Related
Ok I had the latest 1.61 update (I think that was the version), followed the instructions at
http://wiki.xda-developers.com/index.php?pagename=HTC_Dream_Rooting
To the letter however now I am thinking that I have a rogers dream.
I downgraded to rc 29 and followed the directions flashing with CyanogenMod 4.2.12.2
When booting I get stuck at the g1 boot screen, going into bootloader mode looks different than before instead of the colors I get three android icons at the bottom on a skateboard and in a yellow line says serial IO.
I'm kinda lost at this point can anyone help? I pray I didn't brick my phone.
I'm pretty new to Android, recently switched from WM. Be gentle...
can u go into recovery mode? home + phone button
p.s. mind you that this isnt the proper place to be posting "problems"
wrong section, sorry
i will request it be moved to the correct section where you are more likely to get a useful reply
oops, sorry about the section...I know better than that =( I can access recovery mode. Problem is that sd card is no longer recognized by computer =( Was hoping there was something stupid and small I missed but looks like I'll need to get a new sd card and re-flash update to original.
Are you able to go to recovery console if yes go to recovery console and flash the rom again.
sounds like u killed ur sd card :-x and your sd card is exactly what was allowing the rom to boot... it was a hero rom wasnt it lol
nevermind i reread your post...doesnt sound like a cyan caused problem....but cyanogen requires you to flash something before u flash his newer stuff...you should pay attention to BaconMod's stuff
Did you flash the 1.6OTA update from HTC that is required first?
Well Looks like I killed the sd card somehow. I put the sd card into my camera and back into my phone and works fine now...go figure.
dragonedge said:
Well Looks like I killed the sd card somehow. I put the sd card into my camera and back into my phone and works fine now...go figure.
Click to expand...
Click to collapse
hey add me to my gtalk and i helo u step by step i think i know what u did cuz the same thing happened to me when i rooted the first time and those guys are being rude so if u want my help this is my gtalk [email protected]
Hi guys, my first post here (although have done some reading in the past year) and in dire need of some help. Last night I tried to root my phone. I followed instructions from a sticky post on here, and from another sticky post on another forum.
Before going through how I got there, I'll state what condition my phone is right now, as this may be more reader friendly. I turn on the phone and get the fastboot screen (tricolour). I can reset with call+menu+power. Goes back to bootscreen. Only way to turn off the phone is to remove the battery. If I press trackball+power, a blue LED comes on, the screen stays black. Turning on the phone with camera+power doesn't make a difference. Turning on the phone with home+power doesn't make a difference.
The screen, on turning on, says the following:
'DREA110 PVT 32B RUUNBH
HBOOT-0.95.0000
CPLD-4
RADIO-1.22.12.29
Sep 2 2000
Serial0'
Before it gets to the screen, the screen briefly flashes white and says
'Loading...
No image file!'
I'll try to decribe what exactly I did leading up to this in as much detail as possible, however it took place from 11pm to 4 30 am, and not fully understanding the whys behind what I did, I may not be able to recall it perfectly. Please ask if I haven't provided enough details. I installed the earliest android software and did the telnet commands through telnet, downloaded on the market. I downloaded an app called root.apk and followed the instructions. I got to 'Step 3 - Protect Root' and it said 'Root Protected'. I then got JesusFreke's 1.5 EU rom and renamed it 'update'(.zip) and placed it in my root SD card directory. I loaded the software on. I THINK the mistake I made was not having the radio image (I don't even know what it is or why I need it) before trying to load it. I've since put it on and it hasn't made a difference.
Anyway, I turned on the phone after the install, and it became stuck on the android screen. At this point, home and power and camera and power both worked to provide me with different boot screens when turning on the phone. I did a hard reset. This brings me to where I am now.
Is my phone bricked? I read on a guide here the difference between soft and hard bricking - from what I understood, this seems to be somewhere in between - hopefully if it's a brick it's a soft brick! Any help would be much appreciated, as we all hate to live without our G1's, lol! Looks like I'll be going back to my Nokia 6210 and trying to send this thing for replacement back to T-mobile. Please help guys!
Many thanks
Michael
search around the forums, as far as i know, if you can get to the fastboot, your g1 isn't bricked
Yep, agreed.
