[Q] I made an oops - G1 Q&A, Help & Troubleshooting

Hi,
I know this has likely already been covered, but I'm overwhelmed with school and can't sacrifice anymore time to sitting and browsing through old threads right now.
Long story short, I was running CM6.0.1-RC1 (HTC Dream, Rogers, 32b) when my phone's microphone seemed to stop working. I could call people and receive calls but they could never hear me. Google voice search also wouldn't register any sound from the mic.
Fast forward a few hours and instead of just installing CM6.0, which had been running pretty much fine, I'm now on hboot 0.95 and radio 2.22.27.80 in an attempt to flash ezterry's 2.2
I've tried tubaking182's downgrade guide and all I get when I get to the rgb screen is "not allow"
Also, when trying to flash anything via SDK I get "Signature: verify fail" whenever I try to flash anything.
If there are any other details I can provide just say so. I would really appreciate some help as I haven't got a backup phone.

Related

GPS Cant get fix w/newest cyan roms/what are best alternative radiis?

In the recent cyanogen roms since 4.19 which required flashing with the htc radio my gps has stopped getting fixes. I am limited to only cell tower location. Maybe this is a radio issue? If so what is the best radio alternative which will work with cyanogen roms? I need my gps back. Thanks.
I just tested gps on my dream with cyan 4.2.1 on top of the htc flash. Working with no problems, even indoors. If you don't get any better tips, I would suggest installing again, and this time wipe ext3 partition in addition to wiping, and don't restore anything from backup for root users etc. before you check the GPS.
Hi
This may not be a tip, but i had the same problems when i upgraded rom, I had copilot and Ndive that worked prior, But stopped after urgrading rom to CYAN 4.1.999
Only solution i found was to try other alternatives, the only one i got to work flawlessly was Sygic mobile maps 9 V7.71, gets a fix almost immediatley and works Perfecto.
Hope this helps
I have the exact same problem!
I flashed cyan 4.21 and stopped getting GPS fix. I wiped, wiped ext3 and installed enomther AOSP 1.6 without the expansion pack. I can't get a gps fix anyway...
axlastro said:
I flashed cyan 4.21 and stopped getting GPS fix. I wiped, wiped ext3 and installed enomther AOSP 1.6 without the expansion pack. I can't get a gps fix anyway... What the hell did cyan do this time. He really messes up basic functionality on android, I think that's why google are trying to stop him.
Click to expand...
Click to collapse
Christ, thats an ignorant post
Cyanogen does not "mess up basic functionality", 99.9% of people running his roms have no such problems, myself included. It was probably something you missed or did wrong in the process. Did you follow the steps in his first post carefully, it is a more convoluted process coming from 4.1.11 because of the changes required by Google. In any case, rooting and installing custom roms has its risks and you chose to accept those risks, stop trying to blame someone else when it goes wrong. Take some responsibility, be constructive and try to find a solution instead of crying about it.
Incidentally, the reason Google had an issue with cyanogen was, completely legitimately, because his roms included some of their closed source apps (mail, youtube, market etc) hence why his new roms do not include those and Google are fine with him now. Try reading about it before you shoot your mouth off
I'm trying to work out the problem right now. I wiped again and installed another rom - not cyanogen. The problem is still here. It seems to be a problem that not only I have. It's quite possible that I, and others having the same issue, haven't followed the instructions correctly or did something else wrong.
Try flashing the radio
http://android-roms.googlecode.com/files/ota-radio-2_22_19_26I.zip
Well, seeing as my GPS just got a fix indoors with Cyanogen's 4.2.2, I think the problem is with you.
Now, without posting what you have done to get your phone to the state it is in now, how in the world can we help figure out what went wrong? This really seems like an isolated incident, and obviously not one that is suggestive of Cyanogen's rom being faulty (pretty damn insulting of you to blame him) since you have the problem even after flashing a rom that you give so much praise to for being 'stable'.
So..... how about you reconsider what you might have done to your phone, and try some troubleshooting...
1. When I am having issues with my GPS, sometimes I find it helps to disable GPS (both wireless and sat), reboot my phone, re-enable them, and try again to get a fix.
