still works when I use it to recall the status bar.
Rodney
Click to expand...
Click to collapse
I second on that.
I'm running nightly 131.
No problem to change the volume neither to show up soft keys.
I use the N key to cancel full screen. Its more comfortable to use than the volume keys for me.
Hrm.. that would work... Where do I configure what the N key does?
dalingrin said:
I use the N key to cancel full screen. Its more comfortable to use than the volume keys for me.
Click to expand...
Click to collapse
dalingrin said:
I use the N key to cancel full screen. Its more comfortable to use than the volume keys for me.
Click to expand...
Click to collapse
This is how I've been doing it as well, but sometimes it brings me all the way back to home after showing the status bar. Do you ever experience that? Any tips if so?
Regardless, I like my volume buttons to be... well... volume buttons.
You could use button savior to have a never-hide home only option button located on the very right side by the N button, leaving that slot unused on adw launcher and treat it as a "permanent" home button.
TheAmazingDave said:
This is how I've been doing it as well, but sometimes it brings me all the way back to home after showing the status bar. Do you ever experience that? Any tips if so?
Click to expand...
Click to collapse
That's precisely why I haven't used the n button - if there is a way to avoid it, that would be fantastic!
Rodney
The best thing I ever did was install zMooth. Its a gesture bar that lets you draw the buttons. Almost like my old pre.
Sent from my NookColor using XDA Premium App
jeremymahoney said:
The best thing I ever did was install zMooth. Its a gesture bar that lets you draw the buttons. Almost like my old pre.
Click to expand...
Click to collapse
Looks interesting, but the only gesture I can manage to make it recognize is home. Any special tricks to this?
Rodney
It has always worked well for me. Have you used the nook screen recalibrate app? Before I ran that I had a really hard time getting the lower part of my screen to recognize my touch. I think there are some sensitivity settings in the zMooth app you can play around with too.
Sent from my NookColor using XDA Premium App
hi all... bloody theme for tab P6800
What's new
Launcher2
http://www.mediafire.com/?j2e6c4j8j0qa6na
Copy the (Launcher2) files to System > app
Copy the (com.google.android.googlequicksearchbox-1) files to data > app
Status Bar themes & Battery
Copy the downloaded files to sdcard (/sdcard/) and flash via recovery mode
http://www.mediafire.com/?661eousbo4s2ss2
Good, close to OLED friendly.
Is there a way to get rid of the "google" and microphone in the upper left or to make the color yellow (to avoid burn in)?
If the white/grey in the pop up settings screen in lower right could be changed to yellow that would prevent burn too.
Also if the "APPS" and the + sign in upper right could be made yellow (no blue component) Then we would have a fairly burn-in free screen.
Thanks.
Also what all does this change? Just the stuff shown in the picture?
Very nice theme.. but letter (H) of hsdpa icon in status bar still blue , would you make it red please
Better but I am more concerned with the microphone next to the Google in the upper left corner of the screen as that is always on.
How exactly do I load this in a step by step instruction? I am not very experienced in this. I am not sure how to go to recovery and load this.
Where are these graphics located, I could edit the ones I want if needed.
DaveC1964 said:
Better but I am more concerned with the microphone next to the Google in the upper left corner of the screen as that is always on.
How exactly do I load this in a step by step instruction? I am not very experienced in this. I am not sure how to go to recovery and load this.
Where are these graphics located, I could edit the ones I want if needed.
Click to expand...
Click to collapse
Turn off your devise
press The volume up button + power
use volume up and down to move
use the power button for apply
now go to
1 apply update from external storage
2 choose Theme zip from sdcard
3 reboot
ssaass said:
Turn off your devise
press The volume up button + power
use volume up and down to move
use the power button for apply
now go to
1 apply update from external storage
2 choose Theme zip from sdcard
3 reboot
Click to expand...
Click to collapse
Thanks, where are the graphics stored? I want to get rid of the white microphone and APPS + on the top of the screen and replace with yellow.
Can your file be used with wifi only 6810 version?
Hello.. i'm very interested on your work.. could you make the light green color theme instead of red? Only on the wifi and battery icon.. i wanna keep the gray icons for the rest of status bar icon..
Sent from my GT-P6800 using xda premium
hi ssaass i have installed you theme and was using this with my stock rom with no problem
but after using magnolia beta rom i am missing my notification bar after flashing your bloody theme ? do you have a fix for the magnolia beta rom really love your theme hope someone can make a workable one don't really know why it's not working anymore
link broken
Sent from my GT-P6800 using xda premium
Im working on porting gweedo767's touch recovery to the incredible. I do not own an incredible so i need people to give me feedback so i know what to change. Once i get a good working fakeflash i will release an installable recovery image. If anyone wants to donate to me for me to get my own incredible that would be much appreciated and will make the process quicker.
