Related
GingerDX lags for 3 seconds every time when it has to turn screen on to accept phone calls.. also lags few seconds everytime i want to unlock.. any fixes for this?
or isit a CM7 problem?
Zj89 said:
GingerDX lags for 3 seconds every time when it has to turn screen on to accept phone calls.. also lags few seconds everytime i want to unlock.. any fixes for this?
or isit a CM7 problem?
Click to expand...
Click to collapse
i have the same problem, when someone calls me the phone starts ringing but the screen stils for 3/5 seconds only showing the statusbar.
i only get this only in call screen 1-2 seconds lag but don't have lag in look screen gdx 011 no o/c.
i remove some of the system apk files that i don't use ie theme chooser, a theme and some other's
Try using GoDialerEx and see if the problem persists. Could just be an oddity with the stock dialler.
You wipe the phone before putting the rom on your phone? I didn't at first but did just last night and it fixed most of my issues TBH.
yeah i always do factory wipes before rebooting new roms.. i didn't have this problem with froyobread so i'm guessing its a cm7 problem.. =(
Zj89 said:
yeah i always do factory wipes before rebooting new roms.. i didn't have this problem with froyobread so i'm guessing its a cm7 problem.. =(
Click to expand...
Click to collapse
Maybe I get lag sometimes but it is not to that level and I use GingerDX V011. Usually a second or so. Was way worse before I did a full wipe. Sound distortion and sometimes couldn't even answer calls as phone froze.
I didn't realise the difference a full wipe would make, how naive of me
my mobile is x1i.
my mobile battery is heated up when i net browsing, internet sharing, playing videos & playing audios too. i cannot tocuh by battery after 10 minutes. then battery goes down & phone goes off.
i changed my battery & charger. & flashed my rom aiso. please help me..............
thanks...............
I think it's normal,every x1 will be like that
nuwanpradeep20 said:
my mobile is x1i.
my mobile battery is heated up when i net browsing, internet sharing, playing videos & playing audios too. i cannot tocuh by battery after 10 minutes. then battery goes down & phone goes off.
i changed my battery & charger. & flashed my rom aiso. please help me..............
thanks...............
Click to expand...
Click to collapse
this certainly isn't normal.
yes, battery gets warm while charging, expecially via usb. it also gets warm when wifi is active continously for a long time (like surfing an hour). warm = 40°C max. it gets really hot when charging with wifi active during standby (this requires a change in registry though, standard is wifi being disabled in standby).
but what you are describing (very hot, the activities you describe, empty in 10 minutes) isn't normal! sounds like a broken battery (hw-failure). have you tried flashing another rom?
You should see what kind of rom you are using cuz may be if it overclocks your CPU, this might cause heat ... so, try flashing another rom that doesn't overclock your CPU ... if not, then this might be a hardware problem ... I hope this helps, if not, I'm sorry ...
thanx for reply me dear.............
bt i have a another problem with this,
phone heating problem is over automatically. but with that microphone & primary (hearing when calling)speaker dosent work. bt front speaker works. mp3 & video sounds works. i reset my phone more times. but it wasnt ok. nw phone cannot make a call or hear a call because tha the both of them are i think burned.
I've not had that issue before .... I've the normal heating while charging only ... but I think you might want to flash another rom ... cuz this just seems to be too many problems and it might be cuz of the software ... so, try to flash another rom, if the problem presists ... then seek hardware help ... or I hope someone here may know the reason
thanx for reply me dear.............
bt i have a another problem with this,
phone heating problem is over automatically. but with that, microphone & primary ( calling)speaker dosent work. bt back loud speaker works. mp3 & video sounds works. i reset my phone more times. but it wasnt ok. nw phone cannot make a call or hear a call because the both of mic & apeaker are............. i think burned. if i repair it with new mic & speker, i m not sure the phone will be heating again?...................
