Database Develop

How to get your 2X into fastboot mode

A quirk of the Advent Vega (also Tegra) that allows you to enter fastboot mode also applies on the 2X (Thanks Bumble-Bee for the tip!)
Basically, if you wipe the boot partition (e.g. 'dd if=/dev/zero of=/dev/block/mmcblk0p5') then reboot, the device drops to fastboot.
Handy testing feature for devs.
P

That sounds great!
Does fastboot boot work? Does fastboot flash work? Any other lockdowns there?

maxisma said:
That sounds great!
Does fastboot boot work? Does fastboot flash work? Any other lockdowns there?
Click to expand...
Click to collapse
Fastboot boot did, didn't try anything else yet!
P

Fastboot flash works, ish.
I could flash recovery, but not boot. What would be nice is a radio in .img format so I don't have to backup and restore the bastard thing when a new one is out.

Ahh this would be so awsome.. since i Smartflash can't detect my P990
(so i can't flash the latest basebands or revert them)
Gief Radio in .img format !

Would anyone Know how to get the radio as .img ?

Would this work on the T-Mobile LG G2X?

Good question.
I expect the boot partition is different, so don't blindly follow the command here.

Rusty! said:
Good question.
I expect the boot partition is different, so don't blindly follow the command here.
Click to expand...
Click to collapse
I did follow the command blindly with my P990, but no boot for me. Luckily there's an escape with the NVflash stock ROM.

It's fine on the P990, it's meant to 'not' boot, it's not broken at that stage, it's in fastboot. You can fastboot boot your way out of it.

Is this a safe option to try on my v10D? Fastboot decreases boot time by how much really?

That's not what fastboot means, to be honest, this isn't going to be for you

Hey All,
I was trying to install GingerStreak 2.4.4 from GingerStreak 2.4.3.
http://forum.xda-developers.com/show....php?t=1333010
According to the instructions, I flashed
amss.mbn - http://mirror2.streakdroid.com/amss.mbn
and
dsp1.mbn - http://mirror2.streakdroid.com/dsp1.mbn
(got both the files from the first link above)
Then when I tried to reboot into Bootloader (Power+Vol Up+Vol Down) but nothing happens apart from the Dell logo being displayed.
I try to boot normally, still stuck at the Dell logo. The phone never even reaches the boot animation.
I try to go boot into fastboot (power+camera key)mode, but the phone never even boots. The screen stays off, so do the LED lights.
I figured out that the files downloaded above were incomplete(due to slow speed Chrome showed incomplete files as download complete).
amss downloaded: 111KB. Actual Size: 15.41MB
DSP1 Downloaded: 250KB. Actual Size: 8.94MB
So, I flashed the wrong files.
Now, I guess, the phone is bricked big time.
I need big time to get into fastboot mode (to flash the correct files) or anyhow get my phone working.
Guys, need help. Please help me out and get this issue sorted out.

You should maybe consider the Streak forum...

Sorry, my bad. I just searched for my problem an found this thread. Poured out all my worried without bothering to check on the device name.
Thanks anyhow!

fastboot: bootloader locked or unlocked?

Hey guys
I noticed that many people are having problems to flash using fastboot. They report that fastboot says the bootloader would be locked, even if it's definitely unlocked.
so my question, who of you is able to flash (kernels for example) using
Code:
adb reboot bootloader
fastboot flash boot boot.img
and who can flash using
Code:
adb reboot oem-unlock
fastboot flash boot boot.img
I've been talking to LG about this problem, but all they said was to change a driver config for ADB. But due to the fact that I'm using Linux, it is impossible that it is a driver problem. I also tried their "solution", but guess what... it didn't work.

first one don't work by me

please use the poll, so that we've got all informations bundled

Hi
I've already voted.
So for me it does not work.Always comes back PERMISSION DENIED.
232.10 3At Austria.
I have rooted and bootloader unlocked.CWM recovery installed.CM 10.1 RC2 installed.
I can flash everything,rom,kernel...
Everything works just Reboot bootloader is not working.
Has an idea? Thanks