2. Use GPS Status2 to see if it is connecting to any sats at all.
See what happens... Who knows, maybe there is something wrong with your phone (ever imagine that?).
Not trying to be rude, or bash you, but you were pretty rude and bashing towards Cyanogen, and then you said you had the problem with someone else's rom too...
daveid said:
Well, seeing as my GPS just got a fix indoors with Cyanogen's 4.2.2, I think the problem is with you.
Now, without posting what you have done to get your phone to the state it is in now, how in the world can we help figure out what went wrong? This really seems like an isolated incident, and obviously not one that is suggestive of Cyanogen's rom being faulty (pretty damn insulting of you to blame him) since you have the problem even after flashing a rom that you give so much praise to for being 'stable'.
So..... how about you reconsider what you might have done to your phone, and try some troubleshooting...
1. When I am having issues with my GPS, sometimes I find it helps to disable GPS (both wireless and sat), reboot my phone, re-enable them, and try again to get a fix.
2. Use GPS Status2 to see if it is connecting to any sats at all.
See what happens... Who knows, maybe there is something wrong with your phone (ever imagine that?).
Not trying to be rude, or bash you, but you were pretty rude and bashing towards Cyanogen, and then you said you had the problem with someone else's rom too...
Click to expand...
Click to collapse
First off. I have tried both steps you suggested.
With gps status I can see 4-5 satelites and the lower right of the display says 0 sats. So I can't get fix, the gps itself works. Could be a problem with gps.cfg, I'm going to look at it now.
The issue occured right after I flashed cyanogen 4.2.1 stable. Even afer wiping entirely and flashing another rom I have the same issue, So I suppose that that the problem might be radio related. I actually consider there might be a problem with the phone, but a user who started this thread also had similar problem after going to cyanogen build. Maybe he did the same mistake as I did. Many times I have installed roms and had no issues while others had them - sometimes they occur sometimes they dont - depending on what spl/radio you are on, even what network you are on and what ROM you are coming from. Sorry for being that rude, I realize that now...
axlastro said:
First off. I have tried both steps you suggested.
With gps status I can see 4-5 satelites and the lower right of the display says 0 sats. So I can't get fix, the gps itself works. Could be a problem with gps.cfg, I'm going to look at it now.
The issue occured right after I flashed cyanogen 4.2.1 stable. Even afer wiping entirely and flashing another rom I have the same issue, So I suppose that that the problem might be radio related. I actually consider there might be a problem with the phone, but a user who started this thread also had similar problem after going to cyanogen build. Maybe he did the same mistake as I did. Many times I have installed roms and had no issues while others had them - sometimes they occur sometimes they dont - depending on what spl/radio you are on, even what network you are on and what ROM you are coming from. Serry for being that rude, I realize that now...
Click to expand...
Click to collapse
We all get upset when things don't work that we expect to, my suggestion about that is to go back and clean up your posts before Cyanogen reads them (hopefully) so as to avoid pissing him off.. He has given us so much, and we don't want to alienate him on XDA...
Anyway, about seeing satellites but not getting a fix, have you tried re-flashing the radio?
You said you have wiped, and flashed two different ROMS. The possibility of it still being a software issue are slim (but still there), if the radio doesn't help... it just may be a hardware thing.
I have never had mine get locks on satellites and not lock-in my position.
I know this stuff has been mentioned, but here is your basic troubleshooting process. Complicated, I know. Shouldn't take all day.
Download GPSStatus2 from the market and check to see if it is connecting to any satellites at all.
a) Go outside, away from buildings and trees, and open GPSStatus2. If it connects to 1 satellite, your receiver is working and it's probably some fluke of atmospheric interference (rain, dust, clouds, temperature, vapor, fog all affect microwave transmission; even air quality) that it can't connect to more. Try some different areas with different weather.
b) If it connects to zero, reinstall radio image from the link a few posts up.
c) Still no luck, go all the way back to stock firmware (flash OriginalSPL if you have DangerSPL installed, then RC29) and let it update to Donut, try again.
d) If it's still not working, your GPS happened to randomly die or something. Call T-Mobile cause you need a warranty replacement. They will send you a new phone, you send the old one back.