I think these are too many problems you are having, so I would suggest a factory reset from the reset button under the battery cover or that you flash one of the roms on the site here ... It seems mostly software problems .... so, try flashing one of the roms ... I use 826X which doesn't overclock, so that might also help with ur overheating problem ... if flashing a new rom doesn't help, may be u should seek some hardware assistant but I think mostly it will solve it ... or factory reset might do the trick ... but this is as far as I know ... hope somebody who had the same problem may present a solution
yes i reset it many times. & im not overclocked it. is that my micriphone gone. there is something , if i unplugged my earphone that microphone icom shows on phone display. why is that. ithink it willbe a key point. bt mp3 playing is normal. audio qualitity is normal.
Hi all!
After being for a long time a neopeek.com thread only,i've choosen to post the kernel here too..
Please note that i'm using codesourcery's toolchain 9-2010
If the kernel fails at booting
Please check this startup and this haret
Please change
Code:
set INITRD_OFFSET 0xSOMETHING
to
Code:
set INITRD_OFFSET 0xA00000
in startup.txt
If you don't have the line in startup,add it,it must be anywhere before "boot"
DOWNLOADS
V12
http://dl.dropbox.com/u/27345952/2.6.27/2.6.27.46_EXT3-01377-g404dbe9.7z
V11
http://dl.dropbox.com/u/27345952/2.6.27/2.6.27.46_EXT3-01375-g6079b24.7z
V10
http://www.mediafire.com/?282q7didmlm4hsg
V9
http://www.mediafire.com/?vsqy8i8l2ft6lt7
V8
http://www.multiupload.com/Y1OY44WA4H
CREDITS
Alex[sp3dev] for the gpu overclock,for the charger and for many X1 fixes..
Blackra1n for help with the overclocking part
Xdandroid team for the kernel source
Caliban2 for testing everything I uploaded
Everyone who has helped me improving this kernel with reviews and tips
Everyone who has bundled this kernel in the builds
SOURCES
Kernel
CHANGELOG
V12
642200 MHz now runs with 200 Mhz AXI and AHB clocks
Fixed a small issue with AXI and AHB clocks,them weren't set properly
PLL clock is now mantained after panel blank-unblank
V11
Added some scaling steps,642200 MHz and 100800 MHz
Last frequence(642200) runs off PLL3,making a small speed bost
AXI and AHB are clocked at 160 MHz for PLL3,when making it higher the phone became unresponsive and slow
Default governor is On demand if you don't use my new rootfs
Kernel uses now 642200 as default max frequency
CIFS is back
V(R) is now default I/O scheduler,however you can always go back to No-op
Worked a bit on Kovksy battery meter,should be a bit more responsive now
V10
EXPERIMENTAL,Topaz should boot now
Kovsky battery fix,now is being more precise
Reverted to the old way to handle clock,doesn't bring more performance,could make the battery last a bit more
V9
EXPERIMENTAL,EXT4 support
Kovsky battery fix,now is being read properly
CIFS is being built as a module
No-Op I/O scheduler
Small but useful change in the way cpu handles clock
V8
Partially fixed kovsky battery meter
Now battery discharges and charges,is just bad calibrated
DISCLAIMER:
If your phone(or SD-CARD) burns,explodes,or does unexpected things when using my kernel i take no responsability.
BUG LIST
Camera not working on X1,that's a common issue,pheraps it's time to backport from alex's .35
Class 6 and above sd-cards don't work well on blackstone
Bundle
Since ext3 is bringing good results and since everyone is saying good things about it
I've decided to make it more noob friendly.
DOWNLOADS
V9[BUNDLE]
V8
V7
V6
V5[BUNDLE]
V4[BUNDLE]
INSTRUCTIONS:
Please read carefully README.txt
If you can't extract it,please download latest 7zip..
NOTES FOR DEVELOPERS/CHEFS:
You need to update /META-INF/com/google/android/updater-script to make the build working with ext3
Change all the format and mount lines to ext3 instead of ext2.
