Related
Im some what of a newb here but I follow directions well. So I attempted to root my CDMA Hero after the 2.1 upgrade. I followed all the steps but when it says go to the tray bar and you will see superuser permissions I never do! its really aggravating because i have tried over 10 times by now. please help
Are you looking in the Notification Bar on top (you pull this down to open it) or the Application Tray from the bottom (press the button with a triangle inside the circle)? The Superuser Permissions app should be in the Application Tray.
bbriddick said:
So I attempted to root my CDMA Hero after the 2.1 upgrade.
Click to expand...
Click to collapse
Which upgrade?
If you ran the most recent RUU from the sprint site, it is already patched against root. You have to run the older version.
Go to: http://forum.xda-developers.com/showthread.php?t=694572
Scroll down to Regaw's second post and click on the link that says, "My Personal One I used for testing"
Run THAT Ruu.......THEN proceed to root via his instructions at the beginning of the post.
Good Luck.
P.S. Your software number must be 2.27.651.5
If it has a .6 at the end, you can't root
it is actually in with the other apps the ^ button
thanks!
Thanks alot! I now own a perfectly rooted HTC Hero!
bbriddick said:
Thanks alot! I now own a perfectly rooted HTC Hero!
Click to expand...
Click to collapse
So what finally worked for you?
Chaid said:
So what finally worked for you?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=6767990&postcount=3
If you downloaded the Sprint Update OTA after upgrading to 2.1 you will need to run the original 2.1 RUU then root.
switched
I switched the 2.1 software to the one that ends in .5 instead of .6
I had the same issue then realized that it was due to me being on the newer 2.1 and I cannot seem to get the phone to flash to the older one. I keep getting connection errors!!!
I heard a lot of it was due to windows 7 but people posted about the new htc sync that is windows 7 compatible is suppose to work. I have that yet i still get connection errors, and unfortunately i don't have any computer with an older os on it!
ebbinger_413 said:
I had the same issue then realized that it was due to me being on the newer 2.1 and I cannot seem to get the phone to flash to the older one. I keep getting connection errors!!!
I heard a lot of it was due to windows 7 but people posted about the new htc sync that is windows 7 compatible is suppose to work. I have that yet i still get connection errors, and unfortunately i don't have any computer with an older os on it!
Click to expand...
Click to collapse
Alright, I was able to solve my problem!
If you are getting a connection error just after phone reboots and attempts to go into boot loader try this:
1. Turn off phone
2. Boot into boot load by holding "Volume Down" and "Middle Scroller" and then push and hold down "Power/End Call" - you will be in boatloader when you see three skateboarding "dudes"
3. Push "Volume Up" to enter fastboot (usb) - you will see the top item on the menu say fastboot if you ARE NOT in it already
4. leave phone on and in bootloader and then start the RUU update and all should work!
This is what worked for me with my issue, hopefully it will help someone out - i know i was getting stressed out about it.
And sorry for posting in this thread for my issue.
Hey there, i have searched around for a day or so and found a similar post on here but no real answers thus far. There is a ton of information out there so i may have missed it but my phone is having issues so i really need to wipe and go back to stock, then update from there...
Running Cognition v2.2 Beta5.5 UCJ16. Love the rom but i have had some issues and decided to upgrade to the new Cog rom then found out i cant without going back to stock first. Tried to do that with "Odin" but i get the USB not recognized when going into download mode, Odin will not pick up the phone. I did read the entire Odin faq and saw that other ppl have had this issue but did not really find a solution. I can get into dl mode fine and i've never ever had an issue with my cpu not picking up the phone via the USB until now. Tried the adb reboot, volume buttons, everything in the faq, it's a no go & all my drivers are up to date. So far i can't do anything and it's getting a bit frustrating lol.. I rooted with the Galaxy S One click Root by TGA_Gunnman, not sure if that helps any.
Any help would be appreciated, thanks in advance!!
Also meant to ask, if i can't go upgrade to the new version of cognition can i flash from that one to a different rom and them maybe back to 2.1? I'm not a noob to rooting and flashing i did my last 2 phones and have rooted this one, i haven't had one single problem with anything of my phones until this one...
Try a different us port the ones on the back seem to work better
Already tried that same result, it won't recognize the device. I have to go out of town in a few days and need my phone to quit acting up lol. If i can't get it resolved by tomorrow i guess i'll just start trying to flash other roms and see if i can find one it will take and go from there..