You know... if you are only trying google maps, try downloading some alternatives. One off the top of my head is RMaps.
I'm flashing the radio now. I have tried the other steps. I tried to get a fix from different locations, now I'm in the mountains and the device has a clear view to the north, where most sattelites are supposed to be... Yes it could be a hardware issue. As you can see another userr ATINsa, who started the topic has the same issue.
still problems
I don't know why you are attacking that guy. There is a problem. I had it on my old dream which was just stolen and replaced. And now I have it with the replacement. Prior to 4.19 and the radio you had to flash to keep cyan cool with google I had no problems. Google tracks, my maps editor, and google maps have a problem. When using wifi can sometimes connect more. The old cyan roms worked fined. Please don't try to explain to me how to use a gps. I have reflashed and redormatted. This has reccured with all roms since I had to replacwe the radio with the one required for him to be cool with google.
So the quesstion is, what other radios are the newest and will work with gps and cyanogens newest rom?
There are 2 people in this thread with the same prob. A third says google maps didn't work but anothewr gps program did. I have experianced this with2 googlde dev dreams. There is a problem and its not a user problem.
Something like this really sounds like a hardware issue. I don't mess around with the GPS code in my ROMs.
AntiNSA said:
I don't know why you are attacking that guy. There is a problem. I had it on my old dream which was just stolen and replaced. And now I have it with the replacement. Prior to 4.19 and the radio you had to flash to keep cyan cool with google I had no problems. Google tracks, my maps editor, and google maps have a problem. When using wifi can sometimes connect more. The old cyan roms worked fined. Please don't try to explain to me how to use a gps. I have reflashed and redormatted. This has reccured with all roms since I had to replacwe the radio with the one required for him to be cool with google.
So the quesstion is, what other radios are the newest and will work with gps and cyanogens newest rom?
There are 2 people in this thread with the same prob. A third says google maps didn't work but anothewr gps program did. I have experianced this with2 googlde dev dreams. There is a problem and its not a user problem.
Click to expand...
Click to collapse
The thing is, the radio that is flashed with the HTC system image, should be the same radio that you were already running on your phone. I don't think that has been changed since 1.5 came out.
And the problem with your theory of this being more than just an isolated incident is this: most people aren't experiencing this problem, only a handful (two or three people here or there does not a system problem make).
I'm 26 years old and have had windows mobile devices and now I've been on android for about half an year. I have used linux back in school when most of the kids here, blindly defending cyanogen were toddlers. I didn't mean to attack cyanogen or whoever else. It's just that the problem is with at least 2 or 3 people and maybe more. The right thing to do is to calm down and try to go back to a state which works. I have reflashed radio and gone to AOSP donut build. Still no luck. When you wipe you wipe /data and /cache right? What about /system ? I bet it's some of the libraries that have something to do with controlling GPS hardware, which remains after a wipe. It would be a nice idea to flash the SPL again. It will probaby clean things up. This is the next thing I'm going to try. It's a good time for someone with better knowledge of how android works step up and give any other ideas.
For now try :
Flash SPL again (whatever SPL you are using)
Flash Radio (latest one from htc developer site)
Flash some basic rom, like TMO cupcake or donut and let's see of it works. That's what I'm trying to do now. If this doesn't help, we might try the proposed reverting to stock spl and RC29.
axlastro said:
I'm 26 years old and have had windows mobile devices and now I've been on android for about half an year. I have used linux back in school when most of the kids here, blindly defending cyanogen were toddlers. I didn't mean to attack cyanogen or whoever else. It's just that the problem is with at least 2 or 3 people and maybe more. The right thing to do is to calm down and try to go back to a state which works. I have reflashed radio and gone to AOSP donut build. Still no luck. When you wipe you wipe /data and /cache right? What about /system ? I bet it's some of the libraries that have something to do with controlling GPS hardware, which remains after a wipe. It would be a nice idea to flash the SPL again. It will probaby clean things up. This is the next thing I'm going to try. It's a good time for someone with better knowledge of how android works step up and give any other ideas.