Example
Code:
format("ext2", "EMMC", "/dev/block/mmcblk0p2");
has to be
Code:
format("ext3", "EMMC", "/dev/block/mmcblk0p2");
CHANGELOG:
V9
ROOTFS: Rel_path fixed
ROOTFS: Removed some hardcoded /sdcard/npkboot,now system can run from any folder
ROOTFS: Added some checks for the existance of CSV files in root of the SD-Card
ROOTFS: Boot will now fail if no CSV are found to avoid missing audio
ROOTFS: Updated Gingerbread's init.rc
KERNEL: New Acoustic code,improves audio in all the system,allows more tweaks to be performed by editing manually CSV files
KERNEL: Fixed static sound with data enabled
KERNEL: Brought back wlan.ko
KERNEL: Kexec working
BUILD : New GBX0B build included
BUILD : This build contains the new acoustic code
BUILD : Completely based on latest Gingerbread release by XDANDROID team,with some small tweaks for speed and working with CWM
V8
KERNEL:642200 MHz now runs with 200 Mhz AXI and AHB clocks
KERNEL:Fixed a small issue with AXI and AHB clocks,them weren't set properly
KERNELLL clock is now mantained after panel blank-unblank
ROOTFS:New RIL and new Lights.ko for froyo
ROOTFS:Updated init.rc's
V7
KERNEL:Added some scaling steps,642200 MHz and 100800 MHz
KERNEL:Last frequence(642200) runs off PLL3,making a small speed bost
KERNEL:AXI and AHB are clocked at 160 MHz for PLL3,when making it higher the phone became unresponsive and slow
KERNEL:Kernel uses now 642200 as default max frequency
KERNEL:CIFS is back
KERNEL:V(R) is now default I/O scheduler,however you can always go back to No-op
KERNEL:Worked a bit on Kovsky battery meter,should be a bit more responsive now
ROOTFS:"Performance" is now the default governor
ROOTFS:Fixed init.d support
V6
KERNEL:Reverted the screen on/off frequencies
KERNEL:Kovsky battery should be more precise
ROOTFS:init.d support
V5
KERNEL:Kovsky battery working
KERNEL:EXT4 is back
KERNEL:No-Op is the I/O scheduler now
ROOTFS:XDANDROID partition layout can be used now
Read readme please
V4
KERNEL:Some small clocks changes
ROOTFS:Things that needs an explanation,please read readme
V3
KERNEL:Reverted some changes to Epson panel (Kovsky,Blackstone and RAPH800)
KERNEL:Added JB's audio stuttering fix/hack for Diamond and Blackstone
V2
KERNEL:Reverted turbo to 960 MHz
ROOTFS:Enabled fail,this is going to stop boot process when no partitions are made.
ROOTFS:Readahead back to 1024
V1
Initial Release
Sources:
KERNEL
ROOTFS
INITRD
CREDITS TO:
Neopeek for Neofroyo and CWM
Xdandroid team for the kernel,rootfs source and inird
Turbolapin/lapin for the inird repacking trick,really really thank you!
well, I've tested your V10 Rom with an EXT2 rom which is SenseDroid V9 and it's amazing
but two issues:
1. Wifi doesn't seem to work for some reason even when turned on in winmo
2. There is this weird sound that comes from the speaker every few seconds
Other than that ... The kernel is great and fast and I love it ...
I hope I have helped and I'm sorry I'm new to all of this and I'm trying to learn as much as I can ... I hope I don't bother you with my questions and reports
Hello Midnight,
nice to see this kind of topic here, I think many X1 users didn't find it at neopeek's site in Blackstone, Topaz (etc) section. Hope you will get better X1 feedback here.
I've tested V9 and V10 kernels on Jerrytan's Honeydroid with EXT3. I think both have slightly higher battery consumption than old Ygge's Turbo kernel.
Battery reading is still in both kernels literally "jumping" around the right value and it is changing several times per minute. But in V10 it seems a little bit better.
And as it was already said there is a strange sound comming from phone speaker in V10, when phone network is used, like when you put phone near some speaker.
I didn't tested wifi.
Thanks for your work and good luck in further development.
frybend said:
Hello Midnight,
nice to see this kind of topic here, I think many X1 users didn't find it at neopeek's site in Blackstone, Topaz (etc) section. Hope you will get better X1 feedback here.
I've tested V9 and V10 kernels on Jerrytan's Honeydroid with EXT3. I think both have slightly higher battery consumption than old Ygge's Turbo kernel.
Battery reading is still in both kernels literally "jumping" around the right value and it is changing several times per minute. But in V10 it seems a little bit better.