I can't really test adb due to idiot computer asking for disk to be inserted. But when I reboot to bootloader it says "now ready" which didn't happen when it was locked. Used the hacked method too, my odm_reserved reads:
0x000000000000000000000000000000000000fdffffffcafffffffdfffefeffed
As @laufersteppenwolf probably knows I am UK 234-000 user, unlocked with the original terminal hacked that blew all our fuses :thumbup:
Sent from my rooted P880

@non4 said:
I can't really test adb due to idiot computer asking for disk to be inserted. But when I reboot to bootloader it says "now ready" which didn't happen when it was locked. Used the hacked method too, my odm_reserved reads:
0x000000000000000000000000000000000000fdffffffcafffffffdfffefeffed
As @laufersteppenwolf probably knows I am UK 234-000 user, unlocked with the original terminal hacked that blew all our fuses :thumbup:
Sent from my rooted P880
Click to expand...
Click to collapse
it's not about the bootloader being locked, it's about the ability to use fastboot for flashing something (kernel for example)

laufersteppenwolf said:
it's not about the bootloader being locked, it's about the ability to use fastboot for flashing something (kernel for example)
Click to expand...
Click to collapse
I know, but does yours say "now ready"? If so then LG really did screw up, idiots
Also if I type "reboot oem-unlock" in terminal I get "welcome to fastboot mode "
Sent from my rooted P880

@non4 said:
I know, but does yours say "now ready"? If so then LG really did screw up, idiots
Also if I type "reboot oem-unlock" I get "welcome to fastboot mode "
Sent from my rooted P880
Click to expand...
Click to collapse
yeah, it says now ready, but fastboot says my bootloader is locked -.-
EDIT: @@non4 already knows LG's answer to this problem, but i think i can tell it y'all:
We are very sorry to say that there is no way to solve the problem you mentioned.
Click to expand...
Click to collapse
nice work LG -.-

laufersteppenwolf said:
yeah, it says now ready, but fastboot says my bootloader is locked -.-
Click to expand...
Click to collapse
You tried typing OEM unlock command? A few people have to do this to get to correct working fastboot mode. In fact I think the guy that got my BL unlocked with his echo odm method had this issue
Sent from my rooted P880

no, i can't ATM...

laufersteppenwolf said:
no, i can't ATM...
Click to expand...
Click to collapse
Reboot oem-unlock works in terminal emulator, that's the only way I can get into "welcome to fastboot" screen. When you can try it, if you can flash stuff through here then we have a solution for you unlucky fellows
Sent from my rooted P880

I'm sorry, but "reboot oem-unlock" does not work.
I just get black screen. :crying:

varadinum said:
I'm sorry, but "reboot oem-unlock" does not work.
I just get black screen. :crying:
Click to expand...
Click to collapse
Weird...
Sent from my rooted P880

Security error for reboot oem-unlock, but manual flash is possible. Normal fastboot says BL is locked, as usual.
Sent from my LG-P880 using Tapatalk 2

maybe you guys can contact LG, too. So they eventually can realize that they've f**ked up, regarding the bootloader...

varadinum said:
Hi
I've already voted.
So for me it does not work.Always comes back PERMISSION DENIED.
232.10 3At Austria.
I have rooted and bootloader unlocked.CWM recovery installed.CM 10.1 RC2 installed.
I can flash everything,rom,kernel...
Everything works just Reboot bootloader is not working.
Has an idea? Thanks
Click to expand...
Click to collapse
maybe my post here helps:
http://forum.xda-developers.com/showthread.php?t=2224020&page=46

adb reboot oem-unlock i got the fastboot welcome screen. i was hoping to see the unlock screen once more because i think something went wrong..

