Database Develop

Strange Kaiser Problem with booting

Let me start by saying my Kaiser has been the most reliable and tweak friendly phone I've come across. About 2 weeks ago, however, I started having a strange issue with the boot up of the device from a power off state. Every so often if I boot it, the device hard boots from the internal rom, erasing everything I've changed since burning the rom onto it. I'm convinced it isn't the cooked rom because it worked fine formonths.
Has anyone come across this issue before? I'm more of a computer guy so forgive any illiteracy, but I'm worried it may be a storage problem of some sort.
If anyone has any idea of what is happening, or perhaps knows of a way to log what is happening, please let me know!

After this problem started happening, did you try any other ROMs? If so, did they exhibit the same problem?

Not that I am the world's authority on it but seeing as how I managed to get my IMEI changed with a simple ROM flash...amongst other issues dealing with incomplete flashing etc, seems you could have a corrupted BL, pop into the bootloader screen and have a look if there is any txt on the top right corner....even though it's erratic it could be sorted by a stock reflash and then flashing your personal flavour of ROM...
Vague but hope it helps..

topgunn said:
Not that I am the world's authority on it but seeing as how I managed to get my IMEI changed with a simple ROM flash...amongst other issues dealing with incomplete flashing etc, seems you could have a corrupted BL, pop into the bootloader screen and have a look if there is any txt on the top right corner....even though it's erratic it could be sorted by a stock reflash and then flashing your personal flavour of ROM...
Vague but hope it helps..
Click to expand...
Click to collapse
Haven't had the issue in about a week now (crossing fingers) but there was never any text in the top right. I may try reflashing to stock and then back again as you suggested tonight. I use spb backup so whenever the issue occurs im able to just run an exe and restart for full recovery but id rather not rely on that!

Reflashing stock is definitely a good idea, for a while virtually any 6.5 ROM would have a chance of acting up if you didn't flash back to stock first.

Soft Brick.

Hey guys its been a while since I've even tried to fix my phone cause everyone was saying its dead. But I've been reading stories of people coming back from the G1 logo. So i could really use your help.
Heres the problem, A while back I dropped my old G1 and had to get a new one. Upon looking for the video I used last time to root my phone, I couldn't find it. I searched high and low but to no avail. I figured any video would work as long as it rooted me. So I started up the video. however once i was "done" with it i noticed nothing had changed. So i figured the video was garbage and found another one and started it up. I know, STUPID. Well when i booted my phone after wiping and flashing. It stayed on the G1 logo. I knew the worst had happened. So now i don't know what to do. There have been one or two occasions that I've gotten it to boot loader. So i know i can get there. but what do i do when I get it?
Also, no, I never got to flashing raido's or anything like that. I thought I wasn't rooted so i didn't move on.
I know it was long but I'm getting all the info out there. Please help, I think its possible, and if it is I want my phone back!!!

What were you installing by the way?
EDIT: Made a mistake, thought you were able to boot into recovery.

He does not get to recovery, but into bootloader mode (cam + power on). This is good, as there is a good chance to recover from that.
Try the first section of this guide:
http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_G1/Dream_Firmware_to_CyanogenMod
You have to flash the correct dreamimg.nbh via bootloader. You might need a Goldcard to do so, in certain countries, but lets just hope that is not the case (would be more work...)
€: Some more Info on Bricking your device with Radio/SPL updates, so take care: http://forum.xda-developers.com/showthread.php?t=655097
The guide on cyanogens wiki is considered dangerous at the optional update to HardSPL

[Q] help please! stuck on at&t world phone screen

okay im getting completely frantic right now, i tried to flash the newest cognition ROM from stock 2.1 rooted from recover and it all loaded fine but i kept getting force closes com.android.phone or something and then i was like okay ill just restore my last backup and did that but now it wont boot past the at&t world phone screen and i cant get into recovery. ive read other threads about this but theyre all different situations so i wanted help for my specific situation. i love all the devs help and hard work on this site and i hope my phone is not bricked because ive only had it for about 2 weeks. so please a fast response would be appreciated, i would like to have my phone fixed by tonight thanks in advance guys oh and also i am able to get into download mode i just dont know what that does.

no one knows?

nevermind everyone i got it using odin

Just reflash use this http://forum.xda-developers.com/showthread.php?t=818439 or you can search for odin one click by DG.

