Hello guys,
I'm having a problem with my Galaxy S, I'm noob w/ Android. I read many users(not from here) saying that Lagfix really does a difference in performance, excited, I downloaded GST(Galaxy S Tweaker) and without root, instaled lagfix.
Now my Galaxy S is working, BUT, the home button stopped working and the back button is working as home button, also the camera stopped working, the touch became horrible, I can only connect to computer using Debug mode and everytime that I turn on the cellphone, appears I9000B and before appear the S logo it changes to I9000.
There's something that I can do?
I'm really desperate and don't care if lose data. I only wanna my Galaxy S working as it should be.
Eh. What's the name odd your device. Sounds like you installed lag fix for the international sgs
Sent from my GT-I9000
reflash it back to stock or flash another ROM made for the I9000 or I9000M instead of USA variants
Samsung Galaxy S(i9000)-guys i recently installed the vodoo lagfix, but before it could complete the phone restarted and i was only getting the Galaxy S screen at the startup,it could not go further.....so i did factory reset and the phone is fine now.but i cannot connect to the market where as i can browse the net. during signing in it says temporary problem with the network call customer care.but i dont have any problem with browsing. i am still getting the voice command of vodoo.what do i do now....please please please please HELP !!!! Thanx and regards
P.S i just want to restore m phone back to normal, i have already lost all my apps
hello
Ok on my galaxy I9000 gt i have some problems when i plug in kies and want to update it says Name:GT-I9000
Curent version: PDA:JM1 / Phone:LM1 / CSC:KM1
And then: This divice version can not be updated.
A couple of days a go it allways said taht i ahve the newest 1 , now they give me this. I`m a noob when it comes to this so can some1 please help me?
My second problem is that after i installed allot of things on the phone ..games etc.. the latest thing it was "Igo my way" if i close the phone and open it again it stays allot with that "s" on the screen and does nothing, then the media scaner takes ages to scan, then the phone works in frames sometimes and sometimes really fast, sometimes i loose signal too,..any1 know what can be the problem ? But the moust important part is how to fix the update problem cuz that is gone fix it i think. and if i have to do it manualy how do i do it and witch version to install? please be patiance with the explinations , i`m really new to android. ty
bump, thx in advance for your help
Did you flash jm1 through odin or something? If you flash an unofficial firmware, that's what kies will tell you. If you want to be able to use kies to upgrade, you probably need to flash back to a stock firmware
nwsk said:
Did you flash jm1 through odin or something? If you flash an unofficial firmware, that's what kies will tell you. If you want to be able to use kies to upgrade, you probably need to flash back to a stock firmware
Click to expand...
Click to collapse
no i havent the phone was stock but i mange to do it ..kies needed upgrade , now i need to sort out the other problems. ty for your reply
I have been using some custom rom's around here, Doc's and some Darky's and they were perfectly fine.
Some days ago, I started the SGS Tools application, and got to the "Secret codes".
I was just curious about it, and I got into the "Touch key firmware version"
So there was 2 options, to upgrade the Touch key, or the touch screen.
I pressed the touch key, and then the screen said "PASS" and boom !
The touch keys stopped working.
I tried everything, wipe all, flashing back to 2.1, then back to Darky's, and Darky's Odin. Nothing is working.
It's a driver problem as it seems, can anyone, anyone please help me?
Thanks, I will be so greatful!
I came across a thread in another forum that discussed this touch key problem while I was trying to flash Darky's 9.2. You will need to flash to a stock rom. While in stock, go to your dialer and type the following:
*#*#2663#*#*
Then click Touch key FW update.
The touch keys become unresponsive if you try to update the firmware after a kernel change other than stock. Hope this helps.
Source: http://androidforums.com/galaxy-s-a...flashing-darky-v9-gt-i9000m-minimal-risk.html
xlittle_lambx said:
I came across a thread in another forum that discussed this touch key problem while I was trying to flash Darky's 9.2. You will need to flash to a stock rom. While in stock, go to your dialer and type the following:
*#*#2663#*#*
Then click Touch key FW update.
The touch keys become unresponsive if you try to update the firmware after a kernel change other than stock. Hope this helps.
Source:
Click to expand...
Click to collapse
Hey mate.