In my old G1 days I had the same problem and it was because I didn't have an image file on my SDcard.
You're not bricked but I've since gone from G1 to Hero to Nexus so I'm not what you need to do but it is SIMPLE, I remember kicking myself when I sorted it.
HTH.
thanks for the prompt response guys. Very relieved to hear that it might not be bricked.
I just tried adding two separate image files (one at a time) to the root directory, but it hasn't made a difference. These are the details of what I added:
First I put in all three of these:
Android 1.5
Radio Image ota-radio-2_22_19_26I.zip 9181622 aeecdb49b74a0d4bb67f9d8af70c1889
System Image signed-dream_devphone_userdebug-img-150275.zip 38027127
5ca85a135ff1ddd41643237577cb8ec4
Recovery Image signed-dream_devphone_userdebug-ota-150275.zip 46907411 01c19785eef97b06409f52fed568feff
and then the system image for 1.6 just in case. Is this a noob mistake? I'm very unfamilar with system images, would be really great if someone could link me to the file I should try and put there for the image file!
Thanks again guys
well since it goes into fastboot, is there a way you can flash the recovery in fastboot, and try from there?
sakumaxp said:
well since it goes into fastboot, is there a way you can flash the recovery in fastboot, and try from there?
Click to expand...
Click to collapse
I'd certainly love to try any ideas how I'd do that? If you let me know i'll do it now. atm i'm not aware of any buttoms/commands which work in fastboot, but I've never used it tbh.
yeah to be honest, im not sure how to do that either, i just remember i was lurking around this forum and i saw a previous thread, that had a similar problem and someone mentioned the tip i gave you, so if any senior members or anyone know how to do this, please explain
Tranquility__89 said:
thanks for the prompt response guys. Very relieved to hear that it might not be bricked.
I just tried adding two separate image files (one at a time) to the root directory, but it hasn't made a difference. These are the details of what I added:
First I put in all three of these:
Android 1.5
Radio Image ota-radio-2_22_19_26I.zip 9181622 aeecdb49b74a0d4bb67f9d8af70c1889
System Image signed-dream_devphone_userdebug-img-150275.zip 38027127
5ca85a135ff1ddd41643237577cb8ec4
Recovery Image signed-dream_devphone_userdebug-ota-150275.zip 46907411 01c19785eef97b06409f52fed568feff
and then the system image for 1.6 just in case. Is this a noob mistake? I'm very unfamilar with system images, would be really great if someone could link me to the file I should try and put there for the image file!
Thanks again guys
Click to expand...
Click to collapse
I may be wrong here (if I am come round and strangle the cat).
But I don't see any .img files?
They are all zips? you need to have the image files UNZIPPED an as .img IRC.
OK, I unzipped the folder and put a folder in the root which had the .img files in them.. still didnt work. because i was trying to put them on to the sdcard through my girlfriends old nokia, it was very slow and kept crashing so the only thing is, i didnt manage to get all 3 unzipped folders on there. would that make a difference?
edit: hope I can still work towards fixing it - i need to check if i have a compatible micro sd card reader when i get back from work! please keep any ideas coming
You need the DREAIMG.nbh on your sdcard. Download the DREAIMG-RC29.zip file, unzip, place DREAIMG.nbh in /sdcard, boot into bootloader, and flash.
i did what cloverdale described on a bricked G1 and it worked just fine , now i need to figure out how to get donut on the mobile
anybody? pm if you can help and TIA
cloverdale said:
You need the DREAIMG.nbh on your sdcard. Download the DREAIMG-RC29.zip file, unzip, place DREAIMG.nbh in /sdcard, boot into bootloader, and flash.
Click to expand...
Click to collapse
Thanks for your reply. I'm downloading this one DREAIMG-RC29.zip
I'll then extract on my computer, isolate the DREAIMG.nbh file and copy it into root of SD card.
Is that correct so far
How do I flash?
Many thanks
Hmm, been doing as much research as I can in the time I have, and it appears I need to type command prompts into the fastboot screen? If someone could tell me exactly what to do, that would be a lifesaver, because I am really missing my G1
I didn't think I was this much of a n00b, but apparently so, heh.
bump.. been doing as much research as possible, but most of my net access atm is from work which has many sides blocked (incl XDA!) and im not entirely sure how to do these things that have been suggested.. if someone could just go into a little bit more detail id be really grateful.