Odin. You will be fine. Just search and read. Be careful what you do and try your best to understand what you are doing before you panic.
You were getting fc on cog so instead of reading and re -flashing you panicked then flashed a 2. 1 back up over 2. 2 with voodoo lagfix active. :O it is not the end of the world. I do hope you have a PC and not a MAC. Odin will flash you back to stock but you will need to search and read. Good luck
Captivate
Cog 2.2

I think I'm in a similar boat... tried to flash back to JH7 after getting tired of froyo versions that I didn't like. Now I'm stuck at the AT&T screen and nothing works... no matter what button I hold while I power the phone on, I get nothing. Any advice?
Update: I think I may have something here... found a guide talking about JTAG stuff that suggested holding both volume buttons while plugging in the USB cable... seems to have gotten me to the "downloading..." screen. That's a plus.

Rogers Captivate with Assonance

Hi all, I'm a normal XDA user with my HTC hero.
My girlfriend recently bought the Rogers Samsung Captivate, and had a few issues with it. First the battery life was only lasting half the day. Then one day, it restarted itself 5 times. Then it seemed like it was laggy. At first when she told me about the battery issue I thought, ok maybe if we put a custom ROM on, it may help. So I rooted, put clockwork recovery, then installed Assonance ROM. We seemed to have gotten rid of the lag but the random restarts seemed to persist, then she was having Sms's coming in weird, so I decided we should put it back to stock and get it back to rogers. So i tried doing a restore from clockwork, but it still has the AT&T logo, and when the phone boots, I have a black screen that says no service on the top right, and swipe screen to unlock, but it won't unlock.
All I want is this thing back to stock, no AT&T screen so I can try to warranty this thing.
Thanks in advance for any help, I've done some searching and can't seem to get this thing back to life.
Thanks,
AZ

AbsoluteZero said:
Hi all, I'm a normal XDA user with my HTC hero.
My girlfriend recently bought the Rogers Samsung Captivate, and had a few issues with it. First the battery life was only lasting half the day. Then one day, it restarted itself 5 times. Then it seemed like it was laggy. At first when she told me about the battery issue I thought, ok maybe if we put a custom ROM on, it may help. So I rooted, put clockwork recovery, then installed Assonance ROM. We seemed to have gotten rid of the lag but the random restarts seemed to persist, then she was having Sms's coming in weird, so I decided we should put it back to stock and get it back to rogers. So i tried doing a restore from clockwork, but it still has the AT&T logo, and when the phone boots, I have a black screen that says no service on the top right, and swipe screen to unlock, but it won't unlock.
All I want is this thing back to stock, no AT&T screen so I can try to warranty this thing.
Thanks in advance for any help, I've done some searching and can't seem to get this thing back to life.
Thanks,
AZ
Click to expand...
Click to collapse
Go here....http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S/SGH-I896
Scroll down and you will see a link to the stock Roger's ROM.

Microwave...15 seconds...you don't want to overcook

I have that, i'm trying to install it, but it's taking a long time to start installing update. I've tried reformatting everything, I've tried renaming the Rogers stock to update.zip.
any thoughts on how long it should take to install, or any better instructions on how to get back to stock?
Still stuck at installing update after 15 minutes.
also, is there go instructions on how to get rid of the AT&T Logo, or will the stock rom/firmware fix that?

Ok So, I unzipped the stock firmware and it seems to have installed, but I still get the AT&T logo, and I'm still frozen at the swipe screen to unlock section. I can't swipe at all or do anything for some reason.

AbsoluteZero said:
Ok So, I unzipped the stock firmware and it seems to have installed, but I still get the AT&T logo, and I'm still frozen at the swipe screen to unlock section. I can't swipe at all or do anything for some reason.
Click to expand...
Click to collapse
I'd just like to post that I had this exact same issue when I tried to restore to my original ROM Manager backup, and a solution would benefit both of us.

Auridran said:
I'd just like to post that I had this exact same issue when I tried to restore to my original ROM Manager backup, and a solution would benefit both of us.
Click to expand...
Click to collapse
Did you end up being able to boot ok somehow?