Thanks alot! but it doesnt work.
I flashed about 3 rom's. 2.1 rom, original from my country 2.2 rom,
and allways did fw update, but none working.
What can I do?!?
Did you do a complete clean install of your stock rom? What I mean by that is you wipe data/factory reset before and after you flashed your phone's stock rom. As the guide I linked utilized a carrier stock 2.2 rom, try flashing the carrier stock 2.2 for your phone. Wipe data/factory reset in recovery mode, and try the firmware update again via dialer *#*#2663#*#* and select "Touch key FW update" . Reboot your phone.
I have the Bell Mobility I9000M model, as the guide is intended for, but it should work on the international version as well (I'm assuming you are from Asia or Europe?)
Hopefully your touch key issue will get resolved, if not by me, then someone else with more expertise in this forum.
Yes, I have tried all those, but nothng helps.
Someone can help please? thx
help please?
help? please
I have exactly the same problem.##Help
help guys.. please
I have also this problem : (
Has no one any other solution for this problem ?!
Lot's here got this problem, please if someone know's how to fix the problem, please help us all. I tried all, I tried any 2.1,2.2,2.3 rom out there, the JM9 [that shouldve fixed my problem] but non helps.
I finally managed to solve the issue by reflashing to a stock 2.2.1 and using the ##code thingy.
duckbill22 said:
I finally managed to solve the issue by reflashing to a stock 2.2.1 and using the ##code thingy.
Click to expand...
Click to collapse
can you please give me the exact rom you downloaded? thanks.
I came across a thread in another forum that discussed this touch key problem while I was trying to flash Darky's 9.2. You will need to flash to a stock rom. While in stock, go to your dialer and type the following:
*#*#2663#*#*
Then click Touch key FW update.
The touch keys become unresponsive if you try to update the firmware after a kernel change other than stock. Hope this helps.
Source: http://androidforums.com/galaxy-s-al...imal-risk.html
__________________
Download Software
returnix said:
can you please give me the exact rom you downloaded? thanks.
Click to expand...
Click to collapse
The ROM in question was: I9000UGJH2
Sorry, I had to get home to look this up as I only used this ROM to solve the issue and went straight back to Darky 9.3.
I hope this helps
duckbill22 said:
The ROM in question was: I9000UGJH2
Sorry, I had to get home to look this up as I only used this ROM to solve the issue and went straight back to Darky 9.3.
I hope this helps
Click to expand...
Click to collapse
man
thanks you
so much, I really dont know how to thank you.
I will open a thread that will explain to all that this problem happend to them too.
THANKS!
Ditto, I had the same problem, bought the phone from a guy and it already had a custom firmware on it. I screwed up the menu and back keys by upgrading the touch key firmware.
I eventually found this thread, upgraded (or rather rolled back) to the original firmware (in my case I9000UGJL2) and re-applied the touch keys firmware upgrade and voila now my keys work again after a month or two of pulling hair.
nice work and lots of thanks
After a painstakingly long search (upwards of 5 hours, gee thanks SOPA) I finally got ahold of original firmware, flashed and followed the post, worked great Thx! BTW this was for a Canadian Bell GT-I9000M, which I flashed to KC1 to get to work if anybody has similar original firmware finding issues, (took a few trial and errors)
I have the same problem on my galaxy mini, anybody know a galaxy Rom that fix my problem?
hello
ok so i decided to flash my phone
it was on stock 2.3.3 no branding and download mode worked straightoff
i used this rom http://forum.xda-developers.com/showthread.php?t=1421637
now the phone just resets its self all the time.
i have write a it more in detail of what the phone says and does on page 3 and 4 on the thread.
can someone help mefixit please.
ok fixed my phone now with this.
http://droidangel.blogspot.com/2011/10/i9000xxjvt-android-235-samsung-galaxy-s.html
tried flashing the djbrom angain and still that rom does not work keeps saying cant mount.
so goingto give that a miss
can anyone tell me how to get 2.3.6 on
or how to do the lag fix on this rom please
If you're referring to the JW1, here you go:
http://www.multiupload.com/YFZ13NPM98
Got it from Rahulrulez's thread.
To enable the lagfix, use the ext 4 app included in that rom. Everything is pretty much self explanatory from there onwards.