Tranquility__89 said:
Thanks for your reply. I'm downloading this one DREAIMG-RC29.zip
I'll then extract on my computer, isolate the DREAIMG.nbh file and copy it into root of SD card.
Is that correct so far
How do I flash?
Many thanks
Click to expand...
Click to collapse
Once you have extracted DREAIMG.nbh and placed it on the sdcard, all you need to do is power on while holding camera, and the installation should begin (or perhaps it asks you to confirm), and not console is needed. Let it do its work, and when it tells you to reboot, press and hold call+menu+end and you will reboot to RC29.
cloverdale said:
You need the DREAIMG.nbh on your sdcard. Download the DREAIMG-RC29.zip file, unzip, place DREAIMG.nbh in /sdcard, boot into bootloader, and flash.
Click to expand...
Click to collapse
And if that doesn't work I would see if your sdcard is fat32
Thanks guys!!!!!!!!!!! it worked! Much thanks indeed.
There is another problem now though, if anyone can help: I'm doing a manual update to 1.5 (rc8) from 1.0 (rc7) and its getting stuck on the G1 screen and not loading.. not hard bricked or anything, can still access recovery and bootloader.. This thread has more information: http://forum.xda-developers.com/showthread.php?t=625677
thanks again
help please
Hi, my g1 is stuck at the seria10 fastboot screen. It is a US g1 that I purchased rooted. I know enough about these sort of things to get myself into trouble. I removed an app (card game) and my phone then got stuck so I did a battery pull. Now all it will do is either spin on the g1 screen or I can get the three skateboards fastboot screen. I am unsure as to what to do now. I downloaded the rc29 build and put it onto my sd card. I am on a mac so I do not think I use FAT32. I thought putting the rc29 on my sd card and holding the power/send/menu key would tell the device to reboot with the rc29 build. Should I have deleted all the stuff of the sd card? I just want my phone to work - I didn't know the phone was rooted until after I had purchased it from a dude off craigslist. any help is appreciated.
sd card is formatted to fat 16 not 32 according to my diskimage. Help?
brian
bcp0809 said:
Hi, my g1 is stuck at the seria10 fastboot screen. It is a US g1 that I purchased rooted. I know enough about these sort of things to get myself into trouble. I removed an app (card game) and my phone then got stuck so I did a battery pull. Now all it will do is either spin on the g1 screen or I can get the three skateboards fastboot screen. I am unsure as to what to do now. I downloaded the rc29 build and put it onto my sd card. I am on a mac so I do not think I use FAT32. I thought putting the rc29 on my sd card and holding the power/send/menu key would tell the device to reboot with the rc29 build. Should I have deleted all the stuff of the sd card? I just want my phone to work - I didn't know the phone was rooted until after I had purchased it from a dude off craigslist. any help is appreciated.
sd card is formatted to fat 16 not 32 according to my diskimage. Help?
brian
Click to expand...
Click to collapse
Disk utility on a Mac will allow you to format to fat32, you must do this. What happens when you power on the phone while holding down home?
I was able to do the home power thing and wiped the handset then rebooted it. Not sure why it worked this time over any previous times...oh well at least it works. Thank you for your prompt reply.
Hi guys
So after unsuccessfully trying to root my G1, I changed my mind on the mastter and decided to keep it stock OS. I managed to get back to Android 1.0.
I’ve put a formatted and FAT32 SD card in the phone, with RC8 (UK phone) on it named update.zip (file ext hidden in windows).
I boot up the phone holding home key, ALT L then ALT S. It boots successfully saying things like ‘package verified’ etc until it says ‘install complete’. Then it says ‘press home+back to reboot your phone. When I do that it says ‘writing radio image’ then reboots. When it turns back on it has a picture of a sim card and an arrow or a phone and a box then reboots again. And here lies the problem: it never leaves the G1 screen (the first screen displayed when powering on the device. I’m able to power into recovery mode and fastboot mode, and from fastboot mode I can recover the phone by flashing to 1.0 via DREAIMG.NBH, but I really want to be running 1.6.