AbsoluteZero said:
Did you end up being able to boot ok somehow?
Click to expand...
Click to collapse
Nope. I'd always be stuck at that black lock screen unable to unlock. After one erase and restore there was a background image instead of blackness, but it didn't go any further. I just decided to stick with Assonance, but that's not really an option for you unfortunately.

so I was wrong right from the beginning, I didn't flash Assonance, i flashed Cognitionv2.3b8. Sorry for the confusion

I clipped this from the above link to the rogers stock rom.
"Be aware when installing AT&T Firmware 2.2 and trying to recover to Rogers stock, you will have a short AT&T display on boot up. One way to remove this is to flash the phone with firmware from a Samsung I9000 model and then reflash it with the Rogers Firmware. This will remove the AT&T logo. However, there is a chance that this method may, in certain circumstances, leave a seemingly random pixlation on screen upon boot-up for the time the AT&T logo was meant to be displayed. A very minor issue and doesn't affect the phone or boot process"
So try to find a stock I9000 rom I guess. The assonance rom is based off the I9000(Or at least that what it says on boot :/). I'm not sure if that will be good enough. I'm running Assonance right now on my fiance's rogers captivate. It's been working great since she has gotten it. So maybe even just flashing Assonance will fix things for you.
As a side note, I returned my x10 with a custom rom on it for warranty and I never heard from them. My understanding(hearsay) is that it doesn't even go to rogers. I'm in Ontario, and I believe it goes to a refurbishing company that is contracted by rogers where they check for water damage.
So I'm not sure where you are located but it may be the same.
(Disclaimer: I'm not saying you WONT get billed for the phone if you send it back with custom rom on it.. I'm simply saying that I didn't and I have heard of others not being as well. Perhaps we were just lucky)
Good Luck.
If you try this let me know if it works, should I ever need to send hers in for warranty.

check your pm

[Q] [SOLVED] Boot looped, Can't use Recovery mode..

Hi everyone.. after hours and hours of reading and studying on this website I really got myself into a mess and I just can't seem to climb out of it.. I desperately need some grade A help..
To be descriptive, I was trying to flash Serendipity 7, I was following the steps, used odin 3 1.7, I put all the files where they needed be, and followed it down to a tee, I pressed start, and then my phone goes into a boot loop... So I google around to look for solutions, and I thought I found one, well after I flash this "P-SBL.tar.md5" some tar file that is meant to fix the 3 button recovery mode issue. (Basically my cappy can't select anything in recovery mode due to it not having a "ok" button..) So I try it.. and not my recovery mode is littered with multi colored lines.. and I can't seem to get them to go away.
If anyone can help me I would forever be in your debt.. I would be happy just to go back to stock 2.2 if possible.. or perhaps advice on getting serendipity 7 to work.
I could make it happen if only I could get my recovery mode to work. D:
Please anyone help, I'm in dire need..
Thanks!

Search for "stock kb2 adam outler"
Then after you get back to stock, stay that way until you have done about 12 more hrs of research and reading. You were lucky that you didn't hard brick your phone, and you don't realize it. Don't just flash something because you"think"it will fix it. Know what you are flashing and what it will do to your phone. And you can call me an a#&h&$#if you want, but i believe most of the regular users here would agree me.

^
+ 100
Totally agree !!
suoh18, If....wow....whoa....dude don't be so trigger happy to flash. You were this " | " <---(that is a thin thin line by the way) to having a brick.

They need to get rid of that 3 button fix, its bricked more phones than I know, it should include both bootloaders and not just the one, I would contact Adam Outler like mrhaley said, to see if he can help, 3 button fix brick may require a jtag.

I know I was.. I was just reading what everyone was saying how easy it was.. it was my first flash and I guess it just back fired on me.. x_x
I really appreciate your help a ton, you have no clue how thankful I am.
I'm downloading what I need right now and I'm praying it works, thank you again so much.

^
Keep us posted on the end result.

I just used the program.. and it very well got my phone back on the right track. The boot looping stopped, it's back on the recovery mode that I can actually use, but after it loads it just goes to a black screen and keeps vibrating, I read that if it doesn't work the first time to check the flash bootloaders button. so I'm going to reboot one more time, then try that.
Thanks a ton guys, you really are great.
EDIT:
Which I think I need to do, because I still have a weird Galaxy S starting screen that appeared after I tried to flash serendipity.
EDIT 2:
Okay, After re-flashing the bootloaders it removed that screen that shouldn't have loaded, but I still get a black screen after the boot and nothing shows up..
I can enter and exit my recovery and download modes fine..
EDIT3:
Okay.. I went back into recovery mode and literally just wiped everything I could.. cache, user data, internal card, and after I rebooted again, viola it worked.
I'm so happy and I am seriously very appreciative. You guys are great and there has always been a reason why I respect this community so much.
Thanks again everyone that helped me, I don't know how much I can say it, but really, thank you so so so much, you are amazing.