CoolhandLocke said:
Already tried that same result, it won't recognize the device. I have to go out of town in a few days and need my phone to quit acting up lol. If i can't get it resolved by tomorrow i guess i'll just start trying to flash other roms and see if i can find one it will take and go from there..
Click to expand...
Click to collapse
Usb debugging turned on? You have odin opened up BEFORE you put your phone in download mode? Technically you don't have to odin to stock you just have to odin to a Rom that has 2e recovery. So you could try that if you can't get one click odin to work.
Sent from my SAMSUNG-SGH-I897 using XDA App
Yes i tried it with de-bugging turned on and odin running before hand. Pretty much tried everything in the Odin thread and about everything else i could find with google. The phone's just acting funky and not accepting it
CoolhandLocke said:
Yes i tried it with de-bugging turned on and odin running before hand. Pretty much tried everything in the Odin thread and about everything else i could find with google. The phone's just acting funky and not accepting it
Click to expand...
Click to collapse
How are you putting your phone into download mode?
Sent from my SAMSUNG-SGH-I897 using XDA App
I'm getting into download mode through doing the volume up/down then inserting the usb cable with the sim and everything out. I believe it's method 3 listed in the Odin post, it does go into download mode but i still get "USB not recognized" from both the front and back ports..
Finally got it fixed! Just tried it out on my friends laptop and everything worked flawlessly. Must be a problem in my Desktops USB somewhere but it is still odd as it worked fine and still does, just didn't work with Odin. I've seen other people with the same issue hopefully someone else can learn from my mistakes....Just try another PC lol.
CoolhandLocke said:
Finally got it fixed! Just tried it out on my friends laptop and everything worked flawlessly. Must be a problem in my Desktops USB somewhere but it is still odd as it worked fine and still does, just didn't work with Odin. I've seen other people with the same issue hopefully someone else can learn from my mistakes....Just try another PC lol.
Click to expand...
Click to collapse
I am glad you got it working cause I had ran completely out of ideas lol
Sent from my SAMSUNG-SGH-I897 using XDA App
Not to extend the thread but in my previous post i forgot to add, Thank you to all of you who tried to help!
Hey guys, please forgive me if I misuse my terminology here but I am still a padawan learner.
My wife's hero is rooted and running a cyanogen rom. All was well for months but now her usb plug is broken and NOT charging. I have not yet verified that the usb won't talk to the pc but I assume it's the case because I can't get the thing to charge. Of course i have tried 5 or 6 diff chargers, tried wiggling, etc. but i am convinced that there is a broken prong in the phones plug. The phone is under warranty for 2 more days but I understand that I need to flash it back to stock before trying warranty stuff.
I have searched and the answers I have found are to simply run the latest RUU from the htc website. I found it, no problem, but it is an .exe file and would require the usb to work, right? The phone is dead right now or i would test the usb>pc connection and I have arranged to briefly borrow a friend's battery later tonight. If i can't get the connection to work is there any other way to flash this thing back to stock? If I just download a stock rom and flash that then i will still be rooted right? Do they check that? and lastly what about running an OTA update? Any advice/ideas are greatly appreciated.
Come to think of it, I might have the original naandroid backup that i did of the phone back in the day. If i restore this, would it go back to stock?
Here's what you can do:
Go HERE and download the S-OFF bootloader.
Flash it
Download THIS - its the zip that gets uploaded/flashed when you run the RUU.
And..as per instructions on that page:
Simply rename this to HERCIMG.zip and place on the root of your SDCard.
Power your phone completely off.
Press and Hold VOL DOWN and POWER until your phone boots into HBoot mode.
Wait for it to verify the zip, then click <ACTION> (Trackball) to update, or <SEND> (Green Call) to cancel.
After it flashes you'll have a stock phone, with the stock bootloader
Its the same setup I have on my phone..Just in case I need to un-root on the fly Except I have two zips. One with the stock bootloader and one without so I can keep it unlocked.
Gotta love XDA, thanks so much. I may have found it if I had thought about searching for "stock sprint zip format". Hopefully the next guy will find this. I have been helped by your advice many times throughout the forums in my searches.
drumstyk1 said:
Gotta love XDA, thanks so much. I may have found it if I had thought about searching for "stock sprint zip format". Hopefully the next guy will find this. I have been helped by your advice many times throughout the forums in my searches.
Click to expand...