For now try :
Flash SPL again (whatever SPL you are using)
Flash Radio (latest one from htc developer site)
Flash some basic rom, like TMO cupcake or donut and let's see of it works. That's what I'm trying to do now. If this doesn't help, we might try the proposed reverting to stock spl and RC29.
Click to expand...
Click to collapse
If you wipe it wipes /data, if you flash a new rom it "wipes" (it really formats) /system and /cache. Nothing is left behind on /system...
Ok. I fixed the issue. I'm on danger SPL , newest radio etc...
I reflashed radio (as adviced above). Prior reflashing the radio wiped and installed enomther AOSP+ADP 1.6, with exp pack 2.11.
After that installed an app from market called GPS TEST (Don't know if it had something to do with GPS being fixed)
It detected 5 satelites right by the window indoors. Then Google maps found my location.
axlastro said:
I'm trying to work out the problem right now. I wiped again and installed another rom - not cyanogen. The problem is still here. It seems to be a problem that not only I have. It's quite possible that I, and others having the same issue, haven't followed the instructions correctly or did something else wrong.
Click to expand...
Click to collapse
well if you tried another rom and its still there .. then the problem might lie with your phone and not the roms you installing .... is anyone else around you with a G1 not getting gps location also ?

G1 running Hero with working BT?!

Has anyone seen this video?
http://www.youtube.com/watch?v=IlrQtaTH3ZE&feature=related
Person claims they somehow flashed Cyanogen's ROM the flashed Hero Over 1.1 and now you have Dream/G1 with working BT. Has anyone confirmed this is possible, or is this just some garbage?
Thanks.
From what I've read of the bluetooth/hero scenario, it doesn't sound plausible.. but I didn't watch the video cos I couldn't tolerate the repulsive music or the inabality to FOCUS HIS F*CKING CAMERA!!
I also don't see how it's possible to flash hero-over directly over CM, unless hero-over doesn't format the system partition as part of the flash process.. but I'd imagine that would cause all sorts of problems... This smells of horse **** to me, but we'll see if he comes out with a workable process.
Over the course of who knows how long the devs have been able to show bluetooth as on, this however doesn't make it useful if you can't have it connect to anything
I thought as much. Thanks for your input.
JAguirre1231 said:
Over the course of who knows how long the devs have been able to show bluetooth as on, this however doesn't make it useful if you can't have it connect to anything
Click to expand...
Click to collapse
The poster of this video claims to have transferred files over it..
i was able to turn on bluetooth a while back on a hero rom .... but u cant connect to anything
people post fake vids all the time...
right now the only solution ive seen is what maxisma posted about flashing the 32a magic spl on the g1 (dont try this unless your super experienced and know what your doing [ie...if you dont know what 32a or spl, you shouldnt even consider it])
He just replied to my request for a process..
mohfuzul12 has sent you a message:
THIS IS HOW I GOT BLUETOOTH ON MY G1?
1st
Download NOW!!!
http://rapidshare.com/files/287548589/recovery-RA-dream-v...
then when u finish downloading
To Install:
Copy it to your sdcard and open the Terminal Emulator app then type in this code:
su
(if a message pops up click always allow)
flash_image recovery /sdcard/recovery-RA-dream-v1.2.3.img
when u finish
just flash this hero over 1.1r3
here is the link
http://www.4shared.com/file/144480210...
when u done wit everything u should be running and cyanogen rom at the same time and also bluetooth will actually be working.
Click to expand...
Click to collapse
Riiiiiiiiiiiiiiiiiight.....
I'm calling shenanigans.
he probably has malicious apps to get your data lol
idk what hes smokin
raptoro07 said:
Has anyone seen this video?
http://www.youtube.com/watch?v=IlrQtaTH3ZE&feature=related
Person claims they somehow flashed Cyanogen's ROM the flashed Hero Over 1.1 and now you have Dream/G1 with working BT. Has anyone confirmed this is possible, or is this just some garbage?
Thanks.
Click to expand...
Click to collapse
I went to the site and pointed out the fact that no one in XDA has come up with a working HERO in that sense and this guy must have SERIOUSLY brainwashed a few of these kids. One of them started emailing me hate mail and attacking me on Youtube just for questioning the situation.