guys, I'm stuck at the CM10.1 boot animation, and after reading numerous posts I found some saying that I need to flash the boot.img through the fastboot. I've managed to go to the Welcome to LG Fastboot Mode though TWRP2.5.0.0 reboot -> bootloader. But when i try fastboot devices my device isn't listed... Any advice on what should I do? Is there any other way to solve the boot issue? I've waited like 15 mins with the phone not getting further than the CM10.1 Logo... :'(
PS: I'm using Minimalistic ADB and Fastboot from here
http://forum.xda-developers.com/showthread.php?p=42407269

both reboot commands "oem-unlock" and "bootloader" are defined in the kernel source code. "oem-unlock" sets an intern hardware flag for booting the unlocked mode and "bootloader" just sets the normal bootloader flag.
wondering why the reboot parameter "recovery" actually only does a normal reboot? (CM has an additional script they call before rebooting to recovery for setting the recovery boot flag)
right, no "recovery" command defined in the kernel source, but its only a few lines of code to add this
------
reboot
bootloader: locked fastboot
oem-unlock: unlocked fastboot
some time ago i messed around with these hardware flags and now oem-unlock doesnt work. it boots instead into recovery lol. no clue why
Gesendet von meinem LG-P880 mit Tapatalk 4 Beta

problem ( Please help quick )
Hi Every One
i have a question
i install new firmware to update hboot
first step to install was relocked bootloader and i did it
after installation i want to unlock my bootloader but my android does not up and freaze on htc one boot animation
how can i unlock my bootloader via fastboot ?? please help me quick

HELP PLEASE! Stuck in bootloader, NEXUS 6

Hi, I wanted to flash the 5.1 update to my new Nexus 6.
I went all over the basic steps.
After I unlocked the bootloader I tried to flash the image with the flash-all command.
It failed, so I remembered maybe I forgot to click on USB debugging? (This confuses me because I think I shouldn't be able to unlock bootloader without this).
When I wanted to start android I locked it first, so I would unlock it afterwards and erase everything to start as new.
Whan I locked it, I could not unlock it again. I can't access Android, neither do anything else like factory reset nor Recovery Mode. I return to the bootloader as soon as I press anything.
There are red words at the top: AP Fastboot Flash Mode (Secure). Does this means anything?
Is there any way to force unlocking the bootloader? When I try it, the phone tells me to go to Developer Options but I can't access Android.
Please HELP! Is there any way to flash a rom or android again in locked state? Recovery?
Thanks for reading this and thinking about a solution! I really hope I won't be stuck forever in bootloader.

Uh oh... Were you trying to downgrade back to LRX22C from LMY47D so that you could upgrade to LMY47M, by any chance?
If so you might be fooked.

Actually no. I was trying to upgrade from 5.01 to 5.1. I'm really scared of having my Nexus 6 bricked. I can't do anything to unlock the bootloader. Maybe I could sideload a recovery? But do I need to be unlocked?
Sent from my Nexus 7 using XDA Free mobile app

Try here this might help you. I hope.
http://forum.xda-developers.com/showthread.php?t=3059518

I hope you get it sorted out. I have read SO many bad things regarding this topic and people being screwed that they cant get back in to re-unlock after relocking

toknitup420 said:
Try here this might help you. I hope.
http://forum.xda-developers.com/showthread.php?t=3059518
Click to expand...
Click to collapse
I already tried this solution, I think mine is a little different. At the end of the post it says to enter fastboot and restore with a factory image. I can't because I am not unlocked. In order to unlock my device I have to go to Developer Settings (it is the message when I use the OEM unlock command). but I can't access to Android. I am stuck in the bootloader but can run fastboot commands.

sotnasnauj said:
I already tried this solution, I think mine is a little different. At the end of the post it says to enter fastboot and restore with a factory image. I can't because I am not unlocked. In order to unlock my device I have to go to Developer Settings (it is the message when I use the OEM unlock command). but I can't access to Android. I am stuck in the bootloader but can run fastboot commands.
Click to expand...
Click to collapse
The solution that was posted should work, but you need to use RSD Lite in order to flash the factory image, not fastboot.
Read it over nice and slow again, because you are in panic mode right now, so take your time and you will get it back up and running with no problems.

idtheftvictim said:
The solution that was posted should work, but you need to use RSD Lite in order to flash the factory image, not fastboot.
Read it over nice and slow again, because you are in panic mode right now, so take your time and you will get it back up and running with no problems.
Click to expand...
Click to collapse
I think you are 100% right. I am in panic mode, thanks. I'll do it again following every step. I'll let you know.