And as it was already said there is a strange sound comming from phone speaker in V10, when phone network is used, like when you put phone near some speaker.
I didn't tested wifi.
Thanks for your work and good luck in further development.
Click to expand...
Click to collapse
izzyk said:
well, I've tested your V10 Rom with an EXT2 rom which is SenseDroid V9 and it's amazing
but two issues:
1. Wifi doesn't seem to work for some reason even when turned on in winmo
2. There is this weird sound that comes from the speaker every few seconds
Other than that ... The kernel is great and fast and I love it ...
I hope I have helped and I'm sorry I'm new to all of this and I'm trying to learn as much as I can ... I hope I don't bother you with my questions and reports
Click to expand...
Click to collapse
Is the speaker bug present with xdandroid kernels?
Wi-fi worked with V9,so something is wrong build side..
I dunno about the Xdandroid kernel as I have never used it ... I just downloaded the files and over wrote them on a Turbo kernel and changed the start-up file to yours ...
The speaker just does a sound close to the one when u put ur phone next to the speakers like it was said ... but it's coming from the speaker of the phone itself ...
Well, I'm gonna wait for Jerrytan's new EXT3 Rom ... hopefully this week and I'll further test your kernel and give u more feedback ... thanks for your efforts
I've never used xdandroid kernels too. But the speaker sound is messy only in V10, in my case V9 was fine in this matter.
And I forgot to mention that the phone speaker is always on...
WOW!!!Tnx dear Midnight for this awesome release.........
I'll replace it with V9 ASAP
and one question.....randomly,when I press my X1's power button to check the clock or sth,My device screen get back and it dies,I forced to reset my device by pressing the reset key to make this issue solved..........
Is it solved in this Kernel??
reza3310 said:
WOW!!!Tnx dear Midnight for this awesome release.........
I'll replace it with V9 ASAP
and one question.....randomly,when I press my X1's power button to check the clock or sth,My device screen get back and it dies,I forced to reset my device by pressing the reset key to make this issue solved..........
Is it solved in this Kernel??
Click to expand...
Click to collapse
I've not seen any SODs recently..
I don't know if this helps, but:
The sound is active when data connection (EDGE/GPRS) is used. It stops right after a phone call and the speaker is off for a while. But it starts again after a while, maybe 2-3 minutes and the speaker is on again.
I don't know if this is kernel related, but i can't recieve mms messages. The truth is, that I didn't test this with other kernels cause I don't usually use MMS.
I've also tried V9 ... the hizzing sound is less frequent but it's always on when I'm using internet mobile as mentioned before ... V9 is very fast and stable. with an EXT3 rom it was working amazing ... I think it uses a bit more battery than the Turbo kernel but with the option to charge from Android itself ... I don't mind that as I mostly carry a charger around if I'm going out for long ...
also, there's a second of black screen after you press the power button ... the hizzing sounds stops once the screen is off ...
The other only problem I see so far the battery meter but u are already working on that in V10 ... Thanks so much for the great efforts
izzyk said:
I've also tried V9 ... the hizzing sound is less frequent but it's always on when I'm using internet mobile as mentioned before ... V9 is very fast and stable. with an EXT3 rom it was working amazing ... I think it uses a bit more battery than the Turbo kernel but with the option to charge from Android itself ... I don't mind that as I mostly carry a charger around if I'm going out for long ...
also, there's a second of black screen after you press the power button ... the hizzing sounds stops once the screen is off ...
The other only problem I see so far the battery meter but u are already working on that in V10 ... Thanks so much for the great efforts
Click to expand...
Click to collapse
Hey dear friend,tnx for ur reports....
But I hear hizzing when I'm not using internet too!!
I have pressed the power button several time to sleep and wake up my device to check the hizzing....no changes!
I say tnx dear Midnight again
super fast and stable.....But the battery drains so fast for me,maybe 5 6 hours(in less uses than normal use)
speaker hizzing,and still I have to turn speaker on for incoming call to hear my friend voice[I don't know how this issue is solved for somebodies]
frybend said:
I don't know if this helps, but:
The sound is active when data connection (EDGE/GPRS) is used. It stops right after a phone call and the speaker is off for a while. But it starts again after a while, maybe 2-3 minutes and the speaker is on again.