There's another guy named ItsAnAndroidWorld who's got a video claiming the same thing only he never goes into the bluetooth and tries to turn it on.
I've been reading about using bttest and hcitools to get it working on a HERO rom but i didn't have much luck with HERO Sense. It must only work on a very specific HERO rom.
Yeah, i'm definitely with you guys because i've googled all over for an answer to the HERO rom problem with BT, and there are some possible solutions, but.....i'm not risking bricking my phone just to see if they're right.

[Q] bell galaxy s UGJG9 vs. UGJH2 differences

Hey guys, my samsung galaxy s has the UGJG9 firmware installed. was just wondering what the difference is between that and the latest one?
New JH2 + SPL fix
Samsung Mobile Canada Thank you for your continued patience on the three-button reset issue. Your feedback is important to us and we are pleased to provide a resolution for Bell Mobility’s GT-I9000. Please find full details posted in the link below.
Samsung Galaxy S Vibrant (GT-I9000) Software Upgrades for Handsets with Original Production Software
A software upgrade is now available for Bell Mobility Galaxy S Vibrant handsets, provided the device has original production software (JG9). The latest version of Kies has been tested and will resolve the three-button recovery issue. Please note, this solution is for Canadian devices only....
By:Samsung Mobile Canada
Click to expand...
Click to collapse
http://www.facebook.com/samsungmobilecanada
Apparently they released the JH2 again but including a SPL fix, so people already on JH2 will need to flash back to JG8 or something, then flash forward to JH2 again to get the new SPL fix
I got JH2 the other day. Yesterday my phone was going retarded, freezing and losing signal when it never had before. Seemed ok last night and today though I haven't spent much time with it today.
GPS was totally out of whack last night, sitting still and my location was jumping all over the place. Google navigation is unusable. Checked compass in GPS essentials and it was fine but in nav it just spins around and can't get it right.
Youtube widget changed. Now shows most viewed on the main bar but video and search buttons are not functioning properly. Right now it only shows the search button. If I search or launch youtube then go back the video button will be there but neither thet nor the search button will work. Wish I had just left it alone.
did you get the update with the spl fix?
and was your 3 button mode working for you before?
if not does it work with the new update?
lol so many questions... and thanks for the replies and the update on the firmware.
Just update dude. Everyone is experiencing various issues regardless of the firmware. I run 3 to 4 times a week using endomondo and the GPS tracks my route almost flawlessly. A few hitches here and there but nothing horrible.
My 3 button combo wasn't working at all and I was already on JH2. Had to do the registry trick to get Kies to flash the new JH2 on my phone and now it works. Upgrading to the new JH2 is the best choice to make, especially if you have plans on using a few mods.
I highly recommend the battery mod available on this forum after you upgrade. The SGS stock battery indicator is horrible and inaccurate, and I rather not waste my homescreen space on a battery widget.
Ya, did the update a few days ago. Three buttons work now and my gps doesnt think im in japan anymore (ya it was that bad) anyway definitely worth the update.
Sent from my GT-I9000M using XDA App
My 3 button mode worked before the update, I haven't tried it since. I haven't rooted and not sure yet if I will, will see how official 2.2 goes first.
Still losing signal though. Yesterday the girlfriend tried to call me and said she either got a busy signal (WTF) or it just went straight to voicemail.
Today I tried to make a call and had to redial two or three times because it kept losing signal. Def a problem with the phone and not anything to do with reception in my area. Only phone calls though, never lose signal when using data or market ect.
Guys, I'm a bit dense on this subject so please be kind.
I have JH2 on my Galaxy. I can't remember if I updated to this version via Kies.
So far, the 3-button recovery problem has not affected me. I haven't rooted Android (since I don't need SU rights), I haven't yet unlocked the phone (no need) and I haven't attempted any Android system updates. I guess I could be called an average user. I haven't tested the 3-button issue.
What circumstances could arise down the road, which would make it necessary for me to do a 3-button recovery? In other words, is this a problem which could affect all Galaxy owners?