sotnasnauj said:
I already tried this solution, I think mine is a little different. At the end of the post it says to enter fastboot and restore with a factory image. I can't because I am not unlocked. In order to unlock my device I have to go to Developer Settings (it is the message when I use the OEM unlock command). but I can't access to Android. I am stuck in the bootloader but can run fastboot commands.
Click to expand...
Click to collapse
You should be OK. People in that thread have reported success flashing the new factory image while locked. Check the last few pages of the thread.

toknitup420 said:
You should be OK. People in that thread have reported success flashing the new factory image while locked. Check the last few pages of the thread.
Click to expand...
Click to collapse
Thanks! I've been reading a lot from this thread but I get something unusual as the other people are experiencing. When I try to flash partition gpt.bin I get (bootloader) Unlock before flashin.
It is kind of contradictory as this fix supposedly fixes flashing without unlocking. I don't know if it is a problem of drivers. My PC sees my N6 as Google Nexus Bootlader Interface. In the thread, the PC sees the device as "Bulk" or "Qualcomm ....... etc etc".
My panic mode isn't turning off. I may be missing something.

sotnasnauj said:
Thanks! I've been reading a lot from this thread but I get something unusual as the other people are experiencing. When I try to flash partition gpt.bin I get (bootloader) Unlock before flashin.
It is kind of contradictory as this fix supposedly fixes flashing without unlocking. I don't know if it is a problem of drivers. My PC sees my N6 as Google Nexus Bootlader Interface. In the thread, the PC sees the device as "Bulk" or "Qualcomm ....... etc etc".
My panic mode isn't turning off. I may be missing something.
Click to expand...
Click to collapse
Did utry fastboot devices to see your device is connected...then fastboot oem unlock?
Also, I'm the one who has found a fix for the bricked issues when it comes to locking and unlocking the boot loader...in boot loader...when u go to recovery....what happens?

Yes, my device is connected. I've tried everything. I've been reading the last thread and posted what is happening to me, this is the URL of my posts.
http://forum.xda-developers.com/showthread.php?p=59659030
I can't go to recovery, I return to the BL.

idtheftvictim said:
The solution that was posted should work, but you need to use RSD Lite in order to flash the factory image, not fastboot.
Read it over nice and slow again, because you are in panic mode right now, so take your time and you will get it back up and running with no problems.
Click to expand...
Click to collapse
Now I've tried everything in that thread, when I was reading I thought flashing gpt.bin would be the solution but I can't do it, I can't flash it.. It says "Unlock before flashing". Supposedly flashing gpt.bin would allow me to flash without unlocking.
My last resource is trying this on a mac, I've read you don't need drivers so maybe it is a driver thing. I HOPE SO..
Can't access adb with my pc.

You don't need adb.

sotnasnauj said:
Yes, my device is connected. I've tried everything. I've been reading the last thread and posted what is happening to me, this is the URL of my posts.
http://forum.xda-developers.com/showthread.php?p=59659030
I can't go to recovery, I return to the BL.
Click to expand...
Click to collapse
Download factory images...extract them....pull the stick recovery and use the command fastboot flash recovery recovery.IMG
Also...did ubuse fastboot OEM unlock?

jamescable said:
Download factory images...extract them....pull the stick recovery and use the command fastboot flash recovery recovery.IMG
Also...did ubuse fastboot OEM unlock?
Click to expand...
Click to collapse
Yes, I used it but it tells me I need to go to Developer Settings and Allow OEM Unlock which I cant because cant access Android.
I can't flash anything as I am OEM Locked

sotnasnauj said:
Yes, I used it but it tells me I need to go to Developer Settings and Allow OEM Unlock which I cant because cant access Android.
I can't flash anything as I am OEM Locked
Click to expand...
Click to collapse
I think you should lock this thread. Following advice from different people in different threads is a really BAD idea.

rootSU said:
I think you should lock this thread. Following advice from different people in different threads is a really BAD idea.
Click to expand...
Click to collapse
I agree because op is somehow confused.....fastboot has nothing to do with develope settings USB enabled