Click to collapse
You should add "or computer" to the title as well For those that may search 'unrooting without a computer'
And you're welcome that's why I'm here
Not working (yet)
Hi, another noob here: SAKKA.
I also need to revert to stock. I already switched the phone number (just upgraded and giving Hero to daughter). So have to push everything from Mac via USB. Unable to d/l md5sum: a77a2dee8e903e8f1a18b28b5c5e0b40 b/c it won't connect (too old?) Have HERC in root, did steps 1-4. But no go. Is there someway I can chat and get some help? Or do you know where i can chat now that AOSP is no longer running an online chat room (as far as I know)?
do u have any idea how old this thread is
Oh.
D'oh. Thanks.
That being said. Know how I can find someone to talk me through this?
sethfriedman said:
Oh.
D'oh. Thanks.
That being said. Know how I can find someone to talk me through this?
Click to expand...
Click to collapse
There is this help page :
http://forum.xda-developers.com/showthread.php?p=13479613
I always unroot with this:
http://forum.xda-developers.com/showthread.php?p=8551240
Then I root with the "one click method"
http://forum.xda-developers.com/showthread.php?t=743289
Both never fail me....
Good luck
V's CDMA Hero
V's CDMA Hero
i tried this! it was on the updating part and when it was almost done, the htc screen appear and it started all over with s-off. so it said fail.
Just curious, if phone is already activated to her # then why go back to horrible stock.
If u want a stock ROM flash liquid sense or nfx.
http://forum.xda-developers.com/forumdisplay.php?f=643
From either of those two ROMs u can do all that stock can.. like activation, PRL updates, etc.....
So unless its going for service under warranty there is no need to unroot to stock.
Good luck
V's CDMA Hero
Long story short, I've been haiving a bunch of problems, and someone pointed me to an update.zip file that might help me unroot my phone without needing a USB connection. When I go into recovery mode and select "install package", I get this message:
E:signature verification failed
installation aborted
Does anyone know what I may need to do in order to clear this up freaking problem?
first you might want to look at the stickies in general, thats what they are there for. if you dont find your issue SEARCH. 2 minutes of effort would have found you this http://forum.xda-developers.com/showthread.php?t=1052991
studacris said:
first you might want to look at the stickies in general, thats what they are there for. if you dont find your issue SEARCH. 2 minutes of effort would have found you this http://forum.xda-developers.com/showthread.php?t=1052991
Click to expand...
Click to collapse
Omg.. Another signature failed issue lol
Thanks for taking care of this one Studa
My apologies. I did look at the "related topics" that came when I did my post, but that one didn't come up. Guess I wasn't through enough.
I'm pretty new to all this, and I'll admit that part of that linked thread is a bit over my head so this may be another stupid question. My main issue is that I get an error trying to connect via USB, and it looks like all those fixes require Odin 1 click. Does one of those methods allow for the fix without a USB connection (I do think I have the ability to get a file from the computer to my phone via the external SD card).
Girevik said:
My apologies. I did look at the "related topics" that came when I did my post, but that one didn't come up. Guess I wasn't through enough.
I'm pretty new to all this, and I'll admit that part of that linked thread is a bit over my head so this may be another stupid question. My main issue is that I get an error trying to connect via USB, and it looks like all those fixes require Odin 1 click.
Click to expand...
Click to collapse
What you mean you get an error connecting the USB? Could you be more precise?
Also, the signature failed fix is quite easy. Tbh, you simply have to have your phone plugged in in debugging mode and run the .bat file.
Please explain your usb issue.
BWolf If the phone won't connect to usb he can't use the .bat
studacris said:
Please explain your usb issue.
BWolf If the phone won't connect to usb he can't use the .bat
Click to expand...
Click to collapse
I know, I know. I was saying for when/if it works. Duh
When I try to connect via USB I get a "USB Device Malfuctioned" error. (Which I HAVE searched on ) that I can't seem to find a fix for. I've tried it on 3 different computers, each with a different version of Windows, with the same result so don't think it's a driver issue.
