Connecting USB Kills Sd cards - Galaxy S I9000 Q&A, Help & Troubleshooting

Does this happen on anyone elses phone?
TWLaucher is set to default, all widgets removed from homescreens.
Restart phone. and Connect Usb cable. Choose Kies.
It does it's thing and says it's connected when it really isn't. (in the notification bar it says turn off USB storage)
Press Home key to exit kies MTP screen.
NOW
SD cards are Not rescanned for media, if i go to settings/SD Card and phone storage.
my External SD and Internal SD are both saying Unavailable.
The only way i can see them again is if i reconnect the USB as Mass Storage.
Another note: When i select mass storage it loads the 2 sd drives up on my computer instantly. Whereas I used to have to go the the notification bar and mount them manually.
Is this just me?

And Further to this
And Further to this.
If, before i try to connect to kies, i unmount my External SD card. Then when I do the KIES connect option, my MTP application flashes on and off. (briefly back to my homescreen)
After i break that loop by hitting the home key, i can no longer remount my External SD card, and my Internal SD card is unavailable too.
If i try to connect to Mass Storage i don't get any drives show up, even after i mount them manually though the notification bar.
I have to restart my phone.
This is really annoying.

And another thing!
I do my backup with Titanium Pro, my phone is rooted.
It tells me to turn off USB debugging mode.
Which is already off... so, something fishy is going on with my USB i think.
....................
And Lastly,
I finally managed to connect to Kies on my Brother's Computer his is Vista 32bit, Mine is Win 7 x64.
I had to go to Settings, applications, running services and shut down everything manually. Then it connected.
But even then, it lied to me about the availability of a firmware update. It tricked me.
Guess i have to wait till i hear everyone else is getting Froyo before i try again.
Gosh, this is SUCH a trial! I just want a friggin phone that can update it's firmware! Not a damn puzzlebox.

Related

Hero won't mount SDcard on any PC plz Help

Have been trying to connect my Hero to my pc so I can fill up my SDcard with music, but every time I connect it to any pc, the phone just charges. I have the stock 1.5 ROM and still the phone just won't mount SDcard nor would it even pop up the option to mount on the taskbar. I have tried to install ADB drivers and nothing. Phone has been reset to factory defaults and still nothing happens when plugged in to usb, just charges the phone and no messages at all! What Can I do? Thnx in advance.
Have you tried mounting on a different computer? to see if it's either the computer or your phone
Yes I have tried on 6 computers. 4 windows and 2 linux, but same thing happens phone just charges.
CIDRtheBITER said:
Yes I have tried on 6 computers. 4 windows and 2 linux, but same thing happens phone just charges.
Click to expand...
Click to collapse
1. Try different USB cord. Some are made so generic that they only supply power.
2. Check your connectors in the phone. Less likely, but maybe a hunk of pocket lint got in there?
Try downloading USB Switcher from the market, i had the same problem with my phone before and that seemed to fix it.
I have tried with two usb cords, one being the one that came with my ps3 and the other I just happen to come across with
I will try that right now
I just installed USB Switcher and same thing is happening, phone starts charging.
CIDRtheBITER said:
I just installed USB Switcher and same thing is happening, phone starts charging.
Click to expand...
Click to collapse
you have to add the widget to one of your screens then tap the widget icon while it's plugged in. then the icon will turn purple and, hopefully, you will be able to see the drive under my computer.
Widget is on one of my screens, but when I tap it it does nothing just stays gray.
maybe reformat your sd card?
You are absolutely sure the SD card is actually inserted into the slot on the phone?
or maybe even try to insert the sd card to your computer some other way..
If none of those options work, you can try loading up RA (hold HOME while powering on) and mount the SD in recovery > USB-MS Toggle.
Assuming you're rooted and loaded the custom recovery.
No no no.. download htc sync from htc. It should fix your problem.
HERE
All cell phones need drivers on the computer to mount your card. The htc ones come in htc sync.
Some phones, like this one, had the htc sync on the stock memory card... Mine didnt though
And windows can usually find the drivers online by itself. Mine did.
You dont have to sync anything or even set it up.
And of course open up your taskbar drop down list, select charge and change it to "disk drive" mount sd card
installing pdanet also installs the correct drivers
And he gets off when someone with good answer helps. lol
I have installed HTC sync on my computer with no luck. Also I have toggle the ms mode in recovery and still nothing, phone just charges. Im planing on formatting my sd card and starting again but can't find my micro SD adapter lol. Once I find it I will post any updates hopefully that will fix it.
CIDRtheBITER said:
I have installed HTC sync on my computer with no luck. Also I have toggle the ms mode in recovery and still nothing, phone just charges. Im planing on formatting my sd card and starting again but can't find my micro SD adapter lol. Once I find it I will post any updates hopefully that will fix it.
Click to expand...
Click to collapse
Sounds like a corrupted microsd card. You should download the Android dev kit and use ADB and see if theres communication between your phone and the Pc. If not you should look into solving bigger problems than your microsd card.
If there is communication between your phone and computer and you have Adb working, try reformatting that microsd card or replacing it.
I have formatted my sd car with no luck. Still my phone just charges when plugged to the computer. I am pretty sure I have a defective hero, as I have never seen the option to mount the sd on the taskbar. I do have insurance on the phone, but do you guys think the techs at sprint might not want to work on it since it is rooted and has a custom ROM? lol