I don't know if this is kernel related, but i can't recieve mms messages. The truth is, that I didn't test this with other kernels cause I don't usually use MMS.
Click to expand...
Click to collapse
izzyk said:
I've also tried V9 ... the hizzing sound is less frequent but it's always on when I'm using internet mobile as mentioned before ... V9 is very fast and stable. with an EXT3 rom it was working amazing ... I think it uses a bit more battery than the Turbo kernel but with the option to charge from Android itself ... I don't mind that as I mostly carry a charger around if I'm going out for long ...
also, there's a second of black screen after you press the power button ... the hizzing sounds stops once the screen is off ...
The other only problem I see so far the battery meter but u are already working on that in V10 ... Thanks so much for the great efforts
Click to expand...
Click to collapse
reza3310 said:
Hey dear friend,tnx for ur reports....
But I hear hizzing when I'm not using internet too!!
I have pressed the power button several time to sleep and wake up my device to check the hizzing....no changes!
I say tnx dear Midnight again
super fast and stable.....But the battery drains so fast for me,maybe 5 6 hours(in less uses than normal use)
speaker hizzing,and still I have to turn speaker on for incoming call to hear my friend voice[I don't know how this issue is solved for somebodies]
Click to expand...
Click to collapse
I don't have data connection,so i can't test this..
I can't see why this bug is present..
about battery drain,uhm..,trying to fix it..
I get an incoming call....that was OK....strange..
seems that it sometime happens.....
tnx Mr boss
Thanks so much for replying ... I hope all these issues I report don't bother you ... I'm just trying to help improve this kernel
another issue I realized is that sometimes when the screen sleep for about an hour, it doesn't seem to wake up and when I slide the keyboard I see the lights when means it's working but the screen never wakes up ... is there a way to solve this? this testing with an EXT3 rom and V9 of your kernel
izzyk said:
Thanks so much for replying ... I hope all these issues I report don't bother you ... I'm just trying to help improve this kernel
another issue I realized is that sometimes when the screen sleep for about an hour, it doesn't seem to wake up and when I slide the keyboard I see the lights when means it's working but the screen never wakes up ... is there a way to solve this? this testing with an EXT3 rom and V9 of your kernel
Click to expand...
Click to collapse
Panel collapse doesn't work as it should,and i guess that the CPU throttling isn't working well either
Can anyone tell me if this battery life is nice?
15 seconds of Wi-Fi,1 hour of games,3 or 4 10 minutes calls,30 texts made the battery go from more or less 80(Can't remember the exact value from wm) to 50 in android in 4 hours?
EDIT:Can anyone with the speaker bug provide me dmesg and logcat when you hear that sound?
I recharge my phone after about 7 hours[78% to 20% and then It got off]
that was not bad for an android ROM for me,But u lost just 30% for 4 hours of hard working :-o ......I mean gaming and voice calling and texting....But my phone was just in standby and I seldom used it.......maybe about 30Mins
well, this battery usage sounds good ... 4 hours with using the phone and 30% only sounds good ... this means the phone can last for about 12 hours when fully charged ... but could u please test it with more wifi usage as this will test the battery more as u know how android likes to be connected to the internet all the time whether wifi or 3G ... but 1 hour of games should also test the battery ... so, I guess that sounds good ... great job man
about the dmesg and logcat ... I hope someone with experience can help with that ... perhaps we will get more feedback when Jerrytan tests it or makes his SenseDroid an EXT3 Rom, cuz many people use that Rom which will provide more testing for the kernel ... I probably can't help cuz I don't even know what these mean, let alone get them I'm sorry ... also, I'm gonna be using winmo more for the time being with an old EXT2 Rom sometimes as I have too much studying to do ... so, I wish I can help, I'm sorry ...
