Hi. I had updated my HTC Tilt2 to its latest ROM ver2.*
I had already populated my 9 tabs on the main page. How do i open the other installed program applications?
is there a short cut key to open the applications?
Need help.
Thank you.
You might want to post this in the Tilt2 forum, this is just the tilt.
Related
someone know a rom version like is in this video for HTC P3600? thanks
http://www.youtube.com/watch?v=UMpZ0DkU-aE&mode=related&search=
Hi Marius -
You are looking at two different pieces of software on that phone.
The first one is the HTC Home screen for the TyTNII, which HAS been copied over to the Trinity. You can tell if that is the home screen used in the ROM because it will usually be shown as HTC Home Kaiser or something similar. You can also install this using a standalone CAB file. Search the board to find the cab, it's in the Trinity WM6 portion of the board.
The second one is a piece of software called Touchflo. The real Touchflo software requires that the touchscreen hardware be the same as the Kaiser or the HTC Touch. Those two phones use different touchscreen hardware (physical chips and the digitizer screen) than the Trinity. So, no one has been successful using the real Touchflo software on the Trinity, and probably never will.
However, there have been some attempts to get the same functions from other software. I've seen something called alphatouchflo, and there are other packages. Note that they do not have all of the same functionality. For example, I haven't seen any of them that could allow use f the scrolling feature to replace sidebar scrolling. I've only seen good scrolling of a third-party contacts list (see PocketCM as an example). This software is also available in a standalone CAB file if you like.
There is a thread devoted explicitly to using Touch Flo on the Trinity in the WM 6 section. If you take a minute or two you can easily find it.
Good luck!
Mike
yes... but i`m looking for rom. the rom have htc home screen instaled in it.
and in this video the scrolling works perfect... i read on the htc p3600 this "tochflo" have some problems. but on other devices these cooked rom with "touchflo" work good. i still looking and waiting for a good rom wm6(not a aplication "touchflo"). now i have wm5.
mariusY said:
yes... but i`m looking for rom. the rom have htc home screen instaled in it.
and in this video the scrolling works perfect... i read on the htc p3600 this "tochflo" have some problems. but on other devices these cooked rom with "touchflo" work good. i still looking and waiting for a good rom wm6(not a aplication "touchflo"). now i have wm5.
Click to expand...
Click to collapse
Hi Marius -
The other devices that use Touchflo have different hardware which is why the Touchflo works for them. The device shown in the video is the HTC Prophet series, which uses the same touch screen as the Kaiser/TyTN II (which is different form the Trinity). You will not find any software or ROMs that can run the Touchflo software on the Trinity. As far as CAB software compared to a ROM, the only difference is in the method of installing. It doesn't matter if you install the software using a CAB file or if it is already included in a ROM, except that you can remove software installed using a CAB if you don't like it.
I suggest you continue watching the thread about Touchflo on the Trinity in the WM6 folder. That thread contains the most current information about using Touchflo on the Trinity.
Mike
Mike
ok.. thanks for informations
Hello, I have some programms on my TyTn II that I cannot use at all and I would like to now if it's posible to totally remove them (registry keys included).
Here is the list of the HTC applications I don't use at all:
Voice Command
Streaming Media
scan visit card
And another question: It is possible to change the looks of the scroll bar in all programms like the one from the Spb Pocket Plus Home Plugin.
It seems like you'd be interested in cooking your own ROM. Start with the Kaiser Upgrading forum with the Kaiser ROM Kitchen sticked at top, or just follow the links in my sig
I'd like to do it without cooking a rom if it's possible^^
A trick I discovered by accident (with QuickGPS) is that if you install another version of an app, the app in question then appears in the Remove Programs list and you can completely remove it.
If you can find CABs for the things you want to remove you may be able to deinstall them after "reinstalling" them from the CAB.
It only appears in the list because of the installation you did. When you remove them, the ROM versions will still be there chewing up space even if you can't run them any more.
The only way to remove something from a ROM is to replace the ROM with a version that doesn't contain the app in question.
Hi there, Can anyone help me out.. i got the HTC TYTN II from ORANGE - UK and they have installed their own HOME PAGE which is CRAP. How do i get the original HTC Homepage Back. Any advise will be appreciated.
Thanks for your help.
ameed
Same problem! Why mess with the HTC Home one and put in an Orange-branded one that's inferior?
Someone out there must know?
Goto Settings -> Personal -> Today -> Items and deactivate the Orange Item, that's it.
Cheers xtin.
What I'm really looking for is the HTC Home application(?) where favourites, weather, etc. are all located. Can't find this on Orange-branded phone.