Thanks.
androiderer said:
Hey guys, my samsung galaxy s has the UGJG9 firmware installed. was just wondering what the difference is between that and the latest one?
Click to expand...
Click to collapse
I updated to JH2 prior to the SPL fix inclusion and found it to be better than JG9...smoother and less lag issues. Just make sure to backup everything.
My phone is still on jg9. It never had the three button issue it always worked for me. If I upgrade to jh2 how will this affect me?
Sent from my GT-I9000M using XDA App
MaestroSeven said:
My phone is still on jg9. It never had the three button issue it always worked for me. If I upgrade to jh2 how will this affect me?
Sent from my GT-I9000M using XDA App
Click to expand...
Click to collapse
if it was working, it will continue to work
if it was NOT working, it will now work
TheChancellor said:
Just update dude. Everyone is experiencing various issues regardless of the firmware. I run 3 to 4 times a week using endomondo and the GPS tracks my route almost flawlessly. A few hitches here and there but nothing horrible.
My 3 button combo wasn't working at all and I was already on JH2. Had to do the registry trick to get Kies to flash the new JH2 on my phone and now it works. Upgrading to the new JH2 is the best choice to make, especially if you have plans on using a few mods.
I highly recommend the battery mod available on this forum after you upgrade. The SGS stock battery indicator is horrible and inaccurate, and I rather not waste my homescreen space on a battery widget.
Click to expand...
Click to collapse
how do you do this hack, i wanna put my bell rom back on the phone, i flashed to 2.2 froyo and wanna go back to bell rom now.
please link me
hansonator said:
My 3 button mode worked before the update, I haven't tried it since. I haven't rooted and not sure yet if I will, will see how official 2.2 goes first.
Still losing signal though. Yesterday the girlfriend tried to call me and said she either got a busy signal (WTF) or it just went straight to voicemail.
Today I tried to make a call and had to redial two or three times because it kept losing signal. Def a problem with the phone and not anything to do with reception in my area. Only phone calls though, never lose signal when using data or market ect.
Click to expand...
Click to collapse
I havent been able to update to JH2 from JG9 (trying to use kies but thats a prize in itself) but I have in the past gotten where I would try to call, and as the call dropped while still dialing it would tell me the radio is off. Or it would tell me im in airplane mode etc.
Now for the last 24 hrs I have yet to be able to make a call, although datta and texting works perfectly fine, every time I make a call it says my radio is off. And the same problem when someone calls, they are lucky if they get a fast busy signal.
Im talking with bell to get a replacement in store, if not I have a 'insurance' plan that'll give me a loaner etc while they ship it out.
Any update on whether your phone is still dropping into Flight mode?

[Q] CyanogenMod 7 ROM for Samsung Captivate

I ran into this article yesterday, How to Flash CyanogenMod 7 ROM Samsung Captivate AT&T, and felt it was about time to learn about this. Plenty of you have already ROOTED your phones, and know from experience, what to do. But, I don't. Right now, I'm stuck with the options of accepting things don't work right, because of AT'T's unwillingness, or inabilility, to correct the issues I have, or reinsiall new, and lose all I've put on, or send back to Samsung for repair, and have them lose all I have on it, or try Rooting and adding a ROM, that may solve my issues. But to do that, I need a little help in understanding it.
First, if I try and run a program, like CyanogenMod 7, and it doesn't work correctly, snd screws up my phone, is there a way I can reinstall Android, and start over, or is that the proverbial kiss of death for my Captivate, and I'm stuck with it like that?
Second, is this the right ROM to try? AT&T can't fix my BLOCKS, of UNKNOWN APPS. The Settings change is easy, you click on activating Unknown, in Application settings..., unless you have no UNKNOWN, to choose. Also, in MMS settings, AT&T shows in a tutorial, that you have the option, of activating Delivery Report and Read Report. It shows this as plain as day, on that tutorial for the Captivate, yet mine, has NEITHER OF THOSE OPTIONS. Also, to TURN ON EDGE, the setting is missing, so I can't activate EDGE, which I guess is no big thing, since the towers AT&T has for us to connect with, THAT ARE 2G, are in such poor condition, no one can connect to them. Thank you, WIFI, for helping me get, ONLINE. Will this, or other ROM's, solve this for me?