but in 3 weeks time, I'll be done and hopefully do my best to help with everything ... Thanks so much for the great efforts
izzyk said:
well, this battery usage sounds good ... 4 hours with using the phone and 30% only sounds good ... this means the phone can last for about 12 hours when fully charged ... but could u please test it with more wifi usage as this will test the battery more as u know how android likes to be connected to the internet all the time whether wifi or 3G ... but 1 hour of games should also test the battery ... so, I guess that sounds good ... great job man
about the dmesg and logcat ... I hope someone with experience can help with that ... perhaps we will get more feedback when Jerrytan tests it or makes his SenseDroid an EXT3 Rom, cuz many people use that Rom which will provide more testing for the kernel ... I probably can't help cuz I don't even know what these mean, let alone get them I'm sorry ... also, I'm gonna be using winmo more for the time being with an old EXT2 Rom sometimes as I have too much studying to do ... so, I wish I can help, I'm sorry ...
but in 3 weeks time, I'll be done and hopefully do my best to help with everything ... Thanks so much for the great efforts
Click to expand...
Click to collapse
I don't have 3G,wifi still uses a lot of battery,I don't think it will last more than 2h with wifi on..
I'm going to upload the kernel..
my wifi was off today,except that for 10 mins that I would check something on internet........
BTW,If my wifi be turn on and I don't use it[just it be connected to my modem]it will drain my battery so fast??
u meant a new kernel,ha?
I installed minicm 4.0.2 with naa-jb-03. Things are working fine, but there is a problem with wifi. it is connecting well, but after a small amount of data traffic, the phone restarts. i can load 1-2 webpages and then reboot. the same when i use market or other internet applications. what am I doing wrong?
I am pretty sure that's a RAM issue. No problem with WiFi.
I think you were right. i turned off the zRam setting and it worked for a few hours. but now doesn't matter what i do, when wifi is on, the phone get bootloop, just a full wipe/reset solves the problem. maybe this rom doesn't like me :/
Have you overclocked your cellphone? If you did so, then it's highly likely that that's the problem. try lower down a little the max value, and set the lower value a little higher...
default max value is 600 mhz.
On a side note, I experience reboots every 5 hours aprox... they are not that often, but still annoying.
I don't recommend overclocking; it's unnecessary, almost.
I didn't use overclock. i tried to install other rom with other kernel, but after the flashing the phone got bootloop at the kernel part :S
so i installed the stock kernel and 2.1. after that flashed naa kernel and minicm, and now it seems to work.
i also got wifi problem..how new update nightly fix the wifi
Sent from my E15i using xda app-developers app
I think i figured ot my problem. I tried also minicm9, and the same problem appeared. I found posts in the topic, that other people experienced the same on eduroam networks. I'm also trying on an eduroam network at my university, so the main problem is with wifi. Is there maybe a solution to fix this thing?
My brother's galaxy note have been facing serious sod problems since he bought the phone at Nov 2012. After he faced it the 1st time , he sent to SC and got it back. After 1-2months the problem came again and he asked for my help. I persume it was because the malaysian firmware of the ICS was somewhat unstable from what i read from forums here and there. So i changed the firmware to JB duno from which country when it came out in MAC. After a week or so. The problem reappeared . So I just decided to root and chnge the kernel and also the ROM. Changed the ROM to a stock rom and a kernel. Still the problem persist. I'm out of options. Went to the ****ty SC and the idiots just factory reset the phone and give u back. BUNCH OF RETAR*S . (sorry for my languange)
Hope someone here may help me out with my problem. Thanks a million :laugh:
Check all the apps you have installed maybe you find the bad one whose causing it as you have mentioned it comes after sometime of installing a fresh rom and have you tried any aosp rom maybe that will fix the issue
Sent from my GT-N7000 using Tapatalk 2
abhinav quietly brilliant said:
Check all the apps you have installed maybe you find the bad one whose causing it as you have mentioned it comes after sometime of installing a fresh rom and have you tried any aosp rom maybe that will fix the issue
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
I just installed an aosp rom (PA) and I hope it fixes the problem. Well I've seen the amount of apps installed in the note and its jst a quarter the amount I have in the Galaxy S2 and my S2 works like a charm. The note has been giving me headache ever since I got it from my brother. Hope this does solve it , if not I guess its something else maybe hardware
Phone sod twice on paranoid android. FML! Guess im visiting SC tmrw again.