[Q] My N1 Would not Prompt to Mount SD Memory When I connect it to my PC

I needed to transfer some files from my N1 to my Pc, so I connected it to my PC using the cable. I was expecting the black mounting screen prompting me to mount the SD card, but nothing happened. I restarted my device twice, but the case is still the same. What could have been wrong? I have not installed any app within this time, not removed any. I have used it in just ordinary daily manner, messaging and calling and nothing else. My N1 runs on Froyo, OTA. No jailbreak.
Please help. Thank you
u need to assign a drive letter to your SD card
Noob answer: is it on the status pulldown bar?
Do you have USB Debugging enabled?
Does the phone recognise that it's been plugged in (ie start charging)?
Similar problem
I am having a similar problem with my N1 running CM6 stable. When I turn off USB debugging and plug the phone into my Win7 laptop, I get the USB connected screen, but when I turn on USB storage the SD drive doesn't mount i.e. I cannot see/access the drive in Windows 7. The N1 status bar says USB storage is on.
Under Device Manager, the N1 shows up as Android Phone-->Android ADB Interface with driver version 2.0.10.2 dated 11/08/2009.
Any help would be much appreciated.
Rusty! said:
Does the phone recognise that it's been plugged in (ie start charging)?
Click to expand...
Click to collapse
No, THIS is exactly the problem, the phone dies not recognise that it has been connected to a computer. It does start charging, but no sign of SD memory mount/unmount. Nothing. Just simply charging.
khaytsus said:
Do you have USB Debugging enabled?
Click to expand...
Click to collapse
No, USB debugging is not enabled. I double checked it.
I guess that Windows also doesn't recognize the phone as anything (Device Manager doesn't show anything new plugged in)?
In that case, enable USB Debugging, and see if the phone is recognized by Windows.
If it is - the problem is somewhere in SW.
If it isn't - then it might be a faulty USB cable or connector (from any side - phone or PC).
same thing happens to me from time to time. restart your computer and that should fix your problem.
Sent from my Nexus One using XDA App

[Q] USB Mass Storage Issue

Hello everyone, I have been using this forum for a while now, but havent really posted anything much as I have always found answers to any questions through searching the threads, however, I am unable to find a solution to a problem I have just recently encountered and was hoping someone out there may be able to shed some light on it.
I am using an unbranded handset running JPO which has been performing superbly until today, however, when I connect the phone via USB to my PC and select mass storage the computer does not seem to recognise the phone is plugged in. The strange thing is it worked perfectly before and the only changes I have made since was upgrading the micro SD card to a 16 gig one. I try unmounting the external card and even removing it completely to no avail. I have tried the phone on 3 PCs now, even my Linux PC does not recognise it.
I have rebooted the phone, tried connecting selecting Kies mode instead of mass storage, all to no avail. As soon as I connect the USB to the computer, the phone recognises the connection and asks what I want to do, I select mass storage, then I get the option to mount via the little green android, which turns orange stating it is connected, but the phone just does not show on the pc.
Any ideas would be most welcome, I don’t really want to have to format the internal memory but I think I may have to.
Many thanks in advance.
Additional:
I seem to remember on Eclair that I was able to unmount the internal sd card in the settings menu, however, with froyo, I only have the option to unmount the extrernal sd card. Would someone running JMO be good enough to check and see if they have the otion to unmount the internal sd?
Right, I seemed to have found the problem, so for anyone else who has a similar experience, it was the USB lead. SGS working as it should agian, phew..

