Since I can't get help in the sea of questions with the official thread, I'll try here.
Google Car Home: unavailable on the market. Does anyone know how I can get this?
Clipboard: the "paste from clipboard" option want do anything. There is only 1 slot on the clipboard (instead of 10). I'm sure this was blur, so is there any way to get this back without restoring a bunch of blur crap?
Screen on while on the phone: if I'm on the phone and holding it with my shoulder the phone will almost be laying horizontal (like when it's sitting on my desk). This causes the screen to come on, ignoring the proximity sensor. Just want the devs to know.
Related
I just got the sprint version of the HTC DIAMOND Sunday, and this is my first WM device. Warranty is still good as well.
My problems:
1)
When trying to take photos or videos, the zoom constantly moves in and out regardless of me not pressing a thing (For example, when i open the camera, the zoom constantly moves from 1.0-2.0x all on its on). I don't know if it suppose to do this or not, but i don't think so. The same thing goes for viewing pics and Opera as well, it zooms back and forth without me touching a thing.
2)
Sometimes it seems as if the "end" button or buttons on the right of the center button,doesn't respond well. I try to hold it down to lock my phone, but it takes several tries in order to this. Maybe its just me
3)
Iv'e read that the center button susppose to act like a scrolling mechanism, but i dont think mine does. Has this feature been disabled or something?
Its a nice phone, but i think mine has a couple of bugs. The zoom problem really annoys me, because i cant take pictures with the camera zooming in and out constantly. Please help..
When using opera Or the camera rotate your finger around the center button(stay on the outside of where it raises)
With the end button try to press it on the far bottom right(as far from the center as possible.
I think the center as a scrolling thing has to be enabled
Calico_NC said:
I just got the sprint version of the HTC DIAMOND Sunday, and this is my first WM device. Warranty is still good as well.
My problems:
1)
When trying to take photos or videos, the zoom constantly moves in and out regardless of me not pressing a thing (For example, when i open the camera, the zoom constantly moves from 1.0-2.0x all on its on). I don't know if it suppose to do this or not, but i don't think so. The same thing goes for viewing pics and Opera as well, it zooms back and forth without me touching a thing.
2)
Sometimes it seems as if the "end" button or buttons on the right of the center button,doesn't respond well. I try to hold it down to lock my phone, but it takes several tries in order to this. Maybe its just me
3)
Iv'e read that the center button susppose to act like a scrolling mechanism, but i dont think mine does. Has this feature been disabled or something?
Its a nice phone, but i think mine has a couple of bugs. The zoom problem really annoys me, because i cant take pictures with the camera zooming in and out constantly. Please help..
Click to expand...
Click to collapse
Make sure when you are in the album or camera, your palm isn't covering the scrolling "ring" around the centre button, as this could be causing the zooming problem. If all else fails, hard reset.
Also, for the buttons to the right, make sure you are almost at or close to the edge of the diamond. if you are close to the center button, it may be acting as a "right click" (as the area to the right of the center "scrolling ring" is a "right" button).
- Hind1
thanks for the info, but when i say it zooms without me touching it, i meant that literally. For example, right now im looking at a pic in my phone. The phone is literally just laying on its back while I'm typing this message. Its constantly zooming in and out of the pic in real rapid movements. Could it be the screen protector that came with the phone? (But then again, it only happens when I load the camera/camcorder,search the web, or view pics) I have it on, but i didn't think that would be the cause. Anyone else encounter this problem? Maybe I should just do a hard reset, or maybe return it. IDK
Sorry to hear...
I have the screen protector on that came with the device, and mine is working fine. Try a hard reset, let me know if it works
- Hind1
My tilt is acting very nasty lately. Over the past few weeks, I noticed that when I turned on the display, occasionally I would get something that looked like the static that you see on TV, but with colors. I would just turn off the screen, and turn it back on to clear it.
Now it's gotten worst! 98% of the time, it intermitantly gives me a blank solid white screen when I turn it on. Occasionally I can just turn to screen off, and on to reset it.