Hi dude, look in the thread titled all HTC applications, I think it is a sticky on here!
Download the cabs to you pc then put them on the phone and install them
I hope this helps
Spot on, cheers mate.
I'll search the 'stickys' properly myself next time as I progress from virgin noobie...
Sorry to be a bit dim but I cannot find the HTC apps sticky, any chance of a link or the download posted here
many thanks
Close this thread and look up. It is titled:
Sticky: Collection of the Latest Cabs for kaisers [updating 05.02.08]
Good luck.
i know this sounds a stupid question, but which cabs do i need? sorry for being dim!
G
HTC Home Plug v1.6 [eng] from the Sticky: "All the Latest HTC Software - in one post"
Anyone else who was a complete noob at this like me, dont unzip and copy files to phone then look for a .cab file. just copy the zip file and run that on the phone. Took me hours to work that out.
Hello, i have bought my htc diamond yesterday, and i don't have the new interface with touchflo 3d. I have the old classic menu on windows mobile! In the menu, at settings-today-items i can't find touchflo, but i have the application, in settings menu ( as application).. help me, how can i activate touch flo
I can't understand why TouchFlo isn't already selected, but if it is indeed installed on your device, you activate it by...
Start...
Settings...
Personal tab...
Today...
Items tab...
Tick "TouchFlo 3D" and remove all other ticks
This should do the trick. If TouchFlo isn't showing in the "Items" list, then your device doesn't have it installed...
Oh Dear!
My friend called me up the other day with exactly the same issue. He had seen videos on youtube demonstrating the touchflo3d running and he realy liked the look of the way you could flick through contacts and messages.
He rushed down to the local tmobile store and demanded his diamond (compact iv)
He rushed home, unpacked the phone and was greeted with windows 6.1 standard screens throughout.
THE TMOBILE STAFF SOLD HIM THE MDA TOUCH!! (HTC VOGUE) nOT THE DIAMOND! They heard key words and thought of commission
Worse still, he opened the box and could not return the phone!
Honestly i doubt that this has happend to you, just thought it was a relevant funny story. Pretty sure one of the helpfull guys on here will provide you the assistance you need swiftly!
^^^Ouch... I would've flipped out.
don't know if there's a cab for that, you should search this forum and find out.
if not, learn how to flash another rom and problem solved
I have the HTC DIAMOND, not the htc vogue, LOL
I can't find the TouchFlo 3D in the items list. Should i flash my diamond? How can i do this? Thank you very much
Manila TouchFlo 3.8
skrelln said:
I have the HTC DIAMOND, not the htc vogue, LOL
I can't find the TouchFlo 3D in the items list. Should i flash my diamond? How can i do this? Thank you very much
Click to expand...
Click to collapse
At this forum there was a cab file including touchflo 3.x or 3.8. Try to search for it.
It's been a few months since I have been to this forum and it looks like there are lots of cool new programs and a new device (the diamond) that has provided some new cabs. I had gotten a lot of great cabs and tips here from last September through Spring but have not really added much to my phone since then. I had Ultimate Launcher with HTC Home as one of the cube faces and I really loved it. Anyway, I recently ruined my Tilt and had it replaced but the new Tilt has windows mobile 6.1 in place of 6.0 and not all of my old cabs/programs work anymore. I'm excited to see what else is out there for 6.1, but in the meantime, I noticed that the stock tilt comes with a version of HTC Home that has 4 of the 5 tabs (it's missing the music tab). I tried to use HTC home customizer but I can't. I can't seem to load a new version of HTC home over it either. I could not find the HTC Home program in the list of removable programs.
Maybe it's time for me to take the leap and move to a flashed ROM but every time I read through the instructions I get a little nervous and decide to wait until I feel like I really know what I am doing.
Anyway, I'd like to remove this stock version of HTC Home and load up a new version of HTC Home and start adding some cool cabs that work with WM6.1 but I can't find any threads addressing this HTC Home issue. Does anyone have any advice?
I too am interested in this if it is possible.
I dont have a working pc at home right now so flashing is not really an option for me.
What version of HTC home are you trying to install. I think there are a few out there. Also what error or msg are you getting when trying to install the faulty htc home plugin?
I successfully installed the new HTC home over the stock one on my AT&T stock ROM 6.1 and nothing broke. it pretty much overwrites the previous one so you don't have any duplicate entries in the remove programs or anything.
i tried to install HTC Home - Schen 2.1 with N2A weatherpatch (UPX compressed). i just realized my mistake was not deselcting it from the home screen before installing the cab. i feel like a jackass. thanks to the people who offered help. by the way is there a newer, better version of HTC home to install?