Same problem with me..
My Note 1 has SOD since 1st time bought it..
be patience to install JB --> still SOD
change kernel to SpeedMod 5.3 --> SOD again
change kernel to PhilZ --> sometimes SOD
I have read many information that related with SOD in galnote 1, my opinion it is related with hardware too.. sometimes
or it is related with kernel... it can not wake from deep sleep..
anyone have another better suggestion to cure this ?
if u're using pure stock rom still facing the same problems then definitely is hardware issues！
if ur device still under warranties suggest bring to SC ask them do a thorough check on it n let them know what's going on actually...
Yes, I use stock ROM still has SOD,
so it's hardware issue for sure...
but I will keep the phone for now because sometimes SC doesn't give solution to this..
psywarx said:
Yes, I use stock ROM still has SOD,
so it's hardware issue for sure...
but I will keep the phone for now because sometimes SC doesn't give solution to this..
Click to expand...
Click to collapse
Yeah and they will give your phone back only doing a factory reset lol
Sent from my GT-N7000 using Tapatalk 2
I too get this SOD once a week on my GT-N7000
Phone status when this happens:
stock JB(earlier ICS), non-rooted, data connection, wifi, GPS, bluetooth all disabled. Battery mostly above 80%.
Gmail, Google+, Facebook and all other social n/w apps disabled (yes, i am an oldtimer )
During SOD, if a third party calls my number, he hears it ringing, but my handset is dead as dodo (quite dangerous as the calling person may think i am not answering it)
i used to get this when it was on ICS and still getting it after i upgraded to JB.
Most of the time, SOD occurs during wee hours in morning ( i used battery monitor app that logs battery stats every 10 minutes to check the time when this happens).
Sometimes it occurs when the phone is in my jeans back pocket. phone needs a 10 second press on pwr switch to restart it.
Turning off the "power saver" mode seem to reduce the probability of SOD.
i have taken this phone to SC and they re-flashed the JB.
i told the SC chap that i have already done this and couple of factory resets, but he said that they do "much more" than just re-flashing through kies like calibrating camera, bluetooth )
does anyone in the know, know if this is indeed true ?
Thanks
-mprab
updates...
After 2 days of re-flashing at a samsung authorised service center, i got SoD 2 times in a period of 12 hours.
once last night and second time when i was traveling to office.
Last night i installed some bare-minimum apps back after waiting 2 days for any SoD to happen in "stock" condition.
Well.... i did not pay 30K to use the GNote as just a phone, so installed some basic apps (Battery monitor, Bangalore BMTC, RealCalc, GPS Test, ES File explorer and a first time app StatusLogger)
phone went dead at 1:00 am in morning and as usual there was no wakeup alarm.
phone was warm to touch when it was lying dead. The battery which was 96% at 00:30 AM had gone down to 54% at 7:00 AM.
Status logger did not show any loss of GSM signal which might have resulted in phone transmitting at higher power/hunting for signal etc.
The "radio" seemed working, because when i made a call to the dead phone from my landline, i could hear the phone ring instead of expected "phone is switched off" message i was expecting.
So this has to do with application processor going in some infinite loop.
Uninstalling all apps is NOT an option.
anyone know if we can establish any debug connection to phone and know what the hell CPU is up to in this situation ?
any processor logger that will periodically log all the processes running on phone ?
SOD resolved... not a single one since 6 months.
Hey guys, just wanted to share this info with you, I had SOD's like anything and did all freakingly possible things right from flashing roms to kernels, speed up CPU, banging my head in front of the dumb witted morons at samsung service... to get rid of that pain. What helped me was an app called "WAKELOCK" by darken which is merely 72kb in size but works wonders, not a single SOD after that. What u need to do is.... it has a list of presets that makes sure your cpu stays up. You need to select the preset called "partial wake lock" which is at no. 4, and viola...
It ensures that the CPU is running. No SOD ever after. Also, you need to make it autorun on boot from the options. Yea, it does eat up batter a bit more but its definitely manageable. I still need to charge my note only at night.
Just to be sure, I uninstalled it and guess what, SOD returned. So, do try it, I hope it helps...