[Q] Optimus 2x on mac os X

I recently got the new LG Optimus 2X and im having some real headache over it..
The thing is that it refuses to mount its sdcard on my macbook (10.6.6).
I tryed pretty much everything short of injecting valium, but it simply will not comply.
So could anyone please help me before my hair turns gray and falls off?
It pops up on win xp, both on a pc and in a vmware xp system on the mac, so i assume that its not using the default mass storage system anymore, some google searches hints that its using a semi-proprietary system similar to some mp3- and media-players.
So far ive been using my old phone as SD card adapter, and i also have a wifi network (rarely used, using mobile internet on a usb dongle) for ftp transfers.
But that aint enough, i need to be able to transfer audio/video files aswell as games/apps and backups to/from my phone in a easier fasion than adb push or ftp.
i really like the phone but im concidering returning it and buy a mac compatible phone instead.. but there are no other tegra phones available atm...
Does it use MTP? If so, check out http://www.wentnet.com/projects/xnjb/
I have a Tegra powered tablet (Advent Vega) and my MacBook Pro sees the sd card when mounted no problem.
You could also look at a program called Syncmate. Mac client and free Android version
XNJB is a no-go.. Will not detect a device.
Googlesearch mac with optimus x2 only reveals mac address related links or sites containing the words in different topic lists.
syncmate is a internet-solution, nothing gets synced locally..
And that is simply not an option when i want to transfer +1gb files (at the best of times i reach about 150k/s, usually around 10-30k/s)
Seems to work fine on my MacBook Pro.. no problem at all!
I have some trouble with the phone not detecting the second SD card, solution for me was to uncheck "USB Debugging" while it was plugged in.
Or
Plugout
Disable USB-Debugging
Plug in
Dangerous one: (This might damage current content on your SD-Card, i take no responsability)
While Phone is live
Plug out the SD
Phone goes belly up about it
Says it might be damaged and needs to be reformated
let the phone reformat the SD-Card
Plug the phone back in the Mac
Poof SDcard once again viewable
^^ Above is not recommended, and i can not explain why it worked. also i do not know if it might damage other components of the phone. But mine looks to be just fine and the SD-Card is performing as intended.
Why it is so hard for the Computers to see the external SD is a good Question, i have had the same issues with my windows 7 PC .. USB debugging seemed to be the fix initially.
xarvox said:
I recently got the new LG Optimus 2X and im having some real headache over it..
The thing is that it refuses to mount its sdcard on my macbook (10.6.6).
I tryed pretty much everything short of injecting valium, but it simply will not comply.
So could anyone please help me before my hair turns gray and falls off?
It pops up on win xp, both on a pc and in a vmware xp system on the mac, so i assume that its not using the default mass storage system anymore, some google searches hints that its using a semi-proprietary system similar to some mp3- and media-players.
So far ive been using my old phone as SD card adapter, and i also have a wifi network (rarely used, using mobile internet on a usb dongle) for ftp transfers.
But that aint enough, i need to be able to transfer audio/video files aswell as games/apps and backups to/from my phone in a easier fasion than adb push or ftp.
i really like the phone but im concidering returning it and buy a mac compatible phone instead.. but there are no other tegra phones available atm...
Click to expand...
Click to collapse
On the Optimus 2X you need to activate yourself the USB Mass Storage mode, Go on Applications -> Settings -> SD Card & Phone Storage -> Mass storage only
Desmopro, i already tryed that.
The mass storage setting disables the adb debug tho.
My computer can see the device in system profiler, a hardware list,
And adb devices lists it aswell, but disk utility can't see any connected storage,
mounted or otherwise.
xarvox said:
Desmopro, i already tryed that.
The mass storage setting disables the adb debug tho.
My computer can see the device in system profiler, a hardware list,
And adb devices lists it aswell, but disk utility can't see any connected storage,
mounted or otherwise.
Click to expand...
Click to collapse
What version of OSX you use ?
In terminal, can you see the device (on /dev) ?
Think to reinstall a combo update, to clean up your system
If you use 10.7 beta and you are a developper or a beta tester, send a report to Apple
If you use 10.7 beta found on bittorrent, downgrade to 10.6
The Optimus 2X dont use MTP but the old mass storage method, so there is normally no problem to use OSX with
Im using 10.6.6.
Its strange, my htc hero mounts just fine, without any hazzle or inconvenience, but the optimus will not show..
I finally did find the issue tho, as soon as i eject the external sd-card (remove it physically), the internal storage pops up without a hickup.
But as soon as i insert the sd card, the mounted card stops responding, folders wont refresh, file copy stops and the only option is to eject the media from finder.
So regardless of what i try, i cannot get the external card mounted on my mac, even tho it works fine on pc.
..ive been using my sd card from my hero from the moment i got the phone..

[Q] Help with SD Card

For whatever reason, Windows is not seeing the SD Card on my LG Thrill. Can anyone help?
Have you set the phone to be used as a mass storage device? Slight down the notification bar then tap the usb icon and the rest is straight forward.
It might be because windows is trying to mount it as a drive letter that is already allocated to another drive, check this out by going into device manager. Have you have downloaded the drivers from lg?

Categories

Resources