Here is a youtube video I made of how it works: ------> VIDEO
4 ways to use recovery:
volume rockers
soft keys on bottom of screen
capacitive buttons
swipe gestures (up/down = scroll && left = back && right = select)
This will not install ANYTHING on your phone. It is just a test drive to see what it is like. This loads the files into the ram and runs them from there. As soon as you reboot everything will be back to the way it was. This does not change/alter ANY files on your phone.
I need to know what sort of things i need to change like:
swipe sensitivity
font size
order of soft keys on bottom of screen
anything else......
Please let me know how i can make this better
Click to expand...
Click to collapse
Here is the link to a FAKEFLASH: --------> http://sk8erwitskil.com/guest/skyrocket/CWMRT/inc/cwmrt-inc.zip (flash in CWM)
There is a known bug in ClockworkMod 5.5.0.4 that long file names can POSSIBLY cause backups to hang. There is a solution/workaround:
boot into recovery
try to make a backup (no matter if it passes or fails proceed to next step)
either through terminal emulator or through adb run the following command EXACTLY:
Code:
touch /sdcard/clockworkmod/.hidenandroidprogress
NOTICE THE PERIOD AND LACK OF EXTENSION.
and it is .hidenandroidprogress NOT .hideandroidprogress __notice the letter "n"__
Click to expand...
Click to collapse
Hello i tried your recovery and it has a few issues one being major. First off the up scroll button (the one that looks like a house) seems to select items instead of scroll up in the list. Also while on the subject of the buttons imho there a little small, and would look better more rounded, perhaps just putting a ring arround them.
If you swipe to the right on the screen it reboots the phone.
Ok now on to the major issue, it only backed up boot, system, and recovery. It did not back up data, datadata, cache, sd-ext, android.secure, or generate an md5 sum.
Other that that its good. It is not what i was expecting when i tried it. I was expecting to touch on the menu where the options are instead of using softkeys to navigate and select, but i still like this better than having to use vol keys and trackball, great job so far.
cmlusco said:
Hello i tried your recovery and it has a few issues one being major. First off the up scroll button (the one that looks like a house) seems to select items instead of scroll up in the list. Also while on the subject of the buttons imho there a little small, and would look better more rounded, perhaps just putting a ring arround them. Ok now on to the major issue, it only backed up boot, system, and recovery. It did not back up data, datadata, cache, sd-ext, android.secure, or generate an md5 sum. Other that that its good. It is not what i was expecting when i tried it. I was expecting to touch on the menu where the options are instead of using softkeys to navigate and select, but i still like this better than having to use vol keys and trackball, great job so far.
Click to expand...
Click to collapse
It is touch... You swipe to scroll. Swipe your finger up and down to scroll. Swipe right to select and SWIPE LEFT to go back. And thank you for your feedback.
Edit: and also that backup issue is a bug in clockworkmod. You have to put a file call:
.hidenandroidprogress in the /sdcard/clockworkmod/ folder. Notice the period and lack of extension.
Sent from my SAMSUNG-SGH-I727 using XDA App
sk8erwitskil said:
It is touch... You swipe to scroll. Swipe your finger up and down to scroll. Swipe right to select and SWIPE LEFT to go back. And thank you for your feedback.
Sent from my SAMSUNG-SGH-I727 using XDA App
Click to expand...
Click to collapse
Ok i see let me try this again.
Ok now i get it. Lol ok then heres my bug report.
Swipe left and right are way to sensitive. When scrolling up and down if you go just the slightest bit to the left or right, it either goes back or selects an item.
As i said earlier the up softkey selects items instead of moving up in the list.
Also as i said earlier not backing up everything or generating an md5.
Other than that it seems great.
cmlusco said:
Ok now i get it. Lol ok then heres my bug report.
Swipe left and right are way to sensitive. When scrolling up and down if you go just the slightest bit to the left or right, it either goes back or selects an item.
As i said earlier the up softkey selects items instead of moving up in the list.
Also as i said earlier not backing up everything or generating an md5.
Other than that it seems great.
Click to expand...
Click to collapse
i added the fix to the backup problem in the OP. add that file and itll solve that issue. that is a known issue in the base code of clockworkmod 5.x, im working on making a code fix for that. the workaround works fine for now tho. can you tell me what the "home" "menu" "back" & "search" capacitive buttons do in recovery? that way i can re-arrange the soft keys to line up with the corresponding capacitive button.
im guessing back = go back, search = select, but does home = scroll up or scroll down?
thanks
sk8erwitskil said:
i added the fix to the backup problem in the OP. add that file and itll solve that issue. that is a known issue in the base code of clockworkmod 5.x, im working on making a code fix for that. the workaround works fine for now tho. can you tell me what the "home" "menu" "back" & "search" capacitive buttons do in recovery? that way i can re-arrange the soft keys to line up with the corresponding capacitive button.
im guessing back = go back, search = select, but does home = scroll up or scroll down?
thanks
Click to expand...