If there are any suggestions of how to do this, and what to use, I'd appreciate hearing it from you. Again, I thank any effort, to help me.
1.cm 7 would not be the best rom to flash for your first time.
2. All roms are android, you are running at&t/samsung version of an android rom...
3. Yes you can get back to your stock rom if you don't like/something goes wrong (other than a bad bootloader flash)
4.all custom roms have all the blocking done by at&t removed so switching to 2g(edge) is possible and also faster 3g speeds known as hspa. And unknown sources is in the settings so you can install apps from outside the market.
5.the threads at the top of every section with a little thumb tacks are called stickies, give those a read through.
Like he said above. If you want the pretty much stock experience that your used to but want it fixed then I would suggest starting off with Cognition 4.4 or whatever it is now.
Sent from My KickAss Captivated CM7 OC'd 1.55Ghz/Undervolted
From newbie to a newbie, I took the advice of others and read threads for atleast a month before I flashed my first rom. My choice was Andromeda3, It has a written tutorial and a video on how to from start to finish. From what tools or apps you will need and how to use them , I watched that atleast 6 times and also while I was flashing the kernel and the rom. It may have been overkill but my flash was perfect and I'm real happy with my phone now. You may not go with the same rom I did but do your self a favor and do what I did to prepare for your first flash.

[Q] Trouble with no calls or text

My girlfriends D3 has gradually been getting worse with poor reception, dropping calls, not being able to make/receive calls or texts.
Data seems to work fine. This weekend it just finally stopped being able to make calls or send texts from our home.
If i drive a few miles down the road or to a higher elevation i was barely able to call *228 to update roaming.
I can still use the browser over 3G and Wifi, just no tethering, phone or text.
The phone shows 3G and a full signal, but as soon as i initiate a call it drops to 1 bar.
Another thing we noticed this morning is that when calling the phone it goes straight to voicemail.
I had tried changing the Network mode from Global to CDMA yesterday and at one point got an error message saying "No CDMA networks were found. Would you like to switch to Global Mode?"
Phone has been rebooted and battery pulled along with some other diagnostic tests that the verizon techs did over the phone yesterday.
The only thing i had done to this phone was i applied the TBH tethering hack without root over a year ago. It worked fine up until now.
The phone has the latest System version 5.7.906.XT862 and the latest Baseband N_03.18.32P.
Im thinking of reverting the TBH Tethering hack back using the instructions in this post
I spoke to Verizon tech support yesterday and they said there was some trouble in our area, but my Droid X is still able to connect so i doubt thats the issue.
Does anyone think that an OTA update from Verizon may have screwed something up due to the TBH hack being applied?
The GF is frantic about getting her phone back. I can take out insurance for 6.99 pr/month and pay $100 to get her a new phone, but if reverting the TBH hack and maybe rooting and installing a new ROM might help, im all for it.
Any thoughts? ROM advice? Was reading up about the AOKP Build 40 ROM, but wondering if all the hoop jumping will help or if the D3 has a hardware issue that has just got progressively worse.
Wont you help a poor guy keep the peace with his lady please?
I don't think it's that. It's possible that the 3G in the area is good but 1x is crap. 3G is just used for data while calls/texts are used on 1x. What is the PRL versions your phone and her phone have?
MrObvious said:
I don't think it's that. It's possible that the 3G in the area is good but 1x is crap. 3G is just used for data while calls/texts are used on 1x. What is the PRL versions your phone and her phone have?
Click to expand...
Click to collapse
My Droid X running on VXLR V2.2.0: PRL 53018
Her Droid 3 Stock w/TBH Tethering Hack: PRL 52996
Just tried updating them both and the PRL's stayed the same.
About an hour ago i was in the middle of backing up her phone and it started ringing. I was able to answer the call and now im able to make and receive texts and calls. There must have been a tower issue. The signal still drops to 2 bars when i initiate a call, but at least its working again.
She says its been flaky for quite a while with dropping calls and texts not getting sent. Im all backed up and was thinking of rooting and trying a ROM on this. Not sure if itll help with signal issues, dropped calls or texts not being sent or received.