Can anyone help?
Many thanks
What phone are you using...a UK G1 or a US G1, as your trying to flash a UK rom...(rc8) have you tried flashing RC29? After flashing to android 1.0 it will prompt you to update your phone to 1.6 after that.
Tranquility__89 said:
Hi guys
So after unsuccessfully trying to root my G1, I changed my mind on the mastter and decided to keep it stock OS. I managed to get back to Android 1.0.
I’ve put a formatted and FAT32 SD card in the phone, with RC8 (UK phone) on it named update.zip (file ext hidden in windows).
I boot up the phone holding home key, ALT L then ALT S. It boots successfully saying things like ‘package verified’ etc until it says ‘install complete’. Then it says ‘press home+back to reboot your phone. When I do that it says ‘writing radio image’ then reboots. When it turns back on it has a picture of a sim card and an arrow or a phone and a box then reboots again. And here lies the problem: it never leaves the G1 screen (the first screen displayed when powering on the device. I’m able to power into recovery mode and fastboot mode, and from fastboot mode I can recover the phone by flashing to 1.0 via DREAIMG.NBH, but I really want to be running 1.6.
Can anyone help?
Many thanks
Click to expand...
Click to collapse
That's because you didn't flash your SPL yet.. I'll edit this post with the link to it. Oh and before I do, which rom are you trying to flash?
protomanez said:
What phone are you using...a UK G1 or a US G1, as your trying to flash a UK rom...(rc8) have you tried flashing RC29? After flashing to android 1.0 it will prompt you to update your phone to 1.6 after that.
Click to expand...
Click to collapse
Thanks for the suggestion protomanez - it's a UK G1.
xAbstract said:
That's because you didn't flash your SPL yet.. I'll edit this post with the link to it. Oh and before I do, which rom are you trying to flash?
Click to expand...
Click to collapse
That sounds promising I'm trying to flash UK 1.5 RC8. So I have to install this SPL first and then install the software? I'm correct in jumping straight from 1.0 to 1.5 right?
Tranquility__89 said:
That sounds promising I'm trying to flash UK 1.5 RC8. So I have to install this SPL first and then install the software? I'm correct in jumping straight from 1.0 to 1.5 right?
Click to expand...
Click to collapse
Do I need to flash this SPL? The bottom one on this page http://code.google.com/p/android-roms/downloads/list?q=label:SPL
it's called G1originalBootloadernocheck.zip or something similar
I wouldn't trust that, but I don't know just hold on. Wait a minute, so you flashed the RC8 rom? Are you sure, how long did you wait at the T-mobile G1 screen for? Try flashing RC8 again and let the phone do it's thing. Wait a max of 10 minutes for the phone to load.
Tranquility__89 said:
That sounds promising I'm trying to flash UK 1.5 RC8. So I have to install this SPL first and then install the software? I'm correct in jumping straight from 1.0 to 1.5 right?
Click to expand...
Click to collapse
I'm hoping that you're rooted at 1.0.. And nono, you flash radio first, then SPL THEN the rom.
xAbstract said:
I'm hoping that you're rooted at 1.0.. And nono, you flash radio first, then SPL THEN the rom.
Click to expand...
Click to collapse
He's trying to go back to stock, not flash a rom :U.
Tranquility__89 said:
That sounds promising I'm trying to flash UK 1.5 RC8. So I have to install this SPL first and then install the software? I'm correct in jumping straight from 1.0 to 1.5 right?
Click to expand...
Click to collapse
... sounds like he wants to flash.
-EDIT-
Why would he want to go back to stock if he flashed 1.0? Isn't that the first thing you do when you root?
After you flash DREAIMG.nbh, give the phone a few days and it will update over the air.
xAbstract said:
... sounds like he wants to flash.
-EDIT-
Why would he want to go back to stock if he flashed 1.0? Isn't that the first thing you do when you root?
Click to expand...
Click to collapse
He said he changed his mind because he tried to root but he failed so he's trying to go back to stock OS.
protomanez said:
He said he changed his mind because he tried to root but he failed so he's trying to go back to stock OS.
Click to expand...
Click to collapse
Oh my bad. My lack of attention span prevented me from reading that but to go back to the stock, do what cloverdale said. Reflash your G1 with the RC8 and WAIT for the update. There's no need to do it manually.