Yes it does. He flashed the factory images, then relocked (which defaults to disabled oem unlocking). But something failed (guessing possibly userdata failed). I would recommend fastboot formats userdata to perform a factory reset from the boot loader to see if you can get android to boot.
Sent from my Nexus 6

hlxanthus said:
Yes it does. He flashed the factory images, then relocked (which defaults to disabled oem unlocking). But something failed (guessing possibly userdata failed). I would recommend fastboot formats userdata to perform a factory reset from the boot loader to see if you can get android to boot.
Sent from my Nexus 6
Click to expand...
Click to collapse
Yes.
Running
Code:
fastboot format cache
fastboot format userdata
Make sure it's FORMAT not erase.
Then walk away, watch some T.V. and don't check it for a while. (Panic mode will make it seem forever, trust me! I did the same thing as you!)

Is it possible to access files / pics via fastboot only?

Hello All,
I have following issue and hope that - if possible - someone can help me. I also would like to mention that I am not an
Android expert but did read a lot of articles here in the forum to find out - or better - to get an idea how things are working.
My Z3C had a water damage. Now I only get fastboot mode. Display is broken and does not show anything. I installed Android-SDK
to get ADB and Fastboot. I installed also drivers.
When I connect the device while pushing the "volume down" button the device manager show me a somc flash device with the "volume up" button I see an Android ADB Interface device. However ADB is not working (no device found) only Fastboot does.
I flashed the "Z3c_DooMLoRD_AdvStkKernel_v01_FW-105.img" with Flashtool via fastboot in the hope that I can somehow access
to "sdcard" by blindly navigating to "mount storage" but nothing seem to work.
On my linux device I see that the usb device is recognized but that it is not an mtp device.
Before I continue to spent hours without really knowing what I am doing I thought that if there is a solution I would find it here.
So if there is any way to get access to my files / pics on the device I would be really glad if someone can let me know how or
at least bring me to the right direction.
Thanks a lot in advance!

Is your bootloader unlocked?

clouds5 said:
Is your bootloader unlocked?
Click to expand...
Click to collapse
Thanks for your reply clouds5.
I followed the process to unlock the bootloader (got code from sony side and unlocked via fastboot with
"fastboot.exe -i 0x0fce oem unlock 0xKEY").
In Flashtool, when I click on the "BLU" Icon I get a window with with my IMEI and my Unlock Code and a
Relock Button. So I assume that the bootloader is unlocked.
If there is another way to verify please let me know and I will do.

no you cannot access files via fastboot only. but isn't it possible to flash custom recovery img file and boot into recovery and access files?

evildog1 said:
no you cannot access files via fastboot only. but isn't it possible to flash custom recovery img file and boot into recovery and access files?
Click to expand...
Click to collapse
I flashed "Z3c_DooMLoRD_AdvStkKernel_v01_FW-105.img" from doomlord.xperia-files.com/download.php?dlid=WjNjX0Rvb01Mb1JEX0FkdlN0a0tlcm5lbF92MDFfRlctMTA1 with
fastboot flash boot Z3c_DooMLoRD_AdvStkKernel_v01_FW-105.img
in the hope that it is possible but after rebooting it immediately goes into fastboot again. As I do not have
a screen I can not see anything - so I can not really confirm if it works or not - and in windows I do not see
anything either..

Galbasib said:
I flashed "Z3c_DooMLoRD_AdvStkKernel_v01_FW-105.img" from doomlord.xperia-files.com/download.php?dlid=WjNjX0Rvb01Mb1JEX0FkdlN0a0tlcm5lbF92MDFfRlctMTA1 with
fastboot flash boot Z3c_DooMLoRD_AdvStkKernel_v01_FW-105.img
in the hope that it is possible but after rebooting it immediately goes into fastboot again. As I do not have
a screen I can not see anything - so I can not really confirm if it works or not - and in windows I do not see
anything either..
Click to expand...
Click to collapse
hmm you better send it to repair.

evildog1 said:
hmm you better send it to repair.
Click to expand...
Click to collapse
That's unfortunately not an option as I had to disassemble the device

evildog1 said:
no you cannot access files via fastboot only. but isn't it possible to flash custom recovery img file and boot into recovery and access files?
Click to expand...
Click to collapse
Should sdcard appear automatically when booting into recovery or are there any specific steps I would need to complete?