She was also complaining about the thing pocket dialing, and other random stuff happening like her browser launching and texts being sent etc. I saw it this morning. I picked up her phone to bring it downstairs and saw that there was a text reply box open with a bunch of jibberish typed in it. She says that sort of thing happens all the time.
Think maybe a good stable ROM might help?
After a little more research i came across Minimoto here at XDA. Minimoto Link
Seems to be the way to go if im sticking to a GB ROM. I see you contributed some to it. Would you happen to know where some step by step instructions for getting it installed on a non rooted D3 might be?
1) Root it.
2) Install Safestrap 3.05.
3) Reboot to it, create ROM-Slot 1.
4) Factory reset and wipe cache and delvik.
5) Flash the ROM.
6) Set her up with goodness.
Though if random crap is popping up, I suspect the digitizer is flaky.
MrObvious said:
1) Root it.
2) Install Safestrap 3.05.
3) Reboot to it, create ROM-Slot 1.
4) Factory reset and wipe cache and delvik.
5) Flash the ROM.
6) Set her up with goodness.
Though if random crap is popping up, I suspect the digitizer is flaky.
Click to expand...
Click to collapse
Have you heard of digitizer issues with D3's before?
Any recommendations on which rooting method to use?
Do i have to remove the TBH Tether hack before rooting, installing Safestrap or Flashing the ROM?
So i take it your in agreement that this would be a good choice for a stable no frills GB ROM?
the random stuff can be from from a bad digitizer, dirt/grime on digitizer/edge or a software conflict
try cleaning screen around the edge, and/or flash rom/sbf
you need to remove bootstrap before safestrap, tbh hack should be fine
i haven't use minmo, but many have, also you could look at
http://forum.xda-developers.com/showthread.php?t=2106722
use the Deodexed ROM (Courtesy of thingonaspring) link
sd_shadow said:
the random stuff can be from from a bad digitizer, dirt/grime on digitizer/edge or a software conflict
try cleaning screen around the edge, and/or flash rom/sbf
you need to remove bootstrap before safestrap, tbh hack should be fine
i haven't use minmo, but many have, also you could look at
http://forum.xda-developers.com/showthread.php?t=2106722
use the Deodexed ROM (Courtesy of thingonaspring) link
Click to expand...
Click to collapse
Thanks sd_shadow I think ill stick with minimo most likely. Too many dam ROMS to choose from!.
Ok so from the hours of reading i did yesterday, i found a working link for motofail. It appears it is the best (or only) way to root the D3 if on 906.
From there i thought i could just install Safestrap 3.05 which i managed to track down as well.
I never installed Bootstrap, so does this even apply? Is there a factory bootstrap included with the D3?
I believe i read that minimoto has its own tethering feature included. So are we sure i dont have to revert the TBH tethering hack?
Some great links in your signature by the way. If the digitizer keeps acting up, i may try replacing it. I did clean it last night and will see if things improve.
LOTL said:
Thanks sd_shadow I think ill stick with minimo most likely. Too many dam ROMS to choose from!.
I think your the only person to say that for the d3 lol. Most of us are flash- a-holics and we love lots of roms to chose from.
Ok so from the hours of reading i did yesterday, i found a working link for motofail. It appears it is the best (or only) way to root the D3 if on 906.
From there i thought i could just install Safestrap 3.05 which i managed to track down as well.
I never installed Bootstrap, so does this even apply?
Just install safestrap on your safe system after root don't worry about bootstrap.
Is there a factory bootstrap included with the D3?
No
I believe i read that minimoto has its own tethering feature included. So are we sure i dont have to revert the TBH tethering hack?
No you do not have to undo the tether hack it is a hardwear hack not a software hack and will work on any rom no matter if the rom already has tethering in it.
Some great links in your signature by the way. If the digitizer keeps acting up, i may try replacing it. I did clean it last night and will see if things improve.
Click to expand...
Click to collapse
Sent from my DROID3 using XDA
replacing the digitizer is a pain
some [how to] links in my list

Categories

Resources