Thanks guys! Yes the root looked like it was about to brick my phone so I abandoned it and was feeling overwhelming relieved to even get normal OS back on my phone. So I should just wait for the over the air update (in the UK) and it will automatically bring it up to 1.6 again? Sorry for the late reply, my internet has only just started working, and itll be off again soon!
Why not do it manually btw guys?
Yeah you can just do what cloverdale said, or you can go to the settings(pick it by pressing menu on the phone) and scoll all the way to the bottom to "about phone" I believe there will be an "upgrade" option but I'm not quite sure . You can do it manually by dling the upgrade off the internet somewhere but it's probably better(on the safe side) to just download it from your phone.
Tranquility__89 said:
Thanks guys! Yes the root looked like it was about to brick my phone so I abandoned it and was feeling overwhelming relieved to even get normal OS back on my phone. So I should just wait for the over the air update (in the UK) and it will automatically bring it up to 1.6 again? Sorry for the late reply, my internet has only just started working, and itll be off again soon!
Why not do it manually btw guys?
Click to expand...
Click to collapse
Yes, just give it some time and it will update to 1.6 (or maybe 2.0/2.1). I would suggest waiting of the OTA update and not doing it manually simply because I what I read about your reactions to rooting. I am not trying to be mean when I say this, but the stress it seemed to cause from starting the rooting process may be recreated through a manual flash. Take life easy, relax, and it will update very soon.
OK, no offence taken. I didnt know 2.0 was out for the G1 yet..
I think my rooting went wrong because I didnt flash a radio image or SPL prior to the software - I tried to complete it with limited net access and therefore information, and a non working phone and non working internet is too much of a hinderance as i need these things every day.
I mainly wanted to root it to make the higher end 3d games run smoother via overclocking and use it as a wifi point so i could access the net properly again whilst BT stop ****ing around.
tried to root my g1 today and came stuck, i downgrade android from 1.6 to 1.0, and the next step was to download telnet from the market, but i couldnt get the market to download.
i can see the apps in the market but it just wont download. can anyon help this is the walkthrough i was following http://forum.xda-developers.com/showthread.php?t=442480 , i got to step 6 in the Root your R29 or lower section.
please help
the rom i would like to put on is SuperCSDIv4, so any tips and advice would be good
well mate the rooting that work for me was
RC7-->manually update till i was able to bypass the signin screen then enable wifi (the os which i bypass was 1.5)then download linda file mannager from market/downloaded and install flash.apk and recovery-RA-dream-v1.5.1.img then followed the step as mentioned ...voola and as rooted
i recommand u to use 1-step rooting..it works and soo much easy
http://theunlockr.com/2009/08/22/how-to-root-the-mytouch-3g-or-g1-in-one-click/
and search for recovery-RA-dream-v.1.5.2.img
its the same i m using
try this
thanks jamb, i followed your route and it was much easier. thankyou
thanks jamb, i followed your route and it was much easier. thankyou
Your welcome mate
when i ran though the steps, i got to the end and everything was how it should be.
as id been messin with it foe ages i decided to end there, and i posted all was well abouve.
ive tried to install to roms today both never worked so i must be doinf something wrong.
heres what ive been doing.
empty sdcard, put the rom on it still zipped and renamed to 'update' . insert sd into G1 then boot via home ad power. when ! screen apears press 'alt L' then sellect wipe data followed be install update.zip. then reboot.
once rebooted im still with the original 1.5 .
when i do the wipe and update.zip to me it seems to quick (like 3 seconds for both).
any help peeps
just noticed that that whan i attemp the updat.zip it states update terminated so ive fond my problem ive also noticet that the spl didnt update, even thou it looked last night if all was ok????
going to run through the steps again and see if anything changes. il update later
hi jamb can you gice me a diect link to the spl you used please i thnk that is where im going wrong
here ya go mate
DANGERSPL
sheers jamb, i just keep getting the same msg once i try the update.zip
varifying update package.....
E:No signiture (5 files)
E:Varification failed
Instalation aborted
im at a loss now. any ideas???
What recovery are you using? the alt L thing makes me think you are still using stock.