Question Redmi Note 11 Stuck/boot loop in Recovery mode

I need help, I did some research but I couldn't find a solution to my problem.
I know that others have a problem with rebooting to recovery when unlocking, but my problem is different. My phone is just stuck in a loop into recovery mode and won't boot normally even in safemode.
I haven't tried wiping the data yet because I want to save my files. Do you have a solution for this?
I turned on USB debugging before this bootloop happened.

mhegz said:
I need help, I did some research but I couldn't find a solution to my problem.
I know that others have a problem with rebooting to recovery when unlocking, but my problem is different. My phone is just stuck in a loop into recovery mode and won't boot normally even in safemode.
I haven't tried wiping the data yet because I want to save my files. Do you have a solution for this?
I turned on USB debugging before this bootloop happened.
Click to expand...
Click to collapse
How exactly did you set up your custom recovery, and when exactly did it stop working? (has the recovery ever worked normally for you?)

Sheist! said:
How exactly did you set up your custom recovery, and when exactly did it stop working? (has the recovery ever worked normally for you?)
Click to expand...
Click to collapse
I didn't do anything, I just charged my phone while it was turned off. Then I turned on the phone and the same thing happened as with others where when I unlocked it from the lock screen, the phone restarted and that's what happened.
Edit:
I saw this in another thread, we have the same problem.
KMS45 said:
Hello to everyone,
So basically i read all the 10 pages of this thread and I have not found someone that have the same problem as me. I have the “bootloop” but the thing is that my phone is not even turning on. It is just booting and going back to the recovery menu. So I choose the reboot option but still coming back to the menu. I have already turned on the debug usb option because I used to be using it before my phone dies. I have a Xiaomi MI10 Lite 5G. I also tried the MiAssisstant but no succes because device not detected.
If someone have a solution without wiping all my precious data pls ?
Click to expand...
Click to collapse
KMS45 said:
Here is a video to understand what is happening when:
Reboot:
https://imgur.com/a/rB9QhSZ
Safe Mode:
https://imgur.com/a/X0KH5AD
Click to expand...
Click to collapse

mhegz said:
I didn't do anything, I just charged my phone while it was turned off. Then I turned on the phone and the same thing happened as with others where when I unlocked it from the lock screen, the phone restarted and that's what happened.
Click to expand...
Click to collapse
If you have your phone to automatically install updates, it might have done exactly that, and it borked. i.e. incomplete installation. There is no recovery partition on the spes so the boot image is potentially whacked. Try reflashing boot and dtmo and vbmeta images in Fastboot from your current ROM. That should get you back to where you were.

Sheist! said:
If you have your phone to automatically install updates, it might have done exactly that, and it borked. i.e. incomplete installation. There is no recovery partition on the spes so the boot image is potentially whacked. Try reflashing boot and dtmo and vbmeta images in Fastboot from your current ROM. That should get you back to where you were.
Click to expand...
Click to collapse
Sorry, I'm not really knowledgeable about this. Can you guide me or give me a link on how to do it? I don't have any experience in flashing through fastboot but earlier, I tried using ADB to check if my device is being recognized and I think it was recognized.
And also, I don't know which firmware to download or what is the current version of my phone because I only know the basic details of my device like this is Redmi Note 11 6/128 4G, I think this is the global version, and by the way, I'm from the Philippines.