I'm running OEM WM6.1, and I've tried to reinstall the OS, but it didn't help. My phone has taken a beating, and the top corner has had a small crack in it over the past 2 months, but it didn't effect the touch screen, or picture. I also took off the cover to make sure the cables were all snug, and it didn't help.
Any suggestions?
Something got corrupted. If you search WIKI, it's call the 3 color screen stuck .. and you're better off posting at thread below. I hope someone can give you help (if you follow those steps and still no good)
As rule of thumb, do a lot of reading first
http://forum.xda-developers.com/showthread.php?t=423486
On a second thought, it might be the LCD itself broken ..
Oh, believe me.. I'm not one to turn to the forums without doing research myself! All the research I was coming up with seemed to point to a slightly different WSOD though. I think you are right about the screen being broken. I've reinstalled the software, and it acts up even when booting up!
Unfortunately, I'm not impressed with ANYTHING on the market to date! If I'm unable to fix this, I'll just go back to a RAZR until the next gen WM7 phones come out. (With a tilt screen of course!!)
Oh, and even though the screen goes white, it's not stuck, as it fully boots up; I can hear sounds, and even activate the touch screen.
Also, I forgot to mention.. the first problem I started experiencing was that my tilt would go back from landscape mode! It was like the video board was crapping out. I could even see a slight flicker in the display from the refresh rate.
hi i think you may need a new Need a new flex cable ribbon as i had the same problem once
Thanks Tayzaa, I think you could be on to something. I'll open it up and take another look!
Hi!
is this problem solved?
WSOD is bug of Hermes. I would know if kaiser have the same WSOD-bug with D-pad?
XDA-Dev:
I hope this finds you in high spirits and good health. Just a day ago my phone started acting peculiar regarding the lighting of the touchscreen.
Firmware: 1.6 // Build: DRC83 // Rooted: No
Damage: Slightly scratched hard plastic from dropping 2-3 times. Otherwise, outwardly pristine
Upon purchasing the phone, I immediately noticed that the screen would creak if it was pressed on the bottom right hand side (by the send button). The right side of the screen also protrudes slightly higher than the left when in the open position. I have owned the device for about 7-8 months now and have noticed that on the rear, when in open position, there is a scratch where the sliding mechanism moves. The paint is stripped and the underlying metal is displayed in those areas. And now on to the issue at hand:
When the phone is closed (touchscreen only):
- When pressing MENU, or any key that would normally illuminate the screen, this does not happen. The screen stays dim, yet the lights on the buttons bellow it brighten.
- If I slide out the keyboard while the screen is supposed to be on (meaning the buttons are lit up), nothing happens.
When the phone is open (keyboard presented):
- And the screen is off, if I press MENU, the screen comes right up with no brightness issues.
- At this point, if I close the keyboard, the backlight disables itself. The screen is NOT completely blank. If I reflect the light of the room off of it, I can just barely make out that it is indeed displaying whatever task it was that was open, but if I were in a dark room, there would be no chance of recognising what is being presented.
- Continuing from above, once the screen's backlight is disabled and I reopen the keyboard, it does not turn back on. I must turn off the screen and turn it back on for the backlight to resume normal functioning.
One would think that if the issue lies in a loose wire that once the keyboard is extended that the backlight would regain normal functioning. Because this is not happening and that it is only working under certain circumstances, I cannot accurately ascertain whether this is a software or hardware problem.
Attempted remedies:
- Soft reset (both rebooting the phone by powering off and on and by going into the reset menu)
- Hard reset (by going into the reset menu and hitting ALT+W, etc)
Neither of these attempts succeeded in restoring functionality of the backlight. I've also search high and low through the settings, but see nothing other than 'Brightness' under 'Sound & Display.'
It may be noteworthy that I have the paid application 'Power Manager' installed. Though, perhaps not since this issue was still occurring AFTER the factory reset when no foreign applications were installed.
If you require any additional details, feel free to give a reply with any questions. I'm sincerely hoping I don't have to deal with T-Mobile or HTC to have this repaired. Any tips, ideas or possible solutions would be greatly appreciated!