I've done a factory data reset (several atually) and am still having problems, so I'd like to get a warranty replacement. But my phone is rooted so I'm worried about them voiding my waranty. Basically where I am now is tryign to find a way to unroot my phone without the USB so I can get it replaced. That lead me to the signature verifaction error and the shame of a premature post.
how loose are your ethics?
if your phone doesnt boot at all they can't tell if its rooted. a few 2 second bursts in the microwave should do it, don't do it any longer than that at a time. you don't wanna have any physical signs you just wanna fry the curcuits.
just PLAY DUMB and you should get a warranty replacement.
studacris said:
how loose are your ethics?
if your phone doesnt boot at all they can't tell if its rooted. a few 2 second bursts in the microwave should do it, don't do it any longer than that at a time. you don't wanna have any physical signs you just wanna fry the curcuits.
just PLAY DUMB and you should get a warranty replacement.
Click to expand...
Click to collapse
I'm not opposed to hiding the fact that it's been rooted, or if a fix I tried bricked it I'd be okay returning it, but I'm not sure I want to go as far as frying it in a microwave.
I've been looking for an ap in the market that would unroot for me, but so far none of the ones I've found have worked for me. Do I have no other options for something I could load directly to my phone via the SD card (I do have the ability to put something on my external SD card and transfer it over to the phone)?
Girevik said:
I'm not opposed to hiding the fact that it's been rooted, or if a fix I tried bricked it I'd be okay returning it, but I'm not sure I want to go as far as frying it in a microwave.
I've been looking for an ap in the market that would unroot for me, but so far none of the ones I've found have worked for me. Do I have no other options for something I could load directly to my phone via the SD card (I do have the ability to put something on my external SD card and transfer it over to the phone)?
Click to expand...
Click to collapse
no apps that i know of work for froyo to root/unroot without needing a computer and a working usb port ... what you will have to try is fix the 3e recovery manually. i dont think that update.zip will unroot, it just roots, but you could try. If that doesnt work go grab cognition rom from development flash that but while its in the process pop the battery out. if youre "lucky" you will either get a "phone....!....pc" screen or a hard brick in either case all eveidence will be erased.
this process will require some research and learning on your part...
Are you SURE you have the correct drivers for your computer? When I tried to use my phone on someone elsewhere computer the computer would not install it until I installed the samsung drivers from the odin one click post.
Can you get into download mode? Method varies based on build number or phone. Try turning your phone off, holding the two volume keys and plugging in usb, if you see a big yellow triangle with an android and a shovel you are in download mode. Once in download mode the computer will see your phone as a different device and install more drivers. If all that works, you can use odin one click to go back to stock.
Once back to stock your problem may be fixed anyway, if not it will be unrooted and you can return it to att. Morals intact.
Sent from my Captivate running FireFly
studacris said:
no apps that i know of work for froyo to root/unroot without needing a computer and a working usb port ... what you will have to try is fix the 3e recovery manually. i dont think that update.zip will unroot, it just roots, but you could try. If that doesnt work go grab cognition rom from development flash that but while its in the process pop the battery out. if youre "lucky" you will either get a "phone....!....pc" screen or a hard brick in either case all eveidence will be erased.
this process will require some research and learning on your part...
Click to expand...
Click to collapse
lol Studa, you should stop helping people with their phone and start helping them destroy it
As for Cognition, it flashes the 2nd bootloader (sbl.bin) and once you start playing with bootloaders, you increase your chance of bricking. Which is why Studa suggested it.. Basically, you could just unplug your phone when Odin if showing Sbl.bin and you would have a brick in your hand = You bring it to the store saying it never turned on again after updating through Kies.
But like Studa said, you have some reading to do
quarlow said:
Are you SURE you have the correct drivers for your computer? When I tried to use my phone on someone elsewhere computer the computer would not install it until I installed the samsung drivers from the odin one click post.
Can you get into download mode? Method varies based on build number or phone. Try turning your phone off, holding the two volume keys and plugging in usb, if you see a big yellow triangle with an android and a shovel you are in download mode. Once in download mode the computer will see your phone as a different device and install more drivers. If all that works, you can use odin one click to go back to stock.
Once back to stock your problem may be fixed anyway, if not it will be unrooted and you can return it to att. Morals intact.
Sent from my Captivate running FireFly
Click to expand...
Click to collapse
I'm pretty sure on the drivers. I removed what I had and re-installed from a link I found online. From the searching I've done it seems that "Device Malfunctioned" error is the kiss of death. I've not found anyone yet who's recovered from that.
I remember getting into dowload mode when I did the update to 2.2 but don't recall the method. plugging in the USB cable with the volume buttons pressed just powers up the phone.
Girevik said:
I'm pretty sure on the drivers. I removed what I had and re-installed from a link I found online. From the searching I've done it seems that "Device Malfunctioned" error is the kiss of death. I've not found anyone yet who's recovered from that.