Click to collapse
Home scrolls down, menu does nothing just vibes, back goes back, search selects. Also the on screen back key seems to select instead of go back like the on screen up key does.
EDIT: actually the menu button seems to go back also. Its hard to tell. I think when hitting home, menu, back, search, it is also picking up my finger slightly moving left or right when i hit it.
Also for the backup fix, that is just creating a file called .hiddenandroidprogress right? That file was already present in my cwm folder before i ever even tried this recovery. I ran the command anyways and tried to back up again but still only boot recovery and system.
cmlusco said:
Home scrolls down, menu does nothing just vibes, back goes back, search selects. Also the on screen back key seems to select instead of go back like the on screen up key does.
EDIT: actually the menu button seems to go back also. Its hard to tell. I think when hitting home, menu, back, search, it is also picking up my finger slightly moving left or right when i hit it.
Click to expand...
Click to collapse
ok i updated the file. the soft keys on screen should be fixed to at least be the right keys. im going to re-arrange the order to those of the capacitive once i get to my work computer tomoro. also, i made the left/right sensitivity lower. see how it works.
cmlusco said:
Also for the backup fix, that is just creating a file called .hiddenandroidprogress right? That file was already present in my cwm folder before i ever even tried this recovery. I ran the command anyways and tried to back up again but still only boot recovery and system.
Click to expand...
Click to collapse
yes .hidenandroidprogress. what it does is stop cwm from enumerating the file list that it is backing up. if it gets stuck after that then i have to go in and debug the filesystem points i have probably as they are wrong for data, etc.
sk8erwitskil said:
ok i updated the file. the soft keys on screen should be fixed to at least be the right keys. im going to re-arrange the order to those of the capacitive once i get to my work computer tomoro. also, i made the left/right sensitivity lower. see how it works.
Click to expand...
Click to collapse
Still to sensitive left to right, and the on screen up key still goes back instead of up in the list.
cmlusco said:
Still to sensitive left to right, and the on screen up key still goes back instead of up in the list.
Click to expand...
Click to collapse
Agreed, havent totally tested though.
Nice having a touch option. Desire has CWmod touch and another one.
Sent from my Droid Incredible using Tapatalk
72ls1 said:
Agreed, havent totally tested though.
Nice having a touch option. Desire has CWmod touch and another one.
Sent from my Droid Incredible using Tapatalk
Click to expand...
Click to collapse
My wifes evo 4g has it too, but its where you touch the words on the screen instead of swiping or using soft or on screen keys.
im updating the base code to fix alot of bug fixes. will update soon
sk8erwitskil said:
im updating the base code to fix alot of bug fixes. will update soon
Click to expand...
Click to collapse
When you make updates, can you provide change log with dates so we know when you updated it.
Thanks
72ls1 said:
When you make updates, can you provide change log with dates so we know when you updated it.
Thanks
Click to expand...
Click to collapse
Yes definitely. I have actually stopped doing anything for now since I'm getting an incredible in a few days so I can do my own testing. It was getting too difficult doing all my testing over the Internet lol. I'll be back with another version in about a week. So until then....
Sent from my SAMSUNG-SGH-I727 using XDA App
sk8erwitskil said:
Yes definitely. I have actually stopped doing anything for now since I'm getting an incredible in a few days so I can do my own testing. It was getting too difficult doing all my testing over the Internet lol. I'll be back with another version in about a week. So until then....
Sent from my SAMSUNG-SGH-I727 using XDA App
Click to expand...
Click to collapse
cant wait to see what you come up with.
Trying this, may I ask what to do if I don't like this? How would one go back to the regular CWM?
Sent from my HTC Droid Incredible -
Clutch 3.5 - Sense 4.0 Theme
withbloodskies said:
Trying this, may I ask what to do if I don't like this? How would one go back to the regular CWM?
Sent from my HTC Droid Incredible -
Clutch 3.5 - Sense 4.0 Theme
Click to expand...
Click to collapse
Try re flashing from ROM Manager.
withbloodskies said:
Trying this, may I ask what to do if I don't like this? How would one go back to the regular CWM?
Sent from my HTC Droid Incredible -
Clutch 3.5 - Sense 4.0 Theme
Click to expand...
Click to collapse
This is only a bootable test, it changes nothing on your phone. You flash this it temp boots to the touch recovery, and then when you exit the touch recovery you will be exactly the way it was before flashing it. It is not permanent.