If you are using RA you don't need to rename it to update.
im using recovery-RA-dream-v1.2.3.img
ihave just tried to use the one u are using but flashrec wouldnt see it, imreally at a loss now.
i just tried to install android stoc 1.0, so that i could start again but that to wouldnt install. so it looks like i may be stuck with 1.5 for now atleast.
edit- it wernt the one u have it was the recovery-RA-dream-v1.6.2.img i tried second
mate u have Uk model?right
just intall flashrec and 1.6.2 recovery image
start flashrec / in the box type something like
/sdcard/recovery-RA-dream-v1.6.2.img
then flash it dont interpt then process and u got root ...
note : put img file in the root(main) of ur sd card
thanks for your help jamb, but i seem to have damaed the boot loader somewhere on my rooting journey ,
i think i know where i done it as after post one, and before post two, i did (i think) get root and managed to flash superCSDIv14, (i got the custom spash with the android bot peeking from behind the A) but after the splash the phone just went black.
when i got your first post i decided to follow that post, i managed to flask android 1.0, then update to 1.5 then from that point i couldnt flash nothing, i even tried to flash back to 1.0 at one point.
last night i went to bed thinking that id be stuck with 1.5, but when i woke, i made the QTA upgrade msg on my phone so i ran it and now am back to where i started 1.6 (which is good cos google nav was released yesrerday)
as the OTA update worked all must not be broken so i decided to start again and tried to flash 1.0, it just faid so. my friend i am giving up, thank you for your time.
stephen.
its been two days now since i gave up on my root of the G1 and am starting to get the craving to start tinker with t againg, i dont want it to beat me.
can anyone outthere shed anylight on my plight. also give me some pointers.
Hi! Just to share what happened to me recently.
My Legend is now sent to service. Don't know exactly what went wrong, but anyways.. I rooted it a couple of weeks ago. Been installing and trying out some ROMs ju find "the one" for me (I'm not new to this, been using rooted Magic and Hero earlier). Finally, I installed a ROM with busybox..so far so good. Then I rebooted my phone - FAIL! It didn't wake up again!
Finally I managed to reinstall a ROM by running "step1" from unlockr's "how to root a legend"-Guide.. But the phone complained about me removing the SD-card. Figured, maybe it was because of unlockr's (Pauls??) testimage, so i ran the official RUU 1.31 and it installed fine (it didn't before). But no, sd-card was still "removed". tried a secont sd-card, same problem. Bought a new 16GB Class 10 card (previous cards were 2GB/8GB class 4) - No go. So - the conclusion is - my sd-card reader is gone. Not to worry, warranty will take care of it - but has this happened to others? If it has, maybe busybox isn't such a great idea on the legend for now.
Hi, nothing wrong with your phone, just an glitch in software that controls usb.
Happen twice for me after flash/root
quite easy to fix with adb and fastboot and terminal software.
se other post and howtos for usb bricked
just make sure that you got same HTC_xxx number to match your device.
http://forum.xda-developers.com/showthread.php?t=733713
/snakehult
snakehult said:
Hi, nothing wrong with your phone, just an glitch in software that controls usb.
Happen twice for me after flash/root
quite easy to fix with adb and fastboot and terminal software.
se other post and howtos for usb bricked
just make sure that you got same HTC_xxx number to match your device.
http://forum.xda-developers.com/showthread.php?t=733713
/snakehult
Click to expand...
Click to collapse
Oh, thanks.. then maybe I should try it before I send it in I actually read the posts before, but I didn't get how to hexedit the file :s I need the how-to for dummies maybe you can help me with that part?
Edit: I can try this later, need to re-root my phone first.. I have my goldcard at home, I'll do it later tonight (I get off work in 6 hours). I'd appreciate if you could help me with the hexedit thou. Now I get "INFOCID is HTC__Y13"
Edit2: since I no longer have root, is it even possible to root the pgone with the sd-controller disabled? :s
Edit3: This is gonna be a loooong post. sorted out the hexedit anyway, I'll se what I can manage :9 Thanks
Problem solved! Thank you for your help! Got back root, now it's just the flashing part left The problem was, I couldn't see my Sd card - at all. but that was easily fixed with the help of this forum! You're great!
I´m glad to help