I remember getting into dowload mode when I did the update to 2.2 but don't recall the method. plugging in the USB cable with the volume buttons pressed just powers up the phone.
Click to expand...
Click to collapse
The method is actually a bit different then what he mentionned:
Unplug usb;
Pull battery;
Hold volume buttons (and keep holding no matter what);
Plug usb in your pc and then your phone;
Put the battery back in and wait until the android with a shovel shows up.
It can take a few tries too before it works.
studacris said:
what you will have to try is fix the 3e recovery manually.
Click to expand...
Click to collapse
Was that one of the options in the sticked in the response to my original post? If so I must've missed it....
BWolf56 said:
lol Studa, you should stop helping people with their phone and start helping them destroy it
As for Cognition, it flashes the 2nd bootloader (sbl.bin) and once you start playing with bootloaders, you increase your chance of bricking. Which is why Studa suggested it.. Basically, you could just unplug your phone when Odin if showing Sbl.bin and you would have a brick in your hand = You bring it to the store saying it never turned on again after updating through Kies.
Click to expand...
Click to collapse
But doesn't Odin require a USB connection? I guess I thought flashing any rom required a USB connection.
BWolf56 said:
lol Studa, you should stop helping people with their phone and start helping them destroy it
As for Cognition, it flashes the 2nd bootloader (sbl.bin) and once you start playing with bootloaders, you increase your chance of bricking. Which is why Studa suggested it.. Basically, you could just unplug your phone when Odin if showing Sbl.bin and you would have a brick in your hand = You bring it to the store saying it never turned on again after updating through Kies.
But like Studa said, you have some reading to do
Click to expand...
Click to collapse
Hahaha I know this is a nice change.
But with his usb issues I doubt odin will ever recognize the phone.
Girevik said:
Was that one of the options in the sticked in the response to my original post? If so I must've missed it....
But doesn't Odin require a USB connection? I guess I thought flashing any rom required a USB connection.
Click to expand...
Click to collapse
No flashing a rom doesn't require odin. And the manual fix should be on the sticky
Girevik said:
Was that one of the options in the sticked in the response to my original post? If so I must've missed it....
But doesn't Odin require a USB connection? I guess I thought flashing any rom required a USB connection.
Click to expand...
Click to collapse
No, you actually shouldn't flash a ROM with the usb plugged in (UNLESS using Odin lol). I guess my point was that you could have Cognition on your ext sd card and flash it but didn't think about the signature failed.
studacris said:
Hahaha I know this is a nice change.
But with his usb issues I doubt odin will ever recognize the phone.
No flashing a rom doesn't require odin. And the manual fix should be on the sticky
Click to expand...
Click to collapse
You could always get Root Explorer and switch the recovery by yourself from your phone. That's actually what I did back when I was on 2.2 - Then again, you have to pay for Root Explorer and you have some more reading to do if you wanna take that path.
BWolf56 said:
No, you actually shouldn't flash a ROM with the usb plugged in (UNLESS using Odin lol). I guess my point was that you could have Cognition on your ext sd card and flash it but didn't think about the signature failed.
You could always get Root Explorer and switch the recovery by yourself from your phone. That's actually what I did back when I was on 2.2 - Then again, you have to pay for Root Explorer and you have some more reading to do if you wanna take that path.
Click to expand...
Click to collapse
1. I don't think you can flash from the external sdcard, he will have to download it with the phone itself to get it on the internal sdcard.
2. The root explorer method is the manual fix I'm talking about.
studacris said:
1. I don't think you can flash from the external sdcard, he will have to download it with the phone itself to get it on the internal sdcard.
2. The root explorer method is the manual fix I'm talking about.
Click to expand...
Click to collapse
That was imployed but Fine be that way! lol
So yea, OP - Beside all that Team confusion we're having here.. Go read/keep reading the Sticky about 3e recovery fix and if you think you can do it. Do the manual fix (getting Root Explorer and moving the recovery file by yourself) and get Cognition on your external and move it to your internal sd card.