This mod enables onscreen soft keys (THANKS TO LEONARDOARAUJO for the modded framework-res) and disables all cap keys except for menu. cap keys still are illuminated, but home, back, and search are disabled as well as haptic feedback for the 3. as i cannot as of yet get a search key remap working i decided to try n make this.I kinda like it btr even tho i lose a lil real estate cuz soft keys are cool..tested and working fine.
25b/27
http://db.tt/xgjybJJi
7.29
http://db.tt/MTzyaNk7
7.29
disable ALL cap keys by quetzalcoat12345 (Does not include the framework files, just the keymap files, so it should be good for all future releases.)
DisableAllCapacitiveKeys.zip"]https://dl.dropbox.com/u/19567156/DisableAllCapacitiveKeys.zip"]DisableAllCapacitiveKeys.zip
here is a flashable zip to reverse the mod (25b/27 only) by leonardoaraujo:
http://www.mediafire.com/?ch4kxk9heylr0v5
Until the backlight params editing is backported to CM10, you might want to try Screen Filter. I used that app since CM9 to disable the backlights on the capacitive buttons. Cheers!
Edit: Scrap that. It seems that it doesn't work (yet) on CM10. I'll try searching for something else.
Edit 2: Success! Adjbrightness works flawlessly!
quetzalcoatl2435 said:
Until the backlight params editing is backported to CM10, you might want to try Screen Filter. I used that app since CM9 to disable the backlights on the capacitive buttons. Cheers!
Edit: Scrap that. It seems that it doesn't work (yet) on CM10. I'll try searching for something else.
Edit 2: Success! Adjbrightness works flawlessly!
Click to expand...
Click to collapse
imma try it now, although i may leave them on only cuz my.menu key is active still..thx for the tip!
edit..works great.wish i could kill all but menu..but i suppose people in hell want icewater too
[m]atRix
Yeah, I noticed you left the menu button enabled. I've edited mine to disable the menu button as well, so it's all off for me.
quetzalcoatl2435 said:
Yeah, I noticed you left the menu button enabled. I've edited mine to disable the menu button as well, so it's all off for me.
Click to expand...
Click to collapse
i left mine on cuz there are times and places i need to enter menu but the 3 dots aren't there. maybe leo can add menu to the soft keys, ill ask.
In what app(s) does that occur? I haven't checked every app on my phone, but it's all good so far. The 3 dots show up either next to the soft buttons or on the actionbar.
quetzalcoatl2435 said:
In what app(s) does that occur? I haven't checked every app on my phone, but it's all good so far. The 3 dots show up either next to the soft buttons or on the actionbar.
Click to expand...
Click to collapse
actually now tht im paying attn, i think its mainly from home screen using apex. i can set a shortcut but i jus kinda like having menu access rt there. works for me
edit: ur right..menu 3 dots thing is there anytime there is a menu to access, EXCEPT apex home screen. but sometimes its up on top. i thought about disabling menu but decided to keep it as its nice to have rt there, i guess for the same reason i like the search key to recents remap..more easily accessible.
What if we want to revert back to using the softkeys after flashing this? is there a way to reverse it?
zefir738 said:
What if we want to revert back to using the softkeys after flashing this? is there a way to reverse it?
Click to expand...
Click to collapse
just reflash CM10 without wiping data, should bring everything back to stock.
need not apply the full rom, to undo everything (including navigation buttons):
http://www.mediafire.com/?ch4kxk9heylr0v5
ps: op, add to the 1st post ..
is the softkeys able to change functions? such as adding screen lock button or other applications in the nav bar
and can we enable the 4 capactivie buttons in the modded framework?
bu14 said:
is the softkeys able to change functions? such as adding screen lock button or other applications in the nav bar
and can we enable the 4 capactivie buttons in the modded framework?
Click to expand...
Click to collapse
not as of now. well i cant anyway, maybe leo can..
as far as screen lock button, i use widgetsoid for tht
rickriego said:
not as of now. well i cant anyway, maybe leo can..
as far as screen lock button, i use widgetsoid for tht
Click to expand...
Click to collapse
how can i contact him?
bu14 said:
how can i contact him?
Click to expand...
Click to collapse
search the forums for leonardoaraujo his profile will pop up a few lines down. u can pm from there
I hope you update your zip to the new epinter
Sent from my MB860 on CM10
i will, already talked to leo abt the framework..
[m]atRix
mod works w/ epinters current release!
[m]atRix
rickriego said:
mod works w/ epinters current release!
[m]atRix
Click to expand...
Click to collapse
Update the OP.
Sent from my Nexus 7
Soldier-2Point0 said:
Update the OP.
Sent from my Nexus 7
Click to expand...
Click to collapse
aye aye captain!
edit: done
[m]atRix
Soldier-2Point0 said:
Update the OP.
Sent from my Nexus 7
Click to expand...
Click to collapse
Geez soldier lol
Sent from my MB860 using Tapatalk 2