Regards,
Ian
Update on issue:
On the way home from work, as the battery was on it's last leg (less than 10%), I turned off the screen while the device was in the open position after finishing a text. Upon attempting to re-activate the screen, it would not do so. As always, the side buttons lit up, but the screen was blank no matter what I did. I could hear the vibration from receiving texts and the red 'omg I\'m dying LED' was still flashing, so the device had not died.
Returning home, I gave it a reboot by removing and replacing the battery. I've kept it in the open position since it has been plugged in and am quite afraid of manipulating the slide mechanism any further.
I'll be calling t-mobile to get their opinion on any further troubleshooting momentarily and report back.
Sorry for opening an older thread. do you remember what t-mobile said was the problem? i am having the same issue.
simplewhite said:
Sorry for opening an older thread. do you remember what t-mobile said was the problem? i am having the same issue.
Click to expand...
Click to collapse
The ribbon wire in the slide mechanism is either broken or pulled out of socket.
I've been effected by this problem for a while now, it's an issue on stock and cyanogen's rom. So far as I can tell a phantom input is detected at a very specific location on the touch screen provided the primary input is within a specific range along the vertical axis.
I've taken screenshots with the Pointer Location Tool in Dev Tools and wrote a short description of what's going on in each screenshot. This seems to go show up and go away sporadically, seemingly for no reason.
Screenshots here:
http://dl.dropbox.com/u/1620808/touchscreen_bug.zip
If I rotate the screen once and back, the single input part of the bug goes away, if I use two fingers though as shown in one of the screenshots, the bug is still there. Then after letting the screen sleep for a minute or two, it's completely gone.
Anyone else with this problem?
This is a known problem, there are two many threads already stating this
The phone is not yet fully supporting multitouch 100% it only has pinch and zoom, CM has said he found something in the framework that is disabled and should fix this when enabled (but not completly fix all multi touch issues)
I'm not entirely sure how much of this problem is a multitouch issue. I've noticed in particular that when I touch a specific area of the screen, it registers in that place and in a second place that always has a fixed point along the y axis.
This often makes scrolling a pain as I am only able to flick up in the area above the affected location.
This problem can also make typing a pain when I type on the second from bottom row and instead end up hitting the bottom row.
Hey guys,sorry for bringing this up.
Whenever i dial,screen goes black and doesn't come back on.
If i place it flat on a table,then it gets lit but as soon as i rotate the device it goes black again.
My HD7 recently started having this problems...
It started happening after i replaced the micro sd inside with a bigger one.
So my concern is that somehow it moved or got dust when i removed the back plastic cover? Where is it placed anyway?
I tried hard resetting 2 times but nothing works. It would be cool if there was a registry or app to take control of it. Can somebody help?
PS. i cannot send it back because i live in Albania (no official htc shops either around here)
Thanks!
Hello,
The proximity sensor is located on the top left of the device, you can see it when viewed under a bright light. Have you applied any screen protectors which can interfere with them? Replacing the sd card should not have any effect on the proximity sensor. When you rotate the device when the call is placed, the screen should go black by default cause of the sensor
@rhn thank you for your reply.
My phone does not have any screen protector or cover of any kind. Also,if i rotate it while in call it still remains black. As soon as i press the call button,screen goes black and wont come back until the call is ended by the person on the other side.
Really really annoying... Oh sometimes it even flashes after the call has ended...
Sounds like a hardware fault ...have you tried updating your rom?You can find a compatible rom in the rom development subforum..
Yep,tried that too. Just updated today and still the same issue.
It also happened after i changed the micro sd,so maybe something has moved in there. There's no other way than try to open the device and check it out,i guess :/
If you can think of something else,let me know
Warranty
Warranty replacement worked for me.
http://forum.xda-developers.com/showthread.php?t=864311
Thanks bofett, i cannot get a replacement. Warranty for this phone was for 5 days!!! (stupid i know....i totally regret picking it up) So that means i'm screwed...
Thank god i still have my great HD2 so i can start opening this phone without fear