mhegz said:
Sorry, I'm not really knowledgeable about this. Can you guide me or give me a link on how to do it? I don't have any experience in flashing through fastboot but earlier, I tried using ADB to check if my device is being recognized and I think it was recognized.
And also, I don't know which firmware to download or what is the current version of my phone because I only know the basic details of my device like this is Redmi Note 11 6/128 4G, I think this is the global version, and by the way, I'm from the Philippines.
Click to expand...
Click to collapse
Enter fastboot, check your phone is unlocked.
fastboot getvar unlocked (response will be unlocked: yes)
If you are global, then get the fastboot version from here: https://xiaomifirmwareupdater.com/miui/spes/stable/V13.0.12.0.SGCMIXM/
This one is mine. Be careful you get the non-4g-in-the-name ROM for your 4g phone if yours is like mine:
Xiaomi Redmi Note 11 - Full phone specifications
www.gsmarena.com
Beware of the other one that has a Mediatek processor and has 4G in the name and is NOT my phone type: https://www.gsmarena.com/xiaomi_redmi_note_11_4g-11241.php
If this one fails to get you booted at the end, drop back a version and try that one. Check your phone box to see what region version phone you bought.
Unpack it to a folder and get the images for boot, dtbo and vbmeta. Put these files into your adb/platorm-tools directory in Windows. (you will need the boot and vbmeta images later if you choose to install Magisk) Since you ran adb already, then you must already have adb installed.
Open command prompt as root, change to that platform-tools directory.
fastboot devices (to ensure Windows sees you)
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash vbmeta vbmeta.img
Reboot system.
If this gets you booted, run Device Info HW app to see what version is actually installed, and look under About Phone as well.
EDIT: I corrected the 3 command lines above.

Sheist! said:
Enter fastboot, check your phone is unlocked.
fastboot getvar unlocked (response will be unlocked: yes)
If you are global, then get the fastboot version from here: https://xiaomifirmwareupdater.com/miui/spes/stable/V13.0.12.0.SGCMIXM/
This one is mine. Be careful you get the non-4g-in-the-name ROM for your 4g phone if yours is like mine:
Xiaomi Redmi Note 11 - Full phone specifications
www.gsmarena.com
Beware of the other one that has a Mediatek processor and has 4G in the name and is NOT my phone type: https://www.gsmarena.com/xiaomi_redmi_note_11_4g-11241.php
If this one fails to get you booted at the end, drop back a version and try that one. Check your phone box to see what region version phone you bought.
Unpack it to a folder and get the images for boot, dtbo and vbmeta. Put these files into your adb/platorm-tools directory in Windows. (you will need the boot and vbmeta images later if you choose to install Magisk) Since you ran adb already, then you must already have adb installed.
Open command prompt as root, change to that platform-tools directory.
fastboot devices (to ensure Windows sees you)
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash vbmeta vbmeta.img
Reboot system.
If this gets you booted, run Device Info HW app to see what version is actually installed, and look under About Phone as well.
EDIT: I corrected the 3 command lines above.
Click to expand...
Click to collapse
Sorry for the delayed reply.
It seems that my bootloader is still locked, so I cannot flash it using fastboot. Is that correct?
Is there a way to flash my device without losing my files? I really need to get my files

mhegz said:
Sorry for the delayed reply.
It seems that my bootloader is still locked, so I cannot flash it using fastboot. Is that correct?
Is there a way to flash my device without losing my files? I really need to get my files
Click to expand...
Click to collapse
Then ignore my steps, since they won't work on a locked bootloader. I will defer to others who have clues regarding a locked bootloader and a down system.
You COULD try to unlock it, but that would definitely wipe all your data:
"Unlocking the bootloader will wipe all data"
Get the unlock tool and instructions here, if you so choose anyway:
Apply for permissions to unlock Mi devices
en.miui.com
NOTE: that gives you unlock version 6.5.224.28 but it might/should prompt you after install to install the updated version since mine is 6.5.406.31 from April of 2022. When you run it, it makes you wait a week.
NOTE 2: It does state this warning, however:
"First, confirm that your device can be unlocked
Your device functions normally and not in a bricked, soft-bricked, bootloop state."

mhegz said:
I need help, I did some research but I couldn't find a solution to my problem.
I know that others have a problem with rebooting to recovery when unlocking, but my problem is different. My phone is just stuck in a loop into recovery mode and won't boot normally even in safemode.
I haven't tried wiping the data yet because I want to save my files. Do you have a solution for this?
I turned on USB debugging before this bootloop happened.
Click to expand...
Click to collapse
I am facing same problem my phone is stuck in recovery mode it keeps rebooting I have tried selecting safe mode recovery reboot but it keeps rebooting did you find a solution to this problem please let me know.Thank you.