(There I'm being clear Studa )
hey guys i have a captivate that i tried flashing and was successful then i tried again and the screen went black. im not sure if my battery died during the process or what but idk what to do. I cant get into recovery mode, i can only get into downloading mode but none of the odin's ive downloaded have recognized my device today. they worked fine yesterday. then i tried "hemidall one click" to try and get it back to stock but no luck. also when i try to power on I get the "Cornkernel" loading screen since that was the kernel i had loaded when it was working, but it fills the bar then shuts off. so it seems like im going to be at the mercy of a computer program since i am unable to access anything on the phone, right? I recently upgraded to gingerbread before all of the flashing of the new roms. all i want is to get back to either froyo or gingerbread, i dont really care, heck ill even take 2.1 at this point. if anyone knows whats going on and can help me thatd be great.
Thanks
Remember to use a rear usb hub for destop and run as admin. Heimdall will mess up your odin drivers.
You may also want to check out the captivate connection issues thread.
Also, to clarify further on prbassplayer's point about Heimdall, it will write its drivers over the drivers assigned to the USB port you are plugged into when it detects your phone. So if you have 4 USB ports and you use port 3 for Heimdall, it would look like this:
1 - Odin port
2 - Odin port
3 - Heimdall port
4 - Odin port
All this means is that you'll need to be aware of the port you used with Heimdall, or just reinstall the odin drivers (they'll overwrite the Heimdall setup).
OK so i tried what you mentioned in that thread on the connection issue and unfortunately it didn't work. is there a way i could start fresh? like delete all the drivers from my computer and then try it again, or do u not think that would work? im open to any ideas/suggestions right now because i hate having an extra paperweight and the thought of buying a new phone.
Don't know if this'll help or even why it worked for me but, when I had problems with odin recognizing my phone, I reinstalled/repaired samsung kies and odin would work for at least one flash.
Note: used full odin (not oneclick)
Good luck
hey guys thanks a bunch i finally got it to work. i had to use a different computer like you said. What a great feeling to have a functional phone again..
Thanks Again!!
So i got the phone back up and running android 2.1 and I would like to get it back to the stock 2.3 I had before the whole mess of rooting and stuff. but when i try to upgrade with kies or straight on the phone it ends up failing and telling me to try it again. any ideas why this is happening? or how to fix it.
blackjack54 said:
So i got the phone back up and running android 2.1 and I would like to get it back to the stock 2.3 I had before the whole mess of rooting and stuff. but when i try to upgrade with kies or straight on the phone it ends up failing and telling me to try it again. any ideas why this is happening? or how to fix it.
Click to expand...
Click to collapse
Kies sucks lol
look at my sig the first "go to" has the One Click Odin file to get you to stock and rooted 2.3 ...should take no more then 5 mins to do it
the link on that page for the 1 click odin doesnt work.
Try looking >>HERE<<. There are more one clicks there than you will ever need (hopefully)
Thanks I think I might try one of those. But considering what happened earlier in the week i want to clarify/ask a few ?s about that page. How do I know which Gingerbread to use of the 3 listed? How do I know whether or not to click the one with or without the bootloader? I'm new at this with android but I used to flash roms on my old windows mobile htc TILT.
blackjack54 said:
Thanks I think I might try one of those. But considering what happened earlier in the week i want to clarify/ask a few ?s about that page. How do I know which Gingerbread to use of the 3 listed? How do I know whether or not to click the one with or without the bootloader? I'm new at this with android but I used to flash roms on my old windows mobile htc TILT.
Click to expand...
Click to collapse
if you have never flashed GB bootloaders, you need to. Just oonce will work from that time forward. After you flash bootloaders, it's best to avoid them. A bad bootloader flash is one of the few things that will turn a Captivate into a paperwight. About which GB to use, I would say KK4. Its the same as the Official KK4 that was released. So to recap, flash bootloaders only once, then use no bootloader packages after that.
Im not sure if I unlocked them or not honestly. I know i had the phone rooted at one point and was running Cerberus rom. is there any way for me to check?
If you don't know, flash them.
ok i apologize in advance if this is a stupid obvious question..i got the odin one click and i was looking at the page u referred to me to and im wondering what the kernel is for? you cant place it in the odin one click obviously so is that just to keep things together or do i actually need it?
The kernel links are just to use if you want to root the stock rom. You have to use full Odin for those. Stick with the one click until you feel more comfortable in flashing AND do a lot research before your next flash.
so i got the KK1 gingerbread working and everything seems to work fine but now my data doesnt work. So I cant get ATT 3g or edge or anything the only internet i recieve is wifi. anyone know why this is? or how to fix it. ive tried a reboot and nothing ive tried changing the settings under network settings.