I tried to update to the new radio and spl so I could install a rom that required this. I did something wrong and now when I try to revert back to a previous radio it wont let me. When in recovery, I try to flash the radio and it lets me. While rebooting it flashes an error, but the only thing that I can see is something like cannot write no space left. I really dont know what to do and im stuck in recovery.
Im thinking that I have to go into fastboot and do a full wipe, but im not sure.
Dream PVT 32B Ship S-On
Hboot 1.33.0013 (DREA10000)
CPLD-4
Radio-2.22.27.08
Oct 21 2009.22:33:27
Thanks for your help.
Related
Well, I followed the HOW-TO's... and sort downgraded my phone from HTC cupcake build to RC29... then I rooted my phone first and then directly loaded the J.F 1.51 (latest update by JF on the blog)
But here's the problem... (DOH!) forgot the install the new radio first!!!
Now i have JF1.5 with RADIO-1.22.12.29 (I know i need to install the radio with the ending that has 26I)... I already put on the HardSPL and have the PVT board
and here's my question:: I dont 3G as it is (AT ALL)... I got rid of the data plan a while back...
now Should I go ahead and perform the Update with the new radio without worrying? Do i Need to? or would I have to do anything else???
Thanks a lot every one!!
Here's the Radio Information and everything.
Here's what I have when i click the camera button + Power::
DREA100 PVT 32B
HSPL10.95.3000
CPLD-4
RADIO-1.22.12.29
Well, I followed the HOW-TO's... and sort downgraded my phone from HTC cupcake build to RC29... then I rooted my phone first and then directly loaded the J.F 1.51 (latest update by JF on the blog)
But here's the problem... (DOH!) forgot the install the new radio first!!!
Now i have JF1.5 with RADIO-1.22.12.29 (I know i need to install the radio with the ending that has 26I)... I already put on the HardSPL and have the PVT board
and here's my question:: I dont 3G as it is (AT ALL)... I got rid of the data plan a while back...
now Should I go ahead and perform the Update with the new radio without worrying? Do i Need to? or would I have to do anything else???
Thanks a lot every one!!
Here's the Radio Information and everything.
Here's what I have when i click the camera button + Power::
DREA100 PVT 32B
HSPL10.95.3000
CPLD-4
RADIO-1.22.12.29
pokerace said:
Well, I followed the HOW-TO's... and sort downgraded my phone from HTC cupcake build to RC29... then I rooted my phone first and then directly loaded the J.F 1.51 (latest update by JF on the blog)
But here's the problem... (DOH!) forgot the install the new radio first!!!
Now i have JF1.5 with RADIO-1.22.12.29 (I know i need to install the radio with the ending that has 26I)... I already put on the HardSPL and have the PVT board
and here's my question:: I dont 3G as it is (AT ALL)... I got rid of the data plan a while back...
now Should I go ahead and perform the Update with the new radio without worrying? Do i Need to? or would I have to do anything else???
Thanks a lot every one!!
Here's the Radio Information and everything.
Here's what I have when i click the camera button + Power::
DREA100 PVT 32B
HSPL10.95.3000
CPLD-4
RADIO-1.22.12.29
Click to expand...
Click to collapse
I would downgrade to RC29, re-root, re-update to JF1.51, update the radio, then finally update the spl. Whew, think I got the steps correct!
screwthe49ers said:
I would downgrade to RC29, re-root, re-update to JF1.51, update the radio, then finally update the spl. Whew, think I got the steps correct!
Click to expand...
Click to collapse
waaaiit lol wouldn't that be just like what i have it at right now? im at the JF1.51 update right now (but haven't updated the radio)... and I read somewhere that you should update the radio BEFORE you put in the jesus freke build. and you gnna have to help me out on the spl part... sorta new to this but learning quick
thankss for your reply though
did you get any response to this?
I have the same setup as you, but I want to upgrade over to HERO. I just want to know how to upgrade the Radio and where/how to upgrade the SPL (btw - wtf is the SPL) that HERO uses
thanks
I would like to thanks everyone in advance for help with my questions. (I have searched the forums for this information but have not found the answers to my exact questions.)
How can you verify whicg SPL you are running? What exactly is the SPL and its function? I thought that if you held the camera button and power it would show you all the information about spl and radio but maybe its not the case. I tried to update to danger(haykuro/hero) spl and it doesn't say danger any where. below is the output of my camera+power boot screen.
___________________________
DREAM PVT 32B ENG S-OFF
HBOOT- 1.33.2005 (DREA10000)
CPLD-4
RADIO-2.22.19.261
APR 20 2009, 15:30:43
HBOOT
<BACK> Fastboot Mode
_________________________
Currently I am running Cyanogen 1.4 recovery and CM 4.0.2 stable build.
I would also like to give props to cyanogen and all the other programmers for making all this possible.
Quest60 said:
I would like to thanks everyone in advance for help with my questions. (I have searched the forums for this information but have not found the answers to my exact questions.)
How can you verify whicg SPL you are running? What exactly is the SPL and its function? I thought that if you held the camera button and power it would show you all the information about spl and radio but maybe its not the case. I tried to update to danger(haykuro/hero) spl and it doesn't say danger any where. below is the output of my camera+power boot screen.
___________________________
DREAM PVT 32B ENG S-OFF
HBOOT- 1.33.2005 (DREA10000)
CPLD-4
RADIO-2.22.19.261
APR 20 2009, 15:30:43
HBOOT
<BACK> Fastboot Mode
_________________________
Currently I am running Cyanogen 1.4 recovery and CM 4.0.2 stable build.
I would also like to give props to cyanogen and all the other programmers for making all this possible.
Click to expand...
Click to collapse
You must not have searched to well cause this topic has been talked about soooooo many times. And yes you do have the newest spl installed. It won't say danger.
Thanks for your expertise.
No problem
Hello all,
i tried to reflash my g1 since it was looping at the nexus boot logo, and i didn't like the rom anymore, but anyway i downloaded this rom (Hero SenseLX v2.5.3a stripped version) and the required Hboot and Radio, but it doest want to boot. it stays at the tmobile logo.I saw somewhere on the forum that i have to leave the phone for about 5-10mins. but after that it just stays like that, i left it for 4hours with no luck..
i don't know where i made a mistake so can someone help me with this?
my device Info :
HTC Dream/T-mo G1
DREAM PVT 32B SHIP S-ON
HBOOT-1.33.0013d (DREA11000) <<Flashed Successfully
CPLD-4
RADIO-2.22.28.25 <<Flashed Successfully
Oct 21 2009, 22:33:37
go to rom thread and get the LX-Recovery.zip.. flash with new instruction guide
if that dont work than re partition your sd card 128mb~swap 1024mb~ext4 try again...
and if that dont work.. flash the fr-remove file, do superwipe..reboot to recovery and try 1 more time it should work i promise!!!
And if that doesn't work, or you don't want to mess with custom mtd. Use the no custom mtd version of senselx. (Latest is uploading now)
hi... just wanna ask.. is it normal to stuck at T-Mobile G1 logo for few a minutes after installing froyo by lazlo? i install the Froyo because im curious about it's speed. they say it's one the best rom out there, in term of speed. that's why i try to install it and i did it. but when my phone reboot after the installation, it just stuck at T-Mobile G1 screen. i've waited for about 5 to 6 mins. but it is still there. is it normal? or i've done something wrong or forgot something ?
What is your current SPL/HBOOT and radio?
Dream PVT 32B Eng S-off
HBOOT-1.33.2005 (DREA10000)
CPLD-4
Radio-2.22.23.02
do i have a wrong radio and spl ? XD
junio07 said:
Dream PVT 32B Eng S-off
HBOOT-1.33.2005 (DREA10000)
CPLD-4
Radio-2.22.23.02
do i have a wrong radio and spl ? XD
Click to expand...
Click to collapse
SPL: 1.33.0013d (hboot)
RADIO: 2.22.27.08 / 28.25
you should have these
and ext partition then it should run fine
I learn something。Thanks
dani132 said:
SPL: 1.33.0013d (hboot)
RADIO: 2.22.27.08 / 28.25
you should have these
and ext partition then it should run fine
Click to expand...
Click to collapse
Thanks !!!
first initial boot time is a little long, but subsequent reboots will be faster. froyo by lazlo is fast,
FroyoByLazlo is awesome ROM but does not contain CZECH Language,can someone help me?????Some tips how to add .... i have tried MoreLocale2,but it